Conversion to the LLVM dialect is being refactored to be more progressive and
is now performed as a series of independent passes converting different
dialects. These passes may produce `unrealized_conversion_cast` operations that
represent pending conversions between built-in and LLVM dialect types.
Historically, a more monolithic Standard-to-LLVM conversion pass did not need
these casts as all operations were converted in one shot. Previous refactorings
have led to the requirement of running the Standard-to-LLVM conversion pass to
clean up `unrealized_conversion_cast`s even though the IR had no standard
operations in it. The pass must have been also run the last among all to-LLVM
passes, in contradiction with the partial conversion logic. Additionally, the
way it was set up could produce invalid operations by removing casts between
LLVM and built-in types even when the consumer did not accept the uncasted
type, or could lead to cryptic conversion errors (recursive application of the
rewrite pattern on `unrealized_conversion_cast` as a means to indicate failure
to eliminate casts).
In fact, the need to eliminate A->B->A `unrealized_conversion_cast`s is not
specific to to-LLVM conversions and can be factored out into a separate type
reconciliation pass, which is achieved in this commit. While the cast operation
itself has a folder pattern, it is insufficient in most conversion passes as
the folder only applies to the second cast. Without complex legality setup in
the conversion target, the conversion infra will either consider the cast
operations valid and not fold them (a separate canonicalization would be
necessary to trigger the folding), or consider the first cast invalid upon
generation and stop with error. The pattern provided by the reconciliation pass
applies to the first cast operation instead. Furthermore, having a separate
pass makes it clear when `unrealized_conversion_cast`s could not have been
eliminated since it is the only reason why this pass can fail.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D109507
This makes the IR more readable, in particular when this will be used on
the builtin func outside of the LLVM dialect.
Reviewed By: wsmoses
Differential Revision: https://reviews.llvm.org/D109209
The translation to LLVM IR used to construct sequential constants by recurring
down to individual elements, creating constant values for them, and wrapping
them into aggregate constants in post-order. This is highly inefficient for
large constants with known data such as DenseElementsAttr. Use LLVM's
ConstantData for the innermost dimension instead. LLVM does seem to support
data constants for nested sequential constants so the outer dimensions are
still handled recursively. Nevertheless, this speeds up the translation of
large constants with equal dimensions by up to 30x.
Users are advised to rewrite large constants to use flat types before
translating to LLVM IR if more efficiency in translation is necessary. This is
not done automatically as the translation is not aware of the expectations of
the overall compilation flow about type changes and indexing, in particular for
global constants with external linkage.
Reviewed By: silvas
Differential Revision: https://reviews.llvm.org/D109152
Add an operation omp.critical.declare to declare names/symbols of
critical sections. Named omp.critical operations should use symbols
declared by omp.critical.declare. Having a declare operation ensures
that the names of critical sections are global and unique. In the
lowering flow to LLVM IR, the OpenMP IRBuilder creates unique names
for critical sections.
Reviewed By: ftynse, jeanPerier
Differential Revision: https://reviews.llvm.org/D108713
This upstreams the Cpp emitter, initially presented with [1], from [2]
to MLIR core. Together with the previously upstreamed EmitC dialect [3],
the target allows to translate MLIR to C/C++.
[1] https://reviews.llvm.org/D76571
[2] https://github.com/iml130/mlir-emitc
[3] https://reviews.llvm.org/D103969
Co-authored-by: Jacques Pienaar <jpienaar@google.com>
Co-authored-by: Simon Camphausen <simon.camphausen@iml.fraunhofer.de>
Co-authored-by: Oliver Scherf <oliver.scherf@iml.fraunhofer.de>
Reviewed By: jpienaar
Differential Revision: https://reviews.llvm.org/D104632
Use the recently introduced OpenMPIRBuilder facility to transate OpenMP
workshare loops with reductions to LLVM IR calling OpenMP runtime. Most of the
heavy lifting is done at the OpenMPIRBuilder. When other OpenMP dialect
constructs grow support for reductions, the translation can be updated to
operate on, e.g., an operation interface for all reduction containers instead
of workshare loops specifically. Designing such a generic translation for the
single operation that currently supports reductions is premature since we don't
know how the reduction modeling itself will be generalized.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D107343
Introduces new Ops to represent 1. alias.scope metadata in LLVM, and 2. domains for these scopes. These correspond to the metadata described in https://llvm.org/docs/LangRef.html#noalias-and-alias-scope-metadata. Lists of scopes are modeled the same way as access groups - as an ArrayAttr on the Op (added in https://reviews.llvm.org/D97944).
Lowering 'noalias' attributes on function parameters is already supported. However, lowering `noalias` metadata on individual Ops is not, which is added in this change. LLVM uses the same keyword for these, but this change introduces a separate attribute name 'noalias_scopes' to represent this distinct concept.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D107870
This reverts the revert 28c04794df.
The failing MLIR test that caused the revert should be fixed in this
version.
Also includes a PPC test fix previously in 1f87c7c478.
This patch adds the critical construct to the OpenMP dialect. The
implementation models the definition in 2.17.1 of the OpenMP 5 standard.
A name and hint can be specified. The name is a global entity or has
external linkage, it is modelled as a FlatSymbolRefAttr. Hint is
modelled as an integer enum attribute.
Also lowering to LLVM IR using the OpenMP IRBuilder.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D107135
Use a modeling similar to SCF ParallelOp to support arbitrary parallel
reductions. The two main differences are: (1) reductions are named and declared
beforehand similarly to functions using a special op that provides the neutral
element, the reduction code and optionally the atomic reduction code; (2)
reductions go through memory instead because this is closer to the OpenMP
semantics.
See https://llvm.discourse.group/t/rfc-openmp-reduction-support/3367.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D105358
LLVM IR allows globals with external linkage to have initializers, including
undef. The translation was incorrectly using undef as a indicator that the
initializer should be ignored in translation, leading to the impossibility to
create an external global with an explicit undef initializer. Fix this and use
nullptr as a marker instead.
Reviewed By: wsmoses
Differential Revision: https://reviews.llvm.org/D105631
This patch brings support for setting runtime preemption specifiers of
LLVM's GlobalValues. In LLVM semantics, if the `dso_local` attribute
is not explicitly requested, then it is inferred based on linkage and
visibility. We model this same behavior with a UnitAttribute: if it is
present, then we explicitly request the GlobalValue to marked as
`dso_local`, otherwise we rely on the GlobalValue itself to make this
decision.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D104983
This adds Sdot2d op, which is similar to the usual Neon
intrinsic except that it takes 2d vector operands, reflecting the
structure of the arithmetic that it's performing: 4 separate
4-dimensional dot products, whence the vector<4x4xi8> shape.
This also adds a new pass, arm-neon-2d-to-intr, lowering
this new 2d op to the 1d intrinsic.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D102504
ArmSVE-specific memory operations are needed to generate end-to-end
code for as long as MLIR core doesn't support scalable vectors. This
instructions will be eventually unnecessary, for now they're required
for more complex testing.
Differential Revision: https://reviews.llvm.org/D103535
These `arm_sve.cmp` functions are needed to generate scalable vector
masks as long as scalable vectors are not part of the standard types.
Once in standard, these can be removed and `std.cmp` can be used
instead.
Differential Revision: https://reviews.llvm.org/D103473
These `arm_sve.cmp` functions are needed to generate scalable vector
masks as long as scalable vectors are not part of the standard types.
Once in standard, these can be removed and `std.cmp` can be used
instead.
Differential Revision: https://reviews.llvm.org/D103473
Add translation to LLVM IR for the UpdateOp with host and device operands.
Translation is done with call using the runtime. This is done in a similar way as
D101504 and D102381.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D102382
Translate ExitDataOp with delete and copyout operands to runtime call.
This is done in a similar way as D101504.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D102381
Support OpImageQuerySize in spirv dialect
co-authored-by: Alan Liu <alanliu.yf@gmail.com>
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D102029
This patch begins to translate acc.enter_data operation to call to tgt runtime call.
It currently only translate create/copyin operands of memref type. This acts as a basis to add support
for FIR types in the Flang/OpenACC support. It follows more or less a similar path than clang
with `omp target enter data map` directives.
This patch is taking a different approach than D100678 and perform a translation to LLVM IR
and make use of the OpenMPIRBuilder instead of doing a conversion to the LLVMIR dialect.
OpenACC support in Flang will rely on the current OpenMP runtime where 1:1 lowering can be
applied. Some extension will be added where features are not available yet.
Big part of this code will be shared for other standalone data operations in the OpenACC
dialect such as acc.exit_data and acc.update.
It is likely that parts of the lowering can also be shared later with the ops for
standalone data directives in the OpenMP dialect when they are introduced.
This is an initial translation and it probably needs more work.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D101504
First step in adding alignment as an attribute to MLIR global definitions. Alignment can be specified for global objects in LLVM IR. It can also be specified as a named attribute in the LLVMIR dialect of MLIR. However, this attribute has no standing and is discarded during translation from MLIR to LLVM IR. This patch does two things: First, it adds the attribute to the syntax of the llvm.mlir.global operation, and by doing this it also adds accessors and verifications. The syntax is "align=XX" (with XX being an integer), placed right after the value of the operation. Second, it allows transforming this operation to and from LLVM IR. It is checked whether the value is an integer power of 2.
Reviewed By: ftynse, mehdi_amini
Differential Revision: https://reviews.llvm.org/D101492
When using parallel loop construct, the OpenMP specification allows for
guided, auto and runtime as scheduling variants (as well as static and
dynamic which are already supported).
This adds the translation from MLIR to LLVM-IR for these scheduling
variants.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D101435
Previously, the OpenMP to LLVM IR conversion was setting the alloca insertion
point to the same position as the main compuation when converting OpenMP
`parallel` operations. This is problematic if, for example, the `parallel`
operation is placed inside a loop and would keep allocating on stack on each
iteration leading to stack overflow.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D101307
Implements proper (de-)serialization logic for BranchConditionalOp when
such ops have true/false target operands.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D101602
These instructions map to SVE-specific instrinsics that accept a
predicate operand to support control flow in vector code.
Differential Revision: https://reviews.llvm.org/D100982
While we figure out how to best add Standard support for scalable
vectors, these instructions provide a workaround for basic arithmetic
between scalable vectors.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D100837
Add a section attribute to LLVM_GlobalOp, during module translation attribute value is propagated to llvm
Reviewed By: sgrechanik, ftynse, mehdi_amini
Differential Revision: https://reviews.llvm.org/D100947
This patch add the UnnamedAddr attribute for the GlobalOp in the LLVM
dialect. The attribute is also handled to and from LLVM IR.
This is meant to be used in a follow up patch to lower OpenACC/OpenMP ops to
call to kmp and tgt runtime calls (D100678).
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D100677
ArmSVE dialect is behind the recent changes in how the Vector dialect
interacts with backend vector dialects and the MLIR -> LLVM IR
translation module. This patch cleans up ArmSVE initialization within
Vector and removes the need for an LLVMArmSVE dialect.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D100171
We will soon be adding non-AVX512 operations to MLIR, such as AVX's rsqrt. In https://reviews.llvm.org/D99818 several possibilities were discussed, namely to (1) add non-AVX512 ops to the AVX512 dialect, (2) add more dialects (e.g. AVX dialect for AVX rsqrt), and (3) expand the scope of the AVX512 to include these SIMD x86 ops, thereby renaming the dialect to something more accurate such as X86Vector.
Consensus was reached on option (3), which this patch implements.
Reviewed By: aartbik, ftynse, nicolasvasilache
Differential Revision: https://reviews.llvm.org/D100119
This patch doesn't support the optional operands of ImageDrefGather. The support of optional operands will be implemented later.
co-authered-by: Alan Liu <alanliu.yf@gmail.com>
Differential Revision: https://reviews.llvm.org/D100128
In case an operation in a global initializer region refers to another
global variable defined afterwards in the module of itself, translation
to LLVM IR was currently crashing because it could not find the LLVM IR global
when going through the initializer block.
To solve this problem, split global conversion to LLVM IR into two passes. A
first pass that creates LLVM IR global variables, and a second one that converts
the initializer, if any, and adds it to the llvm global.
Differential Revision: https://reviews.llvm.org/D99246
The Intel Advanced Matrix Extensions (AMX) provides a tile matrix
multiply unit (TMUL), a tile control register (TILECFG), and eight
tile registers TMM0 through TMM7 (TILEDATA). This new MLIR dialect
provides a bridge between MLIR concepts like vectors and memrefs
and the lower level LLVM IR details of AMX.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D98470
The dialect separation was introduced to demarkate ops operating in different
type systems. This is no longer the case after the LLVM dialect has migrated to
using built-in vector types, so the original reason for separation is no longer
valid. Squash the two dialects into one.
The code size decrease isn't quite large: the ops originally in LLVM_AVX512 are
preserved because they match LLVM IR intrinsics specialized for vector element
bitwidth. However, it is still conceptually beneficial to have only one
dialect. I originally considered to use Tablegen multiclasses to define both
the type-polymorphic op and its two intrinsic-related instantiations, but
decided against it given both the complexity of the required Tablegen input and
its dissimilarity with the rest of ODS-defined ops, both potentially resulting
in very poor maintainability.
Depends On D98327
Reviewed By: nicolasvasilache, springerm
Differential Revision: https://reviews.llvm.org/D98328
Instead of storing an array of LoopOpt attributes, which were just
wrapping std::pair<enum, int> anyway, we can have an attribute storing
a sorted ArrayRef<std::pair<enum, int>> as a single unit. This improves
here the textual format and the general API. Note that we're limiting
the options to fit into an int64_t by design, but this isn't a new
constraint.
Building the LoopOptions attribute is likely worth a specific builder
for efficient reason, that'll be the subject of a future patch.
Differential Revision: https://reviews.llvm.org/D98105
Alex Zinenko