dsymutil would like to use all the AsmPrinter/MCStreamer infrastructure
to stream out the DWARF. In order to do so, it will reuse the DIE object
and so this header needs to be public.
The interface exposed here has some corners that cannot be used without a
DwarfDebug object, but clients that want to stream Dwarf can just avoid
these.
Differential Revision: http://reviews.llvm.org/D6695
llvm-svn: 225208
In preparation for sinking all the subprogram emission code down from
DwarfDebug into DwarfCompileUnit, this will avoid bloating
DwarfUnit.h/cpp greatly and make concerns a bit more clear/isolated.
(sinking this handling down is part of the work to handle emitting
minimal subprograms for -gmlt-like data into the skeleton CU under
fission)
llvm-svn: 219057
Got bored, removed some manual memory management.
Pushed references (rather than pointers) through a few APIs rather than
replacing *x with x.get().
llvm-svn: 206222
This removes the magic-number-esque code creating/retrieving the same
label for a debug_loc entry from two places and removes the last small
piece of reusable logic from emitDebugLoc so that there will be less
duplication when refactoring it into two functions (one for debug_loc,
the other for debug_loc.dwo).
llvm-svn: 205382
Implement debug_loc.dwo, as well as llvm-dwarfdump support for dumping
this section.
Outlined in the DWARF5 spec and http://gcc.gnu.org/wiki/DebugFission the
debug_loc.dwo section has more variation than the standard debug_loc,
allowing 3 different forms of entry (plus the end of list entry). GCC
seems to, and Clang certainly, only use one form, so I've just
implemented dumping support for that for now.
It wasn't immediately obvious that there was a good refactoring to share
the implementation of dumping support between debug_loc and
debug_loc.dwo, so they're separate for now - ideas welcome or I may come
back to it at some point.
As per a comment in the code, we could choose different forms that may
reduce the number of debug_addr entries we emit, but that will require
further study.
llvm-svn: 204697
This works by moving the existing code into the DIEValue hierarchy
and using the DwarfDebug pointer off of the AsmPrinter to access
any global information we need.
llvm-svn: 203033
This enables us to figure out where in the debug_loc section our
locations are so that we can eventually hash them. It also helps
remove some special case code in emission. No functional change.
llvm-svn: 203018
using a full uint16_t with the flag value... which happens to be
0 or 1. Update the class for bool values and rename functions slightly.
llvm-svn: 202921
This commit moves getSLEB128Size() and getULEB128Size() from
MCAsmInfo to LEB128.h and removes some copy-and-paste code.
Besides, this commit also adds some unit tests for the LEB128
functions.
llvm-svn: 201937
alongside DIEBlock and replace uses accordingly. Use DW_FORM_exprloc
in DWARF4 and later code. Update testcases.
Adding a DIELoc instead of using extra forms inside DIEBlock so
that we can keep location expressions separate from other uses. No
direct use at the moment, however, it's not a lot of code and
using a separately named class keeps it somewhat more obvious
what's going on in various locations.
llvm-svn: 201481
This simplifies type unit and type unit reference creation as well as
setting the stage for inter-type hashing across type unit boundaries.
llvm-svn: 197539
section use the form DW_FORM_data4 whilst in Dwarf 4 and later they
use the form DW_FORM_sec_offset.
This patch updates the places where such attributes are generated to
use the appropriate form depending on the Dwarf version. The DIE entries
affected have the following tags:
DW_AT_stmt_list, DW_AT_ranges, DW_AT_location, DW_AT_GNU_pubnames,
DW_AT_GNU_pubtypes, DW_AT_GNU_addr_base, DW_AT_GNU_ranges_base
It also adds a hidden command line option "--dwarf-version=<uint>"
to llc which allows the version of Dwarf to be generated to override
what is specified in the metadata; this makes it possible to update
existing tests to check the debugging information generated for both
Dwarf 4 (the default) and Dwarf 3 using the same metadata.
Patch (slightly modified) by Keith Walker!
llvm-svn: 195391
Emit DW_TAG_type_units into the debug_info section using compile unit
headers. This is bogus/unusable by debuggers, but testable and provides
more isolated review.
Subsequent patches will include support for type unit headers and
emission into the debug_types section, as well as comdat grouping the
types based on their hash. Also the CompileUnit type will be renamed
'Unit' and relevant portions pulled out into respective CompileUnit and
TypeUnit types.
llvm-svn: 195166
We add a map in DwarfDebug to map MDNodes that are shareable across CUs to the
corresponding DIEs: MDTypeNodeToDieMap. These DIEs can be shared across CUs,
that is why we keep the maps in DwarfDebug instead of CompileUnit.
We make the assumption that if a DIE is not added to an owner yet, we assume
it belongs to the current CU. Since DIEs for the type system are added to
their owners immediately after creation, and other DIEs belong to the current
CU, the assumption should be true.
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
We also add a testing case to show ref_addr relocations for non-darwin
platforms.
llvm-svn: 193779
To support ref_addr, we calculate the section offset of a DIE (i.e. offset
of a DIE from beginning of the debug info section). The Offset field in DIE
is currently CU-relative. To calculate the section offset, we add a
DebugInfoOffset field in CompileUnit to store the offset of a CU from beginning
of the debug info section. We set the value in DwarfUnits::computeSizeAndOffset
for each CompileUnit.
A helper function DIE::getCompileUnit is added to return the CU DIE that
the input DIE belongs to. We also add a map CUDieMap in DwarfDebug to help
finding the CU for a given CU DIE.
For a cross-referenced DIE, we first find the CU DIE it belongs to with
getCompileUnit, then we use CUDieMap to get the corresponding CU for the CU DIE.
Adding the section offset of the CU with the CU-relative offset of a DIE gives
us the seciton offset of the DIE.
We correctly emit ref_addr with relocation using EmitLabelPlusOffset when
doesDwarfUseRelocationsAcrossSections is true.
This commit handles the emission of DW_FORM_ref_addr when we have an attribute
with FORM_ref_addr. A follow-on patch will start using ref_addr when adding a
DIEEntry. This commit will be tested and verified in the follow-on patch.
Reviewed off-list by Eric, Thanks.
llvm-svn: 193658
Also improve the implementation of EmitRawText(Twine) so it doesn't
bother using the SmallString buffer if the Twine is a simple StringRef
anyway.
llvm-svn: 193378
This allows various variables to be more self-documenting and easier to
debug by being of specific types without overlapping enum values.
Precommit review by Eric Christopher.
llvm-svn: 193091
and it is shared across CUs.
We add a few maps in DwarfDebug to map MDNodes for the type system to the
corresponding DIEs: MDTypeNodeToDieMap, MDSPNodeToDieMap, and
MDStaticMemberNodeToDieMap. These DIEs can be shared across CUs, that is why we
keep the maps in DwarfDebug instead of CompileUnit.
Sometimes, when we try to add an attribute to a DIE, the DIE is not yet added
to its owner yet, so we don't know whether we should use ref_addr or ref4.
We create a worklist that will be processed during finalization to add
attributes with the correct form (ref_addr or ref4).
We add addDIEEntry to DwarfDebug to be a wrapper around DIE->addValue. It checks
whether we know the correct form, if not, we update the worklist
(DIEEntryWorklist).
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
llvm-svn: 191792
type units.
Initially this support is used in the computation of an ODR checker
for C++. For now we're attaching it to the DIE, but in the future
it will be attached to the type unit.
This also starts breaking out types into the separation for type
units, but without actually splitting the DIEs.
In preparation for hashing the DIEs this adds a DIEString type
that contains a StringRef with the string contained at the label.
llvm-svn: 187213
Correctly handles ref_addr depending on the Dwarf version. Emit Dwarf with
version from module flag.
TODO: turn on/off features depending on the Dwarf version.
llvm-svn: 185484
This partially reverts r185202 and restores DIELabel to hold plain
MCSymbol references. Instead, we add a new subclass DIEExpr of
DIEValue that can hold generic MCExpr references.
This is in preparation for supporting debug info for TLS variables
on PowerPC, where we need to describe the variable location using
a more complex expression than just MCSymbolRefExpr.
llvm-svn: 185458
There is a difference for FORM_ref_addr between DWARF 2 and DWARF 3+.
Since Eric is against guarding DWARF 2 ref_addr with DarwinGDBCompat, we are
still in discussion on how to handle this.
The correct solution is to update our header to say version 4 instead of version
2 and update tool chains as well.
rdar://problem/13559431
llvm-svn: 178806
the target system.
It was hard-coded to 4 bytes before. I can't get llvm to generate a
ref_addr on a reasonably sized testing case.
rdar://problem/13559431
llvm-svn: 178722
Frederic Riss