This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This adjusts header file includes for headers and source files
in Core. In doing so, one dependency cycle is eliminated
because all the includes from Core to that project were dead
includes anyway. In places where some files in other projects
were only compiling due to a transitive include from another
header, fixups have been made so that those files also include
the header they need. Tested on Windows and Linux, and plan
to address failures on OSX and FreeBSD after watching the
bots.
llvm-svn: 299714
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
This was a bit tricky, especially for things like
OptionValueArray and OptionValueDictionary since they do some
funky string parsing. Rather than try to re-write line-by-line
I tried to make the StringRef usage idiomatic, even though
it meant often re-writing from scratch large blocks of code
in a different way while keeping true to the original intent.
The finished code is a big improvement though, and often much
shorter than the original code. All tests and unit tests
pass on Windows and Linux.
llvm-svn: 287242
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This feature was added to solve a lookup problem in expressions when local variables
shadow ivars. That solution requires fully realizing all local variables to evaluate
any expression, and can cause significant performance problems when evaluating
expressions in frames that have many complex locals.
Until we get a better solution, this setting mitigates the problem when you don't
have local variables that shadow ivars.
<rdar://problem/27226122>
llvm-svn: 274783
settings or raise no error if not found.
From time to time it is useful to add some setting to work around or enable
a transitory feature. We've been reluctant to remove them later because then
we will break folks .lldbinit files. With this change you can add an "experimental"
node to the settings. If you later decide you want to keep the option, just move
it to the level that contained the "experimental" setting and it will still be
found. Or just remove it - setting it will then silently fail and won't halt
the .lldbinit file execution.
llvm-svn: 274593
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
plugin
dynamic-loader
macosx-kernel
(bool) disable-kext-loading
To settings can be set using:
(lldb) settings set plugin.dynamic-loader.macosx-kernel.disable-kext-loading true
I currently only hooked up the DynamicLoader plug-ins, but the code is very easy to duplicate when and if we need settings for other plug-ins.
llvm-svn: 166294
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads
Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".
llvm-svn: 162366
frames might go away (the object itself, not the actual logical frame) when
we are single stepping due to the way we currently sometimes end up flushing
frames when stepping in/out/over. They later will come back to life
represented by another object yet they have the same StackID. Now when you get
a lldb::SBFrame object, it will track the frame it is initialized with until
the thread goes away or the StackID no longer exists in the stack for the
thread it was created on. It uses a weak_ptr to both the frame and thread and
also stores the StackID. These three items allow us to determine when the
stack frame object has gone away (the weak_ptr will be NULL) and allows us to
find the correct frame again. In our test suite we had such cases where we
were just getting lucky when something like this happened:
1 - stop at breakpoint
2 - get first frame in thread where we stopped
3 - run an expression that causes the program to JIT and run code
4 - run more expressions on the frame from step 2 which was very very luckily
still around inside a shared pointer, yet, not part of the current
thread (a new stack frame object had appeared with the same stack ID and
depth).
We now avoid all such issues and properly keep up to date, or we start
returning errors when the frame doesn't exist and always responds with
invalid answers.
Also fixed the UserSettingsController (not going to rewrite this just yet)
so that it doesn't crash on shutdown. Using weak_ptr's came in real handy to
track when the master controller has already gone away and this allowed me to
pull out the previous NotifyOwnerIsShuttingDown() patch as it is no longer
needed.
llvm-svn: 149231
Fix a bug where "settings set -r th" wouldn't complete.
o UserSettingsController.cpp:
Fix a bug where "settings set target.process." wouldn't complete.
o test/functionalities/completion:
Add various completion test cases related to 'settings set' command.
llvm-svn: 148596
lldb_private::Error objects the rules are:
- short strings that don't start with a capitol letter unless the name is a
class or anything else that is always capitolized
- no trailing newline character
- should be one line if possible
Implemented a first pass at adding "--gdb-format" support to anything that
accepts format with optional size/count.
llvm-svn: 142999
Fixed up DWARFDebugAranges to use the new range classes.
Fixed the enumeration parsing to take a lldb_private::Error to avoid a lot of duplicated code. Now when an invalid enumeration is supplied, an error will be returned and that error will contain a list of the valid enumeration values.
llvm-svn: 141382
stdarg formats to use __attribute__ format so the compiler can flag
incorrect uses. Fix all incorrect uses. Most of these are innocuous,
a few were resulting in crashes.
llvm-svn: 140185
__attribute__ format so the compiler knows that this method takes
printf style formatter arguments and checks that it's being used
correctly. Fix a couple dozen incorrect SetErrorStringWithFormat()
calls throughout the sources.
llvm-svn: 140115
inline contexts when the deepest most block is not inlined.
Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.
Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.
Added the ability to get more than one address range from a SymbolContext
class for the case where a block or function has discontiguous address ranges.
llvm-svn: 130044
set by default when dumping registers. If you want to see all of the register
sets you can use the "--all" option:
(lldb) register read --all
If you want to just see some register sets, you can currently specify them
by index:
(lldb) register read --set 0 --set 2
We need to get shorter register set names soon so we can specify the register
sets by name without having to type too much. I will make this change soon.
You can also have any integer encoded registers resolve the address values
back to any code or data from the object files using the "--lookup" option.
Below is sample output when stopped in the libc function "puts" with some
const strings in registers:
Process 8973 stopped
* thread #1: tid = 0x2c03, 0x00007fff828fa30f libSystem.B.dylib`puts + 1, stop reason = instruction step into
frame #0: 0x00007fff828fa30f libSystem.B.dylib`puts + 1
(lldb) register read --lookup
General Purpose Registers:
rax = 0x0000000100000e98 "----------------------------------------------------------------------"
rbx = 0x0000000000000000
rcx = 0x0000000000000001
rdx = 0x0000000000000000
rdi = 0x0000000100000e98 "----------------------------------------------------------------------"
rsi = 0x0000000100800000
rbp = 0x00007fff5fbff710
rsp = 0x00007fff5fbff280
r8 = 0x0000000000000040
r9 = 0x0000000000000000
r10 = 0x0000000000000000
r11 = 0x0000000000000246
r12 = 0x0000000000000000
r13 = 0x0000000000000000
r14 = 0x0000000000000000
r15 = 0x0000000000000000
rip = 0x00007fff828fa30f libSystem.B.dylib`puts + 1
rflags = 0x0000000000000246
cs = 0x0000000000000027
fs = 0x0000000000000000
gs = 0x0000000000000000
As we can see, we see two constant strings and the PC (register "rip") is
showing the code it resolves to.
I fixed the register "--format" option to work as expected.
Added a setting to disable skipping the function prologue when setting
breakpoints as a target settings variable:
(lldb) settings set target.skip-prologue false
Updated the user settings controller boolean value handler funciton to be able
to take the default value so it can correctly respond to the eVarSetOperationClear
operation.
Did some usability work on the OptionValue classes.
Fixed the "image lookup" command to correctly respond to the "--verbose"
option and display the detailed symbol context information when looking up
line table entries and functions by name. This previously was only working
for address lookups.
llvm-svn: 129977
places that were dumping values for the settings. Centralized all of the
value dumping into a single place. When dumping values that aren't strings
we no longer surround the value with single quotes. When dumping values that
are strings, surround the string value with double quotes. When dumping array
values, assume they are always string values, and don't put quotes around
dictionary values.
llvm-svn: 129826
a Stream, and then added GetOutputData & GetErrorData to get the accumulated data.
- Added a StreamTee that will tee output to two provided lldb::StreamSP's.
- Made the CommandObjectReturn use this so you can Tee the results immediately to
the debuggers output file, as well as saving up the results to return when the command
is done executing.
- HandleCommands now uses this so that if you have a set of commands that continue the target
you will see the commands come out as they are processed.
- The Driver now uses this to output the command results as you go, which makes the interface
more reactive seeming.
llvm-svn: 126015
Targets can now specify some additional parameters for when we debug
executables that can help with plug-in selection:
target.execution-level = auto | user | kernel
target.execution-mode = auto | dynamic | static
target.execution-os-type = auto | none | halted | live
On some systems, the binaries that are created are the same wether you use
them to debug a kernel, or a user space program. Many times inspecting an
object file can reveal what an executable should be. For these cases we can
now be a little more complete by specifying wether to detect all of these
things automatically (inspect the main executable file and select a plug-in
accordingly), or manually to force the selection of certain plug-ins.
To do this we now allow the specficifation of wether one is debugging a user
space program (target.execution-level = user) or a kernel program
(target.execution-level = kernel).
We can also specify if we want to debug a program where shared libraries
are dynamically loaded using a DynamicLoader plug-in
(target.execution-mode = dynamic), or wether we will treat all symbol files
as already linked at the correct address (target.execution-mode = static).
We can also specify if the inferior we are debugging is being debugged on
a bare board (target.execution-os-type = none), or debugging an OS where
we have a JTAG or other direct connection to the inferior stops the entire
OS (target.execution-os-type = halted), or if we are debugging a program on
something that has live debug services (target.execution-os-type = live).
For the "target.execution-os-type = halted" mode, we will need to create
ProcessHelper plug-ins that allow us to extract the process/thread and other
OS information by reading/writing memory.
This should allow LLDB to be used for a wide variety of debugging tasks and
handle them all correctly.
llvm-svn: 125815
takes separate file handles for stdin, stdout, and stder and also allows for
the working directory to be specified.
Added support to "process launch" to a new option: --working-dir=PATH. We
can now set the working directory. If this is not set, it defaults to that
of the process that has LLDB loaded. Added the working directory to the
host LaunchInNewTerminal function to allows the current working directory
to be set in processes that are spawned in their own terminal. Also hooked this
up to the lldb_private::Process and all mac plug-ins. The linux plug-in had its
API changed, but nothing is making use of it yet. Modfied "debugserver" and
"darwin-debug" to also handle the current working directory options and modified
the code in LLDB that spawns these tools to pass the info along.
Fixed ProcessGDBRemote to properly pass along all file handles for stdin, stdout
and stderr.
After clearing the default values for the stdin/out/err file handles for
process to be NULL, we had a crasher in UserSettingsController::UpdateStringVariable
which is now fixed. Also fixed the setting of boolean values to be able to
be set as "true", "yes", "on", "1" for true (case insensitive) and "false", "no",
"off", or "0" for false.
Fixed debugserver to properly handle files for STDIN, STDOUT and STDERR that are not
already opened. Previous to this fix debugserver would only correctly open and dupe
file handles for the slave side of a pseudo terminal. It now correctly handles
getting STDIN for the inferior from a file, and spitting STDOUT and STDERR out to
files. Also made sure the file handles were correctly opened with the NOCTTY flag
for terminals.
llvm-svn: 124060
a shell would interpret it. A few examples that we now handle correctly
INPUT: "Hello "world
OUTPUT: "Hello World"
INPUT: "Hello "' World'
OUTPUT: "Hello World"
INPUT: Hello" World"
OUTPUT: "Hello World"
This broke the setting of dictionary values for the "settings set" command
for things like:
(lldb) settings set target.process.env-vars ["MY_ENV_VAR"]=YES
since we would drop the quotes. I fixed the user settings controller to use
a regular expression so it can accept any of the following inputs for
dictionary setting:
settings set target.process.env-vars ["MY_ENV_VAR"]=YES
settings set target.process.env-vars [MY_ENV_VAR]=YES
settings set target.process.env-vars MY_ENV_VAR=YES
We might want to eventually drop the first two syntaxes, but I won't make
that decision right now.
This allows more natural setting of the envirorment variables:
settings set target.process.env-vars MY_ENV_VAR=YES ABC=DEF CWD=/tmp
llvm-svn: 122166
- Added new utility function to Arg, GetQuotedCommandString, which re-assembles
the args into a string, replacing quotes that were originally there.
- Modified user settings stuff to always show individual elements when printing out
arrays and dictionaries.
- Added more extensive help to 'settings set', explaining more about dictionaries
and arrays (including current dictionary syntax).
- Fixed bug in user settings where quotes were being stripped and lost, so that
sometimes array or dictionary elements that ought to have been a single element
were being split up.
llvm-svn: 121438
if passed in a NULL new_value and the operation intended is eVarSetOperationAssign.
This fixed a bug where in TestSettings.py:
# Set the run-args and the env-vars.
self.runCmd('settings set target.process.run-args A B C')
self.runCmd('settings set target.process.env-vars ["MY_ENV_VAR"]=YES')
# And add hooks to restore the settings during tearDown().
self.addTearDownHook(
lambda: self.runCmd("settings set -r target.process.run-args"))
self.addTearDownHook(
lambda: self.runCmd("settings set -r target.process.env-vars"))
"settings set -r target.process.env-vars" was not restoring the original env-vars
setting.
llvm-svn: 116895
Change default 'set' behavior so that all instance settings for the specified variable will be
updated, unless the "-n" ("--no_override") command options is specified.
llvm-svn: 114808
the parent of Process settings; add 'default-arch' as a
class-wide setting for Target. Replace lldb::GetDefaultArchitecture
with Target::GetDefaultArchitecture & Target::SetDefaultArchitecture.
Add 'use-external-editor' as user setting to Debugger class & update
code appropriately.
Add Error parameter to methods that get user settings, for easier
reporting of bad requests.
Fix various other minor related bugs.
Fix test cases to work with new changes.
llvm-svn: 114352
replacing the "(lldb)" prompt, the "frame #1..." displays when doing
stack backtracing and the "thread #1....". This will allow you to see
exactly the information that you want to see where you want to see it.
This currently isn't hookup up to the prompts yet, but it will be soon.
So what is the format of the prompts? Prompts can contain variables that
have access to the current program state. Variables are text that appears
in between a prefix of "${" and ends with a "}". Some of the interesting
variables include:
// The frame index (0, 1, 2, 3...)
${frame.index}
// common frame registers with generic names
${frame.pc}
${frame.sp}
${frame.fp}
${frame.ra}
${frame.flags}
// Access to any frame registers by name where REGNAME is any register name:
${frame.reg.REGNAME}
// The current compile unit file where the frame is located
${file.basename}
${file.fullpath}
// Function information
${function.name}
${function.pc-offset}
// Process info
${process.file.basename}
${process.file.fullpath}
${process.id}
${process.name}
// Thread info
${thread.id}
${thread.index}
${thread.name}
${thread.queue}
${thread.stop-reason}
// Target information
${target.arch}
// The current module for the current frame (the shared library or executable
// that contains the current frame PC value):
${module.file.basename}
${module.file.fullpath}
// Access to the line entry for where the current frame is when your thread
// is stopped:
${line.file.basename}
${line.file.fullpath}
${line.number}
${line.start-addr}
${line.end-addr}
Many times the information that you might have in your prompt might not be
available and you won't want it to print out if it isn't valid. To take care
of this you can enclose everything that must resolve into a scope. A scope
is starts with '{' and ends with '}'. For example in order to only display
the current file and line number when the information is available the format
would be:
"{ at {$line.file.basename}:${line.number}}"
Broken down this is:
start the scope: "{"
format whose content will only be displayed if all information is available:
"at {$line.file.basename}:${line.number}"
end the scope: "}"
We currently can represent the infomration we see when stopped at a frame:
frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19
with the following format:
"frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n"
This breaks down to always print:
"frame #${frame.index}: ${frame.pc} "
only print the module followed by a tick if we have a valid module:
"{${module.file.basename}`}"
print the function name with optional offset:
"{${function.name}{${function.pc-offset}}"
print the line info if it is available:
"{ at ${line.file.basename}:${line.number}}"
then finish off with a newline:
"\n"
Notice you can also put newlines ("\n") and tabs and everything else you
are used to putting in a format string when desensitized with the \ character.
Cleaned up some of the user settings controller subclasses. All of them
do not have any global settings variables and were all implementing stubs
for the get/set global settings variable. Now there is a default version
in UserSettingsController that will do nothing.
llvm-svn: 114306
or a settings prefix, and it will list information about the subset of settings
you requested. Also added tab-completion (now that it takes an optional argument).
llvm-svn: 113952
Make get/set variable at the debugger level always set the particular debugger's instance variables rather than
the default variables.
llvm-svn: 113474
pending instance uses the specified instance name rather than creating a new one; add brackets to instance names
when searching for and removing pending instances.
llvm-svn: 113370
handles user settable internal variables (the equivalent of set/show
variables in gdb). In addition to the basic infrastructure (most of
which is defined in UserSettingsController.{h,cpp}, there are examples
of two classes that have been set up to contain user settable
variables (the Debugger and Process classes). The 'settings' command
has been modified to be a command-subcommand structure, and the 'set',
'show' and 'append' commands have been moved into this sub-commabnd
structure. The old StateVariable class has been completely replaced
by this, and the state variable dictionary has been removed from the
Command Interpreter. Places that formerly accessed the state variable
mechanism have been modified to access the variables in this new
structure instead (checking the term-width; getting/checking the
prompt; etc.)
Variables are attached to classes; there are two basic "flavors" of
variables that can be set: "global" variables (static/class-wide), and
"instance" variables (one per instance of the class). The whole thing
has been set up so that any global or instance variable can be set at
any time (e.g. on start up, in your .lldbinit file), whether or not
any instances actually exist (there's a whole pending and default
values mechanism to help deal with that).
llvm-svn: 113041
Zachary Turner