That variable was of type DenseMap<StringRef, unsigned>, but the
unsigned numbers needed to be monotonicly increasing numbers because
the implementation that used the variable depended on that fact.
That was an implementation detail and shouldn't have leaked into Config.
This patch simplifies its type to std::vector<StringRef>.
llvm-svn: 290151
--retain-symbols-file=filename
Retain only the symbols listed in the file filename, discarding all others.
filename is simply a flat file, with one symbol name per line. This option
is especially useful in environments (such as VxWorks) where a large global
symbol table is accumulated gradually, to conserve run-time memory.
Note: though documentation says "--retain-symbols-file does not discard
undefined symbols, or symbols needed for relocations.", both bfd and gold
do that, and this patch too, like testcase show.
Differential revision: https://reviews.llvm.org/D27716
llvm-svn: 290122
Use of CachedHashStringRef makes sense only when we reuse hash values.
Sprinkling it to all DenseMap has no benefits and just complicates data types.
Basically we shouldn't use CachedHashStringRef unless there is a strong
reason to to do so.
llvm-svn: 290076
The feature is documented as
-----------------------------
The format of the dynamic list is the same as the version node
without scope and node name. See *note VERSION:: for more
information.
--------------------------------
And indeed qt uses a dynamic list with an 'extern "C++"' in it. With
this patch we support that
The change to gc-sections-shared makes us match bfd. Just because we
kept bar doesn't mean it has to be in the dynamic symbol table.
The changes to invalid-dynamic-list.test and reproduce.s are because
of the new parser.
The changes to version-script.s are the only case where we change
behavior with regards to bfd, but I would like to see a mix of
--version-script and --dynamic-list used in the wild before
complicating the code.
llvm-svn: 289082
Shared libraries should have entry set following the same rules as for
regular binaries. The only difference is that in case the default entry
point (_start or __start) isn't found (unless it was set explicitly), we
shouldn't give a warning as in case of regular binaries.
Differential Revision: https://reviews.llvm.org/D27497
llvm-svn: 288878
-N (-omagic)
Set the text and data sections to be readable and writable.
Also, do not page-align the data segment.
Differential revision: https://reviews.llvm.org/D26888
llvm-svn: 288123
--no-rosegment: Do not put read-only non-executable sections in their own segment
Differential revision: https://reviews.llvm.org/D26889
llvm-svn: 288020
-color-diagnostics=auto is default because that's the same as
Clang's default. When color is enabled, error or warning messages
are colored like this.
error:
<bold>ld.lld</bold> <red>error:</red> foo.o: no such file
warning:
<bold>ld.lld</bold> <magenta>warning:</magenta> foo.o: no such file
Differential Revision: https://reviews.llvm.org/D27117
llvm-svn: 287949
This is in the context of https://llvm.org/bugs/show_bug.cgi?id=31109.
When LLD prints out errors for relocations, it tends to print out
extremely large number of errors (like millions) because it would
print out one error per relocation.
This patch makes LLD bail out if it prints out more than 20 errors.
You can configure the limitation using -error-limit argument.
-error-limit=0 means no limit.
I chose the flag name because Clang has the same feature as -ferror-limit.
"f" doesn't make sense to us, so I omitted it.
Differential Revision: https://reviews.llvm.org/D26981
llvm-svn: 287789
This change separates all versioned locals to be a separate list in config,
that was suggested by Rafael and simplifies the logic a bit.
Differential revision: https://reviews.llvm.org/D26754
llvm-svn: 287132
Previously we did not support anything except "local: *", patch changes that.
Actually GNU rules of proccessing wildcards are more complex than that (http://www.airs.com/blog/archives/300):
There are 2 iteration for wildcards, at first iteration "*" wildcards are ignored and handled at second iteration.
Since we previously decided not to implement such complex rules,
I suggest solution that is implemented in this patch. So for "local: *" case nothing changes,
but if we have wildcarded locals,
they are processed before wildcarded globals.
This should fix several FreeBSD ports, one of them is jpeg-turbo-1.5.1 and
currently blocks about 5k of ports.
Differential revision: https://reviews.llvm.org/D26395
llvm-svn: 286713
Patch allows to pass a symbols file to linker.
LLD will map symbols to sections and sort sections
in output according to symbol ordering file.
That can help to reduce the startup time and/or
amount of pagefaults during startup.
Also, interesting benchmark result was produced by Rafael Espíndola.
After applying the symbols file for clang he timed compiling
X86MCTargetDesc.ii to an object file.
The page faults went from just
56,988 to 56,946 since most faults are not in the binary.
Running time went from 4.403053515 to 4.178112244.
The speedup seems to be because of better cache
locality.
Differential revision: https://reviews.llvm.org/D26130
llvm-svn: 286440
In short the patch introduces support for linking object file conform
MIPS N32 ABI [1]. This ABI is similar to N64 ABI but uses 32-bit
pointer size.
The most non-trivial requirement of this ABI is one more relocation
packing format. N64 ABI puts multiple relocation type into the single
relocation record. The N32 ABI uses series of successive relocations
with the same offset for this purpose. In this patch, new function
`mergeMipsN32RelTypes` handle this case and "convert" N32 relocation to
the N64 relocation so the rest of the code keep unchanged.
For now, linker does not support series of relocations applied to sections
without SHF_ALLOC bit. Probably later I will add the support or insert
some sort of assert into the `relocateNonAlloc` routine to catch this
case.
[1] ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/MIPS-N32-ABI-Handbook.pdf
Differential revision: https://reviews.llvm.org/D26298
llvm-svn: 286052
As the state of lld gets more complicated, shutting down gets more
expensive.
In a normal lld run we can just call _exit immediately after renaming
the temporary output file. We still want the ability to run a full
shutdown since that is useful for detecting memory leaks.
This patch adds a --full-shutdown flag and changes lit to use it.
llvm-svn: 285224
In this patch partial gdb_index section is created.
For costructing the .gdb_index section 6 steps should be performed (details are in
SplitDebugInfo.cpp file header), this patch do first 3:
Creates proper section header.
Fills list of compilation units.
Types CU list area is not supposed to be supported, so it is ignored and therefore
can be treated as implemented either.
Differential revision: https://reviews.llvm.org/D24706
llvm-svn: 284708
Previously, we were checking the existence of an entry symbol
too early. It was done before the linker script processor creates
symbols defined in scripts. Fixes bug 30743.
llvm-svn: 284676
The R_ARM_TARGET2 relocation is used in ARM exception tables to encode
a data dependency that will only be dereferenced by code in the
run-time support library. In a similar way to R_ARM_TARGET1 the
handling of the relocation is target specific, it maps to one of
R_ARM_ABS32, R_ARM_REL32 or R_ARM_GOT_PREL. The choice depends on the
run-time library. R_ARM_GOT_PREL is used for linux and BSD,
R_ARM_ABS32 and R_ARM_REL32 are used for bare-metal.
The command line option --target2=<target> can be used to select the
relocation used for R_ARM_TARGET2. The default is R_ARM_GOT_PREL.
Differential revision: https://reviews.llvm.org/D25684
llvm-svn: 284404
-z wxneeded creates a PHDR PT_OPENBSD_WXNEEDED.
PT_OPENBSD_WXNEEDED
The array element specifies that a process executing this file may need to be able to map or protect memory regions as simultaneously executable and writable. If the system is unable or unwilling to permit that for this executable then it may fail immediately. This segment type is meaningful only for executable files and is ignored in other objects.
http://man.openbsd.org/OpenBSD-current/man5/elf.5
Differential revision: https://reviews.llvm.org/D25472
llvm-svn: 284226
--section-start=sectionname=org
Locate a section in the output file at the absolute address given by org.
You may use this option as many times as necessary to locate multiple sections in the command line.
org must be a single hexadecimal integer; for compatibility with other linkers,
you may omit the leading `0x' usually associated with hexadecimal values.
Note: there should be no white space between sectionname, the equals sign (“<=>”), and org.
-Tbss=org
-Tdata=org
-Ttext=org
Same as --section-start, with .bss, .data or .text as the sectionname.
Differential revision: https://reviews.llvm.org/D24294
llvm-svn: 281458
Implemented by building an ELF file in memory.
elf, default, and binary match gold behavior.
Differential Revision: https://reviews.llvm.org/D24060
llvm-svn: 281108
Fixed code that was not checked before on windows for me, because of testcases that are
disabled on that platform atm.
Inital commit message:
"[ELF] - Versionscript: do not treat non-wildcarded names as wildcards."
Previously we incorrectly handled cases when symbol name in extern c++ tag
was enclosed in quotes. Next case was treated as wildcard:
GLIBCXX_3.4 {
extern "C++" {
"aaa*"
}
But it should have not. Quotes around aaa here means that we should have do exact
name matching.
That is PR30268 which has name with pointer is interpreted as wildcard by lld:
extern "C++" {
"operator delete[](void*)";
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D24229
llvm-svn: 281049
Fixed code that was not checked by testcases that are disabled on windows.
Inital commit message:
"[ELF] - Versionscript: do not treat non-wildcarded names as wildcards."
Previously we incorrectly handled cases when symbol name in extern c++ tag
was enclosed in quotes. Next case was treated as wildcard:
GLIBCXX_3.4 {
extern "C++" {
"aaa*"
}
But it should have not. Quotes around aaa here means that we should have do exact
name matching.
That is PR30268 which has name with pointer is interpreted as wildcard by lld:
extern "C++" {
"operator delete[](void*)";
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D24229
llvm-svn: 281045
Previously we incorrectly handled cases when symbol name in extern c++ tag
was enclosed in quotes. Next case was treated as wildcard:
GLIBCXX_3.4 {
extern "C++" {
"aaa*"
}
But it should have not. Quotes around aaa here means that we should have do exact
name matching.
That is PR30268 which has name with pointer is interpreted as wildcard by lld:
extern "C++" {
"operator delete[](void*)";
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D24229
llvm-svn: 281038
"Error" looks like it is indicating a parse error. "Error" actually
instructs the later process to report an error if there's an error
condition. Thus the new name.
llvm-svn: 280529
FreeBSD's libstdc++ build (used on tier-2 architectures) uses GNU ld's
-f <name> option, which sets the DT_AUXILIARY field to the specified name.
Multiple -f options may be specified and the DT_AUXILIARY entries
will be added in the order in which they appear.
Patch implements that option.
Differential revision: https://reviews.llvm.org/D24139
llvm-svn: 280475
DiscardPolicy is enum replacing several boolean options.
This approach is not only consistent with what we use for
unresolveds (UnresolvedPolicy), but also should help to solve a problem
of options with opposing meanings, mentioned in PR28843
Differential revision: https://reviews.llvm.org/D23868
llvm-svn: 280209
This approach is not only consistent with UnresolvedPolicy,
but also should help to solve a problem
of options with opposing meanings, mentioned in PR28843
Differential revision: https://reviews.llvm.org/D23869
llvm-svn: 280206
-oformat output-format
`-oformat' option can be used to specify the binary format for the output object file.
Patch implements binary format output type.
Differential revision: https://reviews.llvm.org/D23769
llvm-svn: 279726
Rui Ueyama