Print relocations interleaved with disassembled instructions for
executables with relocatable sections, e.g. those built with "-Wl,-q".
Differential Revision: https://reviews.llvm.org/D109016
Similar to D94907 (llvm-nm -D).
The output will match GNU objdump 2.37.
Older versions don't use ` (version)` for undefined symbols.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D108097
[[noreturn]] can be used since Oct 2016 when the minimum compiler requirement was bumped to GCC 4.8/MSVC 2015.
Note: the definition of LLVM_ATTRIBUTE_NORETURN is kept for now.
If a file has no symbols, perhaps because it is a linked executable,
synthesize some symbols by walking the code section. Otherwise the
disassembler will try to treat the whole code section as a function,
which won't parse. Fixes https://bugs.llvm.org/show_bug.cgi?id=50957.
Differential Revision: https://reviews.llvm.org/D105539
By using stable_sort.
Added a test case which previously failed when expensive checks were
enabled.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D105240
The patch reuses the common code to print memory operand addresses as
instruction comments. This helps to align the comments and enables using
target-specific comment markers when `evaluateMemoryOperandAddress()` is
implemented for them.
Differential Revision: https://reviews.llvm.org/D104861
For now, the source variable locations are printed at about the same
space as the comments for disassembled code, which can make some ranges
for variables disappear if a line contains comments, for example:
┠─ bar = W1
0: add x0, x2, #2, lsl #12 // =8192┃
4: add z31.d, z31.d, #65280 // =0xff00
8: nop ┻
The patch shifts the report a bit to allow printing comments up to
approximately 16 characters without interferences.
Differential Revision: https://reviews.llvm.org/D104700
LLVM disassembler can generate comments for disassembled instructions.
The patch enables printing these comments for 'llvm-objdump -d'.
Differential Revision: https://reviews.llvm.org/D104699
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
Add in the ability of parsing symbol table for 64 bit object.
Reviewed By: jhenderson, DiggerLin
Differential Revision: https://reviews.llvm.org/D85774
Summary: Under the option --section-headers, we can only
print the section types of TEXT, DATA, and BSS for now.
This patch adds the DEBUG type.
Reviewed By: jhenderson, Higuoxing
Differential Revision: https://reviews.llvm.org/D102603
This makes it possible for targets to define their own MCObjectFileInfo.
This MCObjectFileInfo is then used to determine things like section alignment.
This is a follow up to D101462 and prepares for the RISCV backend defining the
text section alignment depending on the enabled extensions.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101921
lld/MachO/Driver.cpp and lld/MachO/SyntheticSections.cpp include
llvm/Config/config.h which doesn't exist when building standalone lld.
This patch replaces llvm/Config/config.h include with llvm/Config/llvm-config.h
just like it is in lld/ELF/Driver.cpp and HAVE_LIBXAR with LLVM_HAVE_LIXAR and
moves LLVM_HAVE_LIBXAR from config.h to llvm-config.h
Also it adds LLVM_HAVE_LIBXAR to LLVMConfig.cmake and links liblldMachO2.so
with XAR_LIB if LLVM_HAVE_LIBXAR is set.
Differential Revision: https://reviews.llvm.org/D102084
`__mh_(execute|dylib|dylinker|bundle|preload|object)_header` are special symbols whose values hold the VMA of the Mach header to support introspection. They are attached to the first section in `__TEXT`, even though their addresses are outside `__TEXT`, and they do not refer to code.
It is normally harmless, but when the first section of `__TEXT` has no other symbols, `__mh_*_header` is considered by the disassembler when determing function boundaries. Since `__mh_*_header` refers to an address outside `__TEXT`, the boundary determination fails and disassembly quits.
Since `__TEXT,__text` normally has symbols, this bug is obscured. Experiments placing `__stubs` and `__stub_helper` first exposed the bug, since neither has symbols.
Differential Revision: https://reviews.llvm.org/D101786
Fix up my recent commit rG1128311a19179ceca799ff0fbc4dd206ab56e560 to
use std::make_unique instead of std::unique_ptr(new), as requested by
David Blaikie.
Differential Revision: https://reviews.llvm.org/D101822
This untangles the MCContext and the MCObjectFileInfo. There is a circular
dependency between MCContext and MCObjectFileInfo. Currently this dependency
also exists during construction: You can't contruct a MOFI without a MCContext
without constructing the MCContext with a dummy version of that MOFI first.
This removes this dependency during construction. In a perfect world,
MCObjectFileInfo wouldn't depend on MCContext at all, but only be stored in the
MCContext, like other MC information. This is future work.
This also shifts/adds more information to the MCContext making it more
available to the different targets. Namely:
- TargetTriple
- ObjectFileType
- SubtargetInfo
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101462
The internal `cl::opt` option --x86-asm-syntax sets the AsmParser and AsmWriter
dialect. The option is used by llc and llvm-mc tests to set the AsmWriter dialect.
This patch adds -M {att,intel} as GNU objdump compatible aliases (PR43413).
Note: the dialect is initialized when the MCAsmInfo is constructed.
`MCInstPrinter::applyTargetSpecificCLOption` is called too late and its MCAsmInfo
reference is const, so changing the `cl::opt` in
`MCInstPrinter::applyTargetSpecificCLOption` is not an option, at least without
large amount of refactoring.
Reviewed By: hoy, jhenderson, thakis
Differential Revision: https://reviews.llvm.org/D101695
When dumping multiple pieces of information (e.g. --all-headers),
there is sometimes no separator between two pieces.
This patch uses the "\nheader:\n" style, which generally improves
compatibility with GNU objdump.
Note: objdump -t/-T does not add a newline before "SYMBOL TABLE:" and "DYNAMIC SYMBOL TABLE:".
We add a newline to be consistent with other information.
`objdump -d` prints two empty lines before the first 'Disassembly of section'.
We print just one with this patch.
Differential Revision: https://reviews.llvm.org/D101796
Reapply 7368624 after revert and fix
Looking at other tools using tablegen for help output, general options
like --help are not separated from other options. This change removes
the "Generic Options" option group so the options are listed together.
the macho specific option group is left unaffected.
The test help.test was modified to reflect this change.
Differential Revision: https://reviews.llvm.org/D101652
Looking at other tools using tablegen for help output, general options
like --help are not separated from other options. This change removes
the "Generic Options" option group so the options are listed together.
the macho specific option group is left unaffected.
The test help.test was modified to reflect this change.
Differential Revision: https://reviews.llvm.org/D101652
Previously printing R_386_RELATIVE relocations would trigger
`error: can't read an entry at 0x40: it goes past the end of the section (0x40)`
I found this while writing a test case for LLD (D100490).
This also includes some minor cleanup in the elf-dynamic-relcos.test
llvm-objdump test based on the newly added test.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D100489
1. Add an accessor function to MCSymbolizer to retrieve addresses
referenced by a symbolizable operand, but not resolved to a symbol.
That way, the caller can synthesize labels at those addresses and
then retry disassembling the section.
2. Implement that in AMDGPU -- a failed symbol lookup results in the
address being added to a vector returned by the new function.
3. Use that in llvm-objdump when using MCSymbolizer (which only happens
on AMDGPU) and SymbolizeOperands is on.
Differential Revision: https://reviews.llvm.org/D101145
Change-Id: I19087c3bbfece64bad5a56ee88bcc9110d83989e
This implements an LLVM tool that's flag- and output-compatible
with macOS's `otool` -- except for bugs, but from testing with both
`otool` and `xcrun otool-classic`, llvm-otool matches vanilla
otool's behavior very well already. It's not 100% perfect, but
it's a very solid start.
This uses the same approach as llvm-objcopy: llvm-objdump uses
a different OptTable when it's invoked as llvm-otool. This
is possible thanks to D100433.
Differential Revision: https://reviews.llvm.org/D100583
This is similar to D83530, but for llvm-objdump.
The motivation is the desire to add an `llvm-otool` symlink to
llvm-objdump that behaves like macOS's `otool`, using the same
technique the at llvm-objcopy uses to behave like `strip` (etc).
This change for the most part preserves behavior. In some cases,
it increases compatibility with GNU objdump a bit. For example,
the long options now require two dashes, and the long options
taking arguments for the most part now require a `=` in front
of the value. Exceptions are flags where tests passed the
value separately, for these the separate form is kept as
an alias to the = form.
The one-letter short form args are now joined or separate
and long longer accept a =, which also matches GNU objdump.
cl::opt<>s in libraries now have to be explicitly plumbed
through. This patch does that for --x86-asm-syntax=, but
there's hope that we can remove that again.
Differential Revision: https://reviews.llvm.org/D100433
This patch removes all uses of `std::iterator`, which was deprecated in C++17.
While this isn't currently an issue while compiling LLVM, it's useful for those using LLVM as a library.
For some reason there're a few places that were seemingly able to use `std` functions unqualified, which no longer works after this patch. I've updated those places, but I'm not really sure why it worked in the first place.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D67586
The option `--prefix-strip` is only used when `--prefix` is not empty.
It removes N initial directories from absolute paths before adding the
prefix.
This matches GNU's objdump behavior.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D96679
Warnings have been added for three cases (PR41905): (1) missing debug info, (2)
the source file cannot be found, (3) the debug info points at a line beyond the
end of the file.
(1) is probably less useful. This was brought up once on
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141264.html and two
internal users mentioned it to me that it was annoying. (I personally
find the warning confusing, too.)
Users specify --source to get additional information if sources happen to be
available. If sources are not available, it should be obvious as the output
will have no interleaved source lines. The warning can be especially annoying
when using llvm-objdump -S on a bunch of files.
This patch drops the warning when there is no debug info.
(If LLVMSymbolizer::symbolizeCode returns an `Error`, there will still be
an error. There is currently no test for an `Error` return value.
The only code path is probably a broken symbol table, but we probably already emit a warning
in that case)
`source-interleave-prefix.test` has an inappropriate "malformed" test - the test simply has no
.debug_* because new llc does not produce debug info when the filename is empty (invalid).
I have tried tampering the header of .debug_info/.debug_line but llvm-symbolizer does not warn.
This patch does not intend to add the missing test coverage.
Differential Revision: https://reviews.llvm.org/D88715
Compact unwind entries have 8 bits for the encoding-table offset:
* offsets 0..126 reference the global commmon-encodings table, while
* offsets 127..255 reference a per-second-level-page table.
This diff teaches `llvm-objdump` to print this per-page encodings table.
Differential Revision: https://reviews.llvm.org/D93265
FaultsMapParser lived in CodeGen and was forcing llvm-objdump to
link CodeGen and everything CodeGen depends on.
This was previously attempted in r240364 to fix a link failure.
The CodeGen dependency was independently added to fix the same
link failure, and that ended up being kept.
Removing the dependency seems like the correct layering for
llvm-objdump.
Reviewed By: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D95414
Maksim Panchenko