When inlining the declaration for llvm::DenseSet/DenseMap in the mlir
namespace from a forward declaration, clang does not take the default
for the template parameters if their are declared later.
namespace llvm {
template<typename Foo>
class DenseMap;
}
namespace mlir {
using llvm::DenseMap;
}
namespace llvm {
template<typename Foo = int>
class DenseMap {};
}
namespace mlir {
DenseMap<> map;
}
PiperOrigin-RevId: 261495612
This CL introduces a linalg.generic op to represent generic tensor contraction operations on views.
A linalg.generic operation requires a numbers of attributes that are sufficient to emit the computation in scalar form as well as compute the appropriate subviews to enable tiling and fusion.
These attributes are very similar to the attributes for existing operations such as linalg.matmul etc and existing operations can be implemented with the generic form.
In the future, most existing operations can be implemented using the generic form.
This CL starts by splitting out most of the functionality of the linalg::NInputsAndOutputs trait into a ViewTrait that queries the per-instance properties of the op. This allows using the attribute informations.
This exposes an ordering of verifiers issue where ViewTrait::verify uses attributes but the verifiers for those attributes have not been run. The desired behavior would be for the verifiers of the attributes specified in the builder to execute first but it is not the case atm. As a consequence, to emit proper error messages and avoid crashing, some of the
linalg.generic methods are defensive as such:
```
unsigned getNumInputs() {
// This is redundant with the `n_views` attribute verifier but ordering of verifiers
// may exhibit cases where we crash instead of emitting an error message.
if (!getAttr("n_views") || n_views().getValue().size() != 2)
return 0;
```
In pretty-printed form, the specific attributes required for linalg.generic are factored out in an independent dictionary named "_". When parsing its content is flattened and the "_name" is dropped. This allows using aliasing for reducing boilerplate at each linalg.generic invocation while benefiting from the Tablegen'd verifier form for each named attribute in the dictionary.
For instance, implementing linalg.matmul in terms of linalg.generic resembles:
```
func @mac(%a: f32, %b: f32, %c: f32) -> f32 {
%d = mulf %a, %b: f32
%e = addf %c, %d: f32
return %e: f32
}
#matmul_accesses = [
(m, n, k) -> (m, k),
(m, n, k) -> (k, n),
(m, n, k) -> (m, n)
]
#matmul_trait = {
doc = "C(m, n) += A(m, k) * B(k, n)",
fun = @mac,
indexing_maps = #matmul_accesses,
library_call = "linalg_matmul",
n_views = [2, 1],
n_loop_types = [2, 1, 0]
}
```
And can be used in multiple places as:
```
linalg.generic #matmul_trait %A, %B, %C [other-attributes] :
!linalg.view<?x?xf32>, !linalg.view<?x?xf32>, !linalg.view<?x?xf32>
```
In the future it would be great to have a mechanism to alias / register a new
linalg.op as a pair of linalg.generic, #trait.
Also, note that with one could theoretically only specify the `doc` string and parse all the attributes from it.
PiperOrigin-RevId: 261338740
Add StdIndexedValue to EDSC helper so that we can use it
to generated std.load and std.store in EDSC.
Closestensorflow/mlir#59
PiperOrigin-RevId: 261324965
AffineDataCopyGeneration pass relied on command line flags for internal logic
in several places, which makes it unusable in a library context (i.e. outside a
standalone mlir-opt binary that does the command line parsing). Define
configuration flags in the constructor instead, and set them up to command
line-based defaults to maintain the original behavior.
PiperOrigin-RevId: 261322364
This functionality was added recently and is intended to ensure that parametric
passes can be configured programmatically and not only from command-line flags,
which are mostly useless outside of standalone mlir-opt biary.
PiperOrigin-RevId: 261320932
This CL extends the existing spv.constant op to also support
specialization constant by adding an extra unit attribute
on it.
PiperOrigin-RevId: 261194869
verifyUnusedValue is a bit strange given that it is specified in a
result pattern but used to generate match statements. Now we are
able to support multi-result ops better, we can retire it and replace
it with a HasNoUseOf constraint. This reduces the number of mechanisms.
PiperOrigin-RevId: 261166863
We allow to generate more ops than what are needed for replacing
the matched root op. Only the last N static values generated are
used as replacement; the others serve as auxiliary ops/values for
building the replacement.
With the introduction of multi-result op support, an op, if used
as a whole, may be used to replace multiple static values of
the matched root op. We need to consider this when calculating
the result range an generated op is to replace.
For example, we can have the following pattern:
```tblgen
def : Pattern<(ThreeResultOp ...),
[(OneResultOp ...), (OneResultOp ...), (OneResultOp ...)]>;
// Two op to replace all three results
def : Pattern<(ThreeResultOp ...),
[(TwoResultOp ...), (OneResultOp ...)]>;
// One op to replace all three results
def : Pat<(ThreeResultOp ...), (ThreeResultOp ...)>;
def : Pattern<(ThreeResultOp ...),
[(AuxiliaryOp ...), (ThreeResultOp ...)]>;
```
PiperOrigin-RevId: 261017235
Previously we use one single method with lots of branches to
generate multiple builders. This makes the method difficult
to follow and modify. This CL splits the method into multiple
dedicated ones, by extracting common logic into helper methods
while leaving logic specific to each builder in their own
methods.
PiperOrigin-RevId: 261011082
During serialization, the operand number must be used to get the
values assocaited with an operand. Using the argument number in Op
specification was wrong since some of the elements in the arguments
list might be attributes on the operation. This resulted in a segfault
during serialization.
Add a test that exercise that path.
PiperOrigin-RevId: 260977758
Use of std::isupper and std::islower need <cctype> header file. Fix
that and also fix the header of a file to match the file name.
PiperOrigin-RevId: 260816852
Extend the recently introduced support for hexadecimal float literals to tensor
literals, which may also contain special floating point values such as
infinities and NaNs.
Modify TensorLiteralParser to store the list of tokens representing values
until the type is parsed instead of trying to guess the tensor element type
from the token kinds (hexadecimal values can be either integers or floats, and
can be mixed with both). Maintain the error reports as close as possible to
the existing implementation to avoid disturbing the tests. They can be
improved in a separate clean-up if deemed necessary.
PiperOrigin-RevId: 260794716
All non-argument attributes specified for an operation are treated as
decorations on the result value and (de)serialized using OpDecorate
instruction. An error is generated if an attribute is not an argument,
and the name doesn't correspond to a Decoration enum. Name of the
attributes that represent decoerations are to be the snake-case-ified
version of the Decoration name.
Add utility methods to convert to snake-case and camel-case.
PiperOrigin-RevId: 260792638
MLIR does not have support for parsing special floating point values such as
infinities and NaNs. If programmatically constructed, these values are printed
as NaN and (+-)Inf and cannot be parsed back. Add parser support for
hexadecimal literals in float attributes, following LLVM IR. The literal
corresponds to the in-memory representation of the floating point value.
IEEE 754 defines a range of possible values for NaNs, storing the bitwise
representation allows MLIR to properly roundtrip NaNs with different bit values
of significands.
The initial version of this commit was missing support for float literals that
used to be printed in decimal notation as a fallback, but ended up being
printed in hexadecimal format which became the fallback for special values.
The decimal fallback behavior was not exercised by tests. It is currently
reinstated and tested by the newly added test @f32_potential_precision_loss in
parser.mlir.
PiperOrigin-RevId: 260790900
Add a missed library that needs to be linked with mlir-opt. This
results in a test failure in the MLIR due to the pass
`-convert-gpu-to-spirv` not being found.
PiperOrigin-RevId: 260773067
This CL adds an initial implementation for translation of kernel
function in GPU Dialect (used with a gpu.launch_kernel) op to a
spv.Module. The original function is translated into an entry
function.
Most of the heavy lifting is done by adding TypeConversion and other
utility functions/classes that provide most of the functionality to
translate from Standard Dialect to SPIR-V Dialect. These are intended
to be reusable in implementation of different dialect conversion
pipelines.
Note : Some of the files for have been renamed to be consistent with
the norm used by the other Conversion frameworks.
PiperOrigin-RevId: 260759165
We are relying on serializer to construct positive cases to drive
the test for deserializer. This leaves negative cases untested.
This CL adds a basic test fixture for covering the negative
corner cases to enforce a more robust deserializer.
Refactored common SPIR-V building methods out of serializer to
share it with the deserialization test.
PiperOrigin-RevId: 260742733
RewriterGen was emitting invalid C++ code if the pattern required to create a
zero-result operation due to the absence of a special case that would avoid
generating a spurious comma. Handle this case. Also add rewriter tests for
zero-argument operations.
PiperOrigin-RevId: 260576998
The code was written with the assumption that on failure an error would be
issued by another verifier. However verification is stopping on the first
failure which lead to an empty output. Instead we make sure an error is
displayed.
Also add tests in the test dialect for this trait.
PiperOrigin-RevId: 260541290
Automatic generation of spirv::AccessChainOp (de)serialization needs
the (de)serialization emitters to handle argument specified as
Variadic<...>. To handle this correctly, this argument can only be
the last entry in the arguments list.
Add a test to (de)serialize spirv::AccessChainOp
PiperOrigin-RevId: 260532598
This CL adds a few specializations for sgemm.
A minor change to alpha is made in cblas_interface.cpp to be compatible with actual BLAS calls.
For now this is for internal testing purposes only.
PiperOrigin-RevId: 260129027
It's quite common that we want to put further constraints on the matched
multi-result op's specific results. This CL enables referencing symbols
bound to source op with the `__N` syntax.
PiperOrigin-RevId: 260122401
In the backward slice computation, BlockArgument coming from function arguments represent a natural boundary for the traversal and should not trigger llvm_unreachable.
This CL also improves the error message and adds a relevant test.
PiperOrigin-RevId: 260118630
This CL provides a fix that makes linal_matmul_impl compliant with the BLAS interface. Before this CL it would compute either C += A * B when called with cblas.cpp:cblas_sgemm implementation and C = A * B with other implementations.
PiperOrigin-RevId: 260117367
Clipping creates non-affine memory accesses, use std_load and std_store instead of affine_load and affine_store.
In the future we may also want a fill with the neutral element rather than clip, this would make the accesses affine if we wanted more analyses and transformations to happen post lowering to pointwise copies.
PiperOrigin-RevId: 260110503
This API is needed for the TFLite flatbuffer importer as the importer constructs
arrays of NamedAttributes based on the flatbuffer that need to be added to an
operation.
PiperOrigin-RevId: 260041403
AccessChainOp creates a pointer into a composite object that can be used with
OpLoad and OpStore.
Closestensorflow/mlir#52
PiperOrigin-RevId: 260035676
Function-like operations are likely to have similar custom syntax, in
particular they all need to print function signature with argument attributes.
Transform function printer and parser so that they can be applied to any
operation with the FunctionLike trait. Move them to the trait itself. To
avoid large member functions in the class template, define a concrete base
class for the trait and implement common functionality in it. This allows
printer and parser to be implemented in a source file without templating.
PiperOrigin-RevId: 260020893
MLIR does not have support for parsing special floating point values such as
infinities and NaNs. If programmatically constructed, these values are printed
as NaN and (+-)Inf and cannot be parsed back. Add parser support for
hexadecimal literals in float attributes, following LLVM IR. The literal
corresponds to the in-memory representation of the floating point value.
IEEE 754 defines a range of possible values for NaNs, storing the bitwise
representation allows MLIR to properly roundtrip NaNs with different bit values
of significands.
PiperOrigin-RevId: 260018802
This mode analyzes which operations are legalizable to the given target if a conversion were to be applied, i.e. no rewrites are ever performed even on success. This mode is useful for device partitioning or other utilities that may want to analyze the effect of conversion to different targets before performing it.
The analysis method currently just fills a provided set with the operations that were found to be legalizable. This can be extended in the future to capture more information as necessary.
PiperOrigin-RevId: 259987105
This CL fixes an oversight with dealing with loops in slicing analysis.
The forward slice computation properly propagates through loops but not the backward slice.
Add relevant unit tests.
PiperOrigin-RevId: 259903396
Mehdi Amini