To improve consistency and avoid unneeded shell feature (output
redirection).
While here, make other changes to improve consistency
--docnum 1 => --docnum=1
-docnum=x => --docnum=x
Summary:
This was reverted in 328e0f3dca due to
chromium bot failure. This revision addresses that case.
Original commit message:
Summary:
This patch will provide support for auto return type for the C++ member
functions. Before this return type of the member function is deduced and
stored in the DIE.
This patch includes llvm side implementation of this feature.
Patch by: Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: dblaikie, aprantl, shafik, alok, SouraVX, jini.susan.george
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D70524
[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
This reverts D53469, which changed llvm's DWARF emission to emit
DW_AT_call_return_pc as a function-local offset. Such an encoding is not
compatible with post-link block re-ordering tools and isn't standards-
compliant.
In addition to reverting back to the original DW_AT_call_return_pc
encoding, teach lldb how to fix up DW_AT_call_return_pc when the address
comes from an object file pointed-to by a debug map. While doing this I
noticed that lldb's support for tail calls that cross a DSO/object file
boundary wasn't covered, so I added tests for that. This latter case
exercises the newly added return PC fixup.
The dsymutil changes in this patch were originally included in D49887:
the associated test should be sufficient to test DW_AT_call_return_pc
encoding purely on the llvm side.
Differential Revision: https://reviews.llvm.org/D72489
When compiling position-independent executables, we now use
DW_EH_PE_pcrel | DW_EH_PE_sdata4. However, the MIPS ABI does not define a
64-bit PC-relative ELF relocation so we cannot use sdata8 for the large
code model case. When using the large code model, we fall back to the
previous behaviour of generating absolute relocations.
With this change clang-generated .o files can be linked by LLD without
having to pass -Wl,-z,notext (which creates text relocations).
This is simpler than the approach used by ld.bfd, which rewrites the
.eh_frame section to convert absolute relocations into relative references.
I saw in D13104 that apparently ld.bfd did not accept pc-relative relocations
for MIPS ouput at some point. However, I also checked that recent ld.bfd
can process the clang-generated .o files so this no longer seems true.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72228
Summary:
This patch will provide support for auto return type for the C++ member
functions. Before this return type of the member function is deduced and
stored in the DIE.
This patch includes llvm side implementation of this feature.
Patch by: Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: dblaikie, aprantl, shafik, alok, SouraVX, jini.susan.george
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D70524
Don't overwrite existing target-cpu attributes.
I've often found the replacement behavior annoying, and this is
inconsistent with how the fast math command line flags interact with
the function attributes.
Does not yet change target-features, since I think that should behave
as a concatenation.
Seeing some curious CFI failures internally - which makes little sense
to me, as I don't think anyone is using this flag (even us,
internally)... so sounds like a bug in my code somewhere (possibly a
latent one that propagating this flag exposed, not sure). Reverting
while I investigate.
This reverts commit c51b45e32e.
SelectionDAG::transferDbgValues() can 'reattach' SDDbgValue from one to
another node, but doesn't change its source order. If the destination node has
the order greater than the SDDbgValue, there are two possible issues
revealed later:
* If debug info is attached to an instruction that is the first definition
of a register, this ends up with a def-after-use and the debug info
gets 'undef' later.
* If MIR has another definition of a register above the debug info,
the debug info may represent a source variable incorrectly because
it appears (significantly) before an instruction corresponded
to this debug info.
So, the patch changes the order of an SDDbgValue when it is moved
to a node with greater order.
Reviewers: dblaikie, jmorse, aprantl
Reviewed By: aprantl
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71175
Tests "dwarfdump-rnglists-dwarf64.s" and "dwarfdump-rnglists.s" were
malformed because they had missing required DWO ID fields in split
compilation unit headers. The patch fixes the tests and checks
the reading of a unit header more thoroughly.
Differential Revision: https://reviews.llvm.org/D71704
It isn't necessary to create DIEs for all of the declaration subprograms
in a CU's retainedTypes list. We can defer creating these subprograms
until we need to prepare a call site tag that refers to one.
This cleanup was mentioned in passing in D70350.
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
Update:
Reland with a fix to create a declaration DIE when the declaration is
missing from the CU's retainedTypes list. The declaration is left out
of the retainedTypes list in two cases:
1) Re-compiling pre-r266445 bitcode (in which declarations weren't added
to the retainedTypes list), and
2) Doing LTO function importing (which doesn't update the retainedTypes
list).
It's possible to handle (1) and (2) by modifying the retainedTypes list
(in AutoUpgrade, or in the LTO importing logic resp.), but I don't see
an advantage to doing it this way, as it would cause more DWARF to be
emitted compared to creating the declaration DIEs lazily.
Tested with a stage2 ThinLTO+RelWithDebInfo build of clang, and with a
ReleaseLTO-g build of the test suite.
rdar://46577651, rdar://57855316, rdar://57840415
Differential Revision: https://reviews.llvm.org/D70350
Extends DWARF expression language to express locals/globals locations. (via
target-index operands atm) (possible variants are: non-virtual registers
or address spaces)
The WebAssemblyExplicitLocals can replace virtual registers to targertindex
operand type at the time when WebAssembly backend introduces
{get,set,tee}_local instead of corresponding virtual registers.
Reviewed By: aprantl, dschuff
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D52634
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Summary:
With -gdwarf-5 local variable locations are emitted as DW_FORM_loclistx
form instead of the regular DW_FORM_sec_offset. Teach
DWARFDie::getLocations to understand the new format and use it in
llvm-symbolizer "FRAME" command.
Reviewers: pcc, jdoerfert
Subscribers: srhines, aprantl, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70756
The calculator was considering instructions such as KILLs as clobbers
of a physical address. This is wrong as meta instructions such as KILLs
produce no output in the final program and thus don't clobber or change
any physical location's value. As a result they're safe to ignore whilst
calculating location list ranges.
reviewers: aprantl, vsk
diff revision: https://reviews.llvm.org/D70497
fixes: https://bugs.llvm.org/show_bug.cgi?id=38753
Since the address pool doesn't get populated in this case (due to the
lack of inlining, no child DIEs are added to the CU - so no addresses
are needed for the DIEs themselves) until the range list is emitted - at
the time the attributes are added to the CU, the address pool is empty.
So check whether the address pool will be used for the range lists & add
an addr_base if that's the case.
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.
The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.
There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
added a test case for macinfo.dwo emission."
This was reverted in caa4120906,
since it was causing an assertion failure on Windows bots.
This revision is revised to fix that.
Original commit message -
[DebugInfo] Refactored macro related generation, added a test case for macinfo.dwo emission.
Reviewers: dblaikie, aprantl, jini.susan.george
Tags: #debug-info #llvm
Differential Revision: https://reviews.llvm.org/D71008
Summary:
With DWARF5 it is no longer possible to distinguish normal methods and methods with `__attribute__((objc_direct))` by just looking at the debug information
as they are both now children of the of the DW_TAG_structure_type that defines them (before only the `__attribute__((objc_direct))` methods were children).
This means that in LLDB we are no longer able to create a correct Clang AST of a module by just looking at the debug information. Instead we would
need to call the Objective-C runtime to see which of the methods have a `__attribute__((objc_direct))` and then add the attribute to our own Clang AST
depending on what the runtime returns. This would mean that we either let the module AST be dependent on the Objective-C runtime (which doesn't
seem right) or we retroactively add the missing attribute to the imported AST in our expressions.
A third option is to annotate methods with `__attribute__((objc_direct))` as `DW_AT_APPLE_objc_direct` which is what this patch implements. This way
LLDB doesn't have to call the runtime for any `__attribute__((objc_direct))` method and the AST in our module will already be correct when we create it.
Reviewers: aprantl, SouraVX
Reviewed By: aprantl
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D71201
Summary:
In commit d60f34c20a (llvm-svn 317128,
PR35113) MergeBlockIntoPredecessor was changed into
discarding some dbg.value intrinsics referring to
PHI values, post-splice due to loop rotation.
That elimination of dbg.value intrinsics did not
consider which dbg.value to keep depending on the
context (e.g. if the variable is changing its value
several times inside the basic block).
In the past that hasn't been such a big problem since
CodeGenPrepare::placeDbgValues has moved the dbg.value
to be next to the PHI node anyway. But after commit
00e238896c CodeGenPrepare isn't doing that
any longer, so we need to be more careful when avoiding
duplicate dbg.value intrinsics in MergeBlockIntoPredecessor.
This patch replaces the code that tried to avoid duplicate
dbg.values by using the RemoveRedundantDbgInstrs helper.
Reviewers: aprantl, jmorse, vsk
Reviewed By: aprantl, vsk
Subscribers: jholewinski, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71480
The change allows clang -mno-omit-leaf-frame-pointer to disable frame
pointer elimination. This behavior matches X86 and Mips, and also GCC
AArch64.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D71168
Summary:
This is a quickfix for PR44275. An assertion that checks that the
DIExpression is valid failed due to attempting to create an entry value
for an indirect parameter. This started appearing after D69028, as the
indirect parameter started being represented using an DW_OP_deref,
rather than with the DBG_VALUE's second operand, meaning that the
isIndirectDebugValue() check in LiveDebugValues did not exclude such
parameters. A DIExpression that has an entry value operation can
currently not have any other operation, leading to the failed isValid()
check.
This patch simply makes us stop considering emitting entry values
for such parameters. To support such cases I think we at least need
to do the following changes:
* In DIExpression::isValid(): Remove the limitation that a
DW_OP_LLVM_entry_value operation can be the only operation in a
DIExpression.
* In LiveDebugValues::emitEntryValues(): Create an entry value of size
1, so that it only wraps the register operand, and not the whole
pre-existing expression (the DW_OP_deref).
* In LiveDebugValues::removeEntryValue(): Check that the new debug
value has the same debug expression as the original, rather than
checking that the debug expression is empty.
* In DwarfExpression::addMachineRegExpression(): Modify the logic so
that a DW_OP_reg* expression is emitted for the entry value.
That is how GCC emits entry values for indirect parameters. That will
currently not happen to due the DW_OP_deref causing the
!HasComplexExpression to fail. The LocationKind needs to be changed
also, rather than always emitting a DW_OP_stack_value for entry values.
There are probably more things I have missed, but that could hopefully
be a good starting point for emitting such entry values.
Reviewers: djtodoro, aprantl, jmorse, vsk
Reviewed By: aprantl, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D71416
That patch adds checking into DWARFVerifier that the Skeleton
compilation unit does not have children.
Differential Revision: https://reviews.llvm.org/D71244
This reverts commit 30038da15b. It causes
the stage2 thinLTO bot to fail with:
Assertion failed: (CU.getDIE(CalleeSP) && "Expected declaration subprogram DIE for callee")
rdar://57840415
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
rdar://46577651
Differential Revision: https://reviews.llvm.org/D70350
This caused non-determinism in the compiler, see command on the Phabricator
code review.
> This patch addresses a performance problem reported in PR43855, and
> present in the reapplication in in 001574938e5. It turns out that
> MachineSink will (often) move instructions to the first block that
> post-dominates the current block, and then try to sink further. This
> means if we have a lot of conditionals, we can needlessly create large
> numbers of DBG_VALUEs, one in each block the sunk instruction passes
> through.
>
> To fix this, rather than immediately sinking DBG_VALUEs, record them in
> a pass structure. When sinking is complete and instructions won't be
> sunk any further, new DBG_VALUEs are added, avoiding lots of
> intermediate DBG_VALUE $noregs being created.
>
> Differential revision: https://reviews.llvm.org/D70676
CodeGenPrepare::placeDebugValues moves variable location intrinsics to be
immediately after the Value they refer to. This makes tracking of locations
very easy; but it changes the order in which assignments appear to the
debugger, from the source programs order to the order in which the
optimised program computes values. This then leads to PR43986 and PR38754,
where variable locations that were in a conditional block are made
unconditional, which is highly misleading.
This patch adjusts placeDbgValues to only re-order variable location
intrinsics if they use a Value before it is defined, significantly reducing
the damage that it does. This is still not 100% safe, but the rest of
CodeGenPrepare needs polishing to correctly update debug info when
optimisations are performed to fully fix this.
This will probably break downstream debuginfo tests -- if the
instruction-stream position of variable location changes isn't the focus of
the test, an easy fix should be to manually apply placeDbgValues' behaviour
to the failing tests, moving dbg.value intrinsics next to SSA variable
definitions thus:
%foo = inst1
%bar = ...
%baz = ...
void call @llvm.dbg.value(metadata i32 %foo, ...
to
%foo = inst1
void call @llvm.dbg.value(metadata i32 %foo, ...
%bar = ...
%baz = ...
This should return your test to exercising whatever it was testing before.
Differential Revision: https://reviews.llvm.org/D58453
Mostly this adds testing for certain aliases in more explicit ways.
There are also a few tidy-ups, and additions of missing testing, where
the feature was either not tested at all, or not tested explicitly and
sufficiently.
Reviewed by: MaskRay, rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D71116
Summary:
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes situations in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: ormris, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70431
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes a case in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
One of CodeGenPrepare's optimizations is to duplicate address calculations
into basic blocks, so that as much information as possible can be folded
into memory addressing operands. This is great -- but the dbg.value
variable location intrinsics are not updated in the same way. This can lead
to dbg.values referring to address computations in other blocks that will
never be encoded into the DAG, while duplicate address computations are
performed locally that could be used by the dbg.value. Some of these (such
as non-constant-offset GEPs) can't be salvaged past.
Fix this by, whenever we duplicate an address computation into a block,
looking for dbg.value users of the original memory address in the same
block, and redirecting those to the local computation.
Differential Revision: https://reviews.llvm.org/D58403
This patch addresses a performance problem reported in PR43855, and
present in the reapplication in in 001574938e5. It turns out that
MachineSink will (often) move instructions to the first block that
post-dominates the current block, and then try to sink further. This
means if we have a lot of conditionals, we can needlessly create large
numbers of DBG_VALUEs, one in each block the sunk instruction passes
through.
To fix this, rather than immediately sinking DBG_VALUEs, record them in
a pass structure. When sinking is complete and instructions won't be
sunk any further, new DBG_VALUEs are added, avoiding lots of
intermediate DBG_VALUE $noregs being created.
Differential revision: https://reviews.llvm.org/D70676
Fix part of PR43855, resolving a problem that comes from the reapplication
in 001574938e5. If we have two DBG_VALUE insts in a block that specify
the location of the same variable, for example:
%0 = someinst
DBG_VALUE %0, !123, !DIExpression()
%1 = anotherinst
DBG_VALUE %1, !123, !DIExpression()
if %0 were to sink, the corresponding DBG_VALUE would sink too, past the
next DBG_VALUE, effectively re-ordering assignments. To fix this, I've
added a SeenDbgVars set recording what variable locations have been seen in
a block already (working bottom up), and now flag DBG_VALUEs that would
pass a later DBG_VALUE for the same variable.
NB, this only works for repeated DBG_VALUEs in the same basic block, the
general case involving control flow is much harder, which I've written
up in PR44117.
Differential revision: https://reviews.llvm.org/D70672
These were:
* D58386 / f5e1b718a6 / reverted in d382a8a768
* D58238 / ee50590e16 / reverted in a8db456b53
Of which the latter has a performance regression tracked in PR43855,
fixed by D70672 / D70676, which will be committed atomically with this
reapplication.
Contains a minor difference to account for a change in the IsCopyInstr
signature.
Summary:
Currently these function return the raw content of the appropriate table
header, which means they are relative to the DW_AT_{loc,rng}list_base,
and one has to relocate them in order to do anything.
This changes the functions to perform the relocation themselves, which
seems more clearer, particularly as they are sitting right next to the
find{Rng,Loc}listFromOffset functions, but one *cannot* simply take the
result of these functions and take pass them there.
The only effect of this patch is to change what value is dumped for the
DW_AT_ranges attribute, which I think is for the better, as previously
the values appeared to point into thin air.
(The main reason I am looking at this is because I was trying to
implement equivalent functionality in lldb's DWARFUnit, and was stumped
by this behavior.
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, llvm-commits, SouraVX
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71006
Summary:
If a call is bundled then the code that looks for instructions that
produce parameter values would break when reaching the call's bundle
header, due to the `ifCall(/*AnyInBundle*/)` invocation returning true.
It is not enough to simply ignore bundle headers in the `isCall()`
invocation, as the bundle header may have defines of parameter registers
due to the call, meaning that such registers would incorrectly be
removed from the worklist. Therefore, do not look at bundle headers at
all.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D71024
Build ID is a protocol for looking up debug files that's already
supported by various tools including debuggers. For example, when
locating debug files, gdb would check the following directories:
- /usr/lib/debug/.build-id/ab/cdef1234.debug
- /usr/bin/ls.debug
- /usr/bin/.debug/ls.debug
- /usr/lib/debug/usr/bin/ls.debug
llvm-symbolizer currently consults all of these except for build ID
based one. This patch implements support for build ID lookup. The
set of debug directories to search is specified by the new option:
--debug-file-directory, whose name matches the debug-file-directory
variable used by gdb for the same purpose.
Differential Revision: https://reviews.llvm.org/D70759
That patch fixes incompatible compilation unit type (DW_UT_skeleton) and root DIE (DW_TAG_compile_unit) error.
cat split-dwarf.cpp
int main()
{
int a = 1;
return 0;
}
clang++ -O -g -gsplit-dwarf -gdwarf-5 split-dwarf.cpp; llvm-dwarfdump --verify ./a.out | grep skeleton
error: Compilation unit type (DW_UT_skeleton) and root DIE (DW_TAG_compile_unit) do not match.
The fix is to change DW_TAG_compile_unit into DW_TAG_skeleton_unit when skeleton file is generated.
Differential Revision: https://reviews.llvm.org/D70880
Summary:
This does exactly what it says on the box. The only small gotcha is the
section index computation for offset_pair entries, which can use either
the base address section, or the section from the offset_pair entry.
This is to support both the cases where the base address is relocated
(points to the base of the CU, typically), and the case where the base
address is a constant (typically zero) and relocations are on the
offsets themselves.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits, probinson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70540
The idea is to remove front-end analysis for the parameter's value
modification and leave it to the value tracking system. Front-end in some
cases marks a parameter as modified even the line of code that modifies the
parameter gets optimized, that implies that this will cover more entry
values even. In addition, extending the support for modified parameters
will be easier with this approach.
Since the goal is to recognize if a parameter’s value has changed, the idea
at very high level is: If we encounter a DBG_VALUE other than the entry
value one describing the same variable (parameter), we can assume that the
variable’s value has changed and we should not track its entry value any
more. That would be ideal scenario, but due to various LLVM optimizations,
a variable’s value could be just moved around from one register to another
(and there will be additional DBG_VALUEs describing the same variable), so
we have to recognize such situation (otherwise, we will lose a lot of entry
values) and salvage the debug entry value.
Differential Revision: https://reviews.llvm.org/D68209
This revision is revised to update Go-bindings and Release Notes.
The original commit message follows.
This patch, adds support for DW_AT_alignment[DWARF5] attribute, to be emitted with typdef DIE.
When explicit alignment is specified.
Patch by Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: aprantl, dblaikie, jini.susan.george, SouraVX, alok,
deadalinx
Differential Revision: https://reviews.llvm.org/D70111
This patch adds support for debug_macinfo.dwo section[pre-standardized]
to llvm and llvm-dwarfdump.
Reviewers: probinson, dblaikie, aprantl, jini.susan.george, alok
Differential Revision: https://reviews.llvm.org/D70705
Tags: #debug-info #llvm
This is a re-land of D56151 / r364515 with a completely new implementation.
Once MIR code leaves SSA form and the liveness of a vreg is considered,
DBG_VALUE insts are able to refer to non-live vregs, because their
debug-uses do not contribute to liveness. This non-liveness becomes
problematic for optimizations like register coalescing, as they can't
``see'' the debug uses in the liveness analyses.
As a result registers get coalesced regardless of debug uses, and that can
lead to invalid variable locations containing unexpected values. In the
added test case, the first vreg operand of ADD32rr is merged with various
copies of the vreg (great for performance), but a DBG_VALUE of the
unmodified operand is blindly updated to the modified operand. This changes
what value the variable will appear to have in a debugger.
Fix this by changing any DBG_VALUE whose operand will be resurrected by
register coalescing to be a $noreg DBG_VALUE, i.e. give the variable no
location. This is an overapproximation as some coalesced locations are safe
(others are not) -- an extra domination analysis would be required to work
out which, and it would be better if we just don't generate non-live
DBG_VALUEs.
Differential Revision: https://reviews.llvm.org/D64630
Summary:
Related bug: https://bugs.llvm.org/show_bug.cgi?id=40648
Static helper function rewriteDebugUsers in Local.cpp deletes dbg.value
intrinsics when it cannot move or rewrite them, or salvage the deleted
instruction's value. It should instead undef them in this case.
This patch fixes that and I've added a test which covers the failing test
case in bz40648. I've updated the unit test Local.ReplaceAllDbgUsesWith
to check for this behaviour (and fixed a typo in the test which would
cause the old test to always pass).
Reviewers: aprantl, vsk, djtodoro, probinson
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70604
Summary: Add support for resolving `R_RISCV_32_PCREL` relocations. Those aren't
actually resolved AFAIK, but support is still needed to avoid llvm-dwarfdump
errors. The use of these relocations was introduced in D66419 but the
corresponding resolving wasn't added then. The test adds a check that should
catch future unresolved relocations.
Reviewers: asb, lenary
Reviewed By: asb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70204
DwarfExpression::addMachineReg() knows how to build a larger register
that isn't expressible in DWARF by combining multiple
subregisters. However, if the entire value fits into just one
subregister, it would still emit the other subregisters, leading to
all sorts of inconsistencies down the line.
This patch fixes that by moving an already existing(!) check whether
the subregister's offset is before the end of the value to the right
place.
rdar://problem/57294211
Differential Revision: https://reviews.llvm.org/D70508
Currently, clang emits subprograms for declared functions when the
target debugger or DWARF standard is known to support entry values
(DW_OP_entry_value & the GNU equivalent).
Treat DW_AT_tail_call the same way to allow debuggers to follow cross-TU
tail calls.
Pre-patch debug session with a cross-TU tail call:
```
* frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
frame #1: 0x0000000100000f99 main`main at a.c:8:10 [opt]
```
Post-patch (note that the tail-calling frame, "helper", is visible):
```
* frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
frame #1: 0x0000000100000f80 main`helper [opt] [artificial]
frame #2: 0x0000000100000f99 main`main at a.c:8:10 [opt]
```
This was reverted in 5b9a072c because it attached declaration
subprograms to inlinable builtin calls, which interacted badly with the
MergeICmps pass. The fix is to not attach declarations to builtins.
rdar://46577651
Differential Revision: https://reviews.llvm.org/D69743
A call site parameter description of a memory operand needs to
unambiguously convey the size of the operand to prevent incorrect entry
value evaluation.
Thanks for David Stenberg for pointing this issue out!
Summary:
Assert in getFunctionLocalOffsetAfterInsn() fails when processing a call
MachineInstr inside a bundle and compiling with debug info. This is
because labels are added by DwarfDebug::beginInstruction() which is
called for each top-level MI by EmitFunctionBody()'s for-loop iteration
but constructCallSiteEntryDIEs() which calls
getFunctionLocalOffsetAfterInsn() iterates over all MIs.
This commit modifies constructCallSiteEntryDIEs() to get the associated
bundle MI for call MIs inside a bundle and use that to when calling
getFunctionLocalOffsetAfterInsn() and getLabelAfterInsn(). It also skips
loop iterations for bundle MIs since the loop statements are concerned
with debug info for each physical instructions and bundles represent a
group of instructions. It also fix the comment about PCAddr since the
code is getting the return address and not the call address.
Reviewers: dstenb, vsk, aprantl, djtodoro, dblaikie, NikolaPrica
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70293
This reapplies c0f6ad7d1f with an
additional fix in test/DebugInfo/X86/constant-loclist.ll, which had a
slightly different output on windows targets. The test now accounts for
this difference.
The original commit message follows.
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
This patch, adds support for DW_AT_alignment[DWARF5] attribute, to be emitted with typdef DIE.
When explicit alignment is specified.
Patch by Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: aprantl, dblaikie, jini.susan.george, SouraVX, alok,
deadalinx
Differential Revision: https://reviews.llvm.org/D70111
Summary:
This adds a visitLocationList function to the DWARF v4 location lists,
similar to what already exists for DWARF v5. It follows the approach
outlined in previous patches (D69672), where the parsed form is always
stored in the DWARF v5 format, which makes it easier for generic code to
be built on top of that. v4 location lists are "upgraded" during
parsing, and then this upgrade is undone while dumping.
Both "inline" and section-based dumping is rewritten to reuse the
existing "generic" location list dumper. This means that the output
format is consistent for all location lists (the only thing one needs to
implement is the function which prints the "raw" form of a location
list), and that debug_loc dumping correctly processes base address
selection entries, etc.
The previous existing debug_loc functionality (e.g.,
parseOneLocationList) is rewritten on top of the new API, but it is not
removed as there is still code which uses them. This will be done in
follow-up patches, after I build the API to access the "interpreted"
location lists in a generic way (as that is what those users really
want).
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69847
Allow call site paramter descriptions to reference spill slots. Spill
slots are not visible to high-level LLVM IR, so they can safely be
referenced during entry value evaluation (as they cannot be clobbered by
some other function).
This gives a 5% increase in the number of call site parameter DIEs in an
LTO x86_64 build of the xnu kernel.
This reverts commit eb4c98ca3d (
[DebugInfo] Exclude memory location values as parameter entry values),
effectively reintroducing the portion of D60716 which dealt with memory
locations (authored by Djordje, Nikola, Ananth, and Ivan).
This partially addresses llvm.org/PR43343. However, not all memory
operands forwarded to callees live in spill slots. In the xnu build, it
may be possible to use an escape analysis to increase the number of call
site parameter by another 15% (more details in PR43343).
Differential Revision: https://reviews.llvm.org/D70254
Summary: Removes CFI CFA directives that could incorrectly propagate
beyond the basic block they were inteded for. Specifically it removes
the epilogue CFI directives. See the branch_and_tail_call test for an
example of the issue. Should fix the stack unwinding issues caused by
the incorrect directives.
Reviewers: asb, lenary, shiva0217
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69723
Summary:
This removes the use of zero as a base address in section-based dumping.
Although this will often be true for (unlinked) object files with a
single compile unit, it is not true in general. This means that
section-based dumping will not be able to resolve entries referencing
the base address (DW_LLE_offset_pair) -- it wasn't able to do that
correctly before either, but now it will be more explicit about it. One
exception to that is if the location list contains an explicit
DW_LLE_base_address entry -- in this case the dumper will pick it up,
and resolve subsequent entries normally.
The patch also removes the fallback to zero in the "inline" dumping in
case the compile unit does not contain a base address.
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70115
Summary:
Entry values are considered for parameters that have register-described
DBG_VALUEs in the entry block (along with other conditions).
If a parameter's value has been propagated from the caller to the
callee, then the parameter's DBG_VALUE in the entry block may be
described using a register defined by some instruction, and entry values
should not be emitted for the parameter, which can currently occur.
One such case was seen in the attached test case, in which the second
parameter, which is described by a redefinition of the first parameter's
register, would incorrectly get an entry value using the first
parameter's register. This commit intends to solve such cases by keeping
track of register defines, and ignoring DBG_VALUEs in the entry block
that are described by such registers.
In a RelWithDebInfo build of clang-8, the average size of the set was
27, and in a RelWithDebInfo+ASan build it was 30.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D69889
Summary:
This patch extracts the logic for computing the "absolute" locations,
which was partially present in the debug_loclists dumper, completes it,
and moves it into a separate function. This makes it possible to later
reuse the same logic for uses other than dumping.
The dumper is changed to reuse the location list interpreter, and its
format is changed somewhat. In "verbose" mode it prints the "raw" value
of a location list, the interpreted location (if available) and the
expression itself. In non-verbose mode it prints only one of the
location forms: it prefers the interpreted form, but falls back to the
"raw" format if interpretation is not possible (for instance, because we
were not given a base address, or the resolution of indirect addresses
failed).
This patch also undos some of the changes made in D69672, namely the
part about making all functions static. The main reason for this is that
I learned that the original approach (dumping only fully resolved
locations) meant that it was impossible to rewrite one of the existing
tests. To make that possible (and make the "inline location" dump work
in more cases), I now reuse the same dumping mechanism as is used for
section-based dumping. As this required having more objects know about
the various location lists classes, it seemed like a good idea to create
an interface abstracting the difference between them.
Therefore, I now create a DWARFLocationTable class, which will serve as
a base class for the location list classes. DWARFDebugLoclists is made
to inherit from that. DWARFDebugLoc will follow.
Another positive effect of this change is that section-based dumping
code will not need to use templates (as originally) envisioned, and that
the argument lists of the dumping functions become shorter.
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70081
This was arbitrarily appearing in only the last section emitted - which
made tests more sensitive than they needed to be (removing the last
section - like the macinfo section change that's coming after this)
would, surprisingly, move the blank line to the previous section.
The macinfo support was broken for LTO situations, by terminating
macinfo lists only once - multiple macinfo contributions were correctly
labeled, but they all continued/flowed into later contributions until
only one terminator appeared at the end of the section.
Correctly terminate each contribution & fix the parsing to handle this
situation too. The parsing fix is also necessary for dumping linked
binaries - the previous code would stop at the end of the first
contribution - missing all later contributions in a linked binary.
It'd be nice to improve the dumping to print the offsets of each
contribution so it'd be easier to know which CU AT_macro_info refers to
which macinfo contribution.
This triggered asserts in the Chromium build, see https://crbug.com/1022729 for
details and reproducer.
> Without this change, when a nested tag type of any kind (enum, class,
> struct, union) is used as a variable type, it is emitted without
> emitting the parent type. In CodeView, parent types point to their inner
> types, and inner types do not point back to their parents. We already
> walk over all of the parent scopes to build the fully qualified name.
> This change simply requests their type indices as we go along to enusre
> they are all emitted.
>
> Fixes PR43905
>
> Reviewers: akhuang, amccarth
>
> Differential Revision: https://reviews.llvm.org/D69924
Without this change, when a nested tag type of any kind (enum, class,
struct, union) is used as a variable type, it is emitted without
emitting the parent type. In CodeView, parent types point to their inner
types, and inner types do not point back to their parents. We already
walk over all of the parent scopes to build the fully qualified name.
This change simply requests their type indices as we go along to enusre
they are all emitted.
Fixes PR43905
Reviewers: akhuang, amccarth
Differential Revision: https://reviews.llvm.org/D69924
This caused Chromium builds to fail with "inlinable function call in a function
with debug info must have a !dbg location" errors. See
https://bugs.chromium.org/p/chromium/issues/detail?id=1022296#c1 for a
reproducer.
> Currently, clang emits subprograms for declared functions when the
> target debugger or DWARF standard is known to support entry values
> (DW_OP_entry_value & the GNU equivalent).
>
> Treat DW_AT_tail_call the same way to allow debuggers to follow cross-TU
> tail calls.
>
> Pre-patch debug session with a cross-TU tail call:
>
> ```
> * frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
> frame #1: 0x0000000100000f99 main`main at a.c:8:10 [opt]
> ```
>
> Post-patch (note that the tail-calling frame, "helper", is visible):
>
> ```
> * frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
> frame #1: 0x0000000100000f80 main`helper [opt] [artificial]
> frame #2: 0x0000000100000f99 main`main at a.c:8:10 [opt]
> ```
>
> rdar://46577651
>
> Differential Revision: https://reviews.llvm.org/D69743
Summary:
This patch stems from the discussion D68270 (including some offline
talks). The idea is to provide an "incremental" api for parsing location
lists, which will avoid caching or materializing parsed data. An
additional goal is to provide a high level location list api, which
abstracts the differences between different encoding schemes, and can be
used by users which don't care about those (such as LLDB).
This patch implements the first part. It implements a call-back based
"visitLocationList" api. This function parses a single location list,
calling a user-specified callback for each entry. This is going to be
the base api, which other location list functions (right now, just the
dumping code) are going to be based on.
Future patches will do something similar for the v4 location lists, and
add a mechanism to translate raw entries into concrete address ranges.
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69672
Currently, clang emits subprograms for declared functions when the
target debugger or DWARF standard is known to support entry values
(DW_OP_entry_value & the GNU equivalent).
Treat DW_AT_tail_call the same way to allow debuggers to follow cross-TU
tail calls.
Pre-patch debug session with a cross-TU tail call:
```
* frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
frame #1: 0x0000000100000f99 main`main at a.c:8:10 [opt]
```
Post-patch (note that the tail-calling frame, "helper", is visible):
```
* frame #0: 0x0000000100000fa4 main`target at b.c:4:3 [opt]
frame #1: 0x0000000100000f80 main`helper [opt] [artificial]
frame #2: 0x0000000100000f99 main`main at a.c:8:10 [opt]
```
rdar://46577651
Differential Revision: https://reviews.llvm.org/D69743
Fangrui Song