This patch fixes process event handling when the events are broadcasted
at launch. To do so, the patch introduces a new listener to fetch events
by hand off the event queue and then resending them ensure the event ordering.
Differental Revision: https://reviews.llvm.org/D105698
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds a helper function to test target architecture is
AArch64 or not. This also tightens isAArch64* helpers by adding an
extra architecture check.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D105483
AArch64 architecture support virtual addresses with some of the top bits ignored.
These ignored bits can host memory tags or bit masks that can serve to check for
authentication of address integrity. We need to clear away the top ignored bits
from watchpoint address to reliably hit and set watchpoints on addresses
containing tags or masks in their top bits.
This patch adds support to watch tagged addresses on AArch64/Linux.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D101361
This reverts commit 6775fc6ffa.
It also reverts "[lldb] Fix compilation by adjusting to the new ASTContext signature."
This reverts commit 03a3f86071.
We see some failures on the lldb infrastructure, these changes might play a role
in it. Let's revert it now and see if the bots will become green.
Ref: https://reviews.llvm.org/D104918
I'm not entirely sure this is the problem, but the Windows bot doesn't
seem to like this test. Let's do something similar to
command_import.test which doesn't have that issue.
In order to mirror the GetElementPtrInst::indices() API.
Wanted to use this in the IRForTarget code, and was surprised to
find that it didn't exist yet.
In one case use the source element type of the original GEP. In the
other the correct type isn't obvious to me, so use
getPointerElementType() for now.
Add the ability to silence command script import. The motivation for
this change is being able to add command script import -s
lldb.macosx.crashlog to your ~/.lldbinit without it printing the
following message at the beginning of every debug session.
"malloc_info", "ptr_refs", "cstr_refs", "find_variable", and
"objc_refs" commands have been installed, use the "--help" options on
these commands for detailed help.
In addition to forwarding the silent option to LoadScriptingModule, this
also changes ScriptInterpreterPythonImpl::ExecuteOneLineWithReturn and
ScriptInterpreterPythonImpl::ExecuteMultipleLines to honor the enable IO
option in ExecuteScriptOptions, which until now was ignored.
Note that IO is only enabled (or disabled) at the start of a session,
and for this particular use case, that's done when taking the Python
lock in LoadScriptingModule, which means that the changes to these two
functions are not strictly necessary, but (IMO) desirable nonetheless.
Differential revision: https://reviews.llvm.org/D105327
C++23 will make these conversions ambiguous - so fix them to make the
codebase forward-compatible with C++23 (& a follow-up change I've made
will make this ambiguous/invalid even in <C++23 so we don't regress
this & it generally improves the code anyway)
The current LLDB Python docs are missing documentation for all the special
members such as conversion functions (`__int__`) and other special functions
(`__len__`).
The reason for that is that the `automodapi` plugin we're using to generate the
*.rst files simply doesn't emit them. There doesn't seem to be any config option
to enable those in `automodapi` and it's not even clear why they are filtered. I
assume the leading underscore in their names makes them look like private
methods.
This patch just forcibly adds a few selected special members functions to the
list of functions that sphinx should always document. This will cause sphinx to
warn if a class doesn't have one of those functions but it's better than not
having them documented.
The main motivation here is that since `SBAddress.__int__` is one of the few
functions that is only available in the embedded Python REPL which would be good
to have in the public documentation.
Fixes rdar://64647665
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D105480
This patch adds initial support for forms for the LLDB GUI. The currently
supported form elements are Text fields, Integer fields, Boolean fields, Choices
fields, File fields, Directory fields, and List fields.
A form can be created by subclassing FormDelegate. In the constructor, field
factory methods can be used to add new fields, storing the returned pointer in a
member variable. One or more actions can be added using the AddAction method.
The method takes a function with an interface void(Window &). This function will
be executed whenever the user executes the action.
Example form definition:
```lang=cpp
class TestFormDelegate : public FormDelegate {
public:
TestFormDelegate() {
m_text_field = AddTextField("Text", "The big brown fox.");
m_file_field = AddFileField("File", "/tmp/a");
m_directory_field = AddDirectoryField("Directory", "/tmp/");
m_integer_field = AddIntegerField("Number", 5);
std::vector<std::string> choices;
choices.push_back(std::string("Choice 1"));
choices.push_back(std::string("Choice 2"));
choices.push_back(std::string("Choice 3"));
choices.push_back(std::string("Choice 4"));
choices.push_back(std::string("Choice 5"));
m_choices_field = AddChoicesField("Choices", 3, choices);
m_bool_field = AddBooleanField("Boolean", true);
TextFieldDelegate default_field =
TextFieldDelegate("Text", "The big brown fox.");
m_text_list_field = AddListField("Text List", default_field);
AddAction("Submit", [this](Window &window) { Submit(window); });
}
void Submit(Window &window) { SetError("An example error."); }
protected:
TextFieldDelegate *m_text_field;
FileFieldDelegate *m_file_field;
DirectoryFieldDelegate *m_directory_field;
IntegerFieldDelegate *m_integer_field;
BooleanFieldDelegate *m_bool_field;
ChoicesFieldDelegate *m_choices_field;
ListFieldDelegate<TextFieldDelegate> *m_text_list_field;
};
```
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D104395
References with a single '`' around them are interpreted as references instead
of text with monospaced font since the introduction of the new Python API
generator. This meant that all the single-quoted code in this document that
doesn't reference any Python class was throwing sphinx errors. This just adds
the neede extra ` around this code and fixed up the legitimate typos
(e.g. `SBframe` -> `SBFrame`).
This patch fixes a failure in `TestFunctionStarts.py` that appeared
following a change of implementation for synthetic symbol names:
https://reviews.llvm.org/D105160
The failure is caused because the previously mentioned patch removes the
object file basename from the generated synthetic symbol names to allow
them to be shared in the constant string pool.
Hence, that last check is not necessary anymore.
rdar://80092322
Differential Revision: https://reviews.llvm.org/D105366
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Extend the SetCurrentThread() method to support specifying an alternate
PID to switch to. This makes it possible to issue requests to forked
processes.
Differential Revision: https://reviews.llvm.org/D100262
Refactor SetCurrentThread() and SetCurrentThreadForRun() to reduce code
duplication and simplify it. Both methods now call common
SendSetCurrentThreadPacket() that implements the common protocol
exchange part (the only variable is sending `Hg` vs `Hc`) and returns
the selected TID. The logic is rewritten to use a StreamString
instead of snprintf().
A side effect of the change is that thread-id sent is now zero-padded.
However, this should not have practical impact on the server as both
forms are equivalent.
Differential Revision: https://reviews.llvm.org/D100459
Support using the extended thread-id syntax with Hg packet to select
a subprocess. This makes it possible to start providing support for
running some of the debugger packets against another subprocesses.
Differential Revision: https://reviews.llvm.org/D100261
While on regular Linux system (Fedora 34 GA, not updated):
* thread #1, name = '1', stop reason = hit program assert
frame #0: 0x00007ffff7e242a2 libc.so.6`raise + 322
frame #1: 0x00007ffff7e0d8a4 libc.so.6`abort + 278
frame #2: 0x00007ffff7e0d789 libc.so.6`__assert_fail_base.cold + 15
frame #3: 0x00007ffff7e1ca16 libc.so.6`__assert_fail + 70
* frame #4: 0x00000000004011bd 1`main at assert.c:7:3
On Fedora 35 pre-release one gets:
* thread #1, name = '1', stop reason = signal SIGABRT
* frame #0: 0x00007ffff7e48ee3 libc.so.6`pthread_kill@GLIBC_2.2.5 + 67
frame #1: 0x00007ffff7dfb986 libc.so.6`raise + 22
frame #2: 0x00007ffff7de5806 libc.so.6`abort + 230
frame #3: 0x00007ffff7de571b libc.so.6`__assert_fail_base.cold + 15
frame #4: 0x00007ffff7df4646 libc.so.6`__assert_fail + 70
frame #5: 0x00000000004011bd 1`main at assert.c:7:3
I did not write a testcase as one needs the specific glibc. An
artificial test would just copy the changed source.
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D105133
Commit 090306fc80 (August 2020) changed most of the arm64 SVE_PT*
macros, but apparently did not make the changes in the
NativeRegisterContextLinux_arm64.* files (or those files were pulled
over from someplace else after that commit). This change replaces the
macros NativeRegisterContextLinux_arm64.cpp with the replacement
definitions in LinuxPTraceDefines_arm64sve.h. It also includes
LinuxPTraceDefines_arm64sve.h in NativeRegisterContextLinux_arm64.h.
Differential Revision: https://reviews.llvm.org/D104826
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D105160
This patch implements a slight improvement when debugging across
platforms and remapping source paths that are in a non-native
format. See the unit test for examples.
rdar://79205675
Differential Revision: https://reviews.llvm.org/D104407
NFC.
This patch replaces the function body FindFile() with a call to
RemapPath(), since the two functions implement the same functionality.
Differential Revision: https://reviews.llvm.org/D104406
This is an NFC modernization refactoring that replaces the combination
of a bool return + reference argument, with an Optional return value.
Differential Revision: https://reviews.llvm.org/D104405
Reverts commits:
"Fix failing tests after https://reviews.llvm.org/D104488."
"Fix buildbot failure after https://reviews.llvm.org/D104488."
"Create synthetic symbol names on demand to improve memory consumption and startup times."
This series of commits broke the windows lldb bot and then failed to fix all of the failing tests.
When we check whether the Objective-C SPI is available, we need to check
for the mangled symbol name. Unlike `objc_copyRealizedClassList`, which
is C exported, the `nolock` variant is not.
Differential revision: https://reviews.llvm.org/D105136
I didn't get around to fix this change and the original commit itself seems
fine, so this looks like an existing LLDB/Clang bug that was just uncovered
by this change. Skipping while I'm investigating.
Previously, when `interpreter.save-session-on-quit` was enabled, lldb
would save the session transcript only when running the `quit` command.
This patch changes that so the transcripts are saved when the debugger
object is destroyed if the setting is enabled.
rdar://72902650
Differential Revision: https://reviews.llvm.org/D105038
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new interpreter setting
`interpreter.save-session-directory` so the user can specify a directory
where the session transcripts will be saved.
If not set, the session transcript are saved on a temporary file.
rdar://72902842
Differential Revision: https://reviews.llvm.org/D105030
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D104488
This patch fixes a bug in dotest.py where lldb.selected_platform was
being set to host platform even after a successful connection to a
remote platform via platform url. This patch fixes this behavior and
sets selected_platform to remote_platform after a successful connection.
This patch also removes target_platform variable from run_suite.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D105060
When we run `xcrun` we don't have any user input in our command so relying on
the user's default shell doesn't make a lot of sense. If the user has set the
system shell to a something that isn't supported yet (dash, ash) then we would
run into the problem that we don't know how to escape our command string.
This patch just avoids using any shell at all as xcrun is always at the same
path.
Reviewed By: aprantl, JDevlieghere, kastiglione
Differential Revision: https://reviews.llvm.org/D104653
Remove the lldb/lldb subdirectory which I must have accidentally created
when applying a patch with the wrong prefix number.
Thank you Nico Weber for pointing this out!
Med Ismail Bennani