This patch expands the support of lowerInterleavedStore to 32x8i stride 4.
LLVM creates suboptimal shuffle code-gen for AVX2. In overall, this patch is a specific fix for the pattern (Strid=4 VF=32) and we plan to include more patterns in the future. To reach our goal of "more patterns". We include two mask creators. The first function creates shuffle's mask equivalent to unpacklo/unpackhi instructions. The other creator creates mask equivalent to a concat of two half vectors(high/low).
The patch goal is to optimize the following sequence:
At the end of the computation, we have ymm2, ymm0, ymm12 and ymm3 holding
each 32 chars:
c0, c1, , c31
m0, m1, , m31
y0, y1, , y31
k0, k1, ., k31
And these need to be transposed/interleaved and stored like so:
c0 m0 y0 k0 c1 m1 y1 k1 c2 m2 y2 k2 c3 m3 y3 k3 ....
Reviewers:
dorit
Farhana
RKSimon
guyblank
DavidKreitzer
Differential Revision: https://reviews.llvm.org/D34601
llvm-svn: 309086
Changing mask argument type from const SmallVectorImpl<int>& to
ArrayRef<int>.
This came up in D35700 where a mask is received as an ArrayRef<int> and
we want to pass it to TargetLowering::isShuffleMaskLegal().
Also saves a few lines of code.
llvm-svn: 309085
splitting patch D34601 into two part. This part changes the location of two functions.
The second part will be based on that patch. This was requested by @RKSimon.
Reviewers:
1. dorit
2. Farhana
3. RKSimon
4. guyblank
5. DavidKreitzer
llvm-svn: 309084
Summary: The aligned load predicates don't suppress themselves if the load is non-temporal the way the unaligned predicates do. For the most part this isn't a problem because the aligned predicates are mostly used for instructions that only load the the non-temporal loads have priority over those. The exception are masked loads.
Reviewers: RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35712
llvm-svn: 309079
This patch just adds printing of CR bit registers in a more human-readable
form akin to that used by the GNU binutils.
Differential Revision: https://reviews.llvm.org/D31494
llvm-svn: 309001
D35067/rL308322 attempted to support up to 4 load pairs for memcmp inlining which resulted in regressions for some optimized libc memcmp implementations (PR33914).
Until we can match these more optimal cases, this patch reduces the memcmp expansion to a maximum of 2 load pairs (which matches what we do for -Os).
This patch should be considered for the 5.0.0 release branch as well
Differential Revision: https://reviews.llvm.org/D35830
llvm-svn: 308986
Summary:
Some SPARC TLS relocations were applying nontrivial adjustments
to zero value, leading to unexpected non-zero values in ELF and then
Solaris linker failures.
Getting rid of these adjustments.
Fixes PR33825.
Reviewers: rafael, asb, jyknight
Subscribers: joerg, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D35567
llvm-svn: 308978
Enable runtime and partial loop unrolling of simple loops without
calls on M-class cores. The thresholds are calculated based on
whether the target is Thumb or Thumb-2.
Differential Revision: https://reviews.llvm.org/D34619
llvm-svn: 308956
Create a dummy 8 byte fixed object for the unused slot below the first
stored vararg.
Alternative ideas tested but skipped: One could try to align the whole
fixed object to 16, but I haven't found how to add an offset to the stack
frame used in LowerWin64_VASTART.
If only the size of the fixed stack object size is padded but not the offset, via
MFI.CreateFixedObject(alignTo(GPRSaveSize, 16), -(int)GPRSaveSize, false),
PrologEpilogInserter crashes due to "Attempted to reset backwards range!".
This fixes misconceptions about where registers are spilled, since
AArch64FrameLowering.cpp assumes the offset from fixed objects is
aligned to 16 bytes (and the Win64 case there already manually aligns
the offset to 16 bytes).
This fixes cases where local stack allocations could overwrite callee
saved registers on the stack.
Differential Revision: https://reviews.llvm.org/D35720
llvm-svn: 308950
This reverts r308867 and r308866.
It broke the sanitizer-windows buildbot on C++ code similar to the
following:
namespace cl { }
void f() {
__asm {
mov al, cl
}
}
t.cpp(4,13): error: unexpected namespace name 'cl': expected expression
mov al, cl
^
In this case, MSVC parses 'cl' as a register, not a namespace.
llvm-svn: 308926
On MS-style, the following snippet:
int eax;
__asm mov eax, ebx
should yield loading of ebx, into the location pointed by the variable eax
This patch sees to it.
Currently, a reg-to-reg move would have been invoked.
clang: D34740
Differential Revision: https://reviews.llvm.org/D34739
llvm-svn: 308866
This patch removes unnecessary zero copies in BBs that are targets of b.eq/b.ne
and we know the result of the compare instruction is zero. For example,
BB#0:
subs w0, w1, w2
str w0, [x1]
b.ne .LBB0_2
BB#1:
mov w0, wzr ; <-- redundant
str w0, [x2]
.LBB0_2
Differential Revision: https://reviews.llvm.org/D35075
llvm-svn: 308849
These patterns were only missing to favor using the legacy instructions when the shift was a constant. With careful adjustment of the pattern complexity we can make sure the immediate instructions still have priority over these patterns.
llvm-svn: 308834
MIR SRADI uses instruction template XSForm_1rc which declares Defs = [CARRY]. But MIR SRADI_32 uses instruction template XSForm_1, and it doesn't declare such implicit definition. With patch D33720 it causes wrong code generation for perl.
This patch adds the implicit definition.
Differential Revision: https://reviews.llvm.org/D35699
llvm-svn: 308780
Fixes verifier errors in some call tests.
Not sure why we haven't run into this before.
Test split into separate patch for once
call support is committed.
llvm-svn: 308774
-membedded-data changes the location of constant data from the .sdata to
the .rodata section. Previously it was (incorrectly) always located in the
.rodata section.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D35686
llvm-svn: 308758
Follow up to r306280 in Clang.
Enable IAS by default for Android MIPS64 (uses N64 ABI).
Differential Revision: https://reviews.llvm.org/D35482
llvm-svn: 308742
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
Currently we only support (i32 bitcast(v32i1)) using the AVX2 VPMOVMSKB ymm instruction.
This patch adds support for splitting pre-AVX2 targets into 2 x (V)PMOVMSKB xmm instructions and merging the integer results.
In future we could probably generalize this to handle more cases.
Differential Revision: https://reviews.llvm.org/D35303
llvm-svn: 308723
It revealed a bug in the Localizer pass which has now been fixed.
This includes the fix for SUBREG_TO_REG committed separately last time.
llvm-svn: 308688
The patch adds support of i128 params lowering. The changes are quite trivial to
support i128 as a "special case" of integer type. With this patch, we lower i128
params the same way as aggregates of size 16 bytes: .param .b8 _ [16].
Currently, NVPTX can't deal with the 128 bit integers:
* in some cases because of failed assertions like
ValVTs.size() == OutVals.size() && "Bad return value decomposition"
* in other cases emitting PTX with .i128 or .u128 types (which are not valid [1])
[1] http://docs.nvidia.com/cuda/parallel-thread-execution/index.html#fundamental-types
Differential Revision: https://reviews.llvm.org/D34555
Patch by: Denys Zariaiev (denys.zariaiev@gmail.com)
llvm-svn: 308675
Move the _RTN to the end of the name. It reads
better if the other addressing mode components
line up with the non-RTN version. It is also
more convenient to define saddr variants of
FLAT atomics to have the RTN last, and it is
good to have a consistent naming scheme.
llvm-svn: 308674
On AMDGPU SGPR spills are really spilled to another register.
The spiller creates the spills to new frame index objects,
which is used as a placeholder.
This will eventually be replaced with a reference to a position
in a VGPR to write to and the frame index deleted. It is
most likely not a real stack location that can be shared
with another stack object.
This is a problem when StackSlotColoring decides it should
combine a frame index used for a normal VGPR spill with
a real stack location and a frame index used for an SGPR.
Add an ID field so that StackSlotColoring has a way
of knowing the different frame index types are
incompatible.
llvm-svn: 308673
Summary:
Also enable no-fsmuld for sparcv7 (which doesn't have the
instruction).
The previous code which used a post-processing pass to do this was
unnecessary; disabling the instruction is entirely sufficient.
Reviewers: jacob_hansen, ekedaigle
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35576
llvm-svn: 308661
This patch adds handling of the `long_call`, `far`, and `near`
attributes passed by front-end. The patch depends on D35479.
Differential revision: https://reviews.llvm.org/D35480.
llvm-svn: 308606
Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
llvm-svn: 308595
The soffset field needs to be be set to 0x7f to disable it,
not 0. 0 is interpreted as an SGPR offset.
This should be enough to get basic usage of the global instructions
working. Technically it is possible to use an SGPR_32 offset,
but I'm not sure if it's correct with 64-bit pointers, but
that is not handled now. This should also be cleaned up
to be more similar to how different MUBUF modes are handled,
and to have InstrMappings between the different types.
llvm-svn: 308583
This generalizes an existing fix from ELF to MachO and COFF.
Test that an ADRP to a local symbol whose offset is known at assembly
time still produces relocations, both for MachO and COFF. Test that
an ADRP without a @page modifier on MachO fails (previously it
didn't).
Differential Revision: https://reviews.llvm.org/D35544
llvm-svn: 308518
This patch cleans up and fixes issues in the M-Class system register handling:
1. It defines the system registers and the encoding (SYSm values) in one place:
a new ARMSystemRegister.td using SearchableTable, thereby removing the
hand-coded values which existed in multiple places.
2. Some system registers e.g. BASEPRI_MAX_NS which do not exist were being allowed!
Ref: ARMv6/7/8M architecture reference manual.
Reviewed by: @t.p.northover, @olist01, @john.brawn
Differential Revision: https://reviews.llvm.org/D35209
llvm-svn: 308456
Summary:
This patch adds the following
1. Adds a skeleton scheduler model for AMD Znver1.
2. Introduces the znver1 execution units and pipes.
3. Caters the instructions based on the generic scheduler classes.
4. Further additions to the scheduler model with instruction itineraries will be carried out incrementally based on
a. Instructions types
b. Registers used
5. Since itineraries are not added based on instructions, throughput information are bound to change when incremental changes are added.
6. Scheduler testcases are modified accordingly to suit the new model.
Patch by Ganesh Gopalasubramanian. With minor formatting tweaks from me.
Reviewers: craig.topper, RKSimon
Subscribers: javed.absar, shivaram, ddibyend, vprasad
Differential Revision: https://reviews.llvm.org/D35293
llvm-svn: 308411
Added a feature to the Sparc back-end that replaces the integer multiply and
divide instructions with calls to .mul/.sdiv/.udiv. This is a step towards
having full v7 support.
Patch by: Eric Kedaigle
Differential Revision: https://reviews.llvm.org/D35500
llvm-svn: 308343
As an approximation of the existing handling to avoid
regressions. Fixes using too many registers with calls
on subtargets with the SGPR allocation bug.
llvm-svn: 308326
Introduce pseudo-registers for registers needed for stack
access, which are replaced during finalizeLowering.
Note these pseudo-registers are currently only used for the
used register location, and not for determining their
input argument register.
This is better because it avoids the need to try to predict
whether a call will be emitted from the IR, and also
detects stack objects introduced by legalization.
Test changes are from the HasStackObjects check being more
accurate since stack objects introduced during legalization
are now known.
llvm-svn: 308325
It should be a win to avoid going out to the system lib for all small memcmp() calls using scalar ops. For x86 32-bit, this means most everything up to 16 bytes. For 64-bit, that doubles because we can do 8-byte loads.
Notes:
Reduced from 4 to 2 loads for -Os behavior, which might not be optimal in all cases. It's effectively a question of how much do we trust the system implementation. Linux and macOS (and Windows I assume, but did not test) have optimized memcmp() code for x86, so it's probably not bad either way? PPC is using 8/4 for defaults on these. We do not expand at all for -Oz.
There are still potential improvements to make for the CGP expansion IR and/or lowering such as avoiding select-of-constants (D34904) and not doing zexts to the max load type before doing a compare.
We have special-case SSE/AVX codegen for (memcmp(x, y, 16/32) == 0) that will no longer be produced after this patch. I've shown the experimental justification for that change in PR33329:
https://bugs.llvm.org/show_bug.cgi?id=33329#c12
TLDR: While the vector code is a likely winner, we can't guarantee that it's a winner in all cases on all CPUs, so I'm willing to sacrifice it for the greater good of expanding all small memcmp(). If we want to resurrect that codegen, it can be done by adjusting the CGP params or poking a hole to let those fall-through the CGP expansion.
Committed on behalf of Sanjay Patel
Differential Revision: https://reviews.llvm.org/D35067
llvm-svn: 308322
The flag "-hexagon-emit-lut-text" (defaulted to false) is added to decide
on where to keep the switch generated lookup table.
Differential Revision: https://reviews.llvm.org/D34818
llvm-svn: 308316
Summary:
When an immediate is folded by constant folding, we re-scan the entire
use list for two reasons:
1. The constant folding may have created a new use of the same reg.
2. The constant folding may have removed an additional use in the list
we're currently traversing (e.g., constant folding an S_ADD_I32 c, c).
However, this could previously lead to a crash when an unrelated use was
added twice into the FoldList. Since we re-scan the whole list anyway, we
might as well just clear the FoldList again before we do so.
Using a MIR test to show this because real code seems to trigger the issue
only in connection with some really subtle control flow structures.
Fixes GL45-CTS.shading_language_420pack.binding_images on gfx9.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D35416
llvm-svn: 308314
Summary:
G_FMA was recently added to GlobalISel which enables the import of rules
involving fma. Add the mapping to allow it.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35130
llvm-svn: 308308
This change introduces additional machine instructions in functions
dealing with the expansion of msa pseudo f16 instructions due to
register classes being inappropriate when checked with machine
verifier.
Differential Revision: https://reviews.llvm.org/D34276
llvm-svn: 308301
Cleaned up the code in FastISel a bit.
Had to add make_range to MCInstrDesc as that was needed and seems missing.
Reviewed by: @t.p.northover
Differential Revision: https://reviews.llvm.org/D35494
llvm-svn: 308291
This isn't legal code, but we shouldn't crash on it. Now we just don't convert the gather intrinsic if the scale isn't constant and let it go through to isel where we'll report an isel failure.
Fixes PR33772.
llvm-svn: 308267
This wasn't necessary before since they are always enabled
for kernels, but this is necessary if they need to be
forwarded to a callable function.
llvm-svn: 308226
Rename the enum value from X86_64_Win64 to plain Win64.
The symbol exposed in the textual IR is changed from 'x86_64_win64cc'
to 'win64cc', but the numeric value is kept, keeping support for
old bitcode.
Differential Revision: https://reviews.llvm.org/D34474
llvm-svn: 308208
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
llvm-svn: 308196
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
The target-independent lowering works fine, except concatenating 32-bit
words. Add a pattern to generate A2_combinew instead of 64-bit asl/or.
llvm-svn: 308186
Prevent store merge from merging stores into an invalid 128-bit store
(realized as a f128 value in the context of the noimplicitfloat
attribute). Previously, such stores are immediately split back into
valid stores.
llvm-svn: 308184
Summary:
Previously, CodeGen checked first src operand type to determine if omod is supported by instruction. This isn't correct for some instructions: e.g. V_CMP_EQ_F32 has floating-point src operands but desn't support omod.
Changed .td files to check if dst operand instead of src operand.
Reviewers: arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D35350
llvm-svn: 308179
LLVM compiler recognizes opportunities to transform a branch into IR select instruction(s) - later it will be lowered into X86::CMOV instruction, assuming no other optimization eliminated the SelectInst.
However, it is not always profitable to emit X86::CMOV instruction. For example, branch is preferable over an X86::CMOV instruction when:
1. Branch is well predicted
2. Condition operand is expensive, compared to True-value and the False-value operands
In CodeGenPrepare pass there is a shallow optimization that tries to convert SelectInst into branch, but it is not enough.
This commit, implements machine optimization pass that converts X86::CMOV instruction(s) into branch, based on a conservative heuristic.
Differential Revision: https://reviews.llvm.org/D34769
llvm-svn: 308142
If the `long-calls` feature flags is enabled, disable use of the `jal`
instruction. Instead of that call a function by by first loading its
address into a register, and then using the contents of that register.
Differential revision: https://reviews.llvm.org/D35168
llvm-svn: 308087
The type needs to be casted back to the original argument type.
Fixes an assert that for some reason is only run when
using -debug.
Includes an additional combine to avoid test regressions
from having conversions mixed with multiple Assert[SZ]ext
nodes. On subtargets where i16 is legal, this was producing an i32
register with an i16 AssertZExt, truncated to i16 with another i8
AssertZExt.
t2: i32,ch = CopyFromReg t0, Register:i32 %vreg0
t3: i16 = truncate t2
t5: i16 = AssertZext t3, ValueType:ch:i8
t6: i8 = truncate t5
t7: i32 = zero_extend t6
llvm-svn: 308082
Currently, for code like below,
===
inner_map = bpf_map_lookup_elem(outer_map, &port_key);
if (!inner_map) {
inner_map = &fallback_map;
}
===
the compiler generates (pseudo) code like the below:
===
I1: r1 = bpf_map_lookup_elem(outer_map, &port_key);
I2: r2 = 0
I3: if (r1 == r2)
I4: r6 = &fallback_map
I5: ...
===
During kernel verification process, After I1, r1 holds a state
map_ptr_or_null. If I3 condition is not taken
(path [I1, I2, I3, I5]), supposedly r1 should become map_ptr.
Unfortunately, kernel does not recognize this pattern
and r1 remains map_ptr_or_null at insn I5. This will cause
verificaiton failure later on.
Kernel, however, is able to recognize pattern "if (r1 == 0)"
properly and give a map_ptr state to r1 in the above case.
LLVM here generates suboptimal code which causes kernel verification
failure. This patch fixes the issue by changing BPF insn pattern
matching and lowering to generate proper codes if the righthand
parameter of the above condition is a constant. A test case
is also added.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 308080
Restricting register class to PointerRegClass for memory operands.
Also fix the PointerRegClass for AArch64 from GPR64 to GPR64sp, since
XZR cannot hold a memory pointer while SP is.
Fixes PR33134.
Differential Revision: https://reviews.llvm.org/D34999
llvm-svn: 308060
Summary:
This patch is the first step in reducing HW prefetcher instruction tag
collisions in inner loops for Falkor. It adds a pass that annotates IR
loads with metadata to indicate that they are known to be strided loads,
and adds a target lowering hook that translates this metadata to a
target-specific MachineMemOperand flag.
A follow on change will use this MachineMemOperand flag to re-write
instructions to reduce tag collisions.
Reviewers: mcrosier, t.p.northover
Subscribers: aemerson, rengolin, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34963
llvm-svn: 308059
In moveToVALU(), move to vector ALU is performed, all instrs in
the use chain will be visited. We do not want the same node to be
pushed to the visit worklist more than once.
Differential Revision: https://reviews.llvm.org/D34726
llvm-svn: 308039
This is the LLVM part, adding definitions for
void @llvm.hexagon.Y2.dccleana(i8*)
void @llvm.hexagon.Y2.dccleaninva(i8*)
void @llvm.hexagon.Y2.dcinva(i8*)
void @llvm.hexagon.Y2.dczeroa(i8*)
void @llvm.hexagon.Y4.l2fetch(i8*, i32)
void @llvm.hexagon.Y5.l2fetch(i8*, i64)
The clang part will follow.
llvm-svn: 308032
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Function InRange is changed to avoid left shifting of negative values, since
that caused some sanitizer tests to fail (so the previous patch
Differential Revision: https://reviews.llvm.org/D34511
llvm-svn: 308011
Insert a TSTri to set the flags and a Bcc to branch based on their
values. This is a bit inefficient in the (common) cases where the
condition for the branch comes from a compare right before the branch,
since we set the flags both as part of the compare lowering and as part
of the branch lowering. We're going to live with that until we settle on
a principled way to handle this kind of situation, which occurs with
other patterns as well (combines might be the way forward here).
llvm-svn: 308009
Constants are crucial for code size in the ARM Thumb-1 instruction
set. The 16 bit instruction size often does not offer enough space
for immediate arguments. This means that additional instructions are
frequently used to load constants into registers. Since constants are
hoisted, this can lead to significant register spillage if they are
used multiple times in a single function. This can be avoided by
rematerialization, i.e. recomputing a constant instead of reloading
it from the stack. This patch fixes the rematerialization of literal
pool loads in the ARM Thumb instruction set.
Patch by Philip Ginsbach
Differential Revision: https://reviews.llvm.org/D33936
llvm-svn: 308004
Since GFX9 supports denorm modes for v_min_f32/v_max_f32 that
is possible to further optimize fcanonicalize and remove it
if applied to min/max given their operands are known not to be
an sNaN or that sNaNs are not supported.
Additionally we can remove fcanonicalize if denorms are supported
for the VT and we know that its argument is never a NaN.
Differential Revision: https://reviews.llvm.org/D35335
llvm-svn: 307976
As outlined in the PR, we didn't ensure that displacements for DQ-Form
instructions are multiples of 16. Since the instruction encoding encodes
a quad-word displacement, a sub-16 byte displacement is meaningless and
ends up being encoded incorrectly.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33671.
Differential Revision: https://reviews.llvm.org/D35007
llvm-svn: 307934
Pass parameters properly in calls to such functions (pass all
floats in integer registers), and handle va_start properly (allocate
stack immediately below the arguments on the stack, to save the
register arguments into a single continuous array).
Differential Revision: https://reviews.llvm.org/D35006
llvm-svn: 307928
The AsmParser mnemonic spell checker was introduced in r307148 and enabled only
for ARM. This patch enables it for AArch64.
Differential Revision: https://reviews.llvm.org/D35357
llvm-svn: 307918
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
The previous version of this patch was too aggressive in producing fused
integer multiple-addition instructions.
llvm-svn: 307906
This boils down to not crashing in reg bank select due to the lack of
register operands on this instruction, and adding some tests. The
instruction selection is already covered by the TableGen'erated code.
llvm-svn: 307904
This patch tidies up and organises ARM.td
so that it is easier to understandand
and extend in the future.
Reviewed by: @hahn, @rovka
Differential Revision: https://reviews.llvm.org/D35248
llvm-svn: 307897
Summary:
Similar to X86, it should be safe to inline callees if their
target-features are a subset of the caller. As some subtarget features
provide different instructions depending on whether they are set or
unset (e.g. ThumbMode and ModeSoftFloat), we use a whitelist of
target-features describing hardware capabilities only.
Reviewers: kristof.beyls, rengolin, t.p.northover, SjoerdMeijer, peter.smith, silviu.baranga, efriedma
Reviewed By: SjoerdMeijer, efriedma
Subscribers: dschuff, efriedma, aemerson, sdardis, javed.absar, arichardson, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D34697
llvm-svn: 307889
Summary: Add target hooks for printing and parsing target MMO flags.
Targets may override getSerializableMachineMemOperandTargetFlags() to
return a mapping from string to flag value for target MMO values that
should be serialized/parsed in MIR output.
Add implementation of this hook for AArch64 SuppressPair MMO flag.
Reviewers: bogner, hfinkel, qcolombet, MatzeB
Subscribers: mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D34962
llvm-svn: 307877
Summary: Continuing the work from https://reviews.llvm.org/D33240, this change introduces an element unordered-atomic memset intrinsic. This intrinsic is essentially memset with the implementation requirement that all stores used for the assignment are done with unordered-atomic stores of a given element size.
Reviewers: eli.friedman, reames, mkazantsev, skatkov
Reviewed By: reames
Subscribers: jfb, dschuff, sbc100, jgravelle-google, aheejin, efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D34885
llvm-svn: 307854
We are using multiplication by 1.0 to flush denormals and quiet sNaNs.
That is possible to omit this multiplication if source of the
fcanonicalize instruction is known to be flushed/quieted, i.e.
if it comes from another instruction known to do the normalization
and we are using IEEE mode to quiet sNaNs.
Differential Revision: https://reviews.llvm.org/D35218
llvm-svn: 307848
Summary:
isFusion returns true if the subtarget supports any kind of instruction
fusion, similar to ARMSubtarget::isFusion. This was suggested in D34142.
This changes the current behavior slightly, because the macro fusion mutation
is now added to the PostRA MachineScheduler in case the subtarget supports
any kind of fusion. I think that makes sense because if the PostRA
MachineScheduler is run, there is potential that instructions scheduled back to
back are re-scheduled.
Reviewers: evandro, t.p.northover, joelkevinjones, joel_k_jones, steleman
Reviewed By: joelkevinjones
Subscribers: joel_k_jones, aemerson, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34958
llvm-svn: 307842
Summary:
Element atomic intrinsicAtomic instructions are not yet supported in WebAssembly, so we mark them as
unsupported for the moment.
Reviewers: sunfish, dschuff, sbc100
Reviewed By: dschuff, sbc100
Subscribers: jfb, sbc100, jgravelle-google
Differential Revision: https://reviews.llvm.org/D35322
llvm-svn: 307841
Where is is needed (at the end of headers that define it), be
consistent about its use.
Also fix a few header guards that I found in the process.
Differential Revision: https://reviews.llvm.org/D34916
llvm-svn: 307840
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
Summary:
Revision 307796 caused an internal build break in WebAssembly bots in the form of a
crash. ex:
Here's the crash dump from one of the failing tests:
/usr/local/google/home/blaikie/dev/llvm/build/default/./bin/llc < /usr/local/google/home/blaikie/dev/llvm/src/test/CodeGen/WebAssembly/global.ll -asm-verbose=false -disable-wasm-fallthrough-return-opt -disable-wasm-explicit-locals | /usr/local/google/home/blaikie/dev/llvm/build/default/./bin/FileCheck /usr/local/google/home/blaikie/dev/llvm/src/test/CodeGen/WebAssembly/global.ll
--
Exit Code: 2
Command Output (stderr):
--
Stack dump:
0. Program arguments: build/default/./bin/llc -asm-verbose=false -disable-wasm-fallthrough-return-opt -disable-wasm-explicit-locals
1. Running pass 'Function Pass Manager' on module '<stdin>'.
2. Running pass 'WebAssembly Assembly Printer' on function '@call_memcpy'
FileCheck error: '-' is empty.
FileCheck command line: build/default/./bin/FileCheck src/test/CodeGen/WebAssembly/global.ll
The problem is in lib/Target/WebAssembly/WebAssemblyRuntimeLibcallSignatures.cpp. There’s an array declared:
545 static const char *
Fix to web assembly lib call list
Summary:
Revision 307796 caused an internal build break in WebAssembly bots in the form of a
crash. ex:
Here's the crash dump from one of the failing tests:
/usr/local/google/home/blaikie/dev/llvm/build/default/./bin/llc < /usr/local/google/home/blaikie/dev/llvm/src/test/CodeGen/WebAssembly/global.ll -asm-verbose=false -disable-wasm-fallthrough-return-opt -disable-wasm-explicit-locals | /usr/local/google/home/blaikie/dev/llvm/build/default/./bin/FileCheck /usr/local/google/home/blaikie/dev/llvm/src/test/CodeGen/WebAssembly/global.ll
--
Exit Code: 2
Command Output (stderr):
--
Stack dump:
0. Program arguments: build/default/./bin/llc -asm-verbose=false -disable-wasm-fallthrough-return-opt -disable-wasm-explicit-locals
1. Running pass 'Function Pass Manager' on module '<stdin>'.
2. Running pass 'WebAssembly Assembly Printer' on function '@call_memcpy'
FileCheck error: '-' is empty.
FileCheck command line: build/default/./bin/FileCheck src/test/CodeGen/WebAssembly/global.ll
The problem is in lib/Target/WebAssembly/WebAssemblyRuntimeLibcallSignatures.cpp. There’s an array declared:
static const char *
RuntimeLibcallNames[RTLIB::UNKNOWN_LIBCALL] = {
That is defining a runtime lib call name for each entry in the enum RTLIB:Libcall from include/llvm/CodeGen/RuntimeLibcalls.h.
Revision 307796 added entries to the enum, but didn’t add entries to the RuntimeLibcallNames array, which caused a crash when attempting
to access past the end of the array.
This patch fixes the issue by adding the element atomic memmove to the WebAssembly arrays.
Reviewed by: reames
llvm-svn: 307831
A generic variant of IMPLICIT_DEF was added in r306875, but this
survives to selection and hits a `Cannot Select`. Add handling that
converts the note to a regular IMPLICIT_DEF.
llvm-svn: 307817
FastIsel can't handle them, so we would end up crashing during
register class selection.
Fixes PR26522.
Differential Revision: https://reviews.llvm.org/D35272
llvm-svn: 307797
When we have a diamond ifcvt the fallthough block will have a branch at the end
of it that disappears when predicated, so discount it from the predication cost.
Differential Revision: https://reviews.llvm.org/D34952
llvm-svn: 307788
Refactor CmpHelper into something simpler. It was overkill to use
templates for this - instead, use a simple CmpConstants structure to
hold the opcodes and other constants that are different when selecting
int / float / double comparisons. Also, extract some of the helpers that
were in CmpHelper into ARMInstructionSelector and make use of some of
them when selecting other things than just compares.
llvm-svn: 307766
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
This patch implements the .module and .set directives for the MT ASE,
notably that .module sets the relevant flags in .MIPS.abiflags and .set
doesn't.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35249
llvm-svn: 307716
For ELF, a movw+movt pair is handled as two separate relocations.
If an offset should be applied to the symbol address, this offset is
stored as an immediate in the instruction (as opposed to stored as an
offset in the relocation itself).
Even though the actual value stored in the movt immediate after linking
is the top half of the value, we need to store the unshifted offset
prior to linking. When the relocation is made during linking, the offset
gets added to the target symbol value, and the upper half of the value
is stored in the instruction.
This makes sure that movw+movt with offset symbols get properly
handled, in case the offset addition in the lower half should be
carried over to the upper half.
This makes the output from the additions to the test case match
the output from GNU binutils.
For COFF and MachO, the movw/movt relocations are handled as a pair,
and the overflow from the lower half gets carried over to the movt,
so they should keep the shifted offset just as before.
Differential Revision: https://reviews.llvm.org/D35242
llvm-svn: 307713
Preparatory work for adding the MIPS MT (multi-threading) ASE instructions.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35247
llvm-svn: 307679
1. The available program storage region of the red zone to compilers is 288
bytes rather than 244 bytes.
2. The formula for negative number alignment calculation should be
y = x & ~(n-1) rather than y = (x + (n-1)) & ~(n-1).
Differential Revision: https://reviews.llvm.org/D34337
llvm-svn: 307672
This change allows the pc to be used as a destination register for the
pseudo instruction LDR pc,=expression . The pseudo instruction must not be
transformed into a MOV, but it can use the Thumb2 LDR (literal) instruction
to a constant pool entry. See (A7.7.43 from ARMv7M ARM ARM).
Differential Revision: https://reviews.llvm.org/D34751
llvm-svn: 307640
We used to forget to erase the original instruction when replacing a
G_FCMP true/false. Fix this bug and make sure the tests check for it.
llvm-svn: 307639
TreePatternNode considers them to be plain integers but MachineInstr considers
them to be a distinct kind of operand.
The tweak to AArch64InstrInfo.td to produce a simple test case is a NFC for
everything except GlobalISelEmitter (confirmed by diffing the tablegenerated
files). GlobalISelEmitter is currently unable to infer the type of operands in
the Dst pattern from the operands in the Src pattern.
llvm-svn: 307634
In the POWER9 instruction scheduler, SchedWriteRes for the simple integer instructions are misconfigured to use that of (costly) DFU instructions.
This results in surprisingly long instruction latency estimation and causes misbehavior in some optimizers such as if-conversion.
Differential Revision: https://reviews.llvm.org/D34869
llvm-svn: 307624
This patch reduces compilation time by avoiding redundant analysis while selecting instructions to create an immediate.
If the instruction count required to create the input number without rotate is 2, we do not need further analysis to find a shorter instruction sequence with rotate; rotate + load constant cannot be done by 1 instruction (i.e. getInt64CountDirectnever return 0).
This patch should not change functionality.
Differential Revision: https://reviews.llvm.org/D34986
llvm-svn: 307623
An instruction that has an immediate operand can't reach
this point. This is only called for a freshly shrunk instruction,
which prevously couldn't have had a literal constant operand.
This was also not conservative enough since it woudl also have
had to filter other constant-like inputs like frame indexes.
llvm-svn: 307574
For this example:
float test (int *arr) {
return arr[2];
}
We currently generate the following code:
li r4, 8
lxsiwax f0, r3, r4
xscvsxdsp f1, f0
With this patch, we will now generate:
addi r3, r3, 8
lxsiwax f0, 0, r3
xscvsxdsp f1, f0
Originally reported in: https://bugs.llvm.org/show_bug.cgi?id=27204
Differential Revision: https://reviews.llvm.org/D35027
llvm-svn: 307553
The SandyBridge architects have provided us with a more accurate information about each instruction latency, number of uOPs and used ports and I used it to replace the existing estimated SNB instructions scheduling and to add missing scheduling information.
Please note that the patch extensively affects the X86 MC instr scheduling for SNB.
Also note that this patch will be followed by additional patches for the remaining target architectures HSW, IVB, BDW, SKL and SKX.
The updated and extended information about each instruction includes the following details:
•static latency of the instruction
•number of uOps from which the instruction consists of
•all ports used by the instruction's' uOPs
For example, the following code dictates that instructions, ADC64mr, ADC8mr, SBB64mr, SBB8mr have a static latency of 9 cycles. Each of these instructions is decoded into 6 micro operations which use ports 4, ports 2 or 3 and port 0 and ports 0 or 1 or 5:
def SBWriteResGroup94 : SchedWriteRes<[SBPort4,SBPort23,SBPort0,SBPort015]> {
let Latency = 9;
let NumMicroOps = 6;
let ResourceCycles = [1,2,2,1];
}
def: InstRW<[SBWriteResGroup94], (instregex "ADC64mr")>;
def: InstRW<[SBWriteResGroup94], (instregex "ADC8mr")>;
def: InstRW<[SBWriteResGroup94], (instregex "SBB64mr")>;
def: InstRW<[SBWriteResGroup94], (instregex "SBB8mr")>;
Note that apart for the header, most of the X86SchedSandyBridge.td file was generated by a script.
Reviewers: zvi, chandlerc, RKSimon, m_zuckerman, craig.topper, igorb
Differential Revision: https://reviews.llvm.org/D35019#inline-304691
llvm-svn: 307529
Summary:
Mark G_ZEXT/G_SEXT i1 to i8/i16, i8 to i16 as legal.
Support G_ZEXT i1 to i8/i16 instruction selection ( C++ code).
This patch requred to support G_LOAD/G_STORE i1.
Reviewers: zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D35177
llvm-svn: 307526
GHC 8.4 will know how to use YMM and ZMM registers for calls.
Submitted on behalf of @bgamari (Ben Gamari)
Differential Revision: https://reviews.llvm.org/D34854
llvm-svn: 307504
Add breaks - doesn't affect results as both GPR/FPU both check for 32/64 bit sizes. So will still default to GenericOps in the same way.
llvm-svn: 307484
x86 scalar select-of-constants (Cond ? C1 : C2) combining/lowering is a mess
with missing optimizations. We handle some patterns, but miss logical variants.
To clean that up, we should convert all select-of-constants to logic/math and
enhance the combining for the expected patterns from that. Selecting 0 or -1
needs extra attention to produce the optimal code as shown here.
Attempt to verify that all of these IR forms are logically equivalent:
http://rise4fun.com/Alive/plxs
Earlier steps in this series:
rL306040
rL306072
rL307404 (D34652)
As acknowledged in the earlier review, there's a possibility that some Intel
uarch would prefer to produce an xor to clear the fake register operand with
sbb %eax, %eax. This will likely need to be addressed in a separate pass.
llvm-svn: 307471
r306334 fixed a bug in AArch64 dealing with wide interleaved accesses having
pointer types. The bug also exists in ARM, so this patch copies over the fix.
llvm-svn: 307409
x86 scalar select-of-constants (Cond ? C1 : C2) combining/lowering is a mess
with missing optimizations. We handle some patterns, but miss logical variants.
To clean that up, we should convert all select-of-constants to logic/math and
enhance the combining for the expected patterns from that. DAGCombiner already
has the foundation to allow the transforms, so we just need to fill in the holes
for x86 math op lowering. Selecting 0 or -1 needs extra attention to produce the
optimal code as shown here.
Attempt to verify that all of these IR forms are logically equivalent:
http://rise4fun.com/Alive/plxs
Earlier steps in this series:
rL306040
rL306072
Differential Revision: https://reviews.llvm.org/D34652
llvm-svn: 307404
Michael Zuckerman