Change PHINodes to store simple pointers to their incoming basic blocks,
instead of full-blown Uses.
Note that this loses an optimization in SplitCriticalEdge(), because we
can no longer walk the use list of a BasicBlock to find phi nodes. See
the comment I removed starting "However, the foreach loop is slow for
blocks with lots of predecessors".
Extend replaceAllUsesWith() on a BasicBlock to also update any phi
nodes in the block's successors. This mimics what would have happened
when PHINodes were proper Users of their incoming blocks. (Note that
this only works if OldBB->replaceAllUsesWith(NewBB) is called when
OldBB still has a terminator instruction, so it still has some
successors.)
llvm-svn: 133435
In cases such as the attached test, where the case value for a switch
destination is used in a phi node that follows the destination, it
might be better to replace that value with the condition value of the
switch, so that more blocks can be folded away with
TryToSimplifyUncondBranchFromEmptyBlock because there are less
conflicts in the phi node.
llvm-svn: 133344
intrinsics. In fact, we'll optimize a bitcast to that when possible. Detect it
when looking for the lifetime intrinsics.
No test case, noticed by inspection.
llvm-svn: 132906
pad, separating the exception and selector calls from the new lpad. Teaching
it not to do that, or to properly adjust the CFG afterwards, is out of
scope because it would require the other edges to the landing pad to be split
as well (effectively). Instead, just recover from the most likely cases
during inlining. The best long-term solution is to change the exception
representation and commit to either requiring or not requiring the more
complex edge-splitting logic; this is just a shorter-term hack.
llvm-svn: 132799
then we don't want to set the destination in the indirect branch to the
destination. This is because the indirect branch needs its destinations to have
had their block addresses taken. This isn't so of the new critical edge that's
split during this process. If it turns out that the destination block has only
one predecessor, and that being a BB with an indirect branch, then it won't be
marked as 'used' and may be removed.
PR10072
llvm-svn: 132638
transformed by the inliner into a branch to the enclosing landing pad
(when inlined through an invoke). If not so optimized, it is lowered
DWARF EH preparation into a call to _Unwind_Resume (or _Unwind_SjLj_Resume
as appropriate). Its chief advantage is that it takes both the
exception value and the selector value as arguments, meaning that there
is zero effort in recovering these; however, the frontend is required
to pass these down, which is not actually particularly difficult.
Also document the behavior of landing pads a bit better, and make it
clearer that it's okay that personality functions don't always land at
landing pads. This is just a fact of life. Don't write optimizations that
rely on pushing things over an unwind edge.
llvm-svn: 132253
- the selector for the landing pad must provide all available information
about the handlers, filters, and cleanups within that landing pad
- calls to _Unwind_Resume must be converted to branches to the enclosing
lpad so as to avoid re-entering the unwinder when the lpad claimed it
was going to handle the exception in some way
This is quite specific to libUnwind-based unwinding. In an effort to not
interfere too badly with other unwinders, and with existing hacks in frontends,
this only triggers on _Unwind_Resume (not _Unwind_Resume_or_Rethrow) and does
nothing with selectors if it cannot find a selector call for either lpad.
llvm-svn: 132200
I also changed -simplifycfg, -jump-threading and -codegenprepare to use this to produce slightly better code without any extra cleanup passes (AFAICT this was the only place in -simplifycfg where now-dead conditions of replaced terminators weren't being cleaned up). The only other user of this function is -sccp, but I didn't read that thoroughly enough to figure out whether it might be holding pointers to instructions that could be deleted by this.
llvm-svn: 131855
instruction around, reducing work.
Greatly simplify handling of debug instructions. There is no need to
build up a vector of them and then move them into the one predecessor
if we're processing a block. Instead just rescan the block and *copy*
them into the pred. If a block gets merged into multiple preds, this
will retain more debug info.
llvm-svn: 129502
after the given instruction; make sure to handle that case correctly.
(It's difficult to trigger; the included testcase involves a dead
block, but I don't think that's a requirement.)
While I'm here, get rid of the unnecessary warning about
SimplifyInstructionsInBlock, since it should work correctly as far as I know.
llvm-svn: 128782
reachable uses, but there still might be uses in dead blocks. Use the
standard solution of replacing all the uses with undef. This is
a rare case because it's very sensitive to phase ordering in SimplifyCFG.
llvm-svn: 127299
Yes, there are other types than i8* and GEPs on them can produce an add+multiply.
We don't consider that cheap enough to be speculatively executed.
llvm-svn: 126481
itself without going via a phi node then we could return false here in
spite of making a change. Also, tweak the comment because this method
can (and always could) return true without deleting the original phi node.
For example, if the phi node was used by a read-only invoke instruction
which is used by another phi node phi2 which is only used by and only uses
the invoke, then phi2 would be deleted but not the invoke instruction and
not the original phi node.
llvm-svn: 126129
should be that if the phi is used by a side-effect free instruction with
no uses then the phi and the instruction now get zapped (checked by the
unittest).
llvm-svn: 126124
test for that. With this change, test/CodeGen/X86/codegen-dce.ll no longer finds
any instructions to DCE, so delete the test.
Also renamed J and JP to I and IP in RecursivelyDeleteDeadPHINode.
llvm-svn: 126088
This is part of a futile attempt to not "break" bizzaro
code like this:
l1:
printf("l1: %p\n", &&l1);
++x;
if( x < 3 ) goto l1;
Previously we'd fold &&l1 to 1, which is fine per our semantics
but not helpful to the user.
llvm-svn: 125827
This makes the job of the later optzn passes easier, allowing the vast amount of
icmp transforms to chew on it.
We transform 840 switches in gcc.c, leading to a 16k byte shrink of the resulting
binary on i386-linux.
The testcase from README.txt now compiles into
decl %edi
cmpl $3, %edi
sbbl %eax, %eax
andl $1, %eax
ret
llvm-svn: 124724
checks enabled:
1) Use '<' to compare integers in a comparison function rather than '<='.
2) Use the uniqued set DefBlocks rather than Info.DefiningBlocks to initialize
the priority queue.
The speedup of scalarrepl on test-suite + SPEC2000 + SPEC2006 is a bit less, at
just under 16% rather than 17%.
llvm-svn: 123662
eliminating a potentially quadratic data structure, this also gives a 17%
speedup when running -scalarrepl on test-suite + SPEC2000 + SPEC2006. My initial
experiment gave a greater speedup around 25%, but I moved the dominator tree
level computation from dominator tree construction to PromoteMemToReg.
Since this approach to computing IDFs has a much lower overhead than the old
code using precomputed DFs, it is worth looking at using this new code for the
second scalarrepl pass as well.
llvm-svn: 123609
DT->changeImmediateDominator() trivially ignores identity updates, so there is
really no need for the uniqueing provided by SmallPtrSet.
I expect this to fix PR8954.
llvm-svn: 123286
phi nodes. It is called from MergeBlockIntoPredecessor which is
called from GVN, which claims to preserve these.
I'm skeptical that this is the actual problem behind PR8954, but
this is a stab in the right direction.
llvm-svn: 123222
they all ready do). This removes two dominator recomputations prior to isel,
which is a 1% improvement in total llc time for 403.gcc.
The only potentially suspect thing is making GCStrategy recompute dominators if
it used a custom lowering strategy.
llvm-svn: 123064
1. Take a flags argument instead of a bool. This makes
it more clear to the reader what it is used for.
2. Add a flag that says that "remapping a value not in the
map is ok".
3. Reimplement MapValue to share a bunch of code and be a lot
more efficient. For lookup failures, don't drop null values
into the map.
4. Using the new flag a bunch of code can vaporize in LinkModules
and LoopUnswitch, kill it.
No functionality change.
llvm-svn: 123058
in the PR, the pass could break LCSSA form when inserting preheaders. It probably
would be easy enough to fix this, but since currently we always go into LCSSA form
after running this pass, doing so is not urgent.
llvm-svn: 122695
visit instructions before their uses, since InstructionSimplify does a
better job in that case. All this prompted by Frits van Bommel.
llvm-svn: 122343
it could only be tested indirectly, via instcombine, gvn or some other
pass that makes use of InstructionSimplify, which means that testcases
had to be carefully contrived to dance around any other transformations
that that pass did.
llvm-svn: 122264
argument. The generated alloca has to have at least the alignment of the
byval, if not, the client may be making assumptions that the new alloca won't
satisfy.
llvm-svn: 122234
which is simpler than finding a place to insert in BB.
- Don't perform the 'if condition hoisting' xform on certain
i1 PHIs, as it interferes with switch formation.
This re-fixes "example 7", without breaking the world hopefully.
llvm-svn: 121764
first, it can kick in on blocks whose conditions have been
folded to a constant, even though one of the edges will be
trivially folded.
second, it doesn't clean up the "if diamond" that it just
eliminated away. This is a problem because other simplifycfg
xforms kick in depending on the order of block visitation,
causing pointless work.
llvm-svn: 121762
when simplifying, allowing them to be eagerly turned into switches. This
is the last step required to get "Example 7" from this blog post:
http://blog.regehr.org/archives/320
On X86, we now generate this machine code, which (to my eye) seems better
than the ICC generated code:
_crud: ## @crud
## BB#0: ## %entry
cmpb $33, %dil
jb LBB0_4
## BB#1: ## %switch.early.test
addb $-34, %dil
cmpb $58, %dil
ja LBB0_3
## BB#2: ## %switch.early.test
movzbl %dil, %eax
movabsq $288230376537592865, %rcx ## imm = 0x400000017001421
btq %rax, %rcx
jb LBB0_4
LBB0_3: ## %lor.rhs
xorl %eax, %eax
ret
LBB0_4: ## %lor.end
movl $1, %eax
ret
llvm-svn: 121690
location in simplifycfg. In the old days, SimplifyCFG was never run on
the entry block, so we had to scan over all preds of the BB passed into
simplifycfg to do this xform, now we can just check blocks ending with
a condbranch. This avoids a scan over all preds of every simplified
block, which should be a significant compile-time perf win on functions
with lots of edges. No functionality change.
llvm-svn: 121668
preserves LCSSA form out of ScalarEvolution and into the LoopInfo
class. Use it to check that SimplifyInstruction simplifications
are not breaking LCSSA form. Fixes PR8622.
llvm-svn: 119727
hasConstantValue. I was leery of using SimplifyInstruction
while the IR was still in a half-baked state, which is the
reason for delaying the simplification until the IR is fully
cooked.
llvm-svn: 119494
it isn't unreachable and should not be zapped. The check for the entry block
was missing in one case: a block containing a unwind instruction. While there,
do some small cleanups: "M" is not a great name for a Function* (it would be
more appropriate for a Module*), change it to "Fn"; use Fn in more places.
llvm-svn: 117224
must be called in the pass's constructor. This function uses static dependency declarations to recursively initialize
the pass's dependencies.
Clients that only create passes through the createFooPass() APIs will require no changes. Clients that want to use the
CommandLine options for passes will need to manually call the appropriate initialization functions in PassInitialization.h
before parsing commandline arguments.
I have tested this with all standard configurations of clang and llvm-gcc on Darwin. It is possible that there are problems
with the static dependencies that will only be visible with non-standard options. If you encounter any crash in pass
registration/creation, please send the testcase to me directly.
llvm-svn: 116820
perform initialization without static constructors AND without explicit initialization
by the client. For the moment, passes are required to initialize both their
(potential) dependencies and any passes they preserve. I hope to be able to relax
the latter requirement in the future.
llvm-svn: 116334
Chad Rosier