The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
Assert that a binary expression is actually a binary expression,
rather than potientially incorrectly attempting to handle it as a
unary expression.
This resolves PR34083.
Thanks to Simonn Pilgrim for reporting the issue!
llvm-svn: 310460
Author: milena.vujosevic.janicic
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Usage of u_int64_t replaced by uint64_t to avoid issues because of which previous patch version was reverted:
Differential Revision: https://reviews.llvm.org/D34511
llvm-svn: 310044
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
This patch enables control flow optimization for
variations of BBIT instruction. In this case
optimization removes unnecessary branch after
BBIT instruction.
Differential Revision: https://reviews.llvm.org/D35359
llvm-svn: 309679
Changing mask argument type from const SmallVectorImpl<int>& to
ArrayRef<int>.
This came up in D35700 where a mask is received as an ArrayRef<int> and
we want to pass it to TargetLowering::isShuffleMaskLegal().
Also saves a few lines of code.
llvm-svn: 309085
-membedded-data changes the location of constant data from the .sdata to
the .rodata section. Previously it was (incorrectly) always located in the
.rodata section.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D35686
llvm-svn: 308758
Follow up to r306280 in Clang.
Enable IAS by default for Android MIPS64 (uses N64 ABI).
Differential Revision: https://reviews.llvm.org/D35482
llvm-svn: 308742
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
This patch adds handling of the `long_call`, `far`, and `near`
attributes passed by front-end. The patch depends on D35479.
Differential revision: https://reviews.llvm.org/D35480.
llvm-svn: 308606
Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
llvm-svn: 308595
This change introduces additional machine instructions in functions
dealing with the expansion of msa pseudo f16 instructions due to
register classes being inappropriate when checked with machine
verifier.
Differential Revision: https://reviews.llvm.org/D34276
llvm-svn: 308301
If the `long-calls` feature flags is enabled, disable use of the `jal`
instruction. Instead of that call a function by by first loading its
address into a register, and then using the contents of that register.
Differential revision: https://reviews.llvm.org/D35168
llvm-svn: 308087
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Function InRange is changed to avoid left shifting of negative values, since
that caused some sanitizer tests to fail (so the previous patch
Differential Revision: https://reviews.llvm.org/D34511
llvm-svn: 308011
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
The previous version of this patch was too aggressive in producing fused
integer multiple-addition instructions.
llvm-svn: 307906
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
This patch implements the .module and .set directives for the MT ASE,
notably that .module sets the relevant flags in .MIPS.abiflags and .set
doesn't.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35249
llvm-svn: 307716
Preparatory work for adding the MIPS MT (multi-threading) ASE instructions.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35247
llvm-svn: 307679
In particular, use CALL16 (similar to O32) for address loads into T9 for certain
cases. Otherwise use a %got_disp relocation to load the address of a symbol.
Small offsets (small enough to fit in a 16-bit signed immediate) can be used and
are added to the symbol address after it is loaded from the GOT. Larger offsets
are currently unsupported and result in an error from the assembler.
Reviewers: sdardis
Reviewed By: sdardis
Patch by: John Baldwin
Subscribers: llvm-commits, seanbruno, arichardson, emaste, dim
Differential Revision: https://reviews.llvm.org/D33948
llvm-svn: 306831
Add the instruction aliases for ds(r|l)l for the two operand alias
of ds(r|l)lv and the aliases ds(r|l)l with the three register operands.
llvm-svn: 306405
Borrow from the logic for 'jal' in MipsAsmParser::processInstruction
and add the extra condition of bypassing CALL16 if the destination symbol
is an ELF symbol with STB_LOCAL binding.
Patch by: John Baldwin
Reviewers: sdardis
Differential Revision: https://reviews.llvm.org/D33999
llvm-svn: 306387
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
After fixing (r306173) a failing test in the lld test suite (r306173),
reland r306095.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aui/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306174
ELF/mips-plt-r6.s in lld-test is failing. Reverting the change.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aut/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306099
Swapped the position of the rt and rs register in the aut/daui instructions
for mips32r6 and mips64r6. With this change, the format of the generated
instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D33988
llvm-svn: 306095
Before this change, it was always the first element of a vector that got splatted since the lower 6 bits of vshf.d $wd were always zero for little endian.
Additionally, masking has been performed for vshf via which splat.d is created.
Vshf has a property where if its first operand's elements have either bit 6 or 7 set, destination element is set to zero.
Initially masked with 63 to avoid this property, which would result in generation of and.v + vshf.d in all cases.
Masking with one results in generating a single splati.d instruction when possible.
Differential Revision: https://reviews.llvm.org/D32216
llvm-svn: 306090
This patch allows $AT to be used as a register name in assembly files.
Currently only $at is recognized as a valid register name.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34348
llvm-svn: 306007
Rather than creating a separate ".rdata" section distinct from the
customary ".rodata" in ELF, ".rdata" switches to the ".rodata" section.
This patch relands r305949 and r305950 with the correct commit message
and addresses nit raised during review.
Patch By: John Baldwin!
Differential Revision: https://reviews.llvm.org/D34452
llvm-svn: 305995
Krzysztof Parzyszek