This adds and optional ", immutable" to the end of a `.globaltype`
declaration. I would have prefered to match the `.wat` syntax
where immutable is the default and `mut` is the signifier for
mutable globals. Sadly changing the default would break backwards
compat with existing assembly in the wild so I think its best
to stick with this approach.
Differential Revision: https://reviews.llvm.org/D87515
This matches the changes made to handling of zlib done in 10b1b4a
where we rely on find_package and the imported target rather than
manually appending the library and include paths. The use of
LLVM_LIBXML2_ENABLED has been replaced by LLVM_ENABLE_LIBXML2
thus reducing the number of variables.
Differential Revision: https://reviews.llvm.org/D84563
Currently we treat SHT_RISCV_ATTRIBUTES like a normal section and
concatenate all such input sections, yielding invalid output unless only
a single attributes section is present in the input. Instead, pick the
first as with SHT_ARM_ATTRIBUTES. We do not currently need to condition
our behaviour on the contents, unlike Arm. In future, we should both do
stricter validation of the input and merge all sections together to
ensure we have, for example, the full arch string requirement, but this
rudimentary implementation is good enough for most common cases.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D86309
Following 97febb1, fix the out-of-memory error associated with buffering the output
in-memory by writing to an allocated file with the minimum offset and running it
on ppc system-linux only.
Peer reviewed by: nemanjai
Following 0becc27ebf, `ppc64-pcrel-long-branch-error.s` fails in some
environments with out-of-memory errors associated with buffering the
output in-memory. Since the alternative of writing to an allocated file
is also known to cause problems, we will disable the test
unconditionally (pending a mechanism to disable the test selectively).
In this patch, a pc-rel based long branch thunk is added for the local
call protocol that caller and callee does not use TOC.
Reviewed By: sfertile, nemanjai
Differential Revision: https://reviews.llvm.org/D86706
Found such a relocation while testing some real world programs.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D86642
We can have GOT_LOAD relocations that reference `__dso_handle`.
However, our binding opcode encoder doesn't support binding to the DSOHandle
symbol. Instead of adding support for that, I decided it would be cleaner to
implement GOT_LOAD relaxation since `__dso_handle`'s location is always
statically known.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D86641
These opcodes tell dyld to coalesce the overridden weak dysyms to this
particular symbol definition.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D86575
Since there is no "weak lazy" lookup, function calls to weak symbols are
always non-lazily bound. We emit both regular non-lazy bindings as well
as weak bindings, in order that the weak bindings may overwrite the
non-lazy bindings if an appropriate symbol is found at runtime. However,
the bound addresses will still be written (non-lazily) into the
LazyPointerSection.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D86573
It seems to be failing on some Google Buildbots.
This diff also includes a minor fix for the install name of one of
libSystem's re-exports. I don't think it's the cause of the test
failure, though. The wrong install name just meant that the symbol
lookup failure would still happen, but it would have been caused by the
re-export not being found, instead of the arch failing to match.
Differential Revision: https://reviews.llvm.org/D86728
Binutils generated sections seem to be padded to a multiple of 16 bytes,
but the aux section definition contains the original, unpadded section
length.
The size check used for IMAGE_COMDAT_SELECT_SAME_SIZE previously
only checked the size of the section itself. When checking the
currently processed object file against the previously chosen
comdat section, we easily have access to the aux section definition
of the currently processed section, but we have to iterate over the
symbols of the previously selected object file to find the section
definition of the previously picked section. (We don't want to
inflate SectionChunk to carry more data, for something that is only
needed in corner cases.) Only do this when the mingw flag is set.
This fixes statically linking clang-built C++ object files against
libstdc++ built with GCC, if the object files contain e.g. typeinfo.
Differential Revision: https://reviews.llvm.org/D86659
This matches lld-link's own default.
Add a new command line option --no-dynamicbase for disabling it.
(Unfortunately, GNU ld doesn't yet have a matching --no-dynamicbase
option, as that's the default there.)
Differential Revision: https://reviews.llvm.org/D86654
Whilst reviewing some internal testing, I noticed a couple of holes in
coverage of mergeable sections containing symbols. This patch addresses
these holes:
1) Show that mid-piece symbols have their values updated properly when
pieces are merged.
2) Show the behaviour of symbols in mergeable pieces when --gc-sections
is enabled.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D86543
Previously, we were only emitting regular bindings to weak
dynamic symbols; this diff adds support for the weak bindings too, which
can overwrite the regular bindings at runtime. We also treat weak
defined global symbols similarly -- since they can also be interposed at
runtime, they need to be treated as potentially dynamic symbols.
Note that weak bindings differ from regular bindings in that they do not
specify the dylib to do the lookup in (i.e. weak symbol lookup happens
in a flat namespace.)
Differential Revision: https://reviews.llvm.org/D86572
Previously, the BindingEntry struct could only store bindings to offsets
within InputSections. Since the GOTSection and TLVPointerSections are
OutputSections, I handled those in a separate code path. However, this
makes it awkward to support weak bindings properly without code
duplication. This diff allows BindingEntries to point directly to
OutputSections, simplifying the upcoming weak binding implementation.
Along the way, I also converted a bunch of functions taking references
to symbols to take pointers instead. Given how much casting we do for
Symbol (especially in the upcoming weak binding diffs), it's cleaner
this way.
Differential Revision: https://reviews.llvm.org/D86571
The re-exports list in a TAPI document can either refer to other inlined
TAPI documents, or to on-disk files (which may themselves be TBD or
regular files.) Similarly, the re-exports of a regular dylib can refer
to a TBD file.
Differential Revision: https://reviews.llvm.org/D85404
Two things needed fixing for that to work:
1. getName() no longer returns null for DylibFiles constructed from TAPIs
2. markSubLibrary() now accepts .tbd as a possible extension
Differential Revision: https://reviews.llvm.org/D86180
Currently, when a program header type is unknown, we dont print anything:
```
ProgramHeader {
Type: (0x60000000)
```
With this patch the output will be:
```
ProgramHeader {
Type: Unknown (0x60000000)
```
It was discussed in D85526 and consistent with what we print for
'--sections' already, e.g.:
```
Section {
Name: .sec
Type: Unknown (0x7FFFFFFF)
}
```
Differential revision: https://reviews.llvm.org/D86213
The function `__tls_get_addr` is used to get the address of an object that is Thread Local Storage.
It needs to have two relocations on it.
One relocation is for the function call itself and it is either R_PPC64_REL24 or R_PPC64_REL24_NOTOC.
The other is R_PPC64_TLSGD or R_PPC64_TLSLD for the symbol that is having its address computed.
In the early days of the transition from the ELFv1 ABI that is used for big endian PowerPC Linux distributions to the ELFv2 ABI that is used for little endian PowerPC Linux distributions, there was some ambiguity in the specification of the relocations for TLS. The GNU linker has implemented support for correct handling of calls to __tls_get_addr with a missing relocation. Unfortunately, we didn't notice that the IBM XL compiler did not handle TLS according to the updated ABI until we tried linking XL compiled libraries with LLD. As a result, there is a lot of code out there in various libraries compiled with XL that have this problem.
This patch adds a new error check in LLD that makes sure calls to `__tls_get_addr` are not missing the TLSGD/TLSLD relocation.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D85994
PR46970: for `alias = aliasee`, the alias can be used in relocation processing
and on ARM st_type does affect Thumb interworking. It is thus desirable for the
alias to get the same st_type.
Note that the st_size field should not be inherited because some tools use
st_size=0 as a heuristic to detect aliases. Retaining st_size can thwart such
heuristics and cause aliases to be preferred over the original symbols.
Differential Revision: https://reviews.llvm.org/D86263
* GNU ld places non-SHF_ALLOC sections after SHF_ALLOC sections. This has the
advantage that the file offsets of a non-SHF_ALLOC cannot be contained in
a PT_LOAD. This patch matches the behavior.
* For non-SHF_ALLOC non-orphan sections, GNU ld may assign non-zero sh_addr and
treat them similar to SHT_NOBITS (not advance location counter). This
is an alternative approach to what we have done in D85100.
By placing non-SHF_ALLOC sections at the end, we can drop special
cases in createSection and findOrphanPos added by D85100.
Different from GNU ld, we set sh_addr to 0 for non-SHF_ALLOC sections. 0
arguably is better because non-SHF_ALLOC sections don't appear in the memory
image.
ELF spec says:
> sh_addr - If the section will appear in the memory image of a process, this
> member gives the address at which the section's first byte should
> reside. Otherwise, the member contains 0.
D85100 appeared to take a detour. If we take a combined view on D85100 and this
patch, the overall complexity slightly increases (one more 3-line loop) and
compatibility with GNU ld improves.
The behavior we don't want to match is the special treatment of .symtab
.shstrtab .strtab: they can be matched in LLD but not in GNU ld.
Reviewed By: jhenderson, psmith
Differential Revision: https://reviews.llvm.org/D85867
LLD currently does not allow non-contiguous SHF_LINK_ORDER components in an
output section. This makes it infeasible to add SHF_LINK_ORDER to an existing
metadata section if backward compatibility with older object files are
concerned.
We did not allow mixed components (like GNU ld) and D77007 relaxed to allow
non-contiguous SHF_LINK_ORDER components. This patch allows arbitrary mix, with
sorting performed within an InputSectionDescription. For example,
`.rodata : {*(.rodata.foo) *(.rodata.bar)}`, has two InputSectionDescription's.
If there is at least one SHF_LINK_ORDER and at least one non-SHF_LINK_ORDER in
.rodata.foo, they are ordered within `*(.rodata.foo)`: we arbitrarily place
SHF_LINK_ORDER components before non-SHF_LINK_ORDER components (like Solaris ld).
`*(.rodata.bar)` is ordered similarly, but the two InputSectionDescription's
don't interact. It can be argued that this is more reasonable than the previous
behavior where written order was not respected.
It would be nice if the two different semantics (ordering requirement & garbage
collection) were not overloaded on one section flag, however, it is probably
difficult to obtain a generic flag at this point
(https://groups.google.com/forum/#!topic/generic-abi/hgx_m1aXqUo
"SHF_LINK_ORDER's original semantics make upgrade difficult").
(Actually, without the GC semantics, SHF_LINK_ORDER would still have the
sh_link!=0 & sh_link=0 issue. It is just that people find the GC semantics more
useful and tend to use the feature more often.)
GNU ld feature request: https://sourceware.org/bugzilla/show_bug.cgi?id=16833
Differential Revision: https://reviews.llvm.org/D84001
This patch implements the handling for the R_PPC64_PCREL_OPT relocation as well
as the GOT relocation for the associated R_PPC64_GOT_PCREL34 relocation.
On Power10 targets with PC-Relative addressing, the linker can relax
GOT-relative accesses to PC-Relative under some conditions. Since the sequence
consists of a prefixed load, followed by a non-prefixed access (load or store),
the linker needs to replace the first instruction (as the replacement
instruction will be prefixed). The compiler communicates to the linker that
this optimization is safe by placing the two aforementioned relocations on the
GOT load (of the address).
The linker then does two things:
- Convert the load from the got into a PC-Relative add to compute the address
relative to the PC
- Find the instruction referred to by the second relocation (R_PPC64_PCREL_OPT)
and replace the first with the PC-Relative version of it
It is important to synchronize the mapping from legacy memory instructions to
their PC-Relative form. Hence, this patch adds a file to be included by both
the compiler and the linker so they're always in agreement.
Differential revision: https://reviews.llvm.org/D84360
Thunk alignment is added in thie patch when using pc-rel instructions
to avoid crossing the 64 byte boundary.
Patched by: nemanjai, NeHuang
Reviewed By: sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D85973
This makes the test introduced in 537f5483fe more robust with respect
to the actual version number. The previous regex restricted the version
to start with a leading `1` which was overly restrictive.
-gdwarf-5 -fdebug-types-section may produce multiple .debug_info sections. All
except one are type units (.debug_types before DWARF v5). When constructing
.gdb_index, we should ignore these type units. We use a simple heuristic: the
compile unit does not have the SHF_GROUP flag. (This needs to be revisited if
people place compile unit .debug_info in COMDAT groups.)
This issue manifests as a data race: because an object file may have multiple
.debug_info sections, we may concurrently construct `LLDDwarfObj` for the same
file in multiple threads. The threads may access `InputSectionBase::data()`
concurrently on the same input section. `InputSectionBase::data()` does a lazy
uncompress() and rewrites the member variable `rawData`. A thread running zlib
`inflate()` (transitively called by uncompress()) on a buffer with `rawData`
tampered by another thread may fail with `uncompress failed: zlib error: Z_DATA_ERROR`.
Even if no data race occurred in an optimistic run, if there are N .debug_info,
one CU entry and its address ranges will be replicated N times. The result
.gdb_index can be much larger than a correct one.
The new test gdb-index-dwarf5-type-unit.s actually has two compile units. This
cannot be produced with regular approaches (it can be produced with -r
--unique). This is used to demonstrate that the .gdb_index construction code
only considers the last non-SHF_GROUP .debug_info
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85579
* For .cfi_*, GCC/GNU as emits SHT_PROGBITS type .eh_frame sections.
* Since rL252300, clang emits SHT_X86_64_UNWIND type .eh_frame sections
(originated from Solaris, documented in the x86-64 psABI).
* Some assembly use `.section .eh_frame,"a",@unwind` to generate
SHT_X86_64_UNWIND .eh_frame sections.
In a non-relocatable link, input .eh_frame are combined and there is
only one SyntheticSection .eh_frame in the output section, so the
"section type mismatch" diagnostic does not fire.
In a relocatable link, there is no SyntheticSection .eh_frame. .eh_frame of
mixed types can trigger the diagnostic. This patch fixes it by adding another
special case 0x70000001 (= SHT_X86_64_UNWIND) to canMergeToProgbits().
ld.lld -r gcc.o clang.o => error: section type mismatch for .eh_frame
There was a discussion "RFC: Usefulness of SHT_X86_64_UNWIND" on the x86-64-abi
mailing list. Folks are not wild about making the psABI value 0x70000001 into
gABI, but a few think defining 0x70000001 for .eh_frame may be a good idea for a
new architecture.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85785
Pretty straightforward; just emits LC_RPATH for dyld to consume.
Note that lld itself does not yet support dylib lookup via @rpath.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D85701
It's similar to lld-ELF's `-whole-archive`, but applied to individual
archives instead of to a series of them.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D85550
Previously, lld would crash while complaining that `Expected<T>
must be checked before access or destruction`.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D85403
References to symbols in dylibs work very similarly regardless of
whether the symbol is a TLV. The main difference is that we have a
separate `__thread_ptrs` section that acts as the GOT for these
thread-locals.
We can identify thread-locals in dylibs by a flag in their export trie
entries, and we cross-check it with the relocations that refer to them
to ensure that we are not using a GOT relocation to reference a
thread-local (or vice versa).
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D85081
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
For an InputSection, the `buf` argument of `InputSectionBase::relocate` points
to the content of the containing OutputSection, instead of the content of the
InputSection itself, so `outSecOff` needs to be added in its callees. This is
counter-intuitive and leads to many `- outSecOff` and `+ outSecOff`.
This patch makes `InputSection::writeTo` call `InputSectionBase::relocate` with
`outSecOff` added. relocAlloc/relocNonAlloc/relocateNonAllocForRelocatable can
thus be simplified now.
Updated test:
* non-abs-reloc.s: A minor offset bug is fixed for a diagnostic in `relocateNonAlloc`
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85618
It turns that gnu-ifunc-plt-i386.s and gnu-ifunc-plt.s tests are broken.
Initially they were implemented in D27581 and tested that `IRELATIVE` relocations
are placed after other relocations in `.rel.plt`.
Later, we started to place `IRELATIVE` relocations to `.rela.dyn` (D65651).
Also, at some point `.plt` was renamed to `.iplt` (D71520).
Now, `gnu-ifunc*` tests mentioned do not test what they intended to test initially:
they should test that `IRELATIVE` relocations are placed after other ones in
`.rela.dyn`. Also, comments needs to be updated accordingly after changes performed.
This patch updates them.
Differential revision: https://reviews.llvm.org/D85642
This improves the handling of `-platform_version` by addressing the FIXME in the code to process the arguments.
Reviewed By: int3, #lld-macho
Differential Revision: https://reviews.llvm.org/D81413
Handle command-line option `-sectcreate SEG SECT FILE`, which inputs a binary blob from `FILE` into `SEG,SECT`
Reviewed By: int3
Differential Revision: https://reviews.llvm.org/D85501
This patch adds the missing information to the LF_BUILDINFO record, which allows for rebuilding a .CPP without any external dependency but the .OBJ itself (other than the compiler).
Some external tools that we are using (Recode, Live++) are extracting the information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO stores a full path to the compiler, the PWD (CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variables). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
Currently both sections will be placed in the same PT_LOAD and therefore
lld generates a contiguous output file containing both sections.
By using AT(0xffff0000) the .vectors is placed a separate PT_LOAD and the
resulting file is now only a few kilobytes.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D85661
When a weak reference of a lazy symbol occurs we were not correctly
updating the lazy symbol. We need to tag the existing lazy symbol
as weak and, in the case of a function symbol, give it a signature.
Without the signature we can't then create the dummy function which
is needed when an weakly undefined function is called.
We had tests for weakly referenced lazy symbols but we were only
tests in the case where the reference was seen before the lazy
symbol.
See: https://github.com/WebAssembly/wasi-libc/pull/214
Differential Revision: https://reviews.llvm.org/D85567
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
glibc/sysdeps/unix/sysv/linux/x86_64/sigaction.c libc.a(sigaction.o) has a CIE
with the augmentation string "zRS". Support 'S' to allow --icf={safe,all}.
Required for e.g. linking iOS apps since they don't have a platform-native
SDK
Reviewed By: #lld-macho, compnerd, smeenai
Differential Revision: https://reviews.llvm.org/D85153
Note: What ELF refers to as "TLS", Mach-O seems to refer to as "TLV", i.e.
thread-local variables.
This diff implements support for TLV relocations that reference defined
symbols. On x86_64, TLV relocations are always used with movq opcodes, so for
defined TLVs, we don't need to create a synthetic section to store the
addresses of the symbols -- we can just convert the `movq` to a `leaq`.
One notable quirk of Mach-O's TLVs is that absolute-address relocations
inside TLV-defining sections behave differently -- their addresses are
no longer absolute, but relative to the start of the target section.
(AFAICT, RIP-relative relocations are not allowed in these sections.)
Reviewed By: #lld-macho, compnerd, smeenai
Differential Revision: https://reviews.llvm.org/D85080
This diff makes the behavior in {D80859} and {D81888} apply to
thread-local ZeroFill sections too. I realized this was necessary whie
trying to implement thread-local variables.
Reviewed By: #lld-macho, compnerd, MaskRay
Differential Revision: https://reviews.llvm.org/D85079
Compatibility checks for PPC64PltCallStub and PPC64PCRelPLTStub are
added in this patch to prevent the usage of incompatible thunk/stub.
Reviewed By: sfertile, nemanjai, stefanp
Differential Revision: https://reviews.llvm.org/D85459
tl;dr See D81784 for the 'tombstone value' concept. This patch changes our behavior to be almost the same as GNU ld (except that we also use 1 for .debug_loc):
* .debug_ranges & .debug_loc: 1 (LLD<11: 0+addend; GNU ld uses 1 for .debug_ranges)
* .debug_*: 0 (LLD<11: 0+addend; GNU ld uses 0; future LLD: -1)
We make the tweaks because:
1) The new tombstone is novel and needs more time to be adopted by consumers before it's the default.
2) The old (gold) strategy had problems with zero-length functions - so rather than going back that, we're going to the GNU ld strategy which doesn't have that problem.
3) One slight tweak to (2) is to apply the .debug_ranges workaround to .debug_loc for the same reasons it applies to debug_ranges - to avoid terminating lists early.
-----
http://lists.llvm.org/pipermail/llvm-dev/2020-July/143482.html
The tombstone value -1 in .debug_line caused problems to lldb (fixed by D83957;
will be included in 11.0.0) and breakpad (fixed by
https://crrev.com/c/2321300). It may potentially affects other DWARF consumers.
For .debug_ranges & .debug_loc: 1, an argument preferring 1 (GNU ld for .debug_ranges) over -2 is that:
```
{-1, -2} <<< base address selection entry
{0, length} <<< address range
```
may create a situation where low_pc is greater than high_pc. So we use
1, the GNU ld behavior for .debug_ranges
For other .debug_* sections, there haven't been many reports. One issue is that
bloaty (src/dwarf.cc) can incorrectly count address ranges in .debug_ranges . To
reduce similar disruption, this patch changes the tombstone values to be similar to GNU ld.
This does mean another behavior change to the default trunk behavior. Sorry
about it. The default trunk behavior will be similar to release/11.x while we work on a transition plan for LLD users.
Reviewed By: dblaikie, echristo
Differential Revision: https://reviews.llvm.org/D84825
GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD
(PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to
SHF_ALLOC NOBITS sections. The location counter is not advanced).
This patch tries to fix PR37607 (remove a special case in
`Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot
reset dot to 0 for a middle non-SHF_ALLOC output section. This results in
removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC
non-orphan sections can have non-zero addresses like in GNU ld.
The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan
only. This results in a special case in createSection and findOrphanPos, respectively.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85100
Part of https://bugs.llvm.org/show_bug.cgi?id=41734
The semantics of SHF_LINK_ORDER have been extended to represent metadata
sections associated with some other sections (usually text).
The associated text section may be discarded (e.g. LTO) and we want the
metadata section to have sh_link=0 (D72899, D76802).
Normally the metadata section is only referenced by the associated text
section. sh_link=0 means the associated text section is discarded, and
the metadata section will be garbage collected. If there is another
section (.gc_root) referencing the metadata section, the metadata
section will be retained. It's the .gc_root consumer's job to validate
the metadata sections.
# This creates a SHF_LINK_ORDER .meta with sh_link=0
.section .meta,"awo",@progbits,0
1:
.section .meta,"awo",@progbits,foo
2:
.section .gc_root,"a",@progbits
.quad 1b
.quad 2b
Reviewed By: pcc, jhenderson
Differential Revision: https://reviews.llvm.org/D72904
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD
(PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to
SHF_ALLOC NOBITS sections. The location counter is not advanced).
This patch tries to fix PR37607 (remove a special case in
`Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot
reset dot to 0 for a middle non-SHF_ALLOC output section. This results in
removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC
non-orphan sections can have non-zero addresses like in GNU ld.
The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan
only. This results in a special case in createSection and findOrphanPos, respectively.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85100
Fix PR36272 and PR46835
A .eh_frame FDE references a text section and (optionally) a LSDA (in
.gcc_except_table). Even if two text sections have identical content and
relocations (e.g. a() and b()), we cannot fold them if their LSDA are different.
```
void foo();
void a() {
try { foo(); } catch (int) { }
}
void b() {
try { foo(); } catch (float) { }
}
```
Scan .eh_frame pieces with LSDA and disallow referenced text sections to be
folded. If two .gcc_except_table have identical semantics (usually identical
content with PC-relative encoding), we will lose folding opportunity.
For ClickHouse (an exception-heavy application), this can reduce --icf=all efficiency
from 9% to 5%. There may be some percentage we can reclaim without affecting
correctness, if we analyze .eh_frame and .gcc_except_table sections.
gold 2.24 implemented a more complex fix (resolution to
https://sourceware.org/bugzilla/show_bug.cgi?id=21066) which combines the
checksum of .eh_frame CIE/FDE pieces.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D84610
--oformat=binary is rare (used in a few places in FreeBSD, see `stand/i386/mbr/Makefile` `LDFLAGS_BIN`)
The result should be identical to a normal output transformed by `objcopy -O binary`.
The current implementation ignores addresses and lays out sections by
respecting output section alignments. It can fail when an output section
address is specified, e.g. `.rodata ALIGN(16) :` (PR33651).
Fix PR33651 by respecting LMA. The code is similar to
`tools/llvm-objcop/ELF/Object.cpp` BinaryWriter::finalize after D71035 and D79229.
Unforunately for an output section without PT_LOAD, we assume its LMA is equal
to its VMA. So the result is still incorrect when an output section LMA
(`AT(...)`) is specified
Also drop `alignTo(off, config->wordsize)`. GNU ld does not round up the file size.
Differential Revision: https://reviews.llvm.org/D85086
This adds support for the `-syslibroot` option. This is required to
make the library search order actually function. With this, it is now
possible to link a test Darwin x86_64 program with lld on Darwin.
Differential Revision: https://reviews.llvm.org/D82252
Reviewed By: Jez Ng
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
Clang and GCC have a feature (-MD flag) to create a dependency file
in a format that build systems such as Make or Ninja can read, which
specifies all the additional inputs such .h files.
This change introduces the same functionality to lld bringing it to
feature parity with ld and gold which gained this feature recently.
See https://sourceware.org/bugzilla/show_bug.cgi?id=22843 for more
details and discussion.
The implementation corresponds to -MD -MP compiler flag where the
generated dependency file also includes phony targets which works
around the errors where the dependency is removed. This matches the
format used by ld and gold.
Fixes PR42806
Differential Revision: https://reviews.llvm.org/D82437
D68049 created options for basic block sections: -fbasic-block-sections=,
-funique-basic-block-section-names. Rename options in llc and lld (--lto-)
to be consistent. Specifically,
+ Rename basicblock-sections to basic-block-sections
+ Rename unique-bb-section-names to unique-basic-block-section-names
Differential Revision: https://reviews.llvm.org/D84462
codesign (or more specifically libstuff) checks that each section in
__LINKEDIT ends where the next one starts -- no gaps are permitted. This
diff achieves it by aligning every section's start and end points to
WordSize.
Remarks: ld64 appears to satisfy the constraint by adding padding bytes
when generating the __LINKEDIT data, e.g. by emitting BIND_OPCODE_DONE
(which is a 0x0 byte) repeatedly. I think the approach this diff takes
is a bit more elegant, but I'm not sure if it's too restrictive. In
particular, it assumes padding always uses the zero byte. But we can
revisit this later.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D84718
Tools like `install_name_tool` and `codesign` may modify the Mach-O
header and increase its size. The linker has to provide padding to make this
possible. This diff does that, plus sets its default value to 32 bytes (which
is what ld64 does).
Unlike ld64, however, we lay out our sections *exactly* `-headerpad` bytes from
the header, whereas ld64 just treats the padding requirement as a lower bound.
ld64 actually starts laying out the non-header sections in the __TEXT segment
from the end of the (page-aligned) segment rather than the front, so its
binaries typically have more than `-headerpad` bytes of actual padding.
We should consider implementing the same alignment behavior.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D84714
The C++ ABI requires dylibs to pass a pointer to __cxa_atexit which does
e.g. cleanup of static global variables. The C++ spec says that the pointer
can point to any address in one of the dylib's segments, but in practice
ld64 seems to set it to point to the header, so that's what's implemented
here.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D83603
Clang and GCC have a feature (-MD flag) to create a dependency file
in a format that build systems such as Make or Ninja can read, which
specifies all the additional inputs such .h files.
This change introduces the same functionality to lld bringing it to
feature parity with ld and gold which gained this feature recently.
See https://sourceware.org/bugzilla/show_bug.cgi?id=22843 for more
details and discussion.
The implementation corresponds to -MD -MP compiler flag where the
generated dependency file also includes phony targets which works
around the errors where the dependency is removed. This matches the
format used by ld and gold.
Fixes PR42806
Differential Revision: https://reviews.llvm.org/D82437
This patch supports the situation where caller does not have a valid TOC and
calls using the R_PPC64_REL24_NOTOC relocation and the callee is not DSO local.
In this case the call cannot be made directly since the callee may or may not
require a valid TOC pointer. As a result this situation require a PC-relative
plt stub to set up r12.
Reviewed By: sfertile, MaskRay, stefanp
Differential Revision: https://reviews.llvm.org/D83669
Previously this flag was just ignored. If set, set the
IMAGE_DLL_CHARACTERISTICS_NO_SEH bit, regardless of the normal safeSEH
machinery.
In mingw configurations, the safeSEH bit might not be set in e.g. object
files built from handwritten assembly, making it impossible to use the
normal safeseh flag. As mingw setups don't generally use SEH on 32 bit
x86 at all, it should be fine to set that flag bit though - hook up
the existing GNU ld flag for controlling that.
Differential Revision: https://reviews.llvm.org/D84701
The previous approach of adding up the file sizes of the
component sections ignored the fact that the sections did not have to be
contiguous in the file. As such, it was underestimating the true size.
I discovered this issue because `codesign` checks whether `__LINKEDIT`
extends to the end of the file. Since we were underestimating segment
sizes, this check failed.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D84574
For a weak symbol func in a comdat, the actual leader symbol ends up
named like .weak.func.default*. Likewise, for stdcall on i386, the symbol
may be named _func@4, while the section suffix only is "func", which the
previous implementation didn't handle.
This fixes unwinding through weak functions when using
-ffunction-sections in mingw environments.
Differential Revision: https://reviews.llvm.org/D84607
This patch adds support for the LOG2CEIL builtin function in linker scripts: https://sourceware.org/binutils/docs/ld/Builtin-Functions.html#index-LOG2CEIL_0028exp_0029
As documented for LD, and to keep compatibility, LOG2CEIL(0) returns 0 (not -inf).
The test vectors are somewhat arbitrary. We check minimum values (0-4); middle values (2^32, and 2^32+1); and the maximum value (2^64-1).
The checks for LOG2CEIL explicitly use full 64-bit values (16 hex digits). This is needed to properly verify that -inf and other interesting results aren't returned. (For some reason, all other tests in operators.test use only 14 digits.)
Differential revision: https://reviews.llvm.org/D84054
Needed for testing Objective-C programs (since e.g. Core
Foundation is a framework)
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D83925
XCode passes in this flag, which we do not yet implement. Skip
over the argument for now so we can at least successfully parse the
linker invocation.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D84485
This diff adds support for weak definitions, though it doesn't handle weak
symbols in dylibs quite correctly -- we need to emit binding opcodes for them
in the weak binding section rather than the lazy binding section.
What *is* covered in this diff:
1. Reading the weak flag from symbol table / export trie, and writing it to the
export trie
2. Refining the symbol table's rules for choosing one symbol definition over
another. Wrote a few dozen test cases to make sure we were matching ld64's
behavior.
We can now link basic C++ programs.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D83532
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
`extract part filename` splits the input file into multiple parts separated by
regex `^(.|//)--- ` and extract the specified part to stdout or the
output file (if specified).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
// RUN: extract lds %s -o %t.lds
// RUN: extract asm %s -o %t.s
// RUN: llvm-mc %t.s -o %t.o
// RUN: ld.lld -T %t.lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: extract case1 %s | llc | FileCheck %s --check-prefix=CASE1
// RUN: extract case2 %s | llc | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
This is sometimes better than having multiple test files.
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83834
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
-r --gc-sections is usually not useful because it just makes intermediate output
smaller. https://bugs.llvm.org/show_bug.cgi?id=46700#c7 mentions a use case:
validating the absence of undefined symbols ealier than in the final link.
After D84129 (SHT_GROUP support in -r links), we can support -r
--gc-sections without extra code. So let's allow it.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D84131
* If two group members are combined, we should leave just one index in the SHT_GROUP content.
* If a group member is discarded (/DISCARD/ or upcoming -r --gc-sections combination),
we should drop its index in the SHT_GROUP content. LLD currently crashes (`getOutputSection()` is null).
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D84129
The PC Relative code now allows for calls that are marked with the relocation
R_PPC64_REL24_NOTOC. This indicates that the caller does not have a valid TOC
pointer in R2 and does not require R2 to be restored after the call.
This patch is added to support local calls to callees that require a TOC
Reviewed By: sfertile, MaskRay, nemanjai, stefanp
Differential Revision: https://reviews.llvm.org/D83504
The "undefined symbol" error message from lld-link displays up to 3 references to that symbol, and the number of extra references not shown.
This patch removes the computation of the strings for those extra references.
It fixes a freeze of lld-link we accidentally encountered when activating asan on a large project, without linking with the asan library.
In that case, __asan_report_load8 was referenced more than 2 million times, causing the computation of that many display strings, of which only 3 were used.
Differential Revision: https://reviews.llvm.org/D83510
The test fails in 32-bit Windows builds for unclear reasons:
ld.lld: error: failed to open
C:\src\llvm_package_1100-rc1\build32_stage0\tools\lld\test\ELF\Output\arm-exidx-range.s.tmp:
The parameter is incorrect.
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
After D69985, symbols for "-init" and "-fini" were unconditionally
marked as used even if they were just lazy symbols seen when scanning
archives. That resulted in exposing them in the symbol table of an
output file, as Undefined, which added unwanted dependencies. The patch
fixes the issue by checking the kind of the symbols before the marking.
Differential Revision: https://reviews.llvm.org/D83549
Previously, lld would crash if the .pdata size was not an even multiple
of the expected .pdata entry size. This makes it error gracefully instead.
(We hit this in Chromium due to an assembler problem: https://crbug.com/1101577)
Differential revision: https://reviews.llvm.org/D83479
It allows handling cases when we have SHT_REL[A] sections before target
sections in objects.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46632
which says: "Normally it is not what compilers would emit. We have to support it,
because some custom tools might want to use this feature, which is not restricted by ELF gABI"
Differential revision: https://reviews.llvm.org/D83469
Implements the missing relocation types for AVR target.
The results have been cross-checked with binutils.
Original patch by LemonBoy. Some changes by me.
Differential Revision: https://reviews.llvm.org/D78741
This patch adds some missing information to the LF_BUILDINFO which allows for rebuilding an .OBJ without any external dependency but the .OBJ itself (other than the compiler executable).
Some tools need this information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO therefore stores a full path to the compiler, the PWD (which is the CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variable). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
The PC Relative code allows for calls that are marked with the relocation
R_PPC64_REL24_NOTOC. This indicates that the caller does not have a valid TOC
pointer in R2 and does not require R2 to be restored after the call.
This patch is added to support local calls to callees tha also do not have a TOC.
Reviewed By: sfertile, MaskRay, stefanp
Differential Revision: https://reviews.llvm.org/D82816
The R_PPC64_REL24 is used in function calls when the caller requires a
valid TOC pointer. If the callee shares the same TOC or does not clobber
the TOC pointer then a direct call can be made. If the callee does not
share the TOC a thunk must be added to save the TOC pointer for the caller.
Up until PC Relative was introduced all local calls on medium and large code
models were assumed to share a TOC. This is no longer the case because
if the caller requires a TOC and the callee is PC Relative then the callee
can clobber the TOC even if it is in the same DSO.
This patch is to add support for a TOC caller calling a PC Relative callee that
clobbers the TOC.
Reviewed By: sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D82950
The patch adds checking for various potential issues in parsing name
lookup tables and reporting them as recoverable errors, similarly as we
do for other tables.
Differential Revision: https://reviews.llvm.org/D83050
The parsing method did not check reading errors and might easily fall
into an infinite loop on an invalid input because of that.
Differential Revision: https://reviews.llvm.org/D83049
... to customize the tombstone value we use for an absolute relocation
referencing a discarded symbol. This can be used as a workaround when
some debug processing tool has trouble with current -1 tombstone value
(https://bugs.chromium.org/p/chromium/issues/detail?id=1102223#c11 )
For example, to get the current built-in rules (not considering the .debug_line special case for ICF):
```
-z dead-reloc-in-nonalloc='.debug_*=0xffffffffffffffff'
-z dead-reloc-in-nonalloc=.debug_loc=0xfffffffffffffffe
-z dead-reloc-in-nonalloc=.debug_ranges=0xfffffffffffffffe
```
To get GNU ld (as of binutils 2.35)'s behavior:
```
-z dead-reloc-in-nonalloc='*=0'
-z dead-reloc-in-nonalloc=.debug_ranges=1
```
This option has other use cases. For example, if we want to check
whether a non-SHF_ALLOC section has dead relocations.
With this patch, we can run a regular LLD and run another with a special
-z dead-reloc-in-nonalloc=, then compare their output.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D83264
In GNU ld, --no-relax can disable x86-64 GOTPCRELX relaxation.
It is not useful, so we don't implement it.
For RISC-V, --no-relax disables linker relaxations which have larger
impact.
Linux kernel specifies --no-relax when CONFIG_DYNAMIC_FTRACE is specified
(since http://git.kernel.org/linus/a1d2a6b4cee858a2f27eebce731fbf1dfd72cb4e ).
LLD has not implemented the relaxations, so this option is a no-op.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D81359
Sam Clegg