looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
llvm-dsymutil used to create the temporary files in the output directory.
This works fine except when the output directory contains a '%' char, which
is then replaced by llvm::sys::fs::createUniqueFile() generating an invalid
path.
Just use the default temp dir for those files.
llvm-svn: 268304
Even if we don't have it in PATH, lipo should usually exist in the same directory
as dsymutil. Keep the fallback looking up the PATH, it's very useful when
testing a non-installed executable.
llvm-svn: 249762
There was an issue in the test setup because the test requires an arch that
wasn't filtered by the lit.local.cfg, but given the set of bots that failed,
I'm not confident this is the (only) issue. So this commit also adds more
output to the test to help me track down the failure if it happens again.
Original commit message:
[dsymutil] Rewrite thumb triple names in user visible messages.
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245988
This reverts commit r245960.
Multiple bots are failing on the new test. It seemd like llvm-dsymutil exits with an error. Investigating.
llvm-svn: 245964
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245960
A dSYM bundle is a file hierarchy that looks slike this:
<bundle name>.dSYM/
Contents/
Info.plist
Resources/
DWARF/
<DWARF file(s)>
This is the default output mode of dsymutil.
llvm-svn: 244270
dsymutil should by default generate dSYM bundles which are filesystem
hierarchies containing the debug info and an additional Info.plist.
Currently llvm-dsymutil emits raw binaries containing the debug info.
This is what we call the 'flat mode'. Add a -f/-flat option that is
supposed to enable that flat mode, but don't wire it for now, only
pass it to the tests that will need it to stay functional once we
do bundle generation by default.
This basically makes this commit NFC and removes the noise from the
actual commit that adds support for bundle generation.
llvm-svn: 244269
The files were never written to and then deleted, but they were created
nonetheless. To prevent that, create a wrapper around the 2 variants of
createUniqueFile and use the one that only does an access(Exists) call
to check for name unicity in -no-output mode.
llvm-svn: 244172
This option allows to select a subset of the architectures when
performing a universal binary link. The filter is done completely
in the mach-o specific part of the code.
llvm-svn: 244160
The DWARF linker isn't touched by this, the implementation links
individual files and merges them together into a fat binary by
calling out to the 'lipo' utility.
The main change is that the MachODebugMapParser can now return
multiple debug maps for a single binary.
The test just verifies that lipo would be invoked correctly, but
doesn't actually generate a binary. This mimics the way clang
tests its external iplatform tools integration.
llvm-svn: 244087
llvm-dsymutil will start creating temporary files in a followup
commit. To ease the correct cleanup of this files, introduce a
helper called to exit dsymutil.
llvm-svn: 244086
Prevent all the unrelated LLVM options to appear in the -help output
by introducing a tool specific option category. As a drive-by improve
the wording of the help message.
llvm-svn: 243583
The dsymutil-classic -v option dumps the tool version rather than
putting it in verbose mode. Rename -v to -verbose and update the
tests that use it (in the process removing it from a few tests that
didn't require it anymore since the -dump-debug-map option was
introduced).
A followup commit will reintroduce the -v option that dumps the
version.
llvm-svn: 243582
This optimization allows the DWARF linker to reuse definition of
types it has emitted in previous CUs rather than reemitting them
in each CU that references them. The size and link time gains are
huge. For example when linking the DWARF for a debug build of
clang, this generates a ~150M dwarf file instead of a ~700M one
(the numbers date back a bit and must not be totally accurate
these days).
As with all the other parts of the llvm-dsymutil codebase, the
goal is to keep bit-for-bit compatibility with dsymutil-classic.
The code is littered with a lot of FIXMEs that should be
addressed once we can get rid of the compatibilty goal.
llvm-svn: 242847
With a couple more constructors that GCC thinks are necessary.
Original commit message:
[dsymutil] Accept a YAML debug map as input instead of a binary.
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
llvm-svn: 238959
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
llvm-svn: 238941
As the serialized debug map is becoming a first class citizen, a way
to cleanly dump it is required. We used -parse-only combined with
-v for that purpose before, but it dumps a lot of unrelated debug
stuff. Dumping the debug map was the only use of the -parse-only flag
anyway, so replace it with a more useful option.
llvm-svn: 238940
This class is responsible for getting the linked data to the
disk in the appropriate form. Today it it an empty shell that
just instantiates an MC layer.
As we do not put anything in the resulting file yet, we just
check it has the right architecture (and check that -o does
the right thing).
To be able to create all the components, this commit adds a
few dependencies to llvm-dsymutil, namely all-targets, MC and
AsmPrinter.
Also add a -no-output option, so that tests that do not need
the binary result can continue to run even if they do not have
the required target linked in.
llvm-svn: 230824
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
llvm-svn: 225974
The goal of this tool is to replicate Darwin's dsymutil functionality
based on LLVM. dsymutil is a DWARF linker. Darwin's linker (ld64) does
not link the debug information, it leaves it in the object files in
relocatable form, but embbeds a `debug map` into the executable that
describes where to find the debug information and how to relocate it.
When releasing/archiving a binary, dsymutil is called to link all the DWARF
information into a `dsym bundle` that can distributed/stored along with
the binary.
With this commit, the LLVM based dsymutil is just able to parse the STABS
debug maps embedded by ld64 in linked binaries (and not all of them, for
example archives aren't supported yet).
Note that the tool directory is called dsymutil, but the executable is
currently called llvm-dsymutil. This discrepancy will disappear once the
tool will be feature complete. At this point the executable will be renamed
to dsymutil, but until then you do not want it to override the system one.
Differential Revision: http://reviews.llvm.org/D6242
llvm-svn: 224134
The goal of this tool is to replicate Darwin's dsymutil functionality
based on LLVM. dsymutil is a DWARF linker. Darwin's linker (ld64) does
not link the debug information, it leaves it in the object files in
relocatable form, but embbeds a `debug map` into the executable that
describes where to find the debug information and how to relocate it.
When releasing/archiving a binary, dsymutil is called to link all the DWARF
information into a `dsym bundle` that can distributed/stored along with
the binary.
With this commit, the LLVM based dsymutil is just able to parse the STABS
debug maps embedded by ld64 in linked binaries (and not all of them, for
example archives aren't supported yet).
Note that the tool directory is called dsymutil, but the executable is
currently called llvm-dsymutil. This discrepancy will disappear once the
tool will be feature complete. At this point the executable will be renamed
to dsymutil, but until then you do not want it to override the system one.
Differential Revision: http://reviews.llvm.org/D6242
llvm-svn: 223793
Richard Smith