I based this off of the API already create for llvm.dbg.value since both
intrinsics have the same arguments at the API level.
I added some tests exercising the API a little as well as an additional small
test that shows how one can use llvm.dbg.addr to limit the PC range where an
address value is available in the debugger. This is done by calling
llvm.dbg.value with undef and the same metadata info as one used to create the
llvm.dbg.addr.
rdar://83957028
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D117442
llvm.vp.merge interprets the %evl operand differently than the other vp
intrinsics: all lanes at positions greater or equal than the %evl
operand are passed through from the second vector input. Otherwise it
behaves like llvm.vp.select.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D116725
Track all GlobalObjects that reference a given comdat, which allows
determining whether a function in a comdat is dead without scanning
the whole module.
In particular, this makes filterDeadComdatFunctions() have complexity
O(#DeadFunctions) rather than O(#SymbolsInModule), which addresses
half of the compile-time issue exposed by D115545.
Differential Revision: https://reviews.llvm.org/D115864
This class is solely used as a lightweight and clean way to build a set of
attributes to be removed from an AttrBuilder. Previously AttrBuilder was used
both for building and removing, which introduced odd situation like creation of
Attribute with dummy value because the only relevant part was the attribute
kind.
Differential Revision: https://reviews.llvm.org/D116110
The recursive implementation can run into stack overflows, e.g. like in PR52844.
The order the users are visited changes, but for the current use case
this only impacts the order error messages are emitted.
The LangRef incorrectly says that if no exact match is found when
seeking alignment for a vector type, the largest vector type smaller
than the sought-after vector type. This is incorrect as vector types
require an exact match, else they fall back to reporting the natural
alignment.
The corrected rule was not added in its place, as rules for other types
(e.g., floating-point types) aren't documented.
A unit test was added to demonstrate this.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D112463
The vp.load and vp.gather intrinsics require the intrinsic return
type to determine the correct function signature. With opaque pointers,
it cannot be derived from the parameter pointee types.
Differential Revision: https://reviews.llvm.org/D115632
As mentioned in D106585, this causes non-determinism, which can also be
shown by this test case being flaky without this patch.
We were using the APSInt's bit width for hashing, but not for checking
for equality. APInt::isSameValue() does not check bit width.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D115054
We needed a stricter version of m_Not for D114462, but I wasn't
sure if that was going to be required anywhere else, so I didn't bother
to make that reusable.
It turns out we have one more existing simplification that needs
this (currently miscompiles):
https://alive2.llvm.org/ce/z/9-nTKi
And there's at least one more fold in that family that we could add.
Differential Revision: https://reviews.llvm.org/D114882
Deprecate LLVMAddAlias in favor of LLVMAddAlias2, which accepts a
value type and an address space. Previously these were extracted
from the pointer type.
Differential Revision: https://reviews.llvm.org/D114860
When creating a new DIBuilder with an existing DICompileUnit, load the
DINodes from the current DICompileUnit so they don't get overwritten.
This is done in the MachineOutliner pass, but it didn't change the CU so
the bug never appeared. We need this if we ever want to add DINodes to
the CU after it has been created, e.g., DIGlobalVariables.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D114556
Usage and naming of macros in VPIntrinsics.def has been inconsistent. Rename all property macros to VP_PROPERTY_<name>. Use BEGIN/END scope macros to attach properties to vp intrinsics and SDNodes (instead of specifying either directly with the property macro).
A follow-up patch has documentation on how the macros are (intended) to be used.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D114144
Currently the stepvector intrinsic only supports element types that
are integers of size 8 bits or more. This patch adds support for the
creation of stepvectors with smaller element types by creating
the intrinsic with i8 elements that we then truncate to the requested
size.
It's not currently possible to write a vectoriser test to exercise
this code path so I have added a unit test here:
llvm/unittests/IR/IRBuilderTest.cpp
Differential Revision: https://reviews.llvm.org/D113767
ProfileCount could model invalid values, but a user had no indication
that the getCount method could return bogus data. Optional<ProfileCount>
addresses that, because the user must dereference the optional. In
addition, the patch removes concept duplication.
Differential Revision: https://reviews.llvm.org/D113839
For some optimizations on comparisons it's necessary that the
union/intersect is exact and not a superset. Add methods that
return Optional<ConstantRange> only if the result is exact.
For the sake of simplicity this is implemented by comparing
the subset and superset approximations for now, but it should be
possible to do this more directly, as unionWith() and intersectWith()
already distinguish the cases where the result is imprecise for the
preferred range type functionality.
Fix a dangling else that gcc-11 warned about. The EXPECT_EQ macro
expands to an if-else, so the whole construction contains a hidden
dangling else.
Differential Revision: https://reviews.llvm.org/D113346
Add a variant of getEquivalentICmp() that produces an optional
offset. This allows us to create an equivalent icmp for all ranges.
Use this in the with.overflow folding code, which was doing this
adjustment separately -- this clarifies that the fold will indeed
always apply.
When we have an actual shuffle, we can impose the additional restriction
that the mask replicates the elements of the first operand, so we know
the replication factor as a ratio of output and op0 vector sizes.
These tests have pretty high O() complexity due to their nature,
which leads to potentially-long runtimes.
While in release build for me they took ~1 and ~2 sec,
as noted in https://reviews.llvm.org/D113214#inline-1080479
they take minutes in debug build.
Fine-tune the amount of permutations they deal with,
without affecting the test coverage. After this,
they take <~10ms each for me (in release build),
hopefully that is good-enough for debug build too.
Avid readers of this saga may recall from previous installments,
that replication mask replicates (lol) each of the `VF` elements
in a vector `ReplicationFactor` times. For example, the mask for
`ReplicationFactor=3` and `VF=4` is: `<0,0,0,1,1,1,2,2,2,3,3,3>`.
More importantly, replication mask is used by LoopVectorizer
when using masked interleaved memory operations.
As discussed in previous installments, while it is used by LV,
and we **seem** to support masked interleaved memory operations on X86,
it's support in cost model leaves a lot to be desired:
until basically yesterday even for AVX512 we had no cost model for it.
As it has been witnessed in the recent
AVX2 `X86TTIImpl::getInterleavedMemoryOpCost()`
costmodel patches, while it is hard-enough to query the cost
of a particular assembly sequence [from llvm-mca],
afterwards the check lines LV costmodel tests must be updated manually.
This is, at the very least, boring.
Okay, now we have decent costmodel coverage for interleaving shuffles,
but now basically the same mind-killing sequence has to be performed
for replication mask. I think we can improve at least the second half
of the problem, by teaching
the `TargetTransformInfoImplCRTPBase::getUserCost()` to recognize
`Instruction::ShuffleVector` that are repetition masks,
adding exhaustive test coverage
using `-cost-model -analyze` + `utils/update_analyze_test_checks.py`
This way we can have good exhaustive coverage for cost model,
and only basic coverage for the LV costmodel.
This patch adds precise undef-aware `isReplicationMask()`,
with exhaustive test coverage.
* `InstructionsTest.ShuffleMaskIsReplicationMask` shows that
it correctly detects all the known masks.
* `InstructionsTest.ShuffleMaskIsReplicationMask_undef`
shows that replacing some mask elements in a known replication mask
still allows us to recognize it as a replication mask.
Note, with enough undef elts, we may detect a different tuple.
* `InstructionsTest.ShuffleMaskIsReplicationMask_Exhaustive_Correctness`
shows that if we detected the replication mask with given params,
then if we actually generate a true replication mask with said params,
it matches element-wise ignoring undef mask elements.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D113214
By default `llvm::seq` would happily iterate over enums, which may be unsafe if the enum values are not continuous. This patch disable enum iteration with `llvm::seq` and `llvm::seq_inclusive` and adds two new functions: `enum_seq` and `enum_seq_inclusive`.
To make sure enum iteration is safe, we require users to declare their enum types as iterable by specializing `enum_iteration_traits<SomeEnum>`. Because it's not always possible to add these traits next to enum definition (e.g., for enums defined in external libraries), we provide an escape hatch to allow iteration on per-callsite basis by passing `force_iteration_on_noniterable_enum`.
The main benefit of this approach is that these global declarations via traits can appear just next to enum definitions, making easy to spot when enums are miss-labeled, e.g., after introducing new enum values, whereas `force_iteration_on_noniterable_enum` should stand out and be easy to grep for.
This emerged from a discussion with gchatelet@ about reusing llvm's `Sequence.h` in lieu of https://github.com/GPUOpen-Drivers/llpc/blob/dev/lgc/interface/lgc/EnumIterator.h.
Reviewed By: dblaikie, gchatelet, aaron.ballman
Differential Revision: https://reviews.llvm.org/D107378
For certain combination of LHS and RHS constant ranges,
the signedness of the relational comparison predicate is irrelevant.
This implements complete and precise model for all predicates,
as confirmed by the brute-force tests. I'm not sure if there are
some more cases that we can handle here.
In a follow-up, CVP will make use of this.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D90924
As noted in https://reviews.llvm.org/D90924#inline-1076197
apparently this is a pretty common pattern,
let's not repeat it yet again, but have it in a common place.
There may be some more places where it could be used,
but these are the most obvious ones.
There's precedent for that in `CreateOr()`/`CreateAnd()`.
The motivation here is to avoid bloating the run-time check's IR
in `SCEVExpander::generateOverflowCheck()`.
Refs. https://reviews.llvm.org/D109368#3089809
Otherwise, ODRUniquing would map some member method/variable MDNodes
to have enum type DIScope, resulting in invalid debug info and bad
DWARF.
- Add a Verifier check that when a 'scope:' operand is an ODR type that is not an enum.
- Makes ODRUniquing apply to only ODR types with the same tag so that the debuginfo/DWARF is well-formed.
Reviewed By: probinson, aprantl
Differential Revision: https://reviews.llvm.org/D111770
As discussed in:
* https://reviews.llvm.org/D94166
* https://lists.llvm.org/pipermail/llvm-dev/2020-September/145031.html
The GlobalIndirectSymbol class lost most of its meaning in
https://reviews.llvm.org/D109792, which disambiguated getBaseObject
(now getAliaseeObject) between GlobalIFunc and everything else.
In addition, as long as GlobalIFunc is not a GlobalObject and
getAliaseeObject returns GlobalObjects, a GlobalAlias whose aliasee
is a GlobalIFunc cannot currently be modeled properly. Creating
aliases for GlobalIFuncs does happen in the wild (e.g. glibc). In addition,
calling getAliaseeObject on a GlobalIFunc will currently return nullptr,
which is undesirable because it should return the object itself for
non-aliases.
This patch refactors the GlobalIFunc class to inherit directly from
GlobalObject, and removes GlobalIndirectSymbol (while inlining the
relevant parts into GlobalAlias and GlobalIFunc). This allows for
calling getAliaseeObject() on a GlobalIFunc to return the GlobalIFunc
itself, making getAliaseeObject() more consistent and enabling
alias-to-ifunc to be properly modeled in the IR.
I exercised some judgement in the API clients of GlobalIndirectSymbol:
some were 'monomorphized' for GlobalAlias and GlobalIFunc, and
some remained shared (with the type adapted to become GlobalValue).
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D108872
The multiply() implementation is very slow -- it performs six
multiplications in double the bitwidth, which means that it will
typically work on allocated APInts and bypass fast-path
implementations. Add an additional implementation that doesn't
try to produce anything better than a full range if overflow is
possible. At least for the BasicAA use-case, we really don't care
about more precise modeling of overflow behavior. The current
use of multiply() is fine while the implementation is limited to
a single index, but extending it to the multiple-index case makes
the compile-time impact untenable.
For the common case where the shift amount is constant (a single
element range) we can easily compute a precise range (up to
unsigned envelope), so do that.
We always want to check correctness, but for some operations we
can only guarantee optimality for a subset of inputs. Accept an
additional predicate that determines whether optimality for a
given pair of ranges should be checked.
Print a friendly error message including the inputs, result and
not-contained element if an exhaustive correctness test fails,
same as we do if the optimality test fails.
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
This patch adds the functionalities to print MDNode in tree shape. For
example, instead of printing a MDNode like this:
```
<0x5643e1166888> = !DILocalVariable(name: "foo", arg: 2, scope: <0x5643e11c9740>, file: <0x5643e11c6ec0>, line: 8, type: <0x5643e11ca8e0>, flags: DIFlagPublic | DIFlagFwdDecl, align: 8)
```
The printTree/dumpTree functions can give you:
```
<0x5643e1166888> = !DILocalVariable(name: "foo", arg: 2, scope: <0x5643e11c9740>, file: <0x5643e11c6ec0>, line: 8, type: <0x5643e11ca8e0>, flags: DIFlagPublic | DIFlagFwdDecl, align: 8)
<0x5643e11c9740> = distinct !DISubprogram(scope: null, spFlags: 0)
<0x5643e11c6ec0> = distinct !DIFile(filename: "file.c", directory: "/path/to/dir")
<0x5643e11ca8e0> = distinct !DIDerivedType(tag: DW_TAG_pointer_type, baseType: <0x5643e11668d8>, size: 1, align: 2)
<0x5643e11668d8> = !DIBasicType(tag: DW_TAG_unspecified_type, name: "basictype")
```
Which is useful when using it in debugger. Where sometimes printing the
whole module to see all MDNodes is too expensive.
Differential Revision: https://reviews.llvm.org/D110113
This patch introduces the vector-predicated version of the
experimental_vector_splice intrinsic [1] at the IR level. It considers
the active vector length for both vectors and and uses a vector mask to
disable certain lanes in the result.
[1] https://reviews.llvm.org/D94708
Change originally authored by Vineet Kumar <vineet.kumar@bsc.es>
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D103898
This patch is for fixing potential insertElement-related bugs like D93818.
```
V = UndefValue::get(VecTy);
for(...)
V = Builder.CreateInsertElementy(V, Elt, Idx);
=>
V = PoisonValue::get(VecTy);
for(...)
V = Builder.CreateInsertElementy(V, Elt, Idx);
```
Like above, this patch changes the placeholder V to poison.
The patch will be separated into several commits.
Reviewed By: aqjune
Differential Revision: https://reviews.llvm.org/D110311
- This patch adds in the GOFF mangling support to the LLVM data layout string. A corresponding additional line has been added into the data layout section in the language reference documentation.
- Furthermore, this patch also sets the right data layout string for the z/OS target in the SystemZ backend.
Reviewed By: uweigand, Kai, abhina.sreeskantharajan, MaskRay
Differential Revision: https://reviews.llvm.org/D109362
New field `elements` is added to '!DIImportedEntity', representing
list of aliased entities.
This is needed to dump optimized debugging information where all names
in a module are imported, but a few names are imported with overriding
aliases.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D109343
Michael Gottesman