PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
New change: check for existence of field `cycles` in perf_branch_entry before enabling this mode.
This should prevent compilation errors when building for older kernel whose headers don't support it.
Add support for creating static libraries when the input includes only
Mach-O binaries (and not libraries/archives themselves).
Reviewed by alexshap, Ktwu, smeenai, jhenderson, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D83002
Its effect could be achieved by
`-stop-after`,`-print-after`,`-print-after-all`. But a few tests need to
print MIR after ISel which could not be done with
`-print-after`/`-stop-after` since isel pass does not have commandline name.
That's the reason `--print-machineinstrs` is downgraded to
`--print-after-isel` in this patch. `--print-after-isel` could be
removed after we switch to new pass manager since isel pass would have a
commandline text name to use `print-after` or equivalent switches.
The motivation of this patch is to reduce tests dependency on
would-be-deprecated feature.
Reviewed By: arsenm, dsanders
Differential Revision: https://reviews.llvm.org/D83275
This patch changes llvm-readelf (and llvm-readobj for consistency)
behavior to print an error when executed with no input files.
Reading from stdin can be achieved via a '-' for the input
object.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46400
Differential Revision: https://reviews.llvm.org/D83704
Reviewed by: jhenderson, MaskRay, sbc, jyknight
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
From @erichkeane:
```
This patch doesn't seem to build for me:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp: In function ‘llvm::Error llvm::exegesis::parseDataBuffer(const char*, size_t, const void*, const void*, llvm::SmallVector<long int, 4>*)’:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp:99:37: error: ‘struct perf_branch_entry’ has no member named ‘cycles’
CycleArray->push_back(Entry.cycles);
I'm on RHEL7, so I have kernel 3.10, so it doesn't have 'cycles'.
According ot this: https://elixir.bootlin.com/linux/v4.3/source/include/uapi/linux/perf_event.h#L963 kernel 4.3 is the first time that 'cycles' appeared in this structure.
```
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
In FileCheck.rst, add `-dump-input-context` and `-dump-input-filter`,
and fix some `-dump-input` documentation.
In `FileCheck -help`, `cl::value_desc("kind")` is being ignored for
`-dump-input-filter`, so just drop it.
Extend `-dump-input=help` to mention FILECHECK_OPTS.
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
Before the fix the build of docs-llvm-html would fail.
The D80959 introduced options that are not recognized, so we have
warning as:
llvm-project/llvm/docs/CommandGuide/llvm-dwarfdump.rst:40\
:unknown option: --debug-info
Differential Revision: https://reviews.llvm.org/D82460
Summary: Rename --elf-cg-profile to --cg-profile and keep --elf-cg-profile as an alias of --cg-profile.
Reviewers: jhenderson, MaskRay, espindola, hans
Reviewed By: jhenderson, MaskRay
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81855
Summary:
This completes the needed glueing to support reading tbd files from nm.
This includes specifying which slice filtering with `--arch` and a new
option specifically for tbd files `--add-inlinedinfo` which will show
the reexported libraries that are appended in the tbd file.
Reviewers: ributzka, steven_wu, JDevlieghere, jhenderson
Reviewed By: JDevlieghere
Subscribers: hiraditya, MaskRay, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81614
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for specifying the
matching constraint for a numeric expression, ie. how the value being
matched should relate to the numeric expression.
This commit only adds the equality constraint where the numeric value
matched must be equal to the numeric expression. It is the default
matching constraint used when not specified. It is added to provision
other matching constraint (e.g. inequality relations).
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D60391
This patch extends numerical expressions to allow calls to
predefined functions. These calls can be combined with the
existing numerical operators, which includes nesting calls.
The call syntax is:
<func>(<args>)
Where <func> is a predefined string literal, currently limited to
one of add, max, min and sub. <arg> is a comma seperated list of
numerical expressions.
Subscribers: arichardson, hiraditya, thopre, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79936
Having the input dumped on failure seems like a better
default: I debugged FileCheck tests for a while without knowing
about this option, which really helps to understand failures.
Remove `-dump-input-on-failure` and the environment variable
FILECHECK_DUMP_INPUT_ON_FAILURE which are now obsolete.
Differential Revision: https://reviews.llvm.org/D81422
Some of the --debug-* options can take an optional offset. Although the
man page does a good job of making that clear, it's much harder to
discover from the help output.
Currently the only reference to this is the following sentence:
> Where applicable these parameters take an optional =<offset> argument
> to dump only the entry at the specified offset.
This patch changes the help output from to print [=<offset>] after the
options that take an offset.
--debug-info[=<offset>] - Dump the .debug_info section
rdar://problem/63150066
Differential revision: https://reviews.llvm.org/D80959
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support signed numeric
values, thus allowing negative numeric values.
As such, the patch adds a new class to represent a signed or unsigned
value and add the logic for type promotion and type conversion in
numeric expression mixing signed and unsigned values. It also adds
the %d format specifier to represent signed value.
Finally, it also adds underflow and overflow detection when performing a
binary operation.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60390
With this change it is be possible to write FileCheck expressions such
as [[#(VAR+1)-2]]. Currently, the only supported arithmetic operators are
plus and minus, so this is not particularly useful yet. However, it our
CHERI fork we have tests that benefit from having multiplication in
FileCheck expressions. Allowing parenthesized expressions is the simplest
way for us to work around the current lack of operator precedence in
FileCheck expressions.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D77383
cctools strip has the option "-T" which removes Swift symbols.
This diff implements this option in llvm-strip for MachO.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D80099
llvm-extract get serveral new options, but we forgot to update doc.
This patch update the doc.
Reviewed By: volkan
Differential Revision: https://reviews.llvm.org/D80413
Add support for generating a dsymutil reproducer. The result is a folder
containing all the object files for linking.
When --gen-reproducer is passed, dsymutil uses a FileCollectorFileSystem
which keeps track of all the files used by dsymutil. These files are
copied into a temporary directory when dsymutil exists.
When this path is passed to --use-reproducer, dsymutil uses a
RedirectingFileSystem that will use the files from the reproducer
directory instead of the actual paths. This means you don't need to mess
with the OSO path prefix.
Differential revision: https://reviews.llvm.org/D79398
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
This patch adds statistics about the contribution of each object file to
the linked debug info. When --statistics is passed to dsymutil, it
prints a table after linking as illustrated below.
It lists the object file name, the size of the debug info in the object
file in bytes, and the absolute size contribution to the linked dSYM and
the percentage difference. The table is sorted by the output size, so
the object files contributing the most to the link are listed first.
.debug_info section size (in bytes)
-------------------------------------------------------------------------------
Filename Object dSYM Change
-------------------------------------------------------------------------------
basic2.macho.x86_64.o 210b 165b -24.00%
basic3.macho.x86_64.o 177b 150b -16.51%
basic1.macho.x86_64.o 125b 129b 3.15%
-------------------------------------------------------------------------------
Total 512b 444b -14.23%
-------------------------------------------------------------------------------
Differential revision: https://reviews.llvm.org/D79513
The --output-target documentation has slightly rotted, as the default is
no longer purely based on the input file format, but also the value of
--input-target. This patch updates the documentation to make this
explicit.
Reviewed by: MaskRay, alexshap
Differential Revision: https://reviews.llvm.org/D79318
This addresses:
-Clean up the source code
-Refactor the JSON fields
-Fix the test cases
-Improve the docs for the stats output
Differential Revision: https://reviews.llvm.org/D77789
Summary:
FileCheck documentation contains an example of a numeric variable
defined and used on the same line. This is not currently supported by
FileCheck so this commit fixes the example to use CHECK-SAME for the
variable use.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D79253
This option was added several months ago in commit e84468c1.
Reviewed by: MaskRay, erik.pilkington, steven_wu
Differential Revision: https://reviews.llvm.org/D79166
This change helps improve `dsymutil` documentation.
- Add missing options
- Re-arrange options in alphabetical order
- Wrap inline options in double-back-quote
- `-v` is for `--version` not `--verbose`
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D78479
Summary:
This matches the behavior of GNU addr2line. We previously treated
hexadecimal addresses as binary if they started with 0b, otherwise as
octal if they started with 0, otherwise as decimal.
This only affects llvm-addr2line; the behavior of llvm-symbolize is
unaffected.
Reviewers: ikudrin, rupprecht, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73306
LanguageExtensions.rst:2191: WARNING: Title underline too short.
llvm-symbolizer.rst:157: Error in "code-block" directive: maximum 1 argument(s) allowed, 30 supplied.
This patch adds missing description of enable-no-signed-zeros-fp-math
and enable-no-trapping-fp-math options of llc.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D77713
The LitConfig is shared across the whole test suite. However, since
enabling recursive expansion can be a breaking change for some test
suites, it's important to confine the setting to test suites that
enable it explicitly.
Note that other issues were raised with the way recursiveExpansionLimit
operates. However, this commit simply moves the setting to the right
place -- the mechanism by which it works can be improved independently.
Differential Revision: https://reviews.llvm.org/D77415
Varun Gandhi