Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
> llvm-svn: 366860
llvm-svn: 366897
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
llvm-svn: 366860
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch extend numeric expression to
support an arbitrary number of operands, either variable or literals.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60387
llvm-svn: 366001
Sphinx allows for definitions of command-line options using
`.. option <name>` and references to those options via `:option:<name>`.
However, it looks like there is no scoping of these options by default,
meaning that links can end up pointing to incorrect documents. See for
example the llvm-mca document, which contains references to -o that,
prior to this patch, pointed to a different document. What's worse is
that these links appear to be non-deterministic in which one is picked
(on my machine, some references end up pointing to opt, whereas on the
live docs, they point to llvm-dwarfdump, for example).
The fix is to add the .. program <name> tag. This essentially namespaces
the options (definitions and references) to the named program, ensuring
that the links are kept correct.
Reviwed by: andreadb
Differential Revision: https://reviews.llvm.org/D63873
llvm-svn: 364538
Summary:
Stop referring to "numeric expression", using simply the term
"expression" instead. Likewise for numeric operation since operations
are only used in numeric expressions.
Reviewers: jhenderson, jdenny, probinson, arichardson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63500
llvm-svn: 363901
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch introduces support for defining
numeric variable in a CHECK directive.
This commit introduces support for defining numeric variable from a
litteral value in the input text. Numeric expressions can then use the
variable provided it is on a later line.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60386
llvm-svn: 362705
Summary:
Terminology introduced by [[#]] blocks is confusing and does not
integrate well with existing terminology.
First, variables referred by [[]] blocks are called "pattern variables"
while the text a CHECK directive needs to match is called a "CHECK
pattern". This is inconsistent with variables in [[#]] blocks since
[[#]] blocks are also found in CHECK pattern yet those variables are
called "numeric variable".
Second, the replacing of both [[]] and [[#]] blocks by the value of the
variable or expression they contain is represented by a
FileCheckPatternSubstitution class. The naming refers to being a
substitution in a CHECK pattern but could be wrongly understood as being
a substitution of a pattern variable.
Third and lastly, comments use "numeric expression" to refer both to the
[[#]] blocks as well as to the numeric expressions these blocks contain
which get evaluated at match time.
This patch solves these confusions by
- calling variables in [[]] and [[#]] blocks as string and numeric
variables respectively;
- referring to [[]] and [[#]] as substitution *blocks*, with the former
being a string substitution block and the latter a numeric
substitution block;
- calling [[]] and [[#]] blocks to be replaced by the value of a
variable or expression they contain a substitution (as opposed to
definition when these blocks are used to defined a variable), with the
former being a string substitution and the latter a numeric
substitution;
- renaming the FileCheckPatternSubstitution as a FileCheckSubstitution
class with FileCheckStringSubstitution and
FileCheckNumericSubstitution subclasses;
- restricting the use of "numeric expression" to refer to the expression
that is evaluated in a numeric substitution.
While numeric substitution blocks only support numeric substitutions of
numeric expressions at the moment there are plans to augment numeric
substitution blocks to support numeric definitions as well as both a
numeric definition and numeric substitution in the same numeric
substitution block.
Reviewers: jhenderson, jdenny, probinson, arichardson
Subscribers: hiraditya, arichardson, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62146
llvm-svn: 361445
Summary:
Change example of input text from being llvm block to being gas block
since that text is made-up assembly.
Reviewers: jhenderson, jdenny, probinson, arichardson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61893
llvm-svn: 360781
This reinstates r360578 (git e47362c1ec),
reverted in r360653 (git 004393681c),
with a fix for the list added in FileCheck.rst to build without error.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar,
arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar,
arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60385
llvm-svn: 360665
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch introduces regular numeric
variables which can be set on the command-line.
This commit introduces regular numeric variable that can be set on the
command-line with the -D option to a numeric value. They can then be
used in CHECK patterns in numeric expression with the same shape as
@LINE numeric expression, ie. VAR, VAR+offset or VAR-offset where offset
is an integer literal.
The commit also enable strict whitespace in the verbose.txt testcase to
check that the position or the location diagnostics. It fixes one of the
existing CHECK in the process which was not accurately testing a
location diagnostic (ie. the diagnostic was correct, not the CHECK).
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60385
llvm-svn: 360578
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch introduces the @LINE numeric
expressions.
This commit introduces a new syntax to express a relation a numeric
value in the input text must have with the line number of a given CHECK
pattern: [[#<@LINE numeric expression>]]. Further commits build on that
to express relations between several numeric values in the input text.
To help with naming, regular variables are renamed into pattern
variables and old @LINE expression syntax is referred to as legacy
numeric expression.
Compared to existing @LINE expressions, this new syntax allow arbitrary
spacing between the component of the expression. It offers otherwise the
same functionality but the commit serves to introduce some of the data
structure needed to support more general numeric expressions.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60384
llvm-svn: 359741
The old diagnostic form of the trace produced by -v and -vv looks
like:
```
check1:1:8: remark: CHECK: expected string found in input
CHECK: abc
^
<stdin>:1:3: note: found here
; abc def
^~~
```
When dumping annotated input is requested (via -dump-input), I find
that this old trace is not useful and is sometimes harmful:
1. The old trace is mostly redundant because the same basic
information also appears in the input dump's annotations.
2. The old trace buries any error diagnostic between it and the input
dump, but I find it useful to see any error diagnostic up front.
3. FILECHECK_OPTS=-dump-input=fail requests annotated input dumps only
for failed FileCheck calls. However, I have to also add -v or -vv
to get a full set of annotations, and that can produce massive
output from all FileCheck calls in all tests. That's a real
problem when I run this in the IDE I use, which grinds to a halt as
it tries to capture all that output.
When -dump-input=fail|always, this patch suppresses the old trace from
-v or -vv. Error diagnostics still print as usual. If you want the
old trace, perhaps to see variable expansions, you can set
-dump-input=none (the default).
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D55825
llvm-svn: 351881
Extend FileCheck to dump its input annotated with FileCheck's
diagnostics: errors, good matches if -v, and additional information if
-vv. The goal is to make it easier to visualize FileCheck's matching
behavior when debugging.
Each patch in this series implements input annotations for a
particular category of FileCheck diagnostics. While the first few
patches alone are somewhat useful, the annotations become much more
useful as later patches implement annotations for -v and -vv
diagnostics, which show the matching behavior leading up to the error.
This first patch implements boilerplate plus input annotations for
error diagnostics reporting that no matches were found for a
directive. These annotations mark the search ranges of the failed
directives. Instead of using the usual `^~~`, which is used by later
patches for good matches, these annotations use `X~~` so that this
category of errors is visually distinct.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- colors error
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^Input file/,$p'
Input file: <stdin>
Check file: check1
-dump-input=help describes the format of the following dump.
Full input was:
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3 X~~~~~~~~ error: no match found
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
Some additional details related to the boilerplate:
* Enabling: The annotated input dump is enabled by `-dump-input`,
which can also be set via the `FILECHECK_OPTS` environment variable.
Accepted values are `help`, `always`, `fail`, or `never`. As shown
above, `help` describes the format of the dump. `always` is helpful
when you want to investigate a successful FileCheck run, perhaps for
an unexpected pass. `-dump-input-on-failure` and
`FILECHECK_DUMP_INPUT_ON_FAILURE` remain as a deprecated alias for
`-dump-input=fail`.
* Diagnostics: The usual diagnostics are not suppressed in this mode
and are printed first. For brevity in the example above, I've
omitted them using a sed command. Sometimes they're perfectly
sufficient, and then they make debugging quicker than if you were
forced to hunt through a dump of long input looking for the error.
If you think they'll get in the way sometimes, keep in mind that
it's pretty easy to grep for the start of the input dump, which is
`<<<`.
* Colored Annotations: The annotated input is colored if colors are
enabled (enabling colors can be forced using -color). For example,
errors are red. However, as in the above example, colors are not
vital to reading the annotations.
I don't know how to test color in the output, so any hints here would
be appreciated.
Reviewed By: george.karpenkov, zturner, probinson
Differential Revision: https://reviews.llvm.org/D52999
llvm-svn: 349418
In some cases it is desirable to match the same pattern repeatedly
many times. Currently the only way to do it is to copy the same
check pattern as many times as needed. And that gets pretty unwieldy
when its more than count is big.
Introducing CHECK-COUNT-<num> directive which acts like a plain CHECK
directive yet matches the same pattern exactly <num> times.
Extended FileCheckType to a struct to add Count there.
Changed some parsing routines to handle non-fixed length of directive
(all currently existing directives were fixed-length).
The code is generic enough to allow future support for COUNT in more
than just PlainCheck directives.
See motivating example for this feature in reviews.llvm.org/D54223.
Reviewed By: chandlerc, dblaikie
Differential Revision: https://reviews.llvm.org/D54336
llvm-svn: 346722
This feature makes it easy to tune FileCheck diagnostic output when
running the test suite via ninja, a bot, or an IDE. For example:
```
$ FILECHECK_OPTS='-color -v -dump-input-on-failure' \
LIT_FILTER='OpenMP/for_codegen.cpp' ninja check-clang \
| less -R
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D53517
llvm-svn: 346272
(Relands r344930, reverted in r344935, and now hopefully fixed for
Windows.)
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere, zturner
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 345202
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 344930
-v prints all directive pattern matches.
-vv additionally prints info that might be noise to users but that can
be helpful to FileCheck developers.
To maximize code reuse and to make diagnostics more consistent, this
patch also adjusts and extends some of the existing diagnostics.
CHECK-NOT failures now report variables uses. Many more diagnostics
now report the check prefix and kind of directive.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47114
llvm-svn: 336967
That is, make CHECK-DAG skip matches that overlap the matches of any
preceding consecutive CHECK-DAG directives. This change makes
CHECK-DAG more consistent with other directives, and there is evidence
it makes CHECK-DAG more intuitive and less error-prone. See the RFC
discussion starting at:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123010.html
Moreover, this behavior enables CHECK-DAG groups for unordered,
non-unique strings or patterns. For example, it is useful for
verifying output or logs from a parallel program, such as the OpenMP
runtime.
This patch also implements the command-line option
-allow-deprecated-dag-overlap, which reverts CHECK-DAG to the old
overlapping behavior. This option should not be used in new tests.
It is meant only for the existing tests that are broken by this change
and that need time to update.
See the following bugzilla issue for tracking of such tests:
https://bugs.llvm.org/show_bug.cgi?id=37532
Patches to add -allow-deprecated-dag-overlap to those tests will
follow immediately.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47106
llvm-svn: 336847
That is, make CHECK-DAG skip matches that overlap the matches of any
preceding consecutive CHECK-DAG directives. This change makes
CHECK-DAG more consistent with other directives, and there is evidence
it makes CHECK-DAG more intuitive and less error-prone. See the RFC
discussion starting at:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123010.html
Moreover, this behavior enables CHECK-DAG groups for unordered,
non-unique strings or patterns. For example, it is useful for
verifying output or logs from a parallel program, such as the OpenMP
runtime.
This patch also implements the command-line option
-allow-deprecated-dag-overlap, which reverts CHECK-DAG to the old
overlapping behavior. This option should not be used in new tests.
It is meant only for the existing tests that are broken by this change
and that need time to update.
See the following bugzilla issue for tracking of such tests:
https://bugs.llvm.org/show_bug.cgi?id=37532
Patches to add -allow-deprecated-dag-overlap to those tests will
follow immediately.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47106
llvm-svn: 336830
Prior to this change, there was no clean way of getting FileCheck to
check that a line is completely empty. The expected way of using
"CHECK: {{^$}}" does not work because the '^' matches the end of the
previous match (this behaviour may be desirable in certain instances).
For the same reason, "CHECK-NEXT: {{^$}}" will fail when the previous
match was at the end of the line, as the pattern will match there.
Using the recommended [[:space:]] to match an explicit new line could
also match a space, and thus is not always desired. Literal '\n'
matches also do not work. A workaround was suggested in the review, but
it is a little clunky.
This change adds a new directive that behaves the same as CHECK-NEXT,
except that it only matches against empty lines (nothing, not even
whitespace, is allowed). As with CHECK-NEXT, it will fail if more than
one newline occurs before the next blank line. Example usage:
; test.txt
foo
bar
; CHECK: foo
; CHECK-EMPTY:
; CHECK-NEXT: bar
Differential Revision: https://reviews.llvm.org/D28896
Reviewed by: probinson
llvm-svn: 335613
Summary:
This makes it very easy to test files that only differ in a constant
value somewhere in the test case.
Reviewers: jlebar, hfinkel, chandlerc, probinson
Reviewed By: probinson
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D39629
llvm-svn: 317572
Minor doc update that the FileCheck matcher supports POSIX ERE.
It also fixes a minor issue in the regexp describing a variable
name: underscores are allowed too.
Differential Revision: https://reviews.llvm.org/D38787
llvm-svn: 315679
If `--enable-var-scope` is in effect, variables with names that
start with `$` are considered to be global. All other variables are
local. All local variables get undefined at the beginning of each
CHECK-LABEL block. Global variables are not affected by CHECK-LABEL.
This makes it easier to ensure that individual tests are not affected
by variables set in preceding tests.
Differential Revision: https://reviews.llvm.org/D30749
llvm-svn: 297396
Lots of blocks had "llvm" or "nasm" syntax types but either weren't following
the syntax, or the syntax has changed (and sphinx hasn't keep up) or the type
doesn't even exist (nasm?).
Other documents had :options: what were invalid. I only removed those that had
warnings, and left the ones that didn't, in order to follow the principle of
least surprise.
This is like this for ages, but the buildbot is now failing on errors. It may
take a while to upgrade the buildbot's sphinx, if that's even possible, but
that shouldn't stop us from getting docs updates (which seem down for quite
a while).
Also, we're not losing any syntax highlight, since when it doesn't parse, it
doesn't colour. Ie. those blocks are not being highlighted anyway.
I'm trying to get all docs in one go, so that it's easy to revert later if we
do fix, or at least easy to know what's to fix.
llvm-svn: 276109
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Summary:
Add FileCheck -implicit-check-not option which allows specifying a
pattern that should only occur in the input when explicitly matched by a
positive check. This feature allows checking tool diagnostics in a way
clang -verify does it for compiler diagnostics.
The option has been tested on a number of clang-tidy checks, I'll post a link to
the clang-tidy patch to this thread.
Once there's an agreement on the general direction, I can add tests and
documentation.
Reviewers: djasper, bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4462
llvm-svn: 212810
CHECK-LABEL is meant to be used in place on CHECK on lines containing identifiers or other unique labels (they need not actually be labels in the source or output language, though.) This is used to break up the input stream into separate blocks delineated by CHECK-LABEL lines, each of which is checked independently. This greatly improves the accuracy of errors and fix-it hints in many cases, and allows for FileCheck to recover from errors in one block by continuing to subsequent blocks.
Some tests will be converted to use this new directive in forthcoming patches.
llvm-svn: 186162
Thomas Preud'homme