Summary:
Support vector type G_MERGE_VALUES selection. For now G_MERGE_VALUES marked as legal for any type, so nothing to do in legalizer.
Split from https://reviews.llvm.org/D33665
Reviewers: qcolombet, t.p.northover, zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, kristof.beyls, guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D33958
llvm-svn: 306665
CFI instructions that set appropriate cfa offset and cfa register are now
inserted in emitEpilogue() in X86FrameLowering.
Majority of the changes in this patch:
1. Ensure that CFI instructions do not affect code generation.
2. Enable maintaining correct information about cfa offset and cfa register
in a function when basic blocks are reordered, merged, split, duplicated.
These changes are target independent and described below.
Changed CFI instructions so that they:
1. are duplicable
2. are not counted as instructions when tail duplicating or tail merging
3. can be compared as equal
Add information to each MachineBasicBlock about cfa offset and cfa register
that are valid at its entry and exit (incoming and outgoing CFI info). Add
support for updating this information when basic blocks are merged, split,
duplicated, created. Add a verification pass (CFIInfoVerifier) that checks
that outgoing cfa offset and register of predecessor blocks match incoming
values of their successors.
Incoming and outgoing CFI information is used by a late pass
(CFIInstrInserter) that corrects CFA calculation rule for a basic block if
needed. That means that additional CFI instructions get inserted at basic
block beginning to correct the rule for calculating CFA. Having CFI
instructions in function epilogue can cause incorrect CFA calculation rule
for some basic blocks. This can happen if, due to basic block reordering,
or the existence of multiple epilogue blocks, some of the blocks have wrong
cfa offset and register values set by the epilogue block above them.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D18046
llvm-svn: 306529
•static latency
•number of uOps from which the instructions consists
•all ports used by the instruction
Reviewers:
RKSimon
zvi
aymanmus
m_zuckerman
Differential Revision: https://reviews.llvm.org/D33897
llvm-svn: 306414
[X86][AVX512] Improve lowering of AVX512 compare intrinsics (remove redundant shift left+right instructions).
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 306402
The non-AVX-512 behavior was changed in r248266 to match N1778
(C bindings for IEEE-754 (2008)), which defined the four functions
to not raise the inexact exception ("rint" is still defined as raising
it).
Update the AVX-512 lowering of these functions to match that: it should
not be different.
llvm-svn: 306299
Convert vector increment or decrement to sub/add with an all-ones constant:
add X, <1, 1...> --> sub X, <-1, -1...>
sub X, <1, 1...> --> add X, <-1, -1...>
The all-ones vector constant can be materialized using a pcmpeq instruction that is
commonly recognized as an idiom (has no register dependency), so that's better than
loading a splat 1 constant.
AVX512 uses 'vpternlogd' for 512-bit vectors because there is apparently no better
way to produce 512 one-bits.
The general advantages of this lowering are:
1. pcmpeq has lower latency than a memop on every uarch I looked at in Agner's tables,
so in theory, this could be better for perf, but...
2. That seems unlikely to affect any OOO implementation, and I can't measure any real
perf difference from this transform on Haswell or Jaguar, but...
3. It doesn't look like it from the diffs, but this is an overall size win because we
eliminate 16 - 64 constant bytes in the case of a vector load. If we're broadcasting
a scalar load (which might itself be a bug), then we're replacing a scalar constant
load + broadcast with a single cheap op, so that should always be smaller/better too.
4. This makes the DAG/isel output more consistent - we use pcmpeq already for padd x, -1
and psub x, -1, so we should use that form for +1 too because we can. If there's some
reason to favor a constant load on some CPU, let's make the reverse transform for all
of these cases (either here in the DAG or in a later machine pass).
This should fix:
https://bugs.llvm.org/show_bug.cgi?id=33483
Differential Revision: https://reviews.llvm.org/D34336
llvm-svn: 306289
Summary:
Support vector type G_EXTRACT selection. For now G_EXTRACT marked as legal for any type, so nothing to do in legalizer.
Split from https://reviews.llvm.org/D33665
Reviewers: qcolombet, t.p.northover, zvi, guyblank
Reviewed By: guyblank
Subscribers: guyblank, rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33957
llvm-svn: 306240
The cost of an interleaved access was only implemented for AVX512. For other
X86 targets an overly conservative Base cost was returned, resulting in
avoiding vectorization where it is actually profitable to vectorize.
This patch starts to add costs for AVX2 for most prominent cases of
interleaved accesses (stride 3,4 chars, for now).
Note1: Improvements of up to ~4x were observed in some of EEMBC's rgb
workloads; There is also a known issue of 15-30% degradations on some of these
workloads, associated with an interleaved access followed by type
promotion/widening; the resulting shuffle sequence is currently inefficient and
will be improved by a series of patches that extend the X86InterleavedAccess pass
(such as D34601 and more to follow).
Note 2: The costs in this patch do not reflect port pressure penalties which can
be very dominant in the case of interleaved accesses since most of the shuffle
operations are restricted to a single port. Further tuning, that may incorporate
these considerations, will be done on top of the upcoming improved shuffle
sequences (that is, along with the abovementioned work to extend
X86InterleavedAccess pass).
Differential Revision: https://reviews.llvm.org/D34023
llvm-svn: 306238
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
Commit r306010 adjusted the condition as follows:
- if (Is64Bit) {
+ if (!STI.isTargetWin32()) {
The intent was to preserve the behavior on all Windows platforms
but extend the behavior on 64-bit Windows platforms to every
other one. (Before r306010, emitStackProbeCall only ever executed
when emitting code for Windows triples.)
Unfortunately,
if (Is64Bit && STI.isOSWindows())
is not the same as
if (!STI.isTargetWin32())
because of the way isTargetWin32() is defined:
bool isTargetWin32() const {
return !In64BitMode && (isTargetCygMing() ||
isTargetKnownWindowsMSVC());
}
In practice this broke the JIT tests on 32-bit Windows, which did not
satisfy the new condition:
LLVM :: ExecutionEngine/MCJIT/2003-01-15-AlignmentTest.ll
LLVM :: ExecutionEngine/MCJIT/2003-08-15-AllocaAssertion.ll
LLVM :: ExecutionEngine/MCJIT/2003-08-23-RegisterAllocatePhysReg.ll
LLVM :: ExecutionEngine/MCJIT/test-loadstore.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-01-15-AlignmentTest.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-08-15-AllocaAssertion.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-08-23-RegisterAllocatePhysReg.ll
LLVM :: ExecutionEngine/OrcMCJIT/test-loadstore.ll
because %esp was not updated correctly. The failures are only visible
on a MSVC 2017 Debug build, for which we do not have bots.
llvm-svn: 306142
X86_64 COFF only has support for 32 bit pcrel relocations. Produce an
error on all others.
Note that gnu as has extended the relocation values to support
this. It is not clear if we should support the gnu extension.
llvm-svn: 306082
Details: There was a use but it was in the assert which was not
exercised during product build.
Reviewers: Andrew Kaylor
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32658
llvm-svn: 306073
This is very similar to the transform in:
https://reviews.llvm.org/rL306040
...but in this case, we use cmp X, 1 to set the carry bit as needed.
Again, we can show that all of these are logically equivalent (although
InstCombine currently canonicalizes to a form not seen here), and if
we believe IACA, then this is the smallest/fastest code. Eg, with SNB:
| Num Of | Ports pressure in cycles | |
| Uops | 0 - DV | 1 | 2 - D | 3 - D | 4 | 5 | |
---------------------------------------------------------------------
| 1 | 1.0 | | | | | | | cmp edi, 0x1
| 2 | | 1.0 | | | | 1.0 | CP | sbb eax, eax
The larger motivation is to clean up all select-of-constants combining/lowering
because we're missing some common cases.
llvm-svn: 306072
Summary:
These intrinsics aren't used by clang and haven't been for a while.
There's some really terrible codegen in the 32-bit target for avx512bw due to i64 not being legal. But as I said these intrinsics aren't used by clang even before this patch so this codegen reflects our clang behavior today.
Reviewers: spatel, RKSimon, zvi, igorb
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34389
llvm-svn: 306047
Our handling of select-of-constants is lumpy in IR (https://reviews.llvm.org/D24480),
lumpy in DAGCombiner, and lumpy in X86ISelLowering. That's why we only had the 'sbb'
codegen in 1 out of the 4 tests. This is a step towards smoothing that out.
First, show that all of these IR forms are equivalent:
http://rise4fun.com/Alive/mx
Second, show that the 'sbb' version is faster/smaller. IACA output for SandyBridge
(later Intel and AMD chips are similar based on Agner's tables):
This is the "obvious" x86 codegen (what gcc appears to produce currently):
| Num Of | Ports pressure in cycles | |
| Uops | 0 - DV | 1 | 2 - D | 3 - D | 4 | 5 | |
---------------------------------------------------------------------
| 1* | | | | | | | | xor eax, eax
| 1 | 1.0 | | | | | | CP | test edi, edi
| 1 | | | | | | 1.0 | CP | setnz al
| 1 | | 1.0 | | | | | CP | neg eax
This is the adc version:
| 1* | | | | | | | | xor eax, eax
| 1 | 1.0 | | | | | | CP | cmp edi, 0x1
| 2 | | 1.0 | | | | 1.0 | CP | adc eax, 0xffffffff
And this is sbb:
| 1 | 1.0 | | | | | | | neg edi
| 2 | | 1.0 | | | | 1.0 | CP | sbb eax, eax
If IACA is trustworthy, then sbb became a single uop in Broadwell, so this will be
clearly better than the alternatives going forward.
llvm-svn: 306040
Masked gather for vector length 2 is lowered incorrectly for element type i32.
The type <2 x i32> was automatically extended to <2 x i64> and we generated VPGATHERQQ instead of VPGATHERQD.
The type <2 x float> is extended to <4 x float>, so there is no bug for this type, but the sequence may be more optimal.
In this patch I'm fixing <2 x i32>bug and optimizing <2 x float> sequence for GATHERs only. The same fix should be done for Scatters as well.
Differential revision: https://reviews.llvm.org/D34343
llvm-svn: 305987
There are a couple of potential improvements as seen in the IR and asm:
1. We're unnecessarily extending to a larger type to compare values.
2. The codegen for (select cond, 1, -1) could avoid a cmov.
(or we could change the order of the compares, so we have a select with 0 operand)
llvm-svn: 305802
Target shuffle combining now supports the matching of INSERT_VECTOR_ELT/PINSRW/PINSRB for merging multiple insertions into shuffles/bitmasks.
llvm-svn: 305788
This seems to be interacting badly with ASan somehow, causing false reports of
heap-buffer overflows: PR33514.
> Summary:
> The patch makes instruction count the highest priority for
> LSR solution for X86 (previously registers had highest priority).
>
> Reviewers: qcolombet
>
> Differential Revision: http://reviews.llvm.org/D30562
>
> From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 305720
Summary: Implement some of the simplest addressing modes.It should help to test ABI.
Reviewers: zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33888
llvm-svn: 305691
Use llvm::make_unique to avoid ambiguity with MSVC.
This patch adds a generic MacroFusion pass, that is used on X86 and
AArch64, which both define target-specific shouldScheduleAdjacent
functions. This generic pass should make it easier for other targets to
implement macro fusion and I intend to add macro fusion for ARM shortly.
Differential Revision: https://reviews.llvm.org/D34144
llvm-svn: 305690
Summary:
This patch adds a generic MacroFusion pass, that is used on X86 and
AArch64, which both define target-specific shouldScheduleAdjacent
functions. This generic pass should make it easier for other targets to
implement macro fusion and I intend to add macro fusion for ARM shortly.
Reviewers: craig.topper, evandro, t.p.northover, atrick, MatzeB
Reviewed By: MatzeB
Subscribers: atrick, aemerson, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34144
llvm-svn: 305677
Eric Christopher