- Removed support for hexagonv3 and earlier.
- Added handling of hexagonv55 and hexagonv60.
- Added handling of target features (hvx, hvx-double).
- Updated paths to reflect current directory layout.
llvm-svn: 255502
Add/Subtract.
The following instructions are added to AArch32 instruction set:
- VQRDMLAH: Vector Saturating Rounding Doubling Multiply Accumulate
Returning High Half
- VQRDMLSH: Vector Saturating Rounding Doubling Multiply Subtract
Returning High Half
The following instructions are added to AArch64 instruction set:
- SQRDMLAH: Signed Saturating Rounding Doubling Multiply Accumulate
Returning High Half
- SQRDMLSH: Signed Saturating Rounding Doubling Multiply Subtract
Returning High Half
This patch adds intrinsic and ACLE macro support for these instructions,
as well as corresponding tests.
Differential Revision: http://reviews.llvm.org/D14982
llvm-svn: 254250
For MCU only C calling convention is allowed, all other calling conventions are not supported.
Differential Revision: http://reviews.llvm.org/D14864
llvm-svn: 254063
Summary: 's' is used to specify sgprs and 'v' is used to specify vgprs.
Reviewers: arsenm, echristo
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D14307
llvm-svn: 253610
Currently, when there is a global register variable in a program that
is bound to an invalid register, clang/llvm prints an error message that
is not very user-friendly.
This commit improves the diagnostic and moves the check that used to be
in the backend to Sema. In addition, it makes changes to error out if
the size of the register doesn't match the declared variable size.
e.g., volatile register int B asm ("rbp");
rdar://problem/23084219
Differential Revision: http://reviews.llvm.org/D13834
llvm-svn: 253405
The TargetParser API to get the default FPU and default extensions has
changed so that it can fall back to the architecture in case of a
generic CPU.
llvm-svn: 253199
is not defined for 32bit mode, but __sparcv9 is. Pass down the correct
-target-cpu flags to the backend, so that instruction restrictions are
applied correctly. Pass down the correct -A flag when not using IAS.
The latter is limited to NetBSD targets in this commit.
llvm-svn: 252545
This patch fixes one more thing in MCU psABI support: LongDoubleWidth should be set to 64.
Differential Revision: http://reviews.llvm.org/D14285
llvm-svn: 252156
This patch implements two things in front-end for MCU psABI support:
1) "long double type is the same as double."
2) "New predefined C/C++ pre-processor symbols: iamcu and iamcu__.
Differential Revision: http://reviews.llvm.org/D14205
llvm-svn: 251786
This sets the mostly expected Darwin default ABI options for these two
platforms. Active changes from these defaults for watchOS are in a later patch.
llvm-svn: 251708
GCC uses the x87DoubleExtended model for long doubles, and passes them
indirectly by address through function calls.
Also replace the existing mingw-long-double assembly emitting test with
an IR-level test.
llvm-svn: 251567
Previously, __weak was silently accepted and ignored in MRC mode.
That makes this a potentially source-breaking change that we have to
roll out cautiously. Accordingly, for the time being, actual support
for __weak references in MRC is experimental, and the compiler will
reject attempts to actually form such references. The intent is to
eventually enable the feature by default in all non-GC modes.
(It is, of course, incompatible with ObjC GC's interpretation of
__weak.)
If you like, you can enable this feature with
-Xclang -fobjc-weak
but like any -Xclang option, this option may be removed at any point,
e.g. if/when it is eventually enabled by default.
This patch also enables the use of the ARC __unsafe_unretained qualifier
in MRC. Unlike __weak, this is being enabled immediately. Since
variables are essentially __unsafe_unretained by default in MRC,
the only practical uses are (1) communication and (2) changing the
default behavior of by-value block capture.
As an implementation matter, this means that the ObjC ownership
qualifiers may appear in any ObjC language mode, and so this patch
removes a number of checks for getLangOpts().ObjCAutoRefCount
that were guarding the processing of these qualifiers. I don't
expect this to be a significant drain on performance; it may even
be faster to just check for these qualifiers directly on a type
(since it's probably in a register anyway) than to do N dependent
loads to grab the LangOptions.
rdar://9674298
llvm-svn: 251041
The logic for parsing FP capabilities to set __ARM_FP was mistakenly removing
the Half-Precision capability when handling fp-only-sp resulting in a value
of 0x4. Section 6.5.1 of ACLE states that for such FP architectures the value
should be 0x6
llvm-svn: 250888
Rationale :
// sse3
__m128d test_mm_addsub_pd(__m128d A, __m128d B) {
return _mm_addsub_pd(A, B);
}
// mmx
void shift(__m64 a, __m64 b, int c) {
_mm_slli_pi16(a, c);
_mm_slli_pi32(a, c);
_mm_slli_si64(a, c);
_mm_srli_pi16(a, c);
_mm_srli_pi32(a, c);
_mm_srli_si64(a, c);
_mm_srai_pi16(a, c);
_mm_srai_pi32(a, c);
}
clang -msse3 -mno-mmx file.c -c
For this code we should be able to explicitly turn off MMX
without affecting the compilation of the SSE3 function and then
diagnose and error on compiling the MMX function.
This is a preparatory patch to the actual diagnosis code which is
coming in a future patch. This sets us up to have the correct information
where we need it and verifies that it's being emitted for the backend
to handle.
llvm-svn: 249733
that we can build up an accurate set of features rather than relying on
TargetInfo initialization via handleTargetFeatures to munge the list
of features.
llvm-svn: 249732
Simplifying the convoluted CPU handling in ARMTargetInfo.
The default base CPU on ARM is ARM7TDMI, arch ARMv4T, and
ARMTargetInfo had a different one. This wasn't visible from
Clang because the driver selects the defaults and sets the
Arch/CPU features directly, but the constructor depended
on the CPU, which was never used.
This patch corrects the mistake and greatly simplifies
how CPU is dealt with (essentially by removing the duplicated
DefaultCPU field).
Tests updated.
llvm-svn: 249699
We support all __sync_val_compare_and_swap_* builtins (only 64-bit on 64-bit
targets) on all cores, and should define the corresponding
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_* macros, just as GCC does. As it turns out,
this is really important because they're needed to prevent a bad ODR violation
with libstdc++'s std::shared_ptr (this is well explained in PR12730).
We were doing this only for P8, but this is necessary on all PPC systems.
llvm-svn: 249009
Currently it's 64-bit which will lead to mismatch between host and
device code if we compile for i386.
Differential Revision: http://reviews.llvm.org/D13181
llvm-svn: 248753
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in
a hand-rolled tricky condition block in lib/Basic/Targets.cpp, with a FIXME:
attached.
http://reviews.llvm.org/D12937 moved the handling of the DSP feature over to
ARMTargetParser.def in LLVM, to be in line with other architecture extensions.
This is the corresponding patch to clang, to clear the FIXME: and update
the tests.
Differential Revision: http://reviews.llvm.org/D12938
llvm-svn: 248521
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in
a hand-rolled tricky condition block in lib/Basic/Targets.cpp, with a FIXME:
attached.
http://reviews.llvm.org/D12937 moved the handling of +t2dsp over to
ARMTargetParser.def in LLVM, to be in line with other architecture extensions.
This is the corresponding patch to clang, to clear the FIXME: and update
the tests.
Differential Revision: http://reviews.llvm.org/D12938
llvm-svn: 248154
Krzysztof Parzyszek