These were reverted in r167222 along with the rest
of the last different address space pointer size attempt.
These will be used in later commits.
llvm-svn: 187223
On Windows, this improves clean cmake configuration time on my
workstation from 1m58s to 1m32s, which is pretty significant. There's
probably more that can be done here, but this is the low hanging fruit.
Eric volunteered to regenerate ./configure for me.
llvm-svn: 187209
The bitcode representation attribute kinds are encoded into / decoded from
should be independent of the current set of LLVM attributes and their position
in the AttrKind enum. This patch explicitly encodes attributes to fixed bitcode
values.
With this patch applied, LLVM does not silently misread attributes written by
LLVM 3.3. We also enhance the decoding slightly such that an error message is
printed if an unknown AttrKind encoding was dected.
Bonus: Dropping bitcode attributes from AttrKind is now easy, as old AttrKinds
do not need to be kept to support the Bitcode reader.
llvm-svn: 187186
This patch provides basic support for powerpc64le as an LLVM target.
However, use of this target will not actually generate little-endian
code. Instead, use of the target will cause the correct little-endian
built-in defines to be generated, so that code that tests for
__LITTLE_ENDIAN__, for example, will be correctly parsed for
syntax-only testing. Code generation will otherwise be the same as
powerpc64 (big-endian), for now.
The patch leaves open the possibility of creating a little-endian
PowerPC64 back end, but there is no immediate intent to create such a
thing.
The LLVM portions of this patch simply add ppc64le coverage everywhere
that ppc64 coverage currently exists. There is nothing of any import
worth testing until such time as little-endian code generation is
implemented. In the corresponding Clang patch, there is a new test
case variant to ensure that correct built-in defines for little-endian
code are generated.
llvm-svn: 187179
The language reference says that:
"If a symbol appears in the @llvm.used list, then the compiler,
assembler, and linker are required to treat the symbol as if there is
a reference to the symbol that it cannot see"
Since even the linker cannot see the reference, we must assume that
the reference can be using the symbol table. For example, a user can add
__attribute__((used)) to a debug helper function like dump and use it from
a debugger.
llvm-svn: 187103
There's no need to specify a flag to omit frame pointer elimination on non-leaf
nodes...(Honestly, I can't parse that option out.) Use the function attribute
stuff instead.
llvm-svn: 187093
This removes the need to store the asm variant in each row of the single table that existed before. Shaves ~16K off the size of X86AsmParser.o.
llvm-svn: 187026
Similar to ARM change r182800, dynamic linker will read bits/addends from
the original object rather than from the object that might have been patched
previously. For the purpose of relocations for MCJIT stubs on MIPS, we
internally use otherwise unused MIPS relocations.
The change also enables MCJIT unit tests for MIPS (EL/BE), and the following
two tests now pass:
- MCJITTest.return_global and
- MCJITTest.multiple_functions.
These issues have been tracked as Bug 16250.
Patch by Petar Jovanovic.
llvm-svn: 187019
The main observation is that we never need both the filesize and the map size.
When mapping a slice of a file, it doesn't make sense to request a null
terminator and that would be the only case where the filesize would be used.
There are other cleanups that should be done in this area:
* A client should not have to pass the size (even an explicit -1) to say if
it wants a null terminator or not, so we should probably swap the argument
order.
* The default should be to not require a null terminator. Very few clients
require this, but many end up asking for it just because it is the default.
llvm-svn: 186984
MDNodes used by DbgDeclareInst and DbgValueInst.
Another 16 testing cases failed and they are disabled with
-disable-debug-info-verifier.
A total of 34 cases are disabled with -disable-debug-info-verifier and will be
corrected.
llvm-svn: 186902
Use the function attributes to pass along the stack protector buffer size.
Now that we have robust function attributes, don't use a command line option to
specify the stack protecto buffer size.
llvm-svn: 186863
Variadic MC instructions don't note whether the variable operands
are uses or defs, so mayAffectControlFlow() must conservatively
assume they are defs and return true if the PC is in the operand
list.
rdar://14488628
llvm-svn: 186846
Simplify DIxxx:Verify to not call Verify on an operand. Instead, we use
DebugInfoFinder to list all MDNodes that should be a DIScope and all MDNodes
that should be a DIType and we will call Verify on those lists.
llvm-svn: 186737
The original change was rolled back in r186627 because of test
failures on the big endian machine. I believe I fixed the issue
so re-submitting.
llvm-svn: 186734
Summary:
This allows the clang driver to put MSVC compatible options in the same
enumerator space as its normal options but exclude them from normal
option parsing.
Also changes the standard ParseArgs() method to consider unknown
arguments with a leading slash as being inputs rather than flags.
High level discussion for clang-cl is here:
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2013-June/030404.html
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1049
llvm-svn: 186703
Summary:
Dump optional data directory entries in the PE/COFF header, so that
we can test the output of LLD linker. This patch updates the test binary
file, but the source of the binary is the same. I just re-linked the file.
I don't know how the previous file was linked, but the previous file did
not have any data directory entries for some reason.
Reviewers: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1148
llvm-svn: 186623
The plan is to use it for clang and lld.
Major behavior changes:
- We can now parse UTF-16 files that have a byte order mark.
- PR16209: Don't drop backslashes on the floor if they don't escape
anything.
The actual parsing loop was based on code from Clang's driver.cpp,
although it's been rewritten to track its state with control flow rather
than state variables.
Reviewers: hans
Differential Revision: http://llvm-reviews.chandlerc.com/D1170
llvm-svn: 186587
We don't want cast and dyn_cast to work on temporaries. They don't extend
lifetime like a direct bind to a reference would, so they can introduce
hard to find bugs.
I added tests to make sure we don't regress this. Thanks to Eli Friedman for
noticing this and for his suggestions on how to test it.
llvm-svn: 186559
it clear what we want to do. Unfortunately the conversion to
pointer operator fires now instead and chasing down all of the
conversions and making them explicit and handled is a large task
so add a FIXME with it.
llvm-svn: 186543
This is to support parsing UTF16 response files in LLVM/lib/Option for
lld and clang.
Reviewers: hans
Differential Revision: http://llvm-reviews.chandlerc.com/D1138
llvm-svn: 186426
llvm-ar is the only user of toWin32Time() (via setLastModificationAndAccessTime), and r186298 can be reverted.
It had been buggy since the initial commit.
FIXME: Could we rename {from|to}Win32Time as {from|to}Win32FILETIME in TimeValue?
llvm-svn: 186374
No functionality change.
This is preparing to move response file parsing into lib/Option so it
can be shared between clang and lld. This change isn't just a
micro-optimization. Clang's driver uses a std::set<std::string> to
unique arguments while parsing response files, so this matches that.
llvm-svn: 186319
This fixes two bugs is lib/Object that the use in llvm-ar found:
* In OS X created archives, the name can be padded with nulls. Strip them.
* In the constructor, remember the first non special member and use that in
begin_children. This makes sure we skip all special members, not just the
first one.
The change to llvm-ar itself consist of
* Using lib/Object for reading archives instead of ArchiveReader.cpp.
* Writing the modified archive directly, instead of creating an in memory
representation.
The old Archive library was way more general than what is needed, as can
be seen by the diffstat of this patch.
Having llvm-ar using lib/Object now opens the way for creating regular symbol
tables for both native objects and bitcode files so that we can use those
archives for LTO.
llvm-svn: 186197
Address calculation for gather/scather in vectorized code can incur a
significant cost making vectorization unbeneficial. Add infrastructure to add
cost.
Tests and cost model for targets will be in follow-up commits.
radar://14351991
llvm-svn: 186187
This is a generic block implementation that works on more than machine blocks.
The C++ mode addition is a bonus due to the extra space provided.
llvm-svn: 186175
Summary:
This patch adds explicit calling convention types for the Win64 and
System V/x86-64 ABIs. This allows code to override the default, and use
the Win64 convention on a target that wants to use SysV (and
vice-versa). This is needed to implement the `ms_abi` and `sysv_abi` GNU
attributes.
Reviewers:
CC:
llvm-svn: 186144
The status function is already using a syscall that returns the file size.
Remember it and implement file_size as a simple wrapper.
No functionally change, but clients that already use status now can avoid
calling file_size.
llvm-svn: 186016
A special case list can now specify categories for specific globals,
which can be used to instruct an instrumentation pass to treat certain
functions or global variables in a specific way, such as by omitting
certain aspects of instrumentation while keeping others, or informing
the instrumentation pass that a specific uninstrumentable function
has certain semantics, thus allowing the pass to instrument callers
according to those semantics.
For example, AddressSanitizer now uses the "init" category instead of
global-init prefixes for globals whose initializers should not be
instrumented, but which in all other respects should be instrumented.
The motivating use case is DataFlowSanitizer, which will have a
number of different categories for uninstrumentable functions, such
as "functional" which specifies that a function has pure functional
semantics, or "discard" which indicates that a function's return
value should not be labelled.
Differential Revision: http://llvm-reviews.chandlerc.com/D1092
llvm-svn: 185978
Change the informal convention of DBG_VALUE machine instructions so that
we can express a register-indirect address with an offset of 0.
The old convention was that a DBG_VALUE is a register-indirect value if
the offset (operand 1) is nonzero. The new convention is that a DBG_VALUE
is register-indirect if the first operand is a register and the second
operand is an immediate. For plain register values the combination reg,
reg is used. MachineInstrBuilder::BuildMI knows how to build the new
DBG_VALUES.
rdar://problem/13658587
llvm-svn: 185966
in-tree implementations of TargetLoweringBase::isFMAFasterThanMulAndAdd in
order to resolve the following issues with fmuladd (i.e. optional FMA)
intrinsics:
1. On X86(-64) targets, ISD::FMA nodes are formed when lowering fmuladd
intrinsics even if the subtarget does not support FMA instructions, leading
to laughably bad code generation in some situations.
2. On AArch64 targets, ISD::FMA nodes are formed for operations on fp128,
resulting in a call to a software fp128 FMA implementation.
3. On PowerPC targets, FMAs are not generated from fmuladd intrinsics on types
like v2f32, v8f32, v4f64, etc., even though they promote, split, scalarize,
etc. to types that support hardware FMAs.
The function has also been slightly renamed for consistency and to force a
merge/build conflict for any out-of-tree target implementing it. To resolve,
see comments and fixed in-tree examples.
llvm-svn: 185956
In the commit message to r185476 I wrote:
>The PowerPC-specific modifiers VK_PPC_TLSGD and VK_PPC_TLSLD
>correspond exactly to the generic modifiers VK_TLSGD and VK_TLSLD.
>This causes some confusion with the asm parser, since VK_PPC_TLSGD
>is output as @tlsgd, which is then read back in as VK_TLSGD.
>
>To avoid this confusion, this patch removes the PowerPC-specific
>modifiers and uses the generic modifiers throughout. (The only
>drawback is that the generic modifiers are printed in upper case
>while the usual convention on PowerPC is to use lower-case modifiers.
>But this is just a cosmetic issue.)
This was unfortunately incorrect, there is is fact another,
serious drawback to using the default VK_TLSLD/VK_TLSGD
variant kinds: using these causes ELFObjectWriter::RelocNeedsGOT
to return true, which in turn causes the ELFObjectWriter to emit
an undefined reference to _GLOBAL_OFFSET_TABLE_.
This is a problem on powerpc64, because it uses the TOC instead
of the GOT, and the linker does not provide _GLOBAL_OFFSET_TABLE_,
so the symbol remains undefined. This means shared libraries
using TLS built with the integrated assembler are currently
broken.
While the whole RelocNeedsGOT / _GLOBAL_OFFSET_TABLE_ situation
probably ought to be properly fixed at some point, for now I'm
simply reverting the r185476 commit. Now this in turn exposes
the breakage of handling @tlsgd/@tlsld in the asm parser that
this check-in was originally intended to fix.
To avoid this regression, I'm also adding a different fix for
this problem: while common code now parses @tlsgd as VK_TLSGD,
a special hack in the asm parser translates this code to the
platform-specific VK_PPC_TLSGD that the back-end now expects.
While this is not really pretty, it's self-contained and
shouldn't hurt anything else for now. One the underlying
problem is fixed, this hack can be reverted again.
llvm-svn: 185945
Remove the implementation in include/llvm/Support/YAMLTraits.h.
Added a DenseMap type DITypeHashMap in DebugInfo.h:
DenseMap<std::pair<StringRef, unsigned>, MDNode*>
llvm-svn: 185852
This reverts r185841 and relands r185831 without using
__has_attribute(const).
Clang prior to r161767 (between 3.1 and 3.2) does not accept
__has_attribute(const) due to rdar://10253857. __const and __const__
are both keyword aliases of const, so they don't work either.
I was able to repro the buildbot failure using clang 3.1 and this patch
fixes it. Various important versions of XCode use clang 2.9-ish, so
this workaround is necessary.
llvm-svn: 185850
The symptom is seg-fault, and the root cause is that a SCEV contains a SCEVUnknown
which has null-pointer to a llvm::Value.
This is how the problem take place:
===================================
1). In the pristine input IR, there are two relevant instrutions Op1 and Op2,
Op1's corresponding SCEV (denoted as SCEV(op1)) is a SCEVUnknown, and
SCEV(Op2) contains SCEV(Op1). None of these instructions are dead.
Op1 : V1 = ...
...
Op2 : V2 = ... // directly or indirectly (data-flow) depends on Op1
2) Optimizer (LSR in my case) generates an instruction holding the equivalent
value of Op1, making Op1 dead.
Op1': V1' = ...
Op1: V1 = ... ; now dead)
Op2 : V2 = ... //Now deps on Op1', but the SCEV(Op2) still contains SCEV(Op1)
3) Op1 is deleted, and call-back function is called to reset
SCEV(Op1) to indicate it is invalid. However, SCEV(Op2) is not
invalidated as well.
4) Following pass get the cached, invalid SCEV(Op2), and try to manipulate it,
and cause segfault.
The fix:
========
It seems there is no clean yet inexpensive fix. I write to dev-list
soliciting good solution, unforunately no ack. So, I decide to fix this
problem in a brute-force way:
When ScalarEvolution::getSCEV is called, check if the cached SCEV
contains a invalid SCEVUnknow, if yes, remove the cached SCEV, and
re-evaluate the SCEV from scratch.
I compile buch of big *.c and *.cpp, fortunately, I don't see any increase
in compile time.
Misc:
=====
The reduced test-case has 2357 lines of code+other-stuff, too big to commit.
rdar://14283433
llvm-svn: 185843
I tested r185831 by self-hosting clang with a recent clang, and got no
warnings. I haven't been able to reproduce the problem locally.
llvm-svn: 185833
When targetting Windows, clang does not define __GNUC__, and as a result
we don't use our attributes with it. This leads to warnings about
unused functions that are already annotated with LLVM_ATTRIBUTE_UNUSED.
Rather than testing for __clang__, we can use its __has_attribute and
__has_builtin macros directlty.
While I'm here, conditionally define and use __GNUC_PREREQ for gcc
version checks. Spelling the check out with three comparisons is
verbose and error prone.
Reviewers: aaron.ballman
Differential Revision: http://llvm-reviews.chandlerc.com/D1080
llvm-svn: 185831
This function is complementary to createTemporaryFile. It handles the case were
the unique file is *not* temporary: we will rename it in the end. Since we
will rename it, the file has to be in the same filesystem as the final
destination and we don't prepend the system temporary directory.
This has a small semantic difference from unique_file: the default mode is 0666.
This matches the behavior of most unix tools. For example, with this change
lld now produces files with the same permissions as ld. I will add a test
of this change when I port clang over to createUniqueFile (next commit).
llvm-svn: 185726
This function is inspired by clang's Driver::GetTemporaryPath. It hides the
pattern used for uniquing and requires simple file names that are always
placed in the system temporary directory.
llvm-svn: 185716
The stack coloring pass has code to delete stores and loads that become
trivially dead after coloring. Extend it to cope with single instructions
that copy from one frame index to another.
The testcase happens to show an example of this kicking in at the moment.
It did occur in Real Code too though.
llvm-svn: 185705
SystemZ wants normal register scavenging slots, as close to the stack or
frame pointer as possible. The only reason it was using custom code was
because PrologEpilogInserter assumed an x86-like layout, where the frame
pointer is at the opposite end of the frame from the stack pointer.
This meant that when frame pointer elimination was disabled,
the slots ended up being as close as possible to the incoming
stack pointer, which is the opposite of what we want on SystemZ.
This patch adds a new knob to say which layout is used and converts
SystemZ to use target-independent scavenging slots. It's one of the pieces
needed to support frame-to-frame MVCs, where two slots might be required.
The ABI requires us to allocate 160 bytes for calls, so one approach
would be to use that area as temporary spill space instead. It would need
some surgery to make sure that the slot isn't live across a call though.
I stuck to the "isFPCloseToIncomingSP - ..." style comment on the
"do what the surrounding code does" principle. The FP case is already
covered by several Systemz/frame-* tests, which fail without the
PrologueEpilogueInserter change, so no new ones are needed.
No behavioural change intended.
llvm-svn: 185696
Stop using the ISD::EXCEPTIONADDR and ISD::EHSELECTION when lowering
landing pad arguments. These nodes were previously legalized into
CopyFromReg nodes, but that never worked properly because the
CopyFromReg node weren't guaranteed to be scheduled at the top of the
basic block.
This meant the exception pointer and selector registers could be
clobbered before being copied to a virtual register.
This patch copies the two physical registers to virtual registers at
the beginning of the basic block, and lowers the landingpad instruction
directly to two CopyFromReg nodes reading the *virtual* registers. This
is safe because virtual registers don't get clobbered.
A future patch will remove the ISD::EXCEPTIONADDR and ISD::EHSELECTION
nodes.
llvm-svn: 185617
Stop using the ISD::EXCEPTIONADDR and ISD::EHSELECTION when lowering
landing pad arguments. These nodes were previously legalized into
CopyFromReg nodes, but that never worked properly because the
CopyFromReg node weren't guaranteed to be scheduled at the top of the
basic block.
This meant the exception pointer and selector registers could be
clobbered before being copied to a virtual register.
This patch copies the two physical registers to virtual registers at
the beginning of the basic block, and lowers the landingpad instruction
directly to two CopyFromReg nodes reading the *virtual* registers. This
is safe because virtual registers don't get clobbered.
A future patch will remove the ISD::EXCEPTIONADDR and ISD::EHSELECTION
nodes.
llvm-svn: 185595
*NOTE* In a recent version of posix, they added the restrict keyword to the
arguments for this function. From some spelunking it seems that on some
platforms, the call has restrict on its arguments and others it does not. Thus I
left off the restrict keyword from the function prototype in the comment.
llvm-svn: 185501
Correctly handles ref_addr depending on the Dwarf version. Emit Dwarf with
version from module flag.
TODO: turn on/off features depending on the Dwarf version.
llvm-svn: 185484
The PowerPC-specific modifiers VK_PPC_TLSGD and VK_PPC_TLSLD
correspond exactly to the generic modifiers VK_TLSGD and VK_TLSLD.
This causes some confusion with the asm parser, since VK_PPC_TLSGD
is output as @tlsgd, which is then read back in as VK_TLSGD.
To avoid this confusion, this patch removes the PowerPC-specific
modifiers and uses the generic modifiers throughout. (The only
drawback is that the generic modifiers are printed in upper case
while the usual convention on PowerPC is to use lower-case modifiers.
But this is just a cosmetic issue.)
llvm-svn: 185476
This allows getDebugThreadLocalSymbol to return a generic MCExpr
instead of just a MCSymbolRefExpr.
This is in preparation for supporting debug info for TLS variables
on PowerPC, where we need to describe the variable location using
a more complex expression than just MCSymbolRefExpr.
llvm-svn: 185460
This is dead code since PIC16 was removed in 2010. The result was an odd mix,
where some parts would carefully pass it along and others would assert it was
zero (most of the object streamer for example).
llvm-svn: 185436
This adds support for TLS data relocations and modifiers:
.quad target@dtpmod
.quad target@tprel
.quad target@dtprel
Currently exploited by the asm parser only.
llvm-svn: 185394
Patch by Benjamin Kramer!
Use the BlockFrequency class instead of floats in the Hopfield network
computations. This rescales the node Bias field from a [-2;2] float
range to two block frequencies BiasN and BiasP pulling in opposite
directions. This construct has a more predictable behavior when block
frequencies saturate.
The per-node scaling factors are no longer necessary, assuming the block
frequencies around a bundle are consistent.
This patch can cause the register allocator to make different spilling
decisions. The differences should be small.
llvm-svn: 185393
Restrict the current TLS support to X86 ELF for now. Test that we don't
produce it on PPC & we can flesh that test case out with the right thing
once someone implements it.
llvm-svn: 185389
Change assert("text") to assert(0 && "text"). The first case is a const char *
to bool conversion, which always evaluates to true, never triggering the
assert. The second case will always trigger the assert.
llvm-svn: 185227
Based on GCC's output for TLS variables (OP_constNu, x@dtpoff,
OP_lo_user), this implements debug info support for TLS in ELF. Verified
that this output is correct/sufficient on Linux (using gold - if you're
using binutils-ld, you'll need something with the fix for
http://sourceware.org/bugzilla/show_bug.cgi?id=15685 in it).
Support on non-ELF is sort of "arbitrary" at the moment - if Apple folks
want to discuss (or just go ahead & implement) how this should work in
MachO, etc, I'm open.
llvm-svn: 185203
- Build debug metadata for 'bare' Modules using DIBuilder
- DebugIR can be constructed to generate an IR file (to be seen by a debugger)
or not in cases where the user already has an IR file on disk.
llvm-svn: 185193
Allow a BlockFrequency to be divided by a non-zero BranchProbability
with saturating arithmetic. This will be used to compute the frequency
of a loop header given the probability of leaving the loop.
Our long division algorithm already saturates on overflow, so that was a
freebie.
llvm-svn: 185184
a zero-argument createNullPtrType function for creating the canonical
nullptr type.
Differential Revision: http://llvm-reviews.chandlerc.com/D1050
llvm-svn: 185114
This reverts commit r185099.
Looks like both the ppc-64 and mips bots are still failing after I reverted this
change.
Since:
1. The mips bot always performs a clean build,
2. The ppc64-bot failed again after a clean build (I asked the ppc-64
maintainers to clean the bot which they did... Thanks Will!),
I think it is safe to assume that this change was not the cause of the failures
that said builders were seeing. Thus I am recomitting.
llvm-svn: 185111
This reverts commit r185095. This is causing a FileCheck failure on
the 3dnow intrinsics on at least the mips/ppc bots but not on the x86
bots.
Reverting while I figure out what is going on.
llvm-svn: 185099
The category which an APFloat belongs to should be dependent on the
actual value that the APFloat has, not be arbitrarily passed in by the
user. This will prevent inconsistency bugs where the category and the
actual value in APFloat differ.
I also fixed up all of the references to this constructor (which were
only in LLVM).
llvm-svn: 185095
algorithm when assigning EnumValues to the synthesized registers.
The current algorithm, LessRecord, uses the StringRef compare_numeric
function. This function compares strings, while handling embedded numbers.
For example, the R600 backend registers are sorted as follows:
T1
T1_W
T1_X
T1_XYZW
T1_Y
T1_Z
T2
T2_W
T2_X
T2_XYZW
T2_Y
T2_Z
In this example, the 'scaling factor' is dEnum/dN = 6 because T0, T1, T2
have an EnumValue offset of 6 from one another. However, in other parts
of the register bank, the scaling factors are different:
dEnum/dN = 5:
KC0_128_W
KC0_128_X
KC0_128_XYZW
KC0_128_Y
KC0_128_Z
KC0_129_W
KC0_129_X
KC0_129_XYZW
KC0_129_Y
KC0_129_Z
The diff lists do not work correctly because different kinds of registers have
different 'scaling factors'. This new algorithm, LessRecordRegister, tries to
enforce a scaling factor of 1. For example, the registers are now sorted as
follows:
T1
T2
T3
...
T0_W
T1_W
T2_W
...
T0_X
T1_X
T2_X
...
KC0_128_W
KC0_129_W
KC0_130_W
...
For the Mips and R600 I see a 19% and 6% reduction in size, respectively. I
did see a few small regressions, but the differences were on the order of a
few bytes (e.g., AArch64 was 16 bytes). I suspect there will be even
greater wins for targets with larger register files.
Patch reviewed by Jakob.
rdar://14006013
llvm-svn: 185094
There are a few valid situation where we care about the structure inside a
directory, but not about the directory itself. A simple example is for unit
testing directory traversal.
PathV1 had a function like this, add one to V2 and port existing users of the
created temp file and delete it hack to using it.
llvm-svn: 185059
The Builtin attribute is an attribute that can be placed on function call site that signal that even though a function is declared as being a builtin,
rdar://problem/13727199
llvm-svn: 185049
This patch modifies TableGen to generate a function in
${TARGET}GenInstrInfo.inc called getNamedOperandIdx(), which can be used
to look up indices for operands based on their names.
In order to activate this feature for an instruction, you must set the
UseNamedOperandTable bit.
For example, if you have an instruction like:
def ADD : TargetInstr <(outs GPR:$dst), (ins GPR:$src0, GPR:$src1)>;
You can look up the operand indices using the new function, like this:
Target::getNamedOperandIdx(Target::ADD, Target::OpName::dst) => 0
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src0) => 1
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src1) => 2
The operand names are case sensitive, so $dst and $DST are considered
different operands.
This change is useful for R600 which has instructions with a large number
of operands, many of which model single bit instruction configuration
values. These configuration bits are common across most instructions,
but may have a different operand index depending on the instruction type.
It is useful to have a convenient way to look up the operand indices,
so these bits can be generically set on any instruction.
llvm-svn: 184879
Stephen Lin