This accounts for a large portion of the memory allocations in LLD.
This DebugSubsectionRecordBuilder object can be stored directly in
C13Builders, it mostly wraps other subsections.
Remove the container kind field from the object. It is always the same
for all elements in the vector, and we can pass it in during writing.
Currently we have computations of `p_filesz` and `p_memsz` mixed together
with the use of a loop over fragments. After recent changes it is possible to
avoid using a loop for the computation of `p_filesz`, since we know that fragments
are sorted by their file offsets.
The main benefit of this change is that splits the computation of `p_filesz`
and `p_memsz` what is simpler and allows us to fix the computation of the
`p_memsz` independently (D78005 shows the issue that we have currently).
Differential revision: https://reviews.llvm.org/D78628
It allows to simplify the current code and also
might help for the code around.
It is also consistent with what we do for another headers,
e.g. section headers, elf file header etc.
Differential revision: https://reviews.llvm.org/D78627
Add support for relocations for MachO to ObjectYAML / yaml2obj / obj2yaml.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D77844
The `Offset` field is used to set the file offset of a program header.
In a normal object it should not be greater than the minimal offset
of sections included into segment.
This patch adds a check for that and adds tests.
Differential revision: https://reviews.llvm.org/D78304
This validates that sections listed for a segment in the YAML
declaration are ordered by their file offsets.
It might help to simplify the file size computation, but also
is useful by itself as helps to avoid issues in test cases and
to maintain their readability.
Differential revision: https://reviews.llvm.org/D78361
Leverage ARM ELF build attribute section to create ELF attribute section
for RISC-V. Extract the common part of parsing logic for this section
into ELFAttributeParser.[cpp|h] and ELFAttributes.[cpp|h].
Differential Revision: https://reviews.llvm.org/D74023
This patch makes `Relocation::Addend` to be `ELFYAML::YAMLIntUInt` and not `int64_t`.
`ELFYAML::YAMLIntUInt` it is a new type and it has the following benefits/features:
1) For an 64-bit object any hex/decimal addends
in the range [INT64_MIN, UINT64_MAX] is accepted.
2) For an 32-bit object any hex/decimal addends
in range [INT32_MIN, UINT32_MAX] is accepted.
3) Negative hex numbers like -0xffffffff are not accepted.
4) It is printed as decimal. I.e. obj2yaml will print
something like "Addend: 125", this matches the current behavior.
This fixes all FIXMEs in `relocation-addend.yaml`.
Differential revision: https://reviews.llvm.org/D75527
`PAddr` corresponds to `p_paddr` of a program header, which is the segment's physical
address for systems in which physical addressing is relevant. `p_paddr` is often equal
to `p_vaddr`, which is the virtual address of a segment.
This patch changes the default for `PAddr` from 0 to a value of `VAddr`.
Differential revision: https://reviews.llvm.org/D76131
Currently `yaml2obj` require `Offset` field in a relocation description.
There are many cases when `Offset` is insignificant in a context of a test case.
Making `Offset` optional allows to simplify our test cases.
This is what this patch does.
Also, with this patch `obj2yaml` does not dump a zero offset of a relocation.
Differential revision: https://reviews.llvm.org/D75608
I've noticed that it is not convenient to create YAMLs from
binaries (using obj2yaml) that have to be test cases for obj2yaml
later (after applying yaml2obj).
The problem, for example is that obj2yaml emits "DynamicSymbols:"
key instead of .dynsym. It also does not create .dynstr.
And when a YAML document without explicitly defined .dynsym/.dynstr
is given to yaml2obj, we have issues:
1) These sections are placed after non-allocatable sections (I've fixed it in D74756).
2) They have VA == 0. User needs create descriptions for such sections explicitly manually
to set a VA.
This patch addresses (2). I suggest to let yaml2obj assign virtual addresses by itself.
It makes an output binary to be much closer to "normal" ELF.
(It is still possible to use "Address: 0x0" for a section to get the original behavior
if it is needed)
Differential revision: https://reviews.llvm.org/D74764
.dynsym and .dynstr are allocatable and therefore normally are placed
before non-allocatable .strtab, .shstrtab, .symtab sections.
But we are placing them after currently what creates a mix of
alloc/non-alloc sections and does not look normal.
Differential revision: https://reviews.llvm.org/D74756
Previously the description allowed to describe symbols with use of
`Name` and `Index` keys. This patch removes them and now it is still
possible to use either names or symbol indexes, but the code is simpler
and the format is slightly different.
Such a change will be useful for another patches, e.g:
https://reviews.llvm.org/D73788#inline-671077
Differential revision: https://reviews.llvm.org/D73888
We are missing ability to override the sh_entsize field for
SHT_REL[A] sections. It would be useful for writing test cases.
Differential revision: https://reviews.llvm.org/D73621
Note: this is a reland with a trivial 2 lines fix in ELFState<ELFT>::writeSectionContent.
It adds a check similar to ones we already have for other sections to fix the case revealed
by bots, like http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/60744.
The encoded sequence of Elf*_Relr entries in a SHT_RELR section looks
like [ AAAAAAAA BBBBBBB1 BBBBBBB1 ... AAAAAAAA BBBBBB1 ... ]
i.e. start with an address, followed by any number of bitmaps. The address
entry encodes 1 relocation. The subsequent bitmap entries encode up to 63(31)
relocations each, at subsequent offsets following the last address entry.
More information is here:
https://github.com/llvm-mirror/llvm/blob/master/lib/Object/ELF.cpp#L272
This patch adds a support for these sections.
Differential revision: https://reviews.llvm.org/D71872
The encoded sequence of Elf*_Relr entries in a SHT_RELR section looks
like [ AAAAAAAA BBBBBBB1 BBBBBBB1 ... AAAAAAAA BBBBBB1 ... ]
i.e. start with an address, followed by any number of bitmaps. The address
entry encodes 1 relocation. The subsequent bitmap entries encode up to 63(31)
relocations each, at subsequent offsets following the last address entry.
More information is here:
https://github.com/llvm-mirror/llvm/blob/master/lib/Object/ELF.cpp#L272
This patch adds a support for these sections.
Differential revision: https://reviews.llvm.org/D71872
There was no way to set an unsupported or unknown OS ABI.
With this patch it is possible to use any numeric value.
Differential revision: https://reviews.llvm.org/D71765
Currently we have the `Flags` property that allows to
set flags for a section. The problem is that it does not
allow us to set an arbitrary value, because of bit fields
validation under the hood. An arbitrary values can be used
to test specific broken cases.
We probably do not want to relax the validation, so this
patch adds a `ShSize` property that allows to
override the `sh_size`. It is inline with others `Sh*` properties
we have already.
Differential revision: https://reviews.llvm.org/D71411
The PT_GNU_PROPERTY is generated by a linker to describe the
.note.gnu.property section. The Linux kernel uses this program header to
locate the .note.gnu.property section.
It is described in "The Linux gABI extension"
Include support for llvm-readelf, llvm-readobj and the yaml reader and
writers.
Differential Revision: https://reviews.llvm.org/D70959
We already have Symbols property to list regular symbols and
it is currently Optional<>. This patch makes DynamicSymbols to be optional
too. With this there is no need to define a dummy symbol anymore to trigger
creation of the .dynsym and it is now possible to define an empty .dynsym using
just the following line:
DynamicSymbols: []
(it is important to have when you do not want to have dynamic symbols,
but want to have a .dynsym)
Now the code is consistent and it helped to fix a bug: previously we
did not report an error when both Content/Size and an empty
Symbols/DynamicSymbols list were specified.
Differential revision: https://reviews.llvm.org/D70956
This section contains strings specifying libraries to be added to the link by the linker.
The strings are encoded as standard null-terminated UTF-8 strings.
This patch adds a way to describe and dump SHT_LLVM_DEPENDENT_LIBRARIES sections.
I introduced a new YAMLFlowString type here. That used to teach obj2yaml to dump
them like:
```
Libraries: [ foo, bar ]
```
instead of the following (if StringRef would be used):
```
Libraries:
- foo
- bar
```
Differential revision: https://reviews.llvm.org/D70598
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
This recommits 089c0f5814, which was
reverted due to failing tests on big endian machines. It includes a fix
which I believe (I don't have BE machine) should fix this issue. The fix
consists of correcting the invocation DWARFYAML::EmitDebugSections,
which was missing one (default) function arguments, and so didn't
actually force the little-endian mode.
The original commit message follows.
Summary:
This patch adds DWARFDie::getLocations, which returns the location
expressions for a given attribute (typically DW_AT_location). It handles
both "inline" locations and references to the external location list
sections (currently only of the DW_FORM_sec_offset type). It is
implemented on top of DWARFUnit::findLoclistFromOffset, which is also
added in this patch. I tried to make their signatures similar to the
equivalent range list functionality.
The actual location list interpretation logic is in
DWARFLocationTable::visitAbsoluteLocationList. This part is not
equivalent to the range list code, but this deviation is motivated by a
desire to reuse the same location list parsing code within lldb.
The functionality is tested via a c++ unit test of the DWARFDie API.
Reviewers: dblaikie, JDevlieghere, SouraVX
Subscribers: mgorny, hiraditya, cmtice, probinson, llvm-commits, aprantl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70394
Summary:
This patch adds DWARFDie::getLocations, which returns the location
expressions for a given attribute (typically DW_AT_location). It handles
both "inline" locations and references to the external location list
sections (currently only of the DW_FORM_sec_offset type). It is
implemented on top of DWARFUnit::findLoclistFromOffset, which is also
added in this patch. I tried to make their signatures similar to the
equivalent range list functionality.
The actual location list interpretation logic is in
DWARFLocationTable::visitAbsoluteLocationList. This part is not
equivalent to the range list code, but this deviation is motivated by a
desire to reuse the same location list parsing code within lldb.
The functionality is tested via a c++ unit test of the DWARFDie API.
Reviewers: dblaikie, JDevlieghere, SouraVX
Subscribers: mgorny, hiraditya, cmtice, probinson, llvm-commits, aprantl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70394
Summary:
The tool does not correctly handle COFF sections with extended relocation tables (with IMAGE_SCN_LNK_NRELOC_OVFL bit set), this patch fixes this problem.
But I have cheated a bit in the test (to make it smaller) because extended relocation table is supposed to be used when the number of relocations exceeds 65534. Otherwise the test size would be pretty big.
Reviewers: jhenderson, MaskRay, mstorsjo
Reviewed By: mstorsjo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70251
SHT_LLVM_LINKER_OPTIONS section contains pairs of null-terminated strings.
This patch adds support for them.
Differential revision: https://reviews.llvm.org/D69895
Currently there is no way to describe the data that is not a part of an output section.
It can be a data used to align sections or to fill the gaps with something,
or another kind of custom data. In this patch I suggest a way to describe it. It looks like that:
```
Sections:
- Type: CustomFiller
Pattern: "CCDD"
Size: 4
- Name: .bar
Type: SHT_PROGBITS
Content: "FF"
```
I.e. I've added a kind of synthetic section with a synthetic type "CustomFiller".
In the code it is called a "SyntheticFiller", which is "a synthetic section which
might be used to write the custom data around regular output sections. It does
not present in the sections header table, but it might affect the output file size and
program headers produced. Think about it as about piece of data."
`SyntheticFiller` currently has a `Pattern` field and a `Size` field + an optional `Name`.
When written, `Size` of bytes in the output will be filled with a `Pattern`.
It is possible to reference a named filler it by name from the program headers description,
just like any other normal section.
Differential revision: https://reviews.llvm.org/D69709
Reid Kleckner