Summary: Currently, ICP checks the count against a fixed value to see if it is hot enough to be promoted. This does not work for SamplePGO because sampled count may be much smaller. This patch uses PSI to check if the count is hot enough to be promoted.
Reviewers: davidxl, tejohnson, eraman
Reviewed By: davidxl
Subscribers: sanjoy, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D36341
llvm-svn: 310416
Summary: In the current implementation, isPromotionProfitable only checks if the call count to a direct target is no less than a certain percentage threshold of the remaining call counts that have not been promoted. This causes code size problems when the target count is small but greater than a large portion of remaining counts. E.g. target1 takes 99.9%, while target2 takes 0.1%. Both targets will be promoted and inlined, makes the function size too large, which potentially prevents it from further inlining into its callers. This patch adds another percentage threshold against the total indirect call count. If the target count needs to be no less than both thresholds in order to be promoted speculatively.
Reviewers: davidxl, tejohnson
Reviewed By: tejohnson
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D35962
llvm-svn: 309345
This is a module pass so for the old PM, we can't use ORE, the function
analysis pass. Instead ORE is created on the fly.
A few notes:
- isPromotionLegal is folded in the caller since we want to emit the Function
in the remark but we can only do that if the symbol table look-up succeeded.
- There was good test coverage for remarks in this pass.
- promoteIndirectCall uses ORE conditionally since it's also used from
SampleProfile which does not use ORE yet.
Fixes PR33792.
Differential Revision: https://reviews.llvm.org/D35929
llvm-svn: 309294
This is an incremental change to the promotion feature.
There are two problems with the current behavior:
1) loops with multiple exiting blocks are totally disabled
2) a counter update can only be promoted one level up in
the loop nest -- which does help much for short trip
count inner loops inside a high trip-count outer loops.
Due to this limitation, we still saw very large profile
count fluctuations from run to run for the affected loops
which are usually very hot.
This patch adds the support for promotion counters iteratively
across the loop nest. It also turns on the promotion for
loops with multiple exiting blocks (with a limit).
For single-threaded applications, the performance impact is flat
on average. For instance, dealII improves, but povray regresses.
llvm-svn: 307863
Summary:
Leave an updated VP metadata on the fallback memcpy intrinsic after
specialization. This can be used for later possible expansion based on
the average of the remaining values.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34164
llvm-svn: 305321
Summary:
Skip memops if the total value profiled count is 0, we can't correctly
scale up the counts and there is no point anyway.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32624
llvm-svn: 301645
Summary:
Ensure that the new merge BB (which contains the rest of the original BB
after the mem op being optimized) gets a profile frequency, in case
there are additional mem ops later in the BB. Otherwise they get skipped
as the merge BB looks cold.
Reviewers: davidxl, xur
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32447
llvm-svn: 301244
This patch optimizes two memory intrinsic operations: memset and memcpy based
on the profiled size of the operation. The high level transformation is like:
mem_op(..., size)
==>
switch (size) {
case s1:
mem_op(..., s1);
goto merge_bb;
case s2:
mem_op(..., s2);
goto merge_bb;
...
default:
mem_op(..., size);
goto merge_bb;
}
merge_bb:
Differential Revision: http://reviews.llvm.org/D28966
llvm-svn: 299446
This patch adds the value profile support to profile the size parameter of
memory intrinsic calls: memcpy, memcmp, and memmov.
Differential Revision: http://reviews.llvm.org/D28965
llvm-svn: 297897
Summary:
In SamplePGO, if the profile is collected from non-LTO binary, and used to drive ThinLTO, the indirect call promotion may fail because ThinLTO adjusts local function names to avoid conflicts. There are two places of where the mismatch can happen:
1. thin-link prepends SourceFileName to front of FuncName to build the GUID (GlobalValue::getGlobalIdentifier). Unlike instrumentation FDO, SamplePGO does not use the PGOFuncName scheme and therefore the indirect call target profile data contains a hash of the OriginalName.
2. backend compiler promotes some local functions to global and appends .llvm.{$ModuleHash} to the end of the FuncName to derive PromotedFunctionName
This patch tries at the best effort to find the GUID from the original local function name (in profile), and use that in ICP promotion, and in SamplePGO matching that happens in the backend after importing/inlining:
1. in thin-link, it builds the map from OriginalName to GUID so that when thin-link reads in indirect call target profile (represented by OriginalName), it knows which GUID to import.
2. in backend compiler, if sample profile reader cannot find a profile match for PromotedFunctionName, it will try to find if there is a match for OriginalFunctionName.
3. in backend compiler, we build symbol table entry for OriginalFunctionName and pointer to the same symbol of PromotedFunctionName, so that ICP can find the correct target to promote.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30754
llvm-svn: 297757
Current internal option -static-func-full-module-prefix keeps all the
directory path the profile counter names for static functions. The default
of this option is false. This strips the directory names from the source
filename which is problematic:
(1) it creates linker errors for profile-generation compilation, exposed in
our internal benchmarks. We are seeing messages like
"warning: relocation refers to discarded section".
This is due to the name conflicts after the stripping.
(2) the stripping only applies to getPGOFuncName.
Current Thin-LTO module importing for the indirect-calls assumes
the source directory name not being stripped. Current default value
for this option can potentially prevent some inter-module
indirect-call-promotions.
This patch turns the default value for -static-func-full-module-prefix to true.
The second part of the patch is to have an alternative implementation under
the internal option -static-func-strip-dirname-prefix=<value>
This options specifies level of directories to be stripped from the source
filename. Using a large value as the parameter has the same effect as
-static-func-full-module-prefix.
Differential Revision: http://reviews.llvm.org/D29512
llvm-svn: 296206
Summary: SamplePGO uses branch_weight annotation to represent callsite hotness. When ICP promotes an indirect call to direct call, we need to make sure the direct call is annotated with branch_weight in SamplePGO mode, so that downstream function inliner can use hot callsite heuristic.
Reviewers: davidxl, eraman, xur
Reviewed By: davidxl, xur
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30282
llvm-svn: 296028
This reverts 295092 (re-applies 295084), with a fix for dangling
references from the array of coverage names passed down from frontends.
I missed this in my initial testing because I only checked test/Profile,
and not test/CoverageMapping as well.
Original commit message:
The profile name variables passed to counter increment intrinsics are dead
after we emit the finalized name data in __llvm_prf_nm. However, we neglect to
erase these name variables. This causes huge size increases in the
__TEXT,__const section as well as slowdowns when linker dead stripping is
disabled. Some affected projects are so massive that they fail to link on
Darwin, because only the small code model is supported.
Fix the issue by throwing away the name constants as soon as we're done with
them.
Differential Revision: https://reviews.llvm.org/D29921
llvm-svn: 295099
The profile name variables passed to counter increment intrinsics are
dead after we emit the finalized name data in __llvm_prf_nm. However, we
neglect to erase these name variables. This causes huge size increases
in the __TEXT,__const section as well as slowdowns when linker dead
stripping is disabled. Some affected projects are so massive that they
fail to link on Darwin, because only the small code model is supported.
Fix the issue by throwing away the name constants as soon as we're done
with them.
Differential Revision: https://reviews.llvm.org/D29921
llvm-svn: 295084
This patch reverts r291588: [PGO] Turn off comdat renaming in IR PGO by default,
as we are seeing some hash mismatches in our internal tests.
llvm-svn: 291621
Summary:
In IR PGO we append the function hash to comdat functions to avoid the
potential hash mismatch. This turns out not legal in some cases: if the comdat
function is address-taken and used in comparison. Renaming changes the semantic.
This patch turns off comdat renaming by default.
To alleviate the hash mismatch issue, we now rename the profile variable
for comdat functions. Profile allows co-existing multiple versions of profiles
with different hash value. The inlined copy will always has the correct profile
counter. The out-of-line copy might not have the correct count. But we will
not have the bogus mismatch warning.
Reviewers: davidxl
Subscribers: llvm-commits, xur
Differential Revision: https://reviews.llvm.org/D28416
llvm-svn: 291588
Summary:
Since we don't break BBs for function calls. We might get some insane counts
(wrap of unsigned) in the presence of noreturn calls.
This patch sets these counts to zero instead of the wrapped number.
Reviewers: davidxl
Subscribers: xur, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D27602
llvm-svn: 289521
For -O0 there might be unreachable BBs, which breaks the assumption that all the
BBs have an auxiliary data structure. In this patch, we add another interface
called findBBInfo() so that a nullptr can be returned for the unreachable BBs
(and the callers can ignore those BBs).
This fixes the bug reported
https://llvm.org/bugs/show_bug.cgi?id=31209
Differential Revision: https://reviews.llvm.org/D27280
llvm-svn: 288528
Summary:
Select instruction annotation in IR PGO uses the edge count to infer the
branch count. It's currently placed in setInstrumentedCounts() where
no all the BB counts have been computed. This leads to wrong branch weights.
Move the annotation after all BB counts are populated.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25961
llvm-svn: 285128
Add a weak alias to the renamed Comdat function in IR level instrumentation,
using it's original name. This ensures the same behavior w/ and w/o IR
instrumentation, even for non standard conforming code.
Differential Revision: http://reviews.llvm.org/D25339
llvm-svn: 283490
Summary:
Fix a couple issues limiting the application of indirect call promotion
in ThinLTO mode:
- Invoke indirect call promotion before globalopt, since it may
eliminate imported functions which appear unreferenced.
- Invoke indirect call promotion with InLTO=true so that the PGOFuncName
metadata is used to get the name for locals which would have been
renamed during promotion.
Reviewers: davidxl, mehdi_amini
Subscribers: Prazek, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24004
llvm-svn: 280024
Change --no-pgo-warn-missing to -pgo-warn-missing-function
and negate the default. /NFC
Add more test to make sure the warning is off by default
llvm-svn: 278314
no prof data for func warning is turned off by default
due to its high verbosity and minimal usefulness.
Differential Revision: http://reviews.llvm.org/D23295
llvm-svn: 278127
Pre-instrumentation inline (pre-inliner) greatly improves the IR
instrumentation code performance, among other benefits. One issue of the
pre-inliner is it can introduce CFG-mismatch for COMDAT functions. This
is due to the fact that the same COMDAT function may have different early
inline decisions across different modules -- that means different copies
of COMDAT functions will have different CFG checksum.
In this patch, we propose a partially renaming the COMDAT group and its
member function/variable so we have different profile counter for each
version. We will post-fix the COMDAT function and the group name with its
FunctionHash.
Differential Revision: http://reviews.llvm.org/D22600
llvm-svn: 276673
Summary:
To enable profile-guided indirect call promotion in ThinLTO mode, we
simply add call graph edges for each profitable target from the profile
to the summaries, then the summary-guided importing will consider the
callee for importing as usual.
Also we need to enable the indirect call promotion pass creation in the
PassManagerBuilder when PerformThinLTO=true (we are in the ThinLTO
backend), so that the newly imported functions are considered for
promotion in the backends.
The IC promotion profiles refer to callees by GUID, which required
adding GUIDs to the per-module VST in bitcode (and assigning them
valueIds similar to how they are assigned valueIds in the combined
index).
Reviewers: mehdi_amini, xur
Subscribers: mehdi_amini, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21932
llvm-svn: 275707
This patch adds a selected set of cleanup passes including a pre-inline pass
before LLVM IR PGO instrumentation. The inline is only intended to apply those
obvious/trivial ones before instrumentation so that much less instrumentation
is needed to get better profiling information. This will drastically improve
the instrumented code performance for large C++ applications. Another benefit
is the context sensitive counts that can potentially improve the PGO
optimization.
Differential Revision: http://reviews.llvm.org/D21405
llvm-svn: 275588
Inline virtual functions has linkeonceodr linkage (emitted in comdat on
supporting targets). If the vtable for the class is not emitted in the
defining module, function won't be address taken thus its address is not
recorded. At the mercy of the linker, if the per-func prf_data from this
module (in comdat) is picked at link time, we will lose mapping from
function address to its hash val. This leads to missing icall promotion.
The second test case (currently disabled) in compiler_rt (r271528):
instrprof-icall-prom.test demostrates the bug. The first profile-use
subtest is fine due to linker order difference.
With this change, no missing icall targets is found in instrumented clang's
raw profile.
llvm-svn: 271532
It was triggering an msan bot.
Revert "[IRPGO] Set the function entry count metadata."
This reverts commit r271090.
Revert "[IRPGO] Centralize the function attribute inliner hint logic. NFC."
This reverts commit r271089.
llvm-svn: 271091
This reverts commits r268969, r268979 and r268984. They had target specific test
in generic directories without the correct specifiers and made it hard for us to
come up with a good solution by rapidly committing untested changes.
This test needs to be in a target specific directory or have the correct REQUIRED
identifier.
llvm-svn: 269027
IR instrumentation generates a COMDAT symbol __llvm_profile_raw_version to
overwrite the same symbol in profile run-time to distinguish IR profiles from
Clang generated profiles. In MACHO, LinkOnceODR linkage is used due to the
lack of COMDAT support.
But LinkOnceODR linkage might have .weak_def_can_be_hidden assembly directive,
while the weak variable in run-time has a .weak_definition directive. Linker
will not merge these two symbols even they have the same name. The end result
is IR profiles are not properly flagged in MACHO.
This patch changes the linkage for __llvm_profile_raw_version in each module to
LinkOnceAny so that it has same .weak_definition directive as in the run-time.
Differential Revision: http://reviews.llvm.org/D20078
llvm-svn: 268969
This patch implements the transformation that promotes indirect calls to
conditional direct calls when the indirect-call value profile meta-data is
available.
Differential Revision: http://reviews.llvm.org/D17864
llvm-svn: 267815
Direct callees' that are cast to other function prototypes,
show up in the Call/Invoke instructions as ConstantExpr's.
Currently llvm::CallSite's getCalledFunction() fails
to return the callees in such expressions as direct calls.
Value profiling should avoid instrumenting such cases. Mostly NFC.
llvm-svn: 265330
Value profile instrumentation treats inline asm calls like they are
indirect calls. This causes problems when the 'Callee' is passed to a
ptrtoint cast -- the verifier rightly claims that this is bogus and
crashes opt.
llvm-svn: 263278
This patch reads the indirect-call value records in the profile and makes the
annotation in the indirect-call instruction. This is for IR level profile
instrumentation.
Differential Revision: http://reviews.llvm.org/D16935
llvm-svn: 260400
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
For Maco-O platform, we generate the variable as linkonce_odr linkage as
COMDAT is not supported.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
The patch was submitted as r260164 but reverted due to a Darwin test breakage.
Original Differential Revision: http://reviews.llvm.org/D15540
Differential Revision: http://reviews.llvm.org/D17020
llvm-svn: 260385
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
Differential Revision: http://reviews.llvm.org/D15540
llvm-svn: 260146
This patch adds the instrumentation for indirect call value profiling. It finds all the indirect call-sites and generates instrprof_value_profile intrinsic calls. A new opt level option -disable-vp is introduced to disable this instrumentation.
Reviewers: davidxl, betulb, vsk
Differential Revision: http://reviews.llvm.org/D16016
llvm-svn: 258417
Profile symbols have long prefixes which waste space and creating pressure for linker.
This patch shortens the prefixes to minimal length without losing verbosity.
Differential Revision: http://reviews.llvm.org/D15503
llvm-svn: 255575
Before the patch, -fprofile-instr-generate compile will fail
if no integrated-as is specified when the file contains
any static functions (the -S output is also invalid).
This is the second try. The fix in this patch is very localized.
Only profile symbol names of profile symbols with internal
linkage are fixed up while initializer of name syms are not
changes. This means there is no format change nor version bump.
llvm-svn: 255434
Before the patch, -fprofile-instr-generate compile will fail
if no integrated-as is specified when the file contains
any static functions (the -S output is also invalid).
This patch fixed the issue. With the change, the index format
version will be bumped up by 1. Backward compatibility is
preserved with this change.
Differential Revision: http://reviews.llvm.org/D15243
llvm-svn: 255365
Two tests diag_mismatch.ll and diag_no_funcprofdata.ll generates the same
profdata filename which can conflict in current test runs. This patch
renames them to have different names.
llvm-svn: 255158
This new patch fixes a few bugs that exposed in last submit. It also improves
the test cases.
--Original Commit Message--
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 255132
Fix buildbot failure for clang-x86_64-linux-selfhost-modules.
http://lab.llvm.org:8011/builders/clang-x86_64-linux-selfhost-modules/builds/8866
The failing test cases are newly added from r254021. It seems the IR has a
different order in this platform. In this patch, I temporarily relax the test
case to make the build green. I'll have a complete fix (more robust way to test)
soon.
llvm-svn: 254035
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 254021
Dehao Chen