Currently, clang emits subprograms for declared functions when the
target debugger or DWARF standard is known to support entry values
(DW_OP_entry_value & the GNU equivalent).
Treat DW_AT_tail_call the same way to allow debuggers to follow cross-TU
tail calls.
Pre-patch debug session with a cross-TU tail call:
```
* frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
frame #1: 0x0000000100000f99 main`main at a.c:8:10 [opt]
```
Post-patch (note that the tail-calling frame, "helper", is visible):
```
* frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
frame #1: 0x0000000100000f80 main`helper [opt] [artificial]
frame #2: 0x0000000100000f99 main`main at a.c:8:10 [opt]
```
This was reverted in 5b9a072c because it attached declaration
subprograms to inlinable builtin calls, which interacted badly with the
MergeICmps pass. The fix is to not attach declarations to builtins.
rdar://46577651
Differential Revision: https://reviews.llvm.org/D69743
It turns out that the debug info describing the Sema class is an
appreciable percentage of the total object file size of objects in Sema.
By adding a key function, clang is able to optimize the debug info size
by emitting a forward declaration in TUs that do not define the key
function.
On Windows, with clang-cl, these are the total sizes of object files in
Sema before and after this change, compiling with optimizations and
debug info:
before: 335,012 KB
after: 278,116 KB
delta: -56,896 KB
percent: -17.0%
The effect on link time was negligible, despite having ~56MB less input.
On Linux, with clang, these are the same sizes using DWARF -g and
optimizations:
before: 603,756 KB
after: 515,340 KB
delta: -88,416 KB
percent: -14.6%
I didn't use type units, DWARF-5, fission, or any other special flags.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D70340
Continuous mode is not yet supported on Fuchsia/Windows, however an
error should not be reported unless the user attempted to actually
enable continuous mode.
SUMMARY:
CMVC has a compiler error on the
const uint64_t OffsetToRaw = is64Bit()
? toSection64(Sec)->FileOffsetToRawData
: toSection32(Sec)->FileOffsetToRawData;
while gcc compiler do not have the problem.
I have to change the code to
uint64_t OffsetToRaw;
if (is64Bit())
OffsetToRaw = toSection64(Sec)->FileOffsetToRawData;
else
OffsetToRaw = toSection32(Sec)->FileOffsetToRawData;
Reviewers: Sean Fertile
Subscribers: rupprecht, seiyai,hiraditya
Differential Revision: https://reviews.llvm.org/D70255
A call site parameter description of a memory operand needs to
unambiguously convey the size of the operand to prevent incorrect entry
value evaluation.
Thanks for David Stenberg for pointing this issue out!
Pair up inlined AutoreleaseRV calls with their matching RetainRV or
ClaimRV.
- RetainRV cancels out AutoreleaseRV. Delete both instructions.
- ClaimRV is a peephole for RetainRV+Release. Delete AutoreleaseRV and
replace ClaimRV with Release.
This avoids problems where more aggressive inlining triggers memory
regressions.
This patch is happy to skip over non-callable instructions and non-ARC
intrinsics looking for the pair. It is likely sound to also skip over
opaque function calls, but that's harder to reason about, and it's not
relevant to the goal here: if there's an opaque function call splitting
up a pair, it's very unlikely that a handshake would have happened
dynamically without inlining.
Note that this patch also subsumes the previous logic that looked
backwards from ReleaseRV.
https://reviews.llvm.org/D70370
rdar://problem/46509586
The 1st attempt was reverted because it revealed an existing
bug where we could produce invalid IR (use of value before
definition). That should be fixed with:
rG39de82ecc9c2
The bug manifests as replacing a reduction operand with an undef
value.
The problem appears to be limited to cases where a min/max reduction
has extra uses of the compare operand to the select.
In the general case, we are tracking "ExternallyUsedValues" and
an "IgnoreList" of the reduction operations, but those may not apply
to the final compare+select in a min/max reduction.
For that, we use replaceAllUsesWith (RAUW) to ensure that the new
vectorized reduction values are transferred to all subsequent users.
Differential Revision: https://reviews.llvm.org/D70148
Summary:
In particular, 1- and 2-byte loads and stores ignore the pointer tag
when using SP as the base register.
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70341
Summary:
This also changes the test-release.sh script to build using the monorepo
layout instead of copying sub-projects into llvm/tools or llvm/projects.
Reviewers: jdoerfert, hans
Reviewed By: hans
Subscribers: hans, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70353
This speeds up the build of compiler-rt with an expensive checks enabled clang by an order of
1 or 2 magnitudes on my machine. I was hoping this would also fix the 'large.test' libFuzzer
timeout on the expensive checks bot on green dragon http://lab.llvm.org:8080/green/job/clang-stage1-cmake-RA-expensive/,
but the fuzzer test still takes too long to compile because of other IR/MIR verification inefficiencies.
Differential Revision: https://reviews.llvm.org/D70288
This is an attempt to feature the user-facing resources more
prominently on the LLDB website by calling out the tutorial and the
GDB command map wight on the start page.
I also moved the "Why a new debugger" section to the "Goals"
subpage. Given that LLDB's first release is almost a decade in the
past now, the title is a bit of an anachronism.
Lastly, I moved the Architecture sub-page from "use" to "resources",
since end-users do not care about the source code layout.
Differential Revision: https://reviews.llvm.org/D70449
Now that we have the intrinsics, we can add VLD2/4 and VST2/4 lowering
for MVE. This works the same way as Neon, recognising the load/shuffles
combination and converting them into intrinsics in a pre-isel pass,
which just calls getMaxSupportedInterleaveFactor, lowerInterleavedLoad
and lowerInterleavedStore.
The main difference to Neon is that we do not have a VLD3 instruction.
Otherwise most of the code works very similarly, with just some minor
differences in the form of the intrinsics to work around. VLD3 is
disabled by making isLegalInterleavedAccessType return false for those
cases.
We may need some other future adjustments, such as VLD4 take up half the
available registers so should maybe cost more. This patch should get the
basics in though.
Differential Revision: https://reviews.llvm.org/D69392
SUMMARY:
implement printing out raw section data of xcoff objectfile for llvm-objdump
and option -D --disassemble-all option for llvm-objdump
Reviewers: Sean Fertile
Subscribers: rupprecht, seiyai,hiraditya
Differential Revision: https://reviews.llvm.org/D70255
Avoids a deadlock in "clang/test/Index/crash-recovery-modules.m" when building with the MSVC STL & _ITERATOR_DEBUG_LEVEL == 2 (meaning a DEBUG build)
Differential Revision: https://reviews.llvm.org/D69959
Summary:
The sanitizer symbolizers support printing the function offset
(difference between pc and function start) of a stackframe using the
`%q` format specifier.
Unfortunately this didn't actually work because neither the atos
or dladdr symbolizer set the `AddressInfo::function_offset` field.
This patch teaches both symbolizers to try to compute the function
offset. In the case of the atos symbolizer, atos might not report the
function offset (e.g. it reports a source location instead) so in this
case it fallsback to using `dladdr()` to compute the function offset.
Two test cases are included.
rdar://problem/56695185
Reviewers: kubamracek, yln
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69549
The CUDA builtin library is apparently compiled in C++ mode, so the
assumption of convergent needs to be made in a typically non-SPMD
language. The functions in the library should still be assumed
convergent. Currently they are not, which is potentially incorrect and
this happens to work after the library is linked.
Summary:
Adds an optional parameter to `buildASTFromCodeWithArgs` that allows the user to
pass additional files that the main code needs to compile. This change makes
`buildASTFromCodeWithArgs` consistent with `runToolOnCodeWithArgs`.
Patch by Alexey Eremin.
Reviewers: gribozavr
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D70175
An advantage is that there are less portability concerns when writing
tests. For example, `-u` is not supported by all implementations of
`env`, but lit's internal shell provides its own `env` that supports
`-u`.
A disadvantage is that some shell constructs, such as parentheses, are
not supported, but FileCheck's test suite currently doesn't require
such constructs.
For comparison, lit configures its test suite in the same manner. See
`llvm/utils/lit/tests/lit.cfg`.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D70278
Based on D70020 by serge-sans-paille.
The ELF spec says:
> Furthermore, there may be internal references among these sections that would not make sense if one of the sections were removed or replaced by a duplicate from another object. Therefore, such groups must be included or omitted from the linked object as a unit. A section cannot be a member of more than one group.
GNU ld has 2 behaviors that we don't have:
- Group members (nextInSectionGroup != nullptr) are subject to garbage collection.
This includes non-SHF_ALLOC SHT_NOTE sections.
In particular, discarding non-SHF_ALLOC SHT_NOTE sections is an expected behavior by the Annobin
project. See
https://developers.redhat.com/blog/2018/02/20/annobin-storing-information-binaries/
for more information.
- Groups members are retained or discarded as a unit.
Members may have internal references that are not expressed as
SHF_LINK_ORDER, relocations, etc. It seems that we should be more conservative here:
if a section is marked live, mark all the other member within the
group.
Both behaviors are reasonable. This patch implements them.
A new field InputSectionBase::nextInSectionGroup tracks the next member
within a group. on ELF64, this increases sizeof(InputSectionBase) froms
144 to 152.
InputSectionBase::dependentSections tracks section dependencies, which
is used by both --gc-sections and /DISCARD/. We can't overload it for
the "next member" semantic, because we should allow /DISCARD/ to discard
sections independent of --gc-sections (GNU ld behavior). This behavior
may be reasonably used by `/DISCARD/ : { *(.ARM.exidx*) }` or `/DISCARD/
: { *(.note*) }` (new test `linkerscript/discard-group.s`).
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D70146
Cleanup handling of the denormal-fp-math attribute. Consolidate places
checking the allowed names in one place.
This is in preparation for introducing FP type specific variants of
the denormal-fp-mode attribute. AMDGPU will switch to using this in
place of the current hacky use of subtarget features for the denormal
mode.
Introduce a new header for dealing with FP modes. The constrained
intrinsic classes define related enums that should also be moved into
this header for uses in other contexts.
The verifier could use a check to make sure the denorm-fp-mode
attribute is sane, but there currently isn't one.
Currently, DAGCombiner incorrectly asssumes non-IEEE behavior by
default in the one current user. Clang must be taught to start
emitting this attribute by default to avoid regressions when this is
switched to assume ieee behavior if the attribute isn't present.
Summary:
This is a new warning which fires when one stores a reference to the
initializer_list contents in a way which may outlive the
initializer_list which it came from. In llvm this warning is triggered
whenever someone uses the initializer_list ArrayRef constructor.
This is indeed a dangerous thing to do (I myself was bitten by that at
least once), but it is not more dangerous than calling other ArrayRef
constructors with temporary objects -- something which we are used to
and have accepted as a tradeoff for ArrayRef's efficiency.
Currently, this warnings generates so much output that it completely
obscures any actionable warnings, so this patch disables it.
Reviewers: rnk, aaron.ballman
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70122
The const-correctness of match() was fixed in rL372764, which allows
uses of Regex objects to be const in cases they couldn't be before. This
patch tightens up the const-ness of Regex in various such cases.
Reviewers: thopre
Reviewed By: thopre
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D68155
This patch implements writing function descriptors and TOC base into
data section, and also add function descriptors(both csect and label)
and TOC base symbols to the symbol table.
Summary:
readability-redundant-member-init removes redundant / unnecessary member and base class initialization. Unfortunately for the specific case of a copy constructor's initialization of a base class, gcc at strict warning levels warns if "base class is not initialized in the copy constructor of a derived class".
This patch adds an option `IgnoreBaseInCopyConstructors` defaulting to 0 (thus maintaining current behavior by default) to skip the specific case of removal of redundant base class initialization in the copy constructor. Enabling this option enables the resulting code to continue to compile successfully under `gcc -Werror=extra`. New test cases `WithCopyConstructor1` and `WithCopyConstructor2` in clang-tools-extra/test/clang-tidy/readability-redundant-member-init.cpp show that it removes redundant members even from copy constructors.
Reviewers: malcolm.parsons, alexfh, hokein, aaron.ballman, lebedev.ri
Patch by: poelmanc
Subscribers: mgehre, lebedev.ri, cfe-commits
Tags: #clang, #clang-tools-extra
Differential revision: https://reviews.llvm.org/D69145
As discussed in D70148 (and caused a revert of the original commit):
if we insert at the select, then we can produce invalid IR because
the replacement for the compare may have uses before the select.
This fills in the small family of MVE intrinsics that have nothing to
do with vectors: they implement bit-shift operations on 32- or 64-bit
values held in one or two general-purpose registers. Most of these
shift operations saturate if shifting left, and round to nearest if
shifting right, although LSLL and ASRL behave like ordinary shifts.
When these instructions take a variable shift count in a register,
they pay attention to its sign, so that (for example) LSLL or UQRSHLL
will shift left if given a positive number but right if given a
negative one. That makes even LSLL and ASRL different enough from
standard LLVM IR shift semantics that I couldn't see any better
alternative than to simply model the whole family as a set of
MVE-specific IR intrinsics.
(The //immediate// forms of LSLL and ASRL, on the other hand, do
behave exactly like a standard IR shift of a 64-bit value. In fact,
those forms don't have ACLE intrinsics defined at all, because you can
just write an ordinary C shift operation if you want one of those.)
The 64-bit shifts have to be instruction-selected in C++, because they
deliver two output values. But the 32-bit ones are simple enough that
I could write a DAG isel pattern directly into each Instruction
record.
Reviewers: ostannard, MarkMurrayARM, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70319
Start moving towards treating this as a property of the calling
convention, and not the subtarget. The default denormal mode should
not be part of the subtarget, and be moved into a separate function
attribute.
This patch is still NFC. The denormal mode remains as a subtarget
feature for now, but make the necessary changes to switch to using an
attribute.
Summary:
This is mostly mechanical, with a few exceptions:
- getDeducedType moved into AST.h where it belongs. It now takes
ASTContext instead of ParsedAST, and avoids using the preprocessor.
- hover now uses SelectionTree directly rather than via
getDeclAtPosition helper
- hover on 'auto' used to find the decl that contained the 'auto' and
use that to set Kind and documentation for the hover result.
Now we use targetDecl() to find the decl matching the deduced type instead.
This changes tests, e.g. 'variable' -> class for auto on lambdas.
I think this is better, but the motivation was to avoid depending on
the internals of DeducedTypeVisitor. This functionality is removed
from the visitor.
Reviewers: kadircet
Subscribers: mgorny, ilya-biryukov, MaskRay, jkorous, arphaman, usaxena95, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D70357
Vedant Kumar