Previous btf field relocation is always at assignment like
r1 = 4
which is converted from an ld_imm64 instruction.
This patch did an optimization such that relocation
instruction might be load/store/shift. Specically, the
following insns may also have relocation, except BPF_MOV:
LDB, LDH, LDW, LDD, STB, STH, STW, STD,
LDB32, LDH32, LDW32, STB32, STH32, STW32,
SLL, SRL, SRA
To accomplish this, a few BPF target specific
codegen only instructions are invented. They
are generated at backend BPF SimplifyPatchable phase,
which is at early llc phase when SSA form is available.
The new codegen only instructions will be converted to
real proper instructions at the codegen and BTF emission stage.
Note that, as revealed by a few tests, this optimization might
be actual generating more relocations:
Scenario 1:
if (...) {
... __builtin_preserve_field_info(arg->b2, 0) ...
} else {
... __builtin_preserve_field_info(arg->b2, 0) ...
}
Compiler could do CSE to only have one relocation. But if both
of the above is translated into codegen internal instructions,
the compiler will not be able to do that.
Scenario 2:
offset = ... __builtin_preserve_field_info(arg->b2, 0) ...
...
... offset ...
... offset ...
... offset ...
For whatever reason, the compiler might be temporarily do copy
propagation of the righthand of "offset" assignment like
... __builtin_preserve_field_info(arg->b2, 0) ...
... __builtin_preserve_field_info(arg->b2, 0) ...
and CSE will be able to deduplicate later.
But if these intrinsics are converted to BPF pseudo instructions,
they will not be able to get deduplicated.
I do not expect we have big instruction count difference.
It may actually reduce instruction count since now relocation
is in deeper insn dependency chain.
For example, for test offset-reloc-fieldinfo-2.ll, this patch
generates 7 instead of 6 relocations for non-alu32 mode, but it
actually reduced instruction count from 29 to 26.
Differential Revision: https://reviews.llvm.org/D71790
Currently, for indirect call, the assembly code printed out as
callx <imm>
This is not right, it should be
callx <reg>
Fixed the issue with proper format.
Differential Revision: https://reviews.llvm.org/D69229
llvm-svn: 375386
Support sub-register code-gen for XADD is like supporting any other Load
and Store patterns.
No new instruction is introduced.
lock *(u32 *)(r1 + 0) += w2
has exactly the same underlying insn as:
lock *(u32 *)(r1 + 0) += r2
BPF_W width modifier has guaranteed they behave the same at runtime. This
patch merely teaches BPF back-end that BPF_W width modifier could work
GPR32 register class and that's all needed for sub-register code-gen
support for XADD.
test/CodeGen/BPF/xadd.ll updated to include sub-register code-gen tests.
A new testcase test/CodeGen/BPF/xadd_legal.ll is added to make sure the
legal case could pass on all code-gen modes. It could also test dead Def
check on GPR32. If there is no proper handling like what has been done
inside BPFMIChecking.cpp:hasLivingDefs, then this testcase will fail.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 355126
JMP32 instructions has been added to eBPF ISA. They are 32-bit variants of
existing BPF conditional jump instructions, but the comparison happens on
low 32-bit sub-register only, therefore some unnecessary extensions could
be saved.
JMP32 instructions will only be available for -mcpu=v3. Host probe hook has
been updated accordingly.
JMP32 instructions will only be enabled in code-gen when -mattr=+alu32
enabled, meaning compiling the program using sub-register mode.
For JMP32 encoding, it is a new instruction class, and is using the
reserved eBPF class number 0x6.
This patch has been tested by compiling and running kernel bpf selftests
with JMP32 enabled.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 353384
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Some BPF JIT backends would want to optimize memcpy in their own
architecture specific way.
However, at the moment, there is no way for JIT backends to see memcpy
semantics in a reliable way. This is due to LLVM BPF backend is expanding
memcpy into load/store sequences and could possibly schedule them apart from
each other further. So, BPF JIT backends inside kernel can't reliably
recognize memcpy semantics by peephole BPF sequence.
This patch introduce new intrinsic expand infrastructure to memcpy.
To get stable in-order load/store sequence from memcpy, we first lower
memcpy into BPF::MEMCPY node which then expanded into in-order load/store
sequences in expandPostRAPseudo pass which will happen after instruction
scheduling. By this way, kernel JIT backends could reliably recognize
memcpy through scanning BPF sequence.
This new memcpy expand infrastructure is gated by a new option:
-bpf-expand-memcpy-in-order
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 337977
The instruction mapping between eBPF/arm64/x86_64 are:
eBPF arm64 x86_64
LD1 BPF_LDX | BPF_B ldrb movzbl
LD2 BPF_LDX | BPF_H ldrh movzwl
LD4 BPF_LDX | BPF_W ldr movl
movzbl/movzwl/movl on x86_64 accept 32-bit sub-register, for example %eax,
the same for ldrb/ldrh on arm64 which accept 32-bit "w" register. And
actually these instructions only accept sub-registers. There is no point
to have LD1/2/4 (unsigned) for 64-bit register, because on these arches,
upper 32-bits are guaranteed to be zeroed by hardware or VM, so load into
the smallest available register class is the best choice for maintaining
type information.
For eBPF we should adopt the same philosophy, to change current
format (A):
r = *(u8 *) (r + off) // BPF_LDX | BPF_B
r = *(u16 *)(r + off) // BPF_LDX | BPF_H
r = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = r // BPF_STX | BPF_B
*(u16 *)(r + off) = r // BPF_STX | BPF_H
*(u32 *)(r + off) = r // BPF_STX | BPF_W
into B:
w = *(u8 *) (r + off) // BPF_LDX | BPF_B
w = *(u16 *)(r + off) // BPF_LDX | BPF_H
w = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = w // BPF_STX | BPF_B
*(u16 *)(r + off) = w // BPF_STX | BPF_H
*(u32 *)(r + off) = w // BPF_STX | BPF_W
There is no change on encoding nor how should they be interpreted,
everything is as it is, load the specified length, write into low bits of
the register then zeroing all remaining high bits.
The only change is their associated register class and how compiler view
them.
Format A still need to be kept, because eBPF LLVM backend doesn't support
sub-registers at default, but once 32-bit subregister is enabled, it should
use format B.
This patch implemented this together with all those necessary extended load
and truncated store patterns.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325987
We need to support condition comparison on i32. All these comparisons are
supposed to be combined into BPF_J* instructions which only support i64.
For ISD::BR_CC we need to promote it to i64 first, then do custom lowering.
For ISD::SET_CC, just expand to SELECT_CC like what's been done for i64.
For ISD::SELECT_CC, we also want to do custom lower for i32. However, after
32-bit subregister support enabled, it is possible the comparison operands
are i32 while the selected value are i64, or the comparison operands are
i64 while the selected value are i32. We need to define extra instruction
pattern and support them in custom instruction inserter.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325985
For transformations between i32 and i64, if it is explicit signed extension:
- first cast the operand to i64
- then use SLL + SRA to finish the extension.
if it is explicit zero extension:
- first cast the operand to i64
- then use SLL + SRL to finish the extension.
if it is explicit any extension:
- just refer to 64-bit register.
if it is explicit truncation:
- just refer to 32-bit subregister.
NOTE: Some of the zero extension sequences might be unnecessary, they will be
removed by an peephole pass on MachineInstruction layer.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325981
These 32-bit ALU insn patterns which takes immediate as one operand were
initially added to enable AsmParser support, and the AsmMatcher uses "ins"
and "outs" fields to deduct the operand constraint.
However, the instruction selector doesn't work the same as AsmMatcher. The
selector will use the "pattern" field for which we are not setting the
predication for immediate operands correctly.
Without this patch, i32 would eventually means all i32 operands are valid,
both imm and gpr, while these patterns should allow imm only.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325980
These pseudos are not supposed to be visible to user.
This patch reduced the auto-generated instruction matcher. For example,
the following words are removed from keyword list of LLVM BPF assembler.
- MCK__35_, // '#'
- MCK__COLON_, // ':'
- MCK__63_, // '?'
- MCK_ADJCALLSTACKDOWN, // 'ADJCALLSTACKDOWN'
- MCK_ADJCALLSTACKUP, // 'ADJCALLSTACKUP'
- MCK_PSEUDO, // 'PSEUDO'
- MCK_Select, // 'Select'
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 322535
kernel verifier is becoming smarter and soon will support
direct and indirect function calls.
Remove obsolete error from BPF backend.
Make call to use PCRel_4 fixup.
'bpf to bpf' calls are distinguished from 'bpf to kernel' calls
by insn->src_reg == BPF_PSEUDO_CALL == 1 which is used as relocation
indicator similar to ld_imm64->src_reg == BPF_PSEUDO_MAP_FD == 1
The actual 'call' instruction remains the same for both
'bpf to kernel' and 'bpf to bpf' calls.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318614
We came across an llvm bug when compiling some testcases that 64-bit
immediates are silently truncated into 32-bit and then packed into
BPF_JMP | BPF_K encoding. This caused comparison with wrong value.
This bug looks to be introduced by r308080. The Select_Ri pattern is
supposed to be lowered into J*_Ri while the latter only support 32-bit
immediate encoding, therefore Select_Ri should have similar immediate
predicate check as what J*_Ri are doing.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 315889
This patch adds new insn, "reg = be16/be32/be64 reg",
for bswap to little endian for big-endian target (bpfeb).
It also adds new insn for negation "reg = -reg".
Currently, for source code, e.g.,
b = -a
LLVM still prefers to generate:
b = 0 - a
But "reg = -reg" format can be used in assembly code.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 314376
This patch adds instruction patterns for operations in BPF_ALU. After this,
assembler could recognize some 32-bit ALU statement. For example, those listed
int the unit test file.
Separate MOV patterns are unnecessary as MOV is ALU operation that could reuse
ALU encoding infrastructure, this patch removed those redundant patterns.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 313961
Arithmetic and jump instructions, load and store instructions are sharing
the same 8-bit code field encoding,
A better instruction pattern implemention could be the following inheritance
relationships, and each layer only encoding those fields which start to
diverse from that layer. This avoids some redundant code.
InstBPF -> TYPE_ALU_JMP -> ALU/JMP
InstBPF -> TYPE_LD_ST -> Load/Store
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 313959
Currently, eBPF backend is using some constant directly in instruction patterns,
This patch replace them with mnemonics and removed some unnecessary temparary
variables.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 313958
This partially revert previous fix in commit f5858045aa0b
("bpf: proper print imm64 expression in inst printer").
In that commit, the original suffix "ll" is removed from
LD_IMM64 asmstring. In the customer print method, the "ll"
suffix is printed if the rhs is an immediate. For example,
"r2 = 5ll" => "r2 = 5ll", and "r3 = varll" => "r3 = var".
This has an issue though for assembler. Since assembler
relies on asmstring to do pattern matching, it will not
be able to distiguish between "mov r2, 5" and
"ld_imm64 r2, 5" since both asmstring is "r2 = 5".
In such cases, the assembler uses 64bit load for all
"r = <val>" asm insts.
This patch adds back " ll" suffix for ld_imm64 with one
additional space for "#reg = #global_var" case.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 312978
Fixed an issue in printImm64Operand where if the value is
an expression, print out the expression properly. Currently,
it will print
r1 = <MCOperand Expr:(tx_port)>ll
With the patch, the printout will be
r1 = tx_port
Suggested-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 312833
-mcpu=# will support:
. generic: the default insn set
. v1: insn set version 1, the same as generic
. v2: insn set version 2, version 1 + additional jmp insns
. probe: the compiler will probe the underlying kernel to
decide proper version of insn set.
We did not not use -mcpu=native since llc/llvm will interpret -mcpu=native
as the underlying hardware architecture regardless of -march value.
Currently, only x86_64 supports -mcpu=probe. Other architecture will
silently revert to "generic".
Also added -mcpu=help to print available cpu parameters.
llvm will print out the information only if there are at least one
cpu and at least one feature. Add an unused dummy feature to
enable the printout.
Examples for usage:
$ llc -march=bpf -mcpu=v1 -filetype=asm t.ll
$ llc -march=bpf -mcpu=v2 -filetype=asm t.ll
$ llc -march=bpf -mcpu=generic -filetype=asm t.ll
$ llc -march=bpf -mcpu=probe -filetype=asm t.ll
$ llc -march=bpf -mcpu=v3 -filetype=asm t.ll
'v3' is not a recognized processor for this target (ignoring processor)
...
$ llc -march=bpf -mcpu=help -filetype=asm t.ll
Available CPUs for this target:
generic - Select the generic processor.
probe - Select the probe processor.
v1 - Select the v1 processor.
v2 - Select the v2 processor.
Available features for this target:
dummy - unused feature.
Use +feature to enable a feature, or -feature to disable it.
For example, llc -mcpu=mycpu -mattr=+feature1,-feature2
...
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 311522
Currently, for code like below,
===
inner_map = bpf_map_lookup_elem(outer_map, &port_key);
if (!inner_map) {
inner_map = &fallback_map;
}
===
the compiler generates (pseudo) code like the below:
===
I1: r1 = bpf_map_lookup_elem(outer_map, &port_key);
I2: r2 = 0
I3: if (r1 == r2)
I4: r6 = &fallback_map
I5: ...
===
During kernel verification process, After I1, r1 holds a state
map_ptr_or_null. If I3 condition is not taken
(path [I1, I2, I3, I5]), supposedly r1 should become map_ptr.
Unfortunately, kernel does not recognize this pattern
and r1 remains map_ptr_or_null at insn I5. This will cause
verificaiton failure later on.
Kernel, however, is able to recognize pattern "if (r1 == 0)"
properly and give a map_ptr state to r1 in the above case.
LLVM here generates suboptimal code which causes kernel verification
failure. This patch fixes the issue by changing BPF insn pattern
matching and lowering to generate proper codes if the righthand
parameter of the above condition is a constant. A test case
is also added.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 308080
o This is discovered during my study of 32-bit subregister
support.
o This is no impact on current functionality since we
only support 64-bit registers.
o Searching the web, looks like the issue has been discovered
before, so fix it now.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 305559
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Emit error when BPF backend sees a call to a global function or to an external symbol.
The kernel verifier only allows calls to predefined helpers from bpf.h
which are defined in 'enum bpf_func_id'. Such calls in assembler must
look like 'call [1-9]+' where number matches bpf_func_id.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 292204
add BPF disassembler, so tools like llvm-objdump can be used:
$ llvm-objdump -d -no-show-raw-insn ./sockex1_kern.o
./sockex1_kern.o: file format ELF64-BPF
Disassembly of section socket1:
bpf_prog1:
0: r6 = r1
8: r0 = *(u8 *)skb[23]
10: *(u32 *)(r10 - 4) = r0
18: r1 = *(u32 *)(r6 + 4)
20: if r1 != 4 goto 8
28: r2 = r10
30: r2 += -4
ld_imm64 (the only 16-byte insn) and special ld_abs/ld_ind instructions
had to be treated in a special way. The decoders for the rest of the insns
are automatically generated.
Add tests to cover new functionality.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287477
since bpf instruction set was introduced people learned to
read and understand kernel verifier output whereas llvm asm
output stayed obscure and unknown. Convert llvm to emit
assembler text similar to kernel to avoid this discrepancy
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287300
For the program like below
struct key_t {
int pid;
char name[16];
};
extern void test1(char *);
int test() {
struct key_t key = {};
test1(key.name);
return 0;
}
For key.name, the llc/bpf may generate the below code:
R1 = R10 // R10 is the frame pointer
R1 += -24 // framepointer adjustment
R1 |= 4 // R1 is then used as the first parameter of test1
OR operation is not recognized by in-kernel verifier.
This patch introduces an intermediate FI_ri instruction and
generates the following code that can be properly verified:
R1 = R10
R1 += -20
Patch by Yonghong Song <yhs@plumgrid.com>
llvm-svn: 249371
Expose bpf pseudo load instruction via intrinsic. It is used by front-ends that
can encode file descriptors directly into IR instead of relying on relocations.
llvm-svn: 233396
Summary:
V8->V9:
- cleanup tests
V7->V8:
- addressed feedback from David:
- switched to range-based 'for' loops
- fixed formatting of tests
V6->V7:
- rebased and adjusted AsmPrinter args
- CamelCased .td, fixed formatting, cleaned up names, removed unused patterns
- diffstat: 3 files changed, 203 insertions(+), 227 deletions(-)
V5->V6:
- addressed feedback from Chandler:
- reinstated full verbose standard banner in all files
- fixed variables that were not in CamelCase
- fixed names of #ifdef in header files
- removed redundant braces in if/else chains with single statements
- fixed comments
- removed trailing empty line
- dropped debug annotations from tests
- diffstat of these changes:
46 files changed, 456 insertions(+), 469 deletions(-)
V4->V5:
- fix setLoadExtAction() interface
- clang-formated all where it made sense
V3->V4:
- added CODE_OWNERS entry for BPF backend
V2->V3:
- fix metadata in tests
V1->V2:
- addressed feedback from Tom and Matt
- removed top level change to configure (now everything via 'experimental-backend')
- reworked error reporting via DiagnosticInfo (similar to R600)
- added few more tests
- added cmake build
- added Triple::bpf
- tested on linux and darwin
V1 cover letter:
---------------------
recently linux gained "universal in-kernel virtual machine" which is called
eBPF or extended BPF. The name comes from "Berkeley Packet Filter", since
new instruction set is based on it.
This patch adds a new backend that emits extended BPF instruction set.
The concept and development are covered by the following articles:
http://lwn.net/Articles/599755/http://lwn.net/Articles/575531/http://lwn.net/Articles/603983/http://lwn.net/Articles/606089/http://lwn.net/Articles/612878/
One of use cases: dtrace/systemtap alternative.
bpf syscall manpage:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b4fc1a460f3017e958e6a8ea560ea0afd91bf6fe
instruction set description and differences vs classic BPF:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/filter.txt
Short summary of instruction set:
- 64-bit registers
R0 - return value from in-kernel function, and exit value for BPF program
R1 - R5 - arguments from BPF program to in-kernel function
R6 - R9 - callee saved registers that in-kernel function will preserve
R10 - read-only frame pointer to access stack
- two-operand instructions like +, -, *, mov, load/store
- implicit prologue/epilogue (invisible stack pointer)
- no floating point, no simd
Short history of extended BPF in kernel:
interpreter in 3.15, x64 JIT in 3.16, arm64 JIT, verifier, bpf syscall in 3.18, more to come in the future.
It's a very small and simple backend.
There is no support for global variables, arbitrary function calls, floating point, varargs,
exceptions, indirect jumps, arbitrary pointer arithmetic, alloca, etc.
From C front-end point of view it's very restricted. It's done on purpose, since kernel
rejects all programs that it cannot prove safe. It rejects programs with loops
and with memory accesses via arbitrary pointers. When kernel accepts the program it is
guaranteed that program will terminate and will not crash the kernel.
This patch implements all 'must have' bits. There are several things on TODO list,
so this is not the end of development.
Most of the code is a boiler plate code, copy-pasted from other backends.
Only odd things are lack or < and <= instructions, specialized load_byte intrinsics
and 'compare and goto' as single instruction.
Current instruction set is fixed, but more instructions can be added in the future.
Signed-off-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Subscribers: majnemer, chandlerc, echristo, joerg, pete, rengolin, kristof.beyls, arsenm, t.p.northover, tstellarAMD, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D6494
llvm-svn: 227008
Yonghong Song