This simplifies a few things
* Read the value as early as possible, instead of passing a pointer to
the location.
* Print the warning for missing pair close to where we find out it is
missing.
* Don't pass the value to relocateOne.
llvm-svn: 264802
It was a badly specified hack for when a tls relocation should be
propagated to the dynamic relocation table.
This replaces it with a not as bad hack of saying that a local dynamic
tls relocation is never preempted.
I will try to remove even that second hack in the next patch.
llvm-svn: 262955
Patch changes the return type of Target::relaxTls
to size_t from unsigned. That is consistent with
its use from other code.
Change was reviewed http://reviews.llvm.org/D17882
and asked to commit separately from that patch above.
llvm-svn: 262794
Patch changes all relocations types to be uint32_t and also
fixes some dependent inconsistency in callers code.
Differential revision: http://reviews.llvm.org/D17882
llvm-svn: 262793
The rules for when we can relax tls relocations are target independent.
The only things that are target dependent are the relocation values.
llvm-svn: 262748
For shared libraries we allow any weak undefined symbol to eventually be
resolved, even if we never see a definition in another .so. This matches
the behavior when handling other undefined symbols in a shared library.
For executables, we require seeing a definition in a .so or resolve it
to zero. This is also similar to how non weak symbols are handled.
llvm-svn: 262017
This patch adds some TLS relocations and relaxations for AArch64.
Some Global-Dynamic relocation are handled by optimizing them to
Local-Exec (Initial-Exec is not yet supported). They are:
- R_AARCH64_TLSDESC_ADR_PAGE21
- R_AARCH64_TLSDESC_LD64_LO12_NC
- R_AARCH64_TLSDESC_ADD_LO12_NC
- R_AARCH64_TLSDESC_CALL
Also some Init-Exec is optimized to Local-Exec if possible. They are:
- R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
- R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
Finally some Local-Exec relocation are handled in relocateOne:
- R_AARCH64_TLSLE_ADD_TPREL_HI12
- R_AARCH64_TLSLE_ADD_TPREL_LO12_NC
This work is mainly for compiler bootstrap, where static binaries is
showing good progress (although shared object still lacking support
from both TLS aarch64 backend and some other issues).
llvm-svn: 260677
Previously, Target held a value until a new value is assigned to the
variable. That was a benign leak -- that was not an unbounded leak
and didn't grab any resources except a small amount of memory. But
it is better to fix than leaving as is.
llvm-svn: 260592
R_X86_64_TPOFF64 is a dynamic relocation,
it should not appear in static relocation processing.
Patch fixes it.
Differential revision: http://reviews.llvm.org/D16880
llvm-svn: 260508
This is the function equivalent of a copy relocation.
Since functions are expected to change sizes, we cannot use copy
relocations. In situations where one would be needed, what is done
instead is:
* Create a plt entry
* Output an undefined symbol whose addr is the plt entry.
The dynamic linker makes sure any shared library uses the plt entry as
the function address.
llvm-svn: 260224
Symbol does not need an entry i the 'global' part of GOT if it cannot be
preempted. So canBePreempted fully satisfies us at least for now.
llvm-svn: 259779
This function is a predicate that a given relocation can be relaxed.
The previous name implied that it returns true if a given relocation
has already been optimized away.
llvm-svn: 259128
In InputSection.cpp it was possible to dereference null.
Had to change signature of relocateTlsOptimize to accept pointer instead of reference.
Differential revision: http://reviews.llvm.org/D16466
llvm-svn: 258508
Some MIPS relocation (for now R_MIPS_GOT16) requires creation of GOT
entries for symbol not included in the dynamic symbol table. They are
local symbols and non-local symbols with 'local' visibility. Local GOT
entries occupy continuous block between GOT header and regular GOT
entries.
The patch adds initial support for handling local GOT entries. The main
problem is allocating local GOT entries for local symbols. Such entries
should be initialized by high 16-bit of the symbol value. In ideal world
there should be no duplicated entries with the same values. But at the
moment of the `Writer::scanRelocs` call we do not know a value of the
symbol. In this patch we create new local GOT entry for each relocation
against local symbol, though we can exhaust GOT quickly. That needs to
be optimized later. When we calculate relocation we know a final symbol
value and request local GOT entry index. To do that we maintain map
between addresses and local GOT entry indexes. If we start to calculate
relocations in parallel we will have to serialize access to this map.
Differential Revision: http://reviews.llvm.org/D16324
llvm-svn: 258388
MIPS ABI has relocations like R_MIPS_JALR which is just a hint for
linker to make some code optimization. Such relocations should not be
handled as a regular ones and lead to say dynamic relocation creation.
The patch introduces new virtual `Target::isHintReloc` method, overrides
it in the `MipsTargetInfo` class and calls it in the `Writer<ELFT>::scanRelocs`
method.
Differential Revision: http://reviews.llvm.org/D16193
llvm-svn: 257798
R_X86_64_PLT32 is handled in the same way as R_X86_64_PC32 by
relocateOne(), so this function does not seems to be needed.
Without this code, all tests still pass.
http://reviews.llvm.org/D15971
llvm-svn: 257203
All non-trivial relocation decisions need explanations like this
to help readers understand not only how relocations are handled but
why they are handled these ways. This is a start.
llvm-svn: 257119
This relocation is similar to R_*_RELATIVE except that the value used in this relocation is the program address returned by the function, which takes no arguments, at the address of
the result of the corresponding R_*_RELATIVE relocation as specified in the processor-specific ABI. The purpose of this relocation to avoid name lookup for locally defined STT_GNU_IFUNC symbols at load-time.
More info can be found in ifunc.txt from https://sites.google.com/site/x32abi/documents.
Differential revision: http://reviews.llvm.org/D15235
llvm-svn: 256144
R_386_GOTOFF is calculated as S + A - GOT, where:
S - Represents the value of the symbol whose index resides in the relocation entry.
A - Represents the addend used to compute the value of the relocatable field.
GOT - Represents the address of the global offset table.
Differential revision: http://reviews.llvm.org/D15383
llvm-svn: 256143
@indntpoff is similar to @gotntpoff, but for use in position dependent code. While @gotntpoff resolves to GOT slot address relative to the
start of the GOT in the movl or addl instructions, @indntpoff resolves to the
absolute GOT slot address. ("ELF Handling For Thread-Local Storage", Ulrich Drepper).
Differential revision: http://reviews.llvm.org/D15494
llvm-svn: 255884
R_X86_64_SIZE64/R_X86_64_SIZE32 relocations were introduced in 0.98v of "System V Application Binary Interface x86-64" (http://www.x86-64.org/documentation/abi.pdf).
Calculation for them is Z + A, where:
Z - Represents the size of the symbol whose index resides in the relocation entry.
A - Represents the addend used to compute the value of the relocatable field.
Differential revision: http://reviews.llvm.org/D15335
llvm-svn: 255332
"Ulrich Drepper, ELF Handling For Thread-Local Storage" (5.5 x86-x64 linker optimizations, http://www.akkadia.org/drepper/tls.pdf) shows how GD can be optimized to IE.
This patch implements the optimization.
Differential revision: http://reviews.llvm.org/D15000
llvm-svn: 254713
Some MIPS relocations including `R_MIPS_HI16/R_MIPS_LO16` use combined
addends. Such addend is calculated using addends of both paired relocations.
Each `R_MIPS_HI16` relocation is paired with the next `R_MIPS_LO16`
relocation. ABI requires to compute such combined addend in case of REL
relocation record format only.
For details see p. 4-17 at
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
This patch implements lookup of the next paired relocation suing new
`InputSectionBase::findPairedRelocLocation` method. The primary
disadvantage of this approach is that we put MIPS specific logic into
the common code. The next disadvantage is that we lookup `R_MIPS_LO16`
for each `R_MIPS_HI16` relocation, while in fact multiple `R_MIPS_HI16`
might be paired with the single `R_MIPS_LO16`. From the other side
this way allows us to keep `MipsTargetInfo` class stateless and implement
later relocation handling in parallel.
This patch does not support `R_MIPS_HI16/R_MIPS_LO16` relocations against
`_gp_disp` symbol. In that case the relocations use a special formula for
the calculation. That will be implemented later.
Differential Revision: http://reviews.llvm.org/D15112
llvm-svn: 254461
Rafael Espindola