This patch fixes process event handling when the events are broadcasted
at launch. To do so, the patch introduces a new listener to fetch events
by hand off the event queue and then resending them ensure the event ordering.
Differental Revision: https://reviews.llvm.org/D105698
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
AArch64 architecture support virtual addresses with some of the top bits ignored.
These ignored bits can host memory tags or bit masks that can serve to check for
authentication of address integrity. We need to clear away the top ignored bits
from watchpoint address to reliably hit and set watchpoints on addresses
containing tags or masks in their top bits.
This patch adds support to watch tagged addresses on AArch64/Linux.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D101361
While on regular Linux system (Fedora 34 GA, not updated):
* thread #1, name = '1', stop reason = hit program assert
frame #0: 0x00007ffff7e242a2 libc.so.6`raise + 322
frame #1: 0x00007ffff7e0d8a4 libc.so.6`abort + 278
frame #2: 0x00007ffff7e0d789 libc.so.6`__assert_fail_base.cold + 15
frame #3: 0x00007ffff7e1ca16 libc.so.6`__assert_fail + 70
* frame #4: 0x00000000004011bd 1`main at assert.c:7:3
On Fedora 35 pre-release one gets:
* thread #1, name = '1', stop reason = signal SIGABRT
* frame #0: 0x00007ffff7e48ee3 libc.so.6`pthread_kill@GLIBC_2.2.5 + 67
frame #1: 0x00007ffff7dfb986 libc.so.6`raise + 22
frame #2: 0x00007ffff7de5806 libc.so.6`abort + 230
frame #3: 0x00007ffff7de571b libc.so.6`__assert_fail_base.cold + 15
frame #4: 0x00007ffff7df4646 libc.so.6`__assert_fail + 70
frame #5: 0x00000000004011bd 1`main at assert.c:7:3
I did not write a testcase as one needs the specific glibc. An
artificial test would just copy the changed source.
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D105133
This patch implements a slight improvement when debugging across
platforms and remapping source paths that are in a non-native
format. See the unit test for examples.
rdar://79205675
Differential Revision: https://reviews.llvm.org/D104407
NFC.
This patch replaces the function body FindFile() with a call to
RemapPath(), since the two functions implement the same functionality.
Differential Revision: https://reviews.llvm.org/D104406
This is an NFC modernization refactoring that replaces the combination
of a bool return + reference argument, with an Optional return value.
Differential Revision: https://reviews.llvm.org/D104405
This is an NFC modernization refactoring that replaces the combination
of a bool return + reference argument, with an Optional return value.
Differential Revision: https://reviews.llvm.org/D104404
This adds GDB client support for the qMemTags packet
which reads memory tags. Following the design
which was recently committed to GDB.
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(look for qMemTags)
lldb commands will use the new Process methods
GetMemoryTagManager and ReadMemoryTags.
The former takes a range and checks that:
* The current process architecture has an architecture plugin
* That plugin provides a MemoryTagManager
* That the range of memory requested lies in a tagged range
(it will expand it to granules for you)
If all that was true you get a MemoryTagManager you
can give to ReadMemoryTags.
This two step process is done to allow commands to get the
tag manager without having to read tags as well. For example
you might just want to remove a logical tag, or error early
if a range with tagged addresses is inverted.
Note that getting a MemoryTagManager doesn't mean that the process
or a specific memory range is tagged. Those are seperate checks.
Having a tag manager just means this architecture *could* have
a tagging feature enabled.
An architecture plugin has been added for AArch64 which
will return a MemoryTagManagerAArch64MTE, which was added in a
previous patch.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95602
As a follow up of D103588, I'm reinitiating the discussion with a new proposal for traversing instructions in a trace which uses the feedback gotten in that diff.
See the embedded documentation in TraceCursor for more information. The idea is to offer an OOP way to traverse instructions exposing a minimal interface that makes no assumptions on:
- the number of instructions in the trace (i.e. having indices for instructions might be impractical for gigantic intel-pt traces, as it would require to decode the entire trace). This renders the use of indices to point to instructions impractical. Traces are big and expensive, and the consumer should try to do look linear lookups (forwards and/or backwards) and avoid random accesses (the API could be extended though, but for now I want to dicard that funcionality and leave the API extensible if needed).
- the way the instructions are represented internally by each Trace plug-in. They could be mmap'ed from a file, exist in plain vector or generated on the fly as the user requests the data.
- the actual data structure used internally for each plug-in. Ideas like having a struct TraceInstruction have been discarded because that would make the plug-in follow a certain data type, which might be costly. Instead, the user can ask the cursor for each independent property of the instruction it's pointing at.
The way to get a cursor is to ask Trace.h for the end or being cursor or a thread's trace.
There are some benefits of this approach:
- there's little cost to create a cursor, and this allows for lazily decoding a trace as the user requests data.
- each trace plug-in could decide how to cache the instructions it generates. For example, if a trace is small, it might decide to keep everything in memory, or if the trace is massive, it might decide to keep around the last thousands of instructions to speed up local searches.
- a cursor can outlive a stop point, which makes trace comparison for live processes feasible. An application of this is to compare profiling data of two runs of the same function, which should be doable with intel pt.
Differential Revision: https://reviews.llvm.org/D104422
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
This is an NFC cleanup.
Many of the API's that returned BreakpointOptions always returned valid ones.
Internally the BreakpointLocations usually have null BreakpointOptions, since they
use their owner's options until an option is set specifically on the location.
So the original code used pointers & unique_ptr everywhere for consistency.
But that made the code hard to reason about from the outside.
This patch changes the code so that everywhere an API is guaranteed to
return a non-null BreakpointOption, it returns it as a reference to make
that clear.
It also changes the Breakpoint to hold a BreakpointOption
member where it previously had a UP. Since we were always filling the UP
in the Breakpoint constructor, having the UP wasn't helping anything.
Differential Revision: https://reviews.llvm.org/D104162
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
Previously ignore counts were checked when we stopped to do the sync callback in Breakpoint::ShouldStop. That meant we would do all the ignore count work even when
there is also a condition says the breakpoint should not stop.
That's wrong, lldb treats breakpoint hits that fail the thread or condition checks as "not having hit the breakpoint". So the ignore count check should happen after
the condition and thread checks in StopInfoBreakpoint::PerformAction.
The one side-effect of doing this is that if you have a breakpoint with a synchronous callback, it will run the synchronous callback before checking the ignore count.
That is probably a good thing, since this was already true of the condition and thread checks, so this removes an odd asymmetry. And breakpoints with sync callbacks
are all internal lldb breakpoints and there's not a really good reason why you would want one of these to use an ignore count (but not a condition or thread check...)
Differential Revision https://reviews.llvm.org/D103217
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
More decoupling of plugins and non-plugins. Target doesn't need to
manage ClangModulesDeclVendor and ClangPersistentVariables is always available
in situations where you need ClangModulesDeclVendor.
Differential Revision: https://reviews.llvm.org/D102811
TestMultipleTargets is randomly failing on the bots. The reason for that is that
the test is calling `SBDebugger::CreateTarget` from multiple threads.
`TargetList::CreateTarget` is curiously missing the guard that all of its other
member functions have, so all the threads in the test end up changing the
internal TargetList state at the same time and end up corrupting it.
Reviewed By: vsk, JDevlieghere
Differential Revision: https://reviews.llvm.org/D103020
A long time ago LLDB wanted to start using StringRef instead of
C-Strings/ConstString but was blocked by the fact that the StringRef constructor
that takes a C-string was asserting that the C-string isn't a nullptr. To
workaround this, D24697 introduced a special function called `withNullAsEmpty`
and that's what LLDB (and only LLDB) started to use to build StringRefs from
C-strings.
A bit later it seems that `withNullAsEmpty` was declared too awkward to use and
instead the assert in the StringRef constructor got removed (see D24904). The
rest of LLDB was then converted to StringRef by just calling the now perfectly
usable implicit constructor.
However, all the calls to `withNullAsEmpty` just remained and are now just
strange artefacts in the code base that just look out of place. It's also
curiously a LLDB-exclusive function and no other project ever called it since
it's introduction half a decade ago.
This patch removes all uses of `withNullAsEmpty`. The follow up will be to
remove the function from StringRef.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102597
This reverts commit bd5751f3d2.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
The Mips in DW_LANG_Mips_Assembler is a vendor name not an
architecture name and in lack of a proper generic DW_LANG_assembler,
some assemblers emit DWARF using this tag. Due to a warning I recently
introduced users will now be greeted with
This version of LLDB has no plugin for the mipsassem language. Inspection of frame variables will be limited.
By renaming this to just "Assembler" this error message will make more sense.
Differential Revision: https://reviews.llvm.org/D101406
rdar://77214764
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
This change ensures that if for whatever reason we read less bytes than expected (for example, when trying to read memory that spans multiple sections), we try reading from the live process as well.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D101390
When dumping the traced instructions in a for loop, like this one
4: for (int a = 0; a < n; a++)
5: do something;
there might be multiple LineEntry objects for line 4, but with different address ranges. This was causing the dump command to dump something like this:
```
a.out`main + 11 at main.cpp:4
[1] 0x0000000000400518 movl $0x0, -0x8(%rbp)
[2] 0x000000000040051f jmp 0x400529 ; <+28> at main.cpp:4
a.out`main + 28 at main.cpp:4
[3] 0x0000000000400529 cmpl $0x3, -0x8(%rbp)
[4] 0x000000000040052d jle 0x400521 ; <+20> at main.cpp:5
```
which is confusing, as main.cpp:4 appears twice consecutively.
This diff fixes that issue by making the line entry comparison strictly about the line, column and file name. Before it was also comparing the address ranges, which we don't need because our output is strictly about what the user sees in the source.
Besides, I've noticed that the logic that traverses instructions and calculates symbols and disassemblies had too much coupling, and made my changes harder to implement, so I decided to decouple it. Now there are two methods for iterating over the instruction of a trace. The existing one does it on raw load addresses, but the one provides a SymbolContext and an InstructionSP, and does the calculations efficiently (not as efficient as possible for now though), so the caller doesn't need to care about these details. I think I'll be using that iterator to reconstruct the call stacks.
I was able to fix a test with this change.
Differential Revision: https://reviews.llvm.org/D100740
This patch refactors a good part of the code base turning the usual
FileSpec, Line, Column, CheckInlines, ExactMatch arguments into a
SourceLocationSpec object.
This change is required for a following patch that will add handling of the
column line information when doing symbol resolution.
Differential Revision: https://reviews.llvm.org/D100965
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Introduce three new stop reasons for fork, vfork and vforkdone events.
This includes server support for serializing fork/vfork events into
gdb-remote protocol. The stop infos for the two base events take a pair
of PID and TID for the newly forked process.
Differential Revision: https://reviews.llvm.org/D100196
Landing this fix for Augusto Noronha. The code is getting the
Section from 'addr' passed in, but it may have been expressed as
a load address when it was created and Target::ReadMemory tries to
convert it to a Section+offset if that's now possible; use the
Section found from that cleanup if it exists.
Differential Revision: https://reviews.llvm.org/D100850
Commiting this patch for Augusto Noronha who is getting set
up still.
This patch changes Target::ReadMemory so the default behavior
when a read is in a Section that is read-only is to fetch the
data from the local binary image, instead of reading it from
memory. Update all callers to use their old preferences
(the old prefer_file_cache bool) using the new API; we should
revisit these calls and see if they really intend to read
live memory, or if reading from a read-only Section would be
equivalent and important for performance-sensitive cases.
rdar://30634422
Differential revision: https://reviews.llvm.org/D100338
Implement FixCodeAddress and FixDataAddress for ABIMacOSX_arm64 and
ABISysV_arm64 and add missing calls to RegisterContextUnwind. We need
this to unwind on Apple Silicon where libraries like libSystem are
arm64e even when the program being debugged is arm64.
Differential revision: https://reviews.llvm.org/D100521
Add a code and data address mask to Process with respective getters and
setters and a setting that allows the user to specify the mast as a
number of addressable bits. The masks will be used by FixCodeAddress and
FixDataAddress respectively in the ABI classes.
Differential revision: https://reviews.llvm.org/D100515
It looks like the goal of this code is to provide a more precise
architecture definition for the target when attaching to a process. When
attaching to a foreign debugserver, you might get into a situation where
the active (host) platform will give you bogus information on the target
process.
This change allows the platform to override the target arch only with a
compatible architecture. This fixes TestTargetXMLArch.py on Apple
Silicon. Another alternative would be to just fail in this scenario and
update the test(s).
That code is unused since it's check-in in 2010 (and I believe it would leak
memory when called as it releases the passed unique_ptr), so let's delete it.
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D100212
When debugging LanguageRuntime unwindplans, it can be
helpful to disable their use and see the normal
stack walk. Add a setting for this.
Differential Revision: https://reviews.llvm.org/D99828
Inline callstacks were being incorrectly displayed in the results of "image lookup --address". The deepest frame wasn't displaying the line table line entry, it was always showing the inline information's call file and line on the previous frame. This is now fixed and has tests to make sure it doesn't regress.
Differential Revision: https://reviews.llvm.org/D98761
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
The StopInfoBreakpoint::PerformAction was overriding the synchronous
breakpoint's ShouldStop report. Fix that and add a test.
This fixes two bugs in the original submission:
1) Actually generate both dylibs by including the second one in the Makefile
2) Don't ask synchronous callbacks for their opinion on whether to stop
in the async context, that info is taken care of by recording the m_should_stop
on entry to PerformAction.
Differential Revision: https://reviews.llvm.org/D98914
This patch introduces Scripted Processes to lldb.
The goal, here, is to be able to attach in the debugger to fake processes
that are backed by script files (in Python, Lua, Swift, etc ...) and
inspect them statically.
Scripted Processes can be used in cooperative multithreading environments
like the XNU Kernel or other real-time operating systems, but it can
also help us improve the debugger testing infrastructure by writting
synthetic tests that simulates hard-to-reproduce process/thread states.
Although ScriptedProcess is not feature-complete at the moment, it has
basic execution capabilities and will improve in the following patches.
rdar://65508855
Differential Revision: https://reviews.llvm.org/D95713
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces Scripted Processes to lldb.
The goal, here, is to be able to attach in the debugger to fake processes
that are backed by script files (in Python, Lua, Swift, etc ...) and
inspect them statically.
Scripted Processes can be used in cooperative multithreading environments
like the XNU Kernel or other real-time operating systems, but it can
also help us improve the debugger testing infrastructure by writting
synthetic tests that simulates hard-to-reproduce process/thread states.
Although ScriptedProcess is not feature-complete at the moment, it has
basic execution capabilities and will improve in the following patches.
rdar://65508855
Differential Revision: https://reviews.llvm.org/D95713
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds a new command options to the CommandObjectProcessLaunch
for scripted processes.
Among the options, the user need to specify the class name managing the
scripted process. The user can also use a key-value dictionary holding
arbitrary data that will be passed to the managing class.
This patch also adds getters and setters to `SBLaunchInfo` for the
class name managing the scripted process and the dictionary.
rdar://65508855
Differential Review: https://reviews.llvm.org/D95710
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This reverts commit 9406d43138.
I messed up a test, and when I got it right it was failing. The changed logic
doesn't work quite right (now the async callback called at sync time is
forcing us to stop. I need to be a little more careful about that.
We weren't taking into account the "m_should_stop" setting that the
synchronous breakpoint callback had already set when we did PerformAction
in the StopInfoBreakpoint. So we didn't obey its instructions when it
told us to stop. Fixed that and added some tests both for when we
just have the setting, and when we have the setting AND other breakpoints
at the shared library load notification breakpoint address.
Differential Revision: https://reviews.llvm.org/D98914
The functionality is not posix specific. Also force the usage of the
gdb-remote process plugin in the gdb platform class.
This is not sufficient to make TestPlatformConnect pass on windows (it
seems it suffers from module loading issues, unrelated to this test),
but it at least makes it shut down correctly, so I change the skip to an
xfail.
Med Ismail Bennani