This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
Allow variable number of directories, as allowed by the
specification. NumberOfRvaAndSize will default to 16 if not specified,
as in the past.
Reviewed by: jhenderson
Differential Revision: https://reviews.llvm.org/D108825
This patch continues refactoring done by D99055. It puts format specific
options into the correponding CopyConfig structures.
Differential Revision: https://reviews.llvm.org/D102277
Functions can have a personality function, as well as prefix and
prologue data as additional operands. Unused operands are assigned
a dummy value of i1* null. This patch addresses multiple issues in
use-list order preservation for these:
* Fix verify-uselistorder to also enumerate the dummy values.
This means that now use-list order values of these values are
shuffled even if there is no other mention of i1* null in the
module. This results in failures of Assembler/call-arg-is-callee.ll,
Assembler/opaque-ptr.ll and Bitcode/use-list-order2.ll.
* The use-list order prediction in ValueEnumerator does not take
into account the fact that a global may use a value more than
once and leaves uses in the same global effectively unordered.
We should be comparing the operand number here, as we do for
the more general case.
* While we enumerate all operands of a function together (which
seems sensible to me), the bitcode reader would first resolve
prefix data for all function, then prologue data for all
functions, then personality functions for all functions. Change
this to resolve all operands for a given function together
instead.
Differential Revision: https://reviews.llvm.org/D109282
Print relocations interleaved with disassembled instructions for
executables with relocatable sections, e.g. those built with "-Wl,-q".
Differential Revision: https://reviews.llvm.org/D109016
Currently native clusterization simply groups all benchmarks
by the opcode of key instruction, but that is suboptimal in certain cases,
e.g. where we can already tell that the particular instructions
already resolve into different sched classes.
In preparation for passing the MCSubtargetInfo (STI) through to writeNops
so that it can use the STI in operation at the time, we need to record the
STI in operation when a MCAlignFragment may write nops as padding. The
STI is currently unused, a further patch will pass it through to
writeNops.
There are many places that can create an MCAlignFragment, in most cases
we can find out the STI in operation at the time. In a few places this
isn't possible as we are in initialisation or finalisation, or are
emitting constant pools. When possible I've tried to find the most
appropriate existing fragment to obtain the STI from, when none is
available use the per module STI.
For constant pools we don't actually need to use EmitCodeAlign as the
constant pools are data anyway so falling through into it via an
executable NOP is no better than falling through into data padding.
This is a prerequisite for D45962 which uses the STI to emit the
appropriate NOP for the STI. Which can differ per fragment.
Note that involves an interface change to InitSections. It is now
called initSections and requires a SubtargetInfo as a parameter.
Differential Revision: https://reviews.llvm.org/D45961
In the case of no tied variables, we pick random defs, and then random uses that don't alias with defs we just picked.
Sounds good, except that an X86 instruction may have implicit reg uses,
e.g. for `MULX` it's `EDX`/`RDX`: `Intel SDM, 4-162 Vol. 2B MULX — Unsigned Multiply Without Affecting Flags`
> Performs an unsigned multiplication of the implicit source operand (EDX/RDX) and the specified source operand
> (the third operand) and stores the low half of the result in the second destination (second operand), the high half
> of the result in the first destination operand (first operand), without reading or writing the arithmetic flags.
And indeed, every once in a while `llvm-exegesis` happened to pick EDX as a def while measuring throughput,
and producing garbage output:
```
$ ./bin/llvm-exegesis -num-repetitions=1000000 -mode=inverse_throughput -repetition-mode=min --loop-body-size=4096 -dump-object-to-disk=false -opcode-name=MULX32rr --max-configs-per-opcode=65536
---
mode: inverse_throughput
key:
instructions:
- 'MULX32rr EDX R11D R12D'
config: ''
register_initial_values:
- 'R12D=0x0'
- 'EDX=0x0'
cpu_name: znver3
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 1000000
measurements:
- { key: inverse_throughput, value: 4.00014, per_snippet_value: 4.00014 }
error: ''
info: instruction has no tied variables picking Uses different from defs
assembled_snippet: 415441BC00000000BA00000000C4C223F6D4C4C223F6D4C4C223F6D4C4C223F6D4415CC3415441BC00000000BA0000000049B80200000000000000C4C223F6D4C4C223F6D44983C0FF75F0415CC3
...
```
```
$ ./bin/llvm-exegesis -num-repetitions=1000000 -mode=inverse_throughput -repetition-mode=min --loop-body-size=4096 -dump-object-to-disk=false -opcode-name=MULX32rr --max-configs-per-opcode=65536
---
mode: inverse_throughput
key:
instructions:
- 'MULX32rr R13D EDX ECX'
config: ''
register_initial_values:
- 'ECX=0x0'
- 'EDX=0x0'
cpu_name: znver3
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 1000000
measurements:
- { key: inverse_throughput, value: 3.00013, per_snippet_value: 3.00013 }
error: ''
info: instruction has no tied variables picking Uses different from defs
assembled_snippet: 4155B900000000BA00000000C4626BF6E9C4626BF6E9C4626BF6E9C4626BF6E9415DC34155B900000000BA0000000049B80200000000000000C4626BF6E9C4626BF6E94983C0FF75F0415DC3
...
```
Oops! Not only does that not look fun, i did hit that pitfail during AMD Zen 3 enablement.
While i have since then addressed this in rGd4d459e7475b4bb0d15280f12ed669342fa5edcd,
i suspect there may be other buggy results lying around, so we should at least stop producing them.
Reviewed By: courbet
Differential Revision: https://reviews.llvm.org/D109275
UsedTLSStorage is only used in allocateTLSSection,
guarded in x87 ELF only.
So clang will emit error with -Werror on.
.../llvm/tools/llvm-rtdyld/llvm-rtdyld.cpp:288:12:
error: private field 'UsedTLSStorage' is not used
[-Werror,-Wunused-private-field]
unsigned UsedTLSStorage = 0;
^
We merge cold context by default to save profile size. However trimming cold context after merging doesn't save size much, so default to off to reflect how it's commonly used.
Differential Revision: https://reviews.llvm.org/D109166
This change improves the warning for truncated context by: 1) deduplicate them as one call without probe can appear in many different context leading to duplicated warnings , 2) rephrase the message to make it easier to understand. The term "untracked frame" can be confusing.
Differential Revision: https://reviews.llvm.org/D109115
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
Differential Revision: https://reviews.llvm.org/D108298
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
Adding the compiler support of MD5 CS profile based on pervious context split work D107299. A MD5 CS profile is about 40% smaller than the string-based extbinary profile. As a result, the compilation is 15% faster.
There are a few conversion from real names to md5 names that have been made on the sample loader and context tracker side to get it work.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D108342
The current help msg isn't super clear on whether t prints the content of the files or just the list of files.
(I'd certainly thought it'd print the list of files, and accidentally had a bunch of "gargabe" printed to my terminal).
Similarly, t sounded like it'd do what p actually did.
Differential Revision: https://reviews.llvm.org/D109018
This change aims at supporting LBR only sample perf script which is used for regular(Non-CS) profile generation. A LBR perf script includes a batch of LBR sample which starts with a frame pointer and a group of 32 LBR entries is followed. The FROM/TO LBR pair and the range between two consecutive entries (the former entry's TO and the latter entry's FROM) will be used to infer function profile info.
An example of LBR perf script(created by `perf script -F ip,brstack -i perf.data`)
```
40062f 0x40062f/0x4005b0/P/-/-/9 0x400645/0x4005ff/P/-/-/1 0x400637/0x400645/P/-/-/1 ...
4005d7 0x4005d7/0x4005e5/P/-/-/8 0x40062f/0x4005b0/P/-/-/6 0x400645/0x4005ff/P/-/-/1 ...
...
```
For implementation:
- Extended a new child class `LBRPerfReader` for the sample parsing, reused all the functionalities in `extractLBRStack` except for an extension to parsing leading instruction pointer.
- `HybridSample` is reused(just leave the call stack empty) and the parsed samples is still aggregated in `AggregatedSamples`. After that, range samples, branch sample, address samples are computed and recorded.
- Reused `ContextSampleCounterMap` to store the raw profile, since it's no need to aggregation by context, here it just registered one sample counter with a fake context key.
- Unified to use `show-raw-profile` instead of `show-unwinder-output` to dump the intermediate raw profile, see the comments of the format of the raw profile. For CS profile, it remains to output the unwinder output.
Profile generation part will come soon.
Differential Revision: https://reviews.llvm.org/D108153
Currently context strings contain a lot of duplicated function names and that significantly increase the profile size. This change split the context into a series of {name, offset, discriminator} tuples so function names used in the context can be replaced by the index into the name table and that significantly reduce the size consumed by context.
A follow-up improvement made in the compiler and profiling tools is to avoid reconstructing full context strings which is time- and memory- consuming. Instead a context vector of `StringRef` is adopted to represent the full context in all scenarios. As a result, the previous prevalent profile map which was implemented as a `StringRef` is now engineered as an unordered map keyed by `SampleContext`. `SampleContext` is reshaped to using an `ArrayRef` to represent a full context for CS profile. For non-CS profile, it falls back to use `StringRef` to represent a contextless function name. Both the `ArrayRef` and `StringRef` objects are underpinned by real array and string objects that are stored in producer buffers. For compiler, they are maintained by the sample reader. For llvm-profgen, they are maintained in `ProfiledBinary` and `ProfileGenerator`. Full context strings can be generated only in those cases of debugging and printing.
When it comes to profile format, nothing has changed to the text format, though internally CS context is implemented as a vector. Extbinary format is only changed for CS profile, with an additional `SecCSNameTable` section which stores all full contexts logically in the form of `vector<int>`, which each element as an offset points to `SecNameTable`. All occurrences of contexts elsewhere are redirected to using the offset of `SecCSNameTable`.
Testing
This is no-diff change in terms of code quality and profile content (for text profile).
For our internal large service (aka ads), the profile generation is cut to half, with a 20x smaller string-based extbinary format generated.
The compile time of ads is dropped by 25%.
Differential Revision: https://reviews.llvm.org/D107299
Summary: This patch is trying to add support for llvm-readobj
--needed-libs option under XCOFF.
For XCOFF, the needed libraries can be found from the Import
File ID Name Table of the Loader Section.
Currently, I am using binary inputs in the test since yaml2obj
does not yet support for writing the Loader Section and the
import file table.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D106643
The change adds a switch to allow sample loader to use global pre-inliner's decision instead. The pre-inliner in llvm-profgen makes inline decision globally based on whole program profile and function byte size as cost proxy.
Since pre-inliner also adjusts/merges context profile based on its inline decision, honoring its inline decision in sample loader would lead to better post-inline profile quality especially for thinlto where cross module profile merging isn't possible without pre-inliner.
Minor fix in profile reader is also included. When pre-inliner is use, we now also turn off the default merging and trimming logic unless it's explicitly asked.
Differential Revision: https://reviews.llvm.org/D108677
The --set-section-flags option was being ignored when adding a new
section. Take it into account if present.
Fixes https://llvm.org/PR51244
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D106942
Moved View.h and View.cpp from /tools/llvm-mca/Views/ to /lib/MCA/ and
/include/llvm/MCA/. This is so that targets can define their own Views within
the /lib/Target/ directory (so that the View can use backend functionality).
To enable these Views within mca, targets will need to add them to the vector of
Views returned by their target's CustomBehaviour::getViews() methods.
Differential Revision: https://reviews.llvm.org/D108520
This is a follow up diff for BinarySizeContextTracker to track zero size for fully optimized inlinee. When an inlinee is fully optimized away, we won't be able to get its size through symbolizing instructions, hence we will treat the corresponding context size as unknown. However by traversing the inlined probe forest, we know what're original inlinees regardless of optimization. If a context show up in inlined probes, but not during symbolization, we know that it's fully optimized away hence its size is zero instead of unknown. It should provide more accurate size cost estimation for pre-inliner to make better inline decisions in llvm-profgen.
Differential Revision: https://reviews.llvm.org/D108350
No demangling may be a better default in the future.
Add `--demangle` for migration convenience.
Reviewed By: Enna1
Differential Revision: https://reviews.llvm.org/D108100
The implementation uses the int_asan_check_memaccess intrinsic to instrument the code. The intrinsic is replaced by a call to a function which performs the access check. The generated function names encode the input register name as a number using Reg - X86::NoRegister formula.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D107850
This removes the data layout, target triple, source filename, and module
identifier when possible.
Reviewed By: swamulism
Differential Revision: https://reviews.llvm.org/D108568
Commit 9f2967bcfe introduced support for
branch coverage including export to the LCOV format.
This commit corrects the LCOV field name for branches from BFH to BRH.
The mistake seems to have slipped in as typo because the correct field
name BRH is used in the comment section at the beginning of the file.
Differential Revision: https://reviews.llvm.org/D108358
A couple of passes that are parameterized in new-PM used different
pass names (in cmd line interface) while using the same pass class
name. This patch updates the PassRegistry to model pass parameters
more properly using PASS_WITH_PARAMS.
Reason for the change is to ensure that we have a 1-1 mapping
between class name and pass name (when disregarding the params).
With a 1-1 mapping it is more obvious which pass name to use in
options such as -debug-only, -print-after etc.
The opt -passes syntax is changed for the following passes:
early-cse-memssa => early-cse<memssa>
post-inline-ee-instrument => ee-instrument<post-inline>
loop-extract-single => loop-extract<single>
lower-matrix-intrinsics-minimal => lower-matrix-intrinsics<minimal>
This patch is not updating pass names in docs/Passes.rst. Not quite
sure what the status is for that document (e.g. when it comes to
listing pass paramters). It is only loop-extract-single that is
mentioned in Passes.rst today, out of the passes mentioned above.
Differential Revision: https://reviews.llvm.org/D108362
Support XCOFFDumper relocation reading support
This patch is part of D103696 partition
Reviewed By: daltenty, Helflym
Differential Revision: https://reviews.llvm.org/D104646
Refactored implementation of AddressSanitizerPass and
HWAddressSanitizerPass to use pass options similar to passes like
MemorySanitizerPass. This makes sure that there is a single mapping
from class name to pass name (needed by D108298), and options like
-debug-only and -print-after makes a bit more sense when (despite
that it is the unparameterized pass name that should be used in those
options).
A result of the above is that some pass names are removed in favor
of the parameterized versions:
- "khwasan" is now "hwasan<kernel;recover>"
- "kasan" is now "asan<kernel>"
- "kmsan" is now "msan<kernel>"
Differential Revision: https://reviews.llvm.org/D105007
Currently, `printHelp` behaves differently for options that:
* do not define `HelpText` (such options _are not printed_), and
* define its `HelpText` as `HelpText<"">` (such options _are printed_).
In practice, both approaches lead to no help text and `printHelp` should
treat them consistently. This patch addresses that by making
`printHelpt` check the length of the help text to be printed.
All affected tests have been updated accordingly. The option definitions
for llvm-cvtres have been updated with a short description or "Not
implemented" for options that are ignored by the tool.
Differential Revision: https://reviews.llvm.org/D107557
This change enables llvm-profgen to use accurate context-sensitive post-optimization function byte size as a cost proxy to drive global preinline decisions.
To do this, BinarySizeContextTracker is introduced to track function byte size under different inline context during disassembling. In preinliner, we can not query context byte size under switch `context-cost-for-preinliner`. The tracker uses a reverse trie to keep size of functions under different context (callee as parent, caller as child), and it can give best/longest possible matching context size for given input context.
The new size cost is off by default. There're a few TODOs that needs to addressed: 1) avoid dangling string from `Offset2LocStackMap`, which will be addressed in split context work; 2) using inlinee's entry probe to make sure we have correct zero size for inlinee that's completely optimized away after inlining. Some tuning is also needed.
Differential Revision: https://reviews.llvm.org/D108180
This patch implements Flow Sensitive Sample FDO (FSAFDO) profile
loader. We have two profile loaders for FS profile,
one before RegAlloc and one before BlockPlacement.
To enable it, when -fprofile-sample-use=<profile> is specified,
add "-enable-fs-discriminator=true \
-disable-ra-fsprofile-loader=false \
-disable-layout-fsprofile-loader=false"
to turn on the FS profile loaders.
Differential Revision: https://reviews.llvm.org/D107878
This change adds support to ORCv2 and the Orc runtime library for static
initializers, C++ static destructors, and exception handler registration for
ELF-based platforms, at present Linux and FreeBSD on x86_64. It is based on the
MachO platform and runtime support introduced in bb5f97e3ad.
Patch by Peter Housel. Thanks very much Peter!
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D108081
When option `--symbolize` is true, llvm-xray convert will demangle function
name on default. This patch adds a llvm-xray convert option `no-demangle` to
determine whether to demangle function name when symbolizing function ids from
the input log.
Reviewed By: MaskRay, smeenai
Differential Revision: https://reviews.llvm.org/D108019
Chris Lattner