Add verification for copies involving generic registers if they are
compatible - ie if it is a generic copy, then the types are the
same, and if a COPY b/w generic and target virtual register, then
the sizes should be the same. Only checks if there are no sub registers
involved for now.
https://reviews.llvm.org/D37775
llvm-svn: 324696
Emitting the correct (root of compilation) file at index 0 will be
posted for review later; I wanted to get this minor change out of the
way first.
llvm-svn: 324669
The patch essentially makes sure that X86CallLowering adds proper
G_COPY/G_TRUNC and G_ANYEXT/G_COPY when we are doing lowering of
arguments/returns for floating point values passed on registers.
Tests are updated accordingly
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D42287
llvm-svn: 324665
Most vxi1 constant build vectors have to be implemented in the scalar domain anyway so we'll probably end up with a cast there later. But by then its too late to do the combine to get rid of it.
llvm-svn: 324662
This allows the register name to be printed without the leading '%'.
This can be used for emitting calls to the retpoline thunks from inline
asm.
llvm-svn: 324645
One of them shows a missed opportunity to use SimplifyDemandedBits on the condition when its used by multiple vselects.
The other is a case we shouldn't optimize because the condition has a non-vselect use.
llvm-svn: 324630
Instructions affected:
mthc1, mfhc1, add.d, sub.d, mul.d, div.d,
mov.d, neg.d, cvt.w.d, cvt.d.s, cvt.d.w, cvt.s.d
These instructions are now defined for
microMIPS32r3 + microMIPS32r6 in MicroMipsInstrFPU.td
since they shared their encoding with those already defined
in microMIPS32r6InstrInfo.td and have been therefore
removed from the latter file.
Some instructions present in MicroMipsInstrFPU.td which
did not have both AFGR64 and FGR64 variants defined have
been altered to do so.
Differential revision: https://reviews.llvm.org/D42738
llvm-svn: 324584
We were generating "fmov h0, wzr" instructions when FullFP16 is not enabled.
I've not added any tests, because the problem was visible in:
test/CodeGen/AArch64/arm64-zero-cycle-zeroing.ll,
which I had to change: I don't think Cyclone has FullFP16 enabled
by default, so it shouldn't be using this v8.2a instruction.
I've also removed these rdar tags, please shout if there are any objections.
Differential Revision: https://reviews.llvm.org/D43020
llvm-svn: 324581
The KTEST instruction sets the C flag if the result of anding both operands together is all 1s. We can use this to lower (icmp eq/ne (bitcast (vXi1 X), -1)
Differential Revision: https://reviews.llvm.org/D42772
llvm-svn: 324577
Summary:
KTEST has weird flag behavior. The Z flag is set for all bits in the AND of the k-registers being 0, and the C flag is set for all bits being 1. All other flags are cleared.
We currently emit this instruction in EmitTEST and don't check the condition code. This can lead to strange things like using the S flag after a KTEST for a signed compare.
The domain reassignment pass can also transform TEST instructions into KTEST and is not protected against the flag usage either. For now I've disabled this part of the domain reassignment pass. I tried to comment out the checks in the mir test so that we could recover them later, but I couldn't figure out how to get that to work.
This patch moves the KTEST handling into LowerSETCC and now creates a ktest+x86setcc. I've chosen this approach because I'd like to add support for the C flag for all ones in a followup patch. To do that requires that I can rewrite the condition code going in the x86setcc to be different than the original SETCC condition code.
This fixes PR36182. I'll file a PR to fix domain reassignment once this goes in. Should this be merged to 6.0?
Reviewers: spatel, guyblank, RKSimon, zvi
Reviewed By: guyblank
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42770
llvm-svn: 324576
Instead of:
%bb.1: derived from LLVM BB %for.body
print:
bb.1.for.body:
Also use MIR syntax for MBB attributes like "align", "landing-pad", etc.
llvm-svn: 324563
LowerSELECT_CC is not generating optimal Select_Ri pattern at the moment. It
is not guaranteed to place ConstantNode at RHS which would miss matching
Select_Ri.
A new testcase added into the existing select_ri.ll, also there is an
existing case in cmp.ll which would be improved to use Select_Ri after this
patch, it is adjusted accordingly.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 324560
hit from IR but creates a minefield for MI passes.
The x86 backend has fairly powerful logic to try and fold loads that
feed register operands to instructions into a memory operand on the
instruction. This is almost always a good thing, but there are specific
relocated loads that are only allowed to appear in specific
instructions. Notably, R_X86_64_GOTTPOFF is only allowed in `movq` and
`addq`. This patch blocks folding of memory operands using this
relocation unless the target is in fact `addq`.
The particular relocation indicates why we simply don't hit this under
normal circumstances. This relocation is only used for TLS, and it gets
used in very specific ways in conjunction with %fs-relative addressing.
The result is that loads using this relocation are essentially never
eligible for folding into an instruction's memory operands. Unless, of
course, you have an MI pass that inserts usage of such a load. I have
exactly such an MI pass and was greeted by truly mysterious miscompiles
where the linker replaced my instruction with a completely garbage byte
sequence. Go team.
This is the only such relocation I'm aware of in x86, but there may be
others that need to be similarly restricted.
Fixes PR36165.
Differential Revision: https://reviews.llvm.org/D42732
llvm-svn: 324546
If we are saving/restoring k-registers, the default behavior of getMinimalRegisterClass will find the VK64 class with a spill size of 64 bits. This will cause the KMOVQ opcode to be used for save/restore. If we don't have have BWI instructions we need to constrain the class returned to give us VK16 with a 16-bit spill size. We can do this by passing the either v16i1 or v64i1 into getMinimalRegisterClass.
Also add asserts to make sure BWI is enabled anytime we use KMOVD/KMOVQ. These are what caught this bug.
Fixes PR36256
Differential Revision: https://reviews.llvm.org/D42989
llvm-svn: 324533
Note: This is a candidate for LLVM 6.0, because it was planned to be
in that release but was delayed due to a long review period.
Merge conflict in release_60 - resolution:
Add "-p6:32:32" into the second (non-amdgiz) string.
Only scalar loads support 32-bit pointers. An address in a VGPR will
fail to compile. That's OK because the results of loads will only be used
in places where VGPRs are forbidden.
Updated AMDGPUAliasAnalysis and used SReg_64_XEXEC.
The tests cover all uses cases we need for Mesa.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D41651
llvm-svn: 324487
Summary:
I checked the AMD closed source compiler and the workaround is only
needed when x3 is emulated as x4, which we don't do in LLVM.
SMEM x3 opcodes don't exist, and instead there is a possibility to use x4
with the last component being unused. If the last component is out of
buffer bounds and falls on the next 4K page, the hw hangs.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D42756
llvm-svn: 324486
Both operand codes now work the same way in case of register or memory
operands. It print high-order or low-order word in a double-word
register or memory location.
llvm-svn: 324476
With fixes from rL324341.
Original commit message:
[MergeICmps] Enable the MergeICmps Pass by default.
Summary: Now that PR33325 is fixed, this should always improve the generated code.
Reviewers: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42793
llvm-svn: 324465
This is a follow up of r324321, adding a match pattern for mov with a FP16
immediate (also fixing operand vfp_f16imm that wasn't even compiling).
Differential Revision: https://reviews.llvm.org/D42973
llvm-svn: 324456
that happened to end up in GCC.
This is really unfortunate, as the names don't have much rhyme or reason
to them. Originally in the discussions it seemed fine to rely on aliases
to map different names to whatever external thunk code developers wished
to use but there are practical problems with that in the kernel it turns
out. And since we're discovering this practical problems late and since
GCC has already shipped a release with one set of names, we are forced,
yet again, to blindly match what is there.
Somewhat rushing this patch out for the Linux kernel folks to test and
so we can get it patched into our releases.
Differential Revision: https://reviews.llvm.org/D42998
llvm-svn: 324449
Summary:
Some of the commands tries to get the register without checking
if the specified operands is a register and causing crash. All commands
should check the type of the operand first and reject if the type is
not expected.
Reviewers: dsanders, qcolombet
Reviewed By: qcolombet
Subscribers: qcolombet, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42984
llvm-svn: 324442
1. Run the memory legalizer prior to the waitcnt pass; keep the policy that the waitcnt pass does not remove any waitcnts within the incoming IR.
2. The waitcnt pass doesn't (yet) track waitcnts that exist prior to the waitcnt pass (it just skips over them); because the waitcnt pass is ignorant of them, it may insert a redundant waitcnt. To avoid this, check the prev instr. If it and the to-be-inserted waitcnt are the same, suppress the insertion. We keep the existing waitcnt under the assumption that whomever, e.g., the memory legalizer, inserted it knows what they were doing.
3. Follow-on work: teach the waitcnt pass to record the pre-existing waitcnts for better waitcnt production.
Differential Revision: https://reviews.llvm.org/D42854
llvm-svn: 324440
For example 'ugt X, 0' can be simplified to 'ne X, 0'. Or 'uge X, 0' is always true.
We already simplify this for scalars in SimplifySetCC, but we don't currently for vectors in SimplifySetCC. D42948 proposes to change that.
llvm-svn: 324436
X86 currently has a late DAG combine after cttz/ctlz are turned into BSR+BSF+CMOV to detect this and remove the CMOV. But we should be able to do this much earlier and avoid creating the cmov all together.
For the changed AMDGPU test case it appears that previously the i8 cttz was type legalized to i16 which introduced an OR with 256 in order to limit the result to 8 on the widened type. At this point the result is known to never be zero, but nothing checked that. Then operation legalization is told to promote all i16 cttz to i32. This introduces an extend and a truncate and another OR with 65536 to limit the result to 16. With the DAG combiner change we are able to prevent the creation of the second OR since the opcode will have been changed to cttz_zero_undef after the first OR. I the lack of the OR caused the instruction to change to v_ffbl_b32_sdwa
Differential Revision: https://reviews.llvm.org/D42985
llvm-svn: 324427
Craig Topper