This was reverted due to a "missing" file, but in reality
what happened was that I renamed a file, and then due to
a merge conflict both the old file and the new file got
added to the repository. This led to an unused cpp file
being in the repo and not referenced by any CMakeLists.txt
but #including a .h file that wasn't in the repo. In an
even more unfortunate coincidence, CMake didn't report the
unused cpp file because it was in a subdirectory of the
folder with the CMakeLists.txt, and not in the same directory
as any CMakeLists.txt.
The presence of the unused file was then breaking certain
tools that determine file lists by globbing rather than
by what's specified in CMakeLists.txt
In any case, the fix is to just remove the unused file from
the patch set.
llvm-svn: 302042
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
Currently several places assume the VAL member is always at least the same size as pVal. In particular for a memcpy in the move assignment operator. While this is a true assumption, it isn't good practice to assume this.
This patch gives the union a name so we can write the memcpy in terms of the union itself. This also adds a similar memcpy to the move constructor where we previously just copied using VAL directly.
This patch is mostly just a mechanical addition of the U in front of VAL and pVAL everywhere. But several constructors had to be modified since we can't directly initializer a field of named union from the initializer list.
Differential Revision: https://reviews.llvm.org/D30629
llvm-svn: 302040
Check to make sure no compile units have the same DW_AT_stmt_list values. Report a verification error if they do.
Differential Revision: https://reviews.llvm.org/D32771
llvm-svn: 302039
Allocframe and the following stores on the stack have a latency of 2 cycles
when not in the same packet. This happens because R29 is needed early by the
store instruction. Since one of such stores can be packetized along with
allocframe and use old value of R29, we can assign it 0 cycle latency
while leaving latency of other stores to the default value of 2 cycles.
Patch by Jyotsna Verma.
llvm-svn: 302034
The packetizer needs to convert .cur instruction to its regular form if
the use is not in the same packet as the .cur. The code in the packetizer
handles one type of .cur, which is the vector load case. This patch
updates the packetizer so that it can undo all the .cur instructions.
In the test case, the .cur is the 128B version, but there are also the
post-increment versions.
Patch by Brendon Cahoon.
llvm-svn: 302032
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
Summary:
When apps or other libraries link against a library with symbol
versions, the version string is recorded in the import table, and used
at runtime to resolve the symbol back to a library that provides that
version (vaguely like how two-level namespaces work in Mach-O). ld's
--default-symver flag tags every exported symbol with a symbol version
string equal to the library's soname. Using --default-symver means
multiple versions of libLLVM can coexist within the same process, at
least to the extent that they don't try to pass data between each
other's llvms.
As an example, imagine a language like Rust using llvm for CPU codegen,
binding to OpenGL, with Mesa as the OpenGL implementation using llvm for
R600 codegen. With --default-symver Rust and Mesa will resolve their
llvm usage to the version each was linked against, which need not match.
(Other ELF platforms like BSD and Solaris might have similar semantics,
I've not checked.)
This is based on an autoconf version of this patch by Adam Jackson.
This new option can be used to add --default-symver to the linker flags
for libLLVM.so.
Reviewers: beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D30997
llvm-svn: 302026
It is needed to check that the number of operands are 2 when
finding the case of a logic combination, e.g. 'and' of two compares.
Review: Ulrich Weigand
llvm-svn: 302022
Fixes PR31789 - When loop-vectorize tries to use these intrinsics for a
non-default address space pointer we fail with a "Calling a function with a
bad singature!" assertion. This patch solves this by adding the 'vector of
pointers' argument as an overloaded type which will determine the address
space.
Differential revision: https://reviews.llvm.org/D31490
llvm-svn: 302018
Summary:
Currently, loop deletion deletes loop where the only values
that are used outside the loop are loop-invariant.
This patch adds logic to delete loops where the loop is proven to be
never executed (i.e. the only predecessor of the loop preheader has a
constant conditional branch as terminator, and the preheader is not the
taken target). This will remove loops that become dead after
loop-unswitching generates constant conditional branches.
The next steps are:
1. moving the loop deletion implementation to LoopUtils.
2. Add logic in loop-simplifyCFG which will support changing conditional
constant branches to unconditional branches. If loops become unreachable in this
process, they can be removed using `deleteDeadLoop` function.
Reviewers: chandlerc, efriedma, sanjoy, reames
Reviewed by: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32494
llvm-svn: 302015
The "macosx" OS type is still the canonical type. In the future "macos" will
become the canonical OS type (but we will still support "macosx").
rdar://27043820
Differential Revision: https://reviews.llvm.org/D32748
llvm-svn: 302011
The patch is failing to add StringTableStreamBuilder.h, but that isn't
even discovered because the corresponding StringTableStreamBuilder.cpp
isn't added to any CMakeLists.txt file and thus never built. I think
this patch is just incomplete.
llvm-svn: 302002
This was reported by the ASAN bot, and it turned out to be
a fairly fundamental problem with the design of VarStreamArray
and the way it passes context information to the extractor.
The fix was cumbersome, and I'm not entirely pleased with it,
so I plan to revisit this design in the future when I'm not
pressed to get the bots green again. For now, this fixes
the issue by storing the context information by value instead
of by reference, and introduces some impossibly-confusing
template magic to make things "work".
llvm-svn: 301999
We should always expect values to be named before running the module summary
analysis (see NameAnonGlobals pass), so it's fine if we crash in that case.
llvm-svn: 301991
Summary:
This is the corresponding llvm change to D28037 to ensure no performance
regression.
Reviewers: bogner, kbarton, hfinkel, iteratee, echristo
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28329
llvm-svn: 301990
Previously we had knowledge of how to serialize and deserialize
a string table inside of DebugInfo/PDB, but the string table
that it serializes contains a piece that is actually considered
CodeView and can appear outside of a PDB. We already have logic
in llvm-readobj and MCCodeView to read and write this format,
so it doesn't make sense to duplicate the logic in DebugInfoPDB
as well.
This patch makes codeview::StringTable (for writing) and
codeview::StringTableRef (for reading), updates DebugInfoPDB
to use these classes for its own writing, and updates llvm-readobj
to additionally use StringTableRef for reading.
It's a bit more difficult to get MCCodeView to use this for
writing, but it's a logical next step.
llvm-svn: 301986
This patch verifies the .debug_line:
- verify all addresses in a line table sequence have ascending addresses
- verify that all line table file indexes are valid
Unit tests added for both cases.
Differential Revision: https://reviews.llvm.org/D32765
llvm-svn: 301984
When we replaced the multiplicand the destination node might already exist.
When that happens the original gets CSEd and deleted. However, it's actually
used as the offset so nonsense is produced.
Should fix PR32726.
llvm-svn: 301983
Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301980
The directory and file tables now have form-based content descriptors.
Parse these and extract the per-directory/file records based on the
descriptors. For now we support only DW_FORM_string (inline) for the
path names; follow-up work will add support for indirect forms (i.e.,
DW_FORM_strp, strx<N>, and line_strp).
Differential Revision: http://reviews.llvm.org/D32713
llvm-svn: 301978
Turns out this wasn't NFC-ish at all because there's a bug processing shuffles
that change the size of their input vectors (that case always seems to trip us
up).
This should fix PR32872 while we investigate how it failed and reduce a testcase:
https://bugs.llvm.org/show_bug.cgi?id=32872
llvm-svn: 301977
LTO and other fancy linking previously led to DWARF that contained invalid references. We already validate that CU relative references fall into the CU, and the DW_FORM_ref_addr references fall inside the .debug_info section, but we didn't validate that the references pointed to correct DIE offsets. This new verification will ensure that all references refer to actual DIEs and not an offset in between.
This caught a bug in DWARFUnit::getDIEForOffset() where if you gave it any offset, it would match the DIE that mathes the offset _or_ the next DIE. This has been fixed.
Differential Revision: https://reviews.llvm.org/D32722
llvm-svn: 301971
I doubt anyone actually uses it, and I'm not even entirely convinced it exists
myself; but it is our default for "clang -arch armv6". Functionally, if it does
exist it's identical to the arm1176jz-f from LLVM's point of view (the
difference is apparently in the "Security Extensions").
llvm-svn: 301962
On AMDGPU if an SGPR is spilled to a VGPR, the frame index
is deleted. If there were any CSR SGPRs, this woudl
assert when setting the offset.
llvm-svn: 301961
The compiler was generating code that ends up ignoring a multiple
latency dependence between two instructions by scheduling the
intructions in back-to-back packets.
The packetizer needs to end a packet if the latency of the current
current insruction and the source in the previous packet is
greater than 1 cycle. This case occurs when there is still room in
the current packet, but scheduling the instruction causes a stall.
Instead, the packetizer should start a new packet. Also, if the
current packet already contains a stall, then it is okay to add
another instruction to the packet that also causes a stall. This
occurs when there are no instructions that can be scheduled in
between the producer and consumer instructions.
This patch changes the latency for loads to 2 cycles from 3 cycles.
This change refects that a load only needs to be separated by
one extra packet to eliminate the stall.
Patch by Ikhlas Ajbar.
llvm-svn: 301954
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
Instead of defining a custom iterator class, just use a function with a
callback, which is much easier to understand and less error prone.
Differential Revision: https://reviews.llvm.org/D32470
llvm-svn: 301942
If all jobs complete successfully, use pool.close() instead of
pool.terminate() before waiting for the workers. Zach Turner reported
that he was getting "access denied" exceptions from pool.terminate().
Make the workers abort immediately without printing to stderr when they
are interrupted.
Finally, catch exceptions when attempting to remove our temporary
testing directory. On abnormal exit, there can often be open handles
that haven't been cleaned up yet.
llvm-svn: 301941
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301939
Previously we wrote line information and file checksum
information, but we did not write information about inlinee
lines and functions. This patch adds support for that.
llvm-svn: 301936
This was originally checked in here:
https://reviews.llvm.org/rL301923
And reverted here:
https://reviews.llvm.org/rL301924
Because there's a clang test that would fail after this. I fixed/removed the
offending CHECK lines in:
https://reviews.llvm.org/rL301928
So let's try this again. Original commit message:
This is the fold that causes the infinite loop in BoringSSL
(https://github.com/google/boringssl/blob/master/crypto/cipher/e_rc2.c)
when we fix instcombine demanded bits to prefer 'not' ops as in https://reviews.llvm.org/D32255.
There are 2 or 3 problems with dyn_castNotVal, and I don't think we can
reinstate https://reviews.llvm.org/D32255 until dyn_castNotVal is completely eliminated.
1. As shown here, it transforms 'not' into random xor. This transform is harmful to SCEV and codegen because 'not' can often be folded while random xor cannot.
2. It does not transform vector constants. This is actually a good thing, but if you don't believe the above argument, then we shouldn't have excluded vectors.
3. It tries to avoid transforming not(not(X)). That's nice, but it doesn't match the greedy nature of instcombine. If we DeMorganize a pattern that has an extra 'not' in it: ~(~(~X) & Y) --> (~X | ~Y)
That's just another case of DeMorgan, so we should trust that we'll fold that pattern too: (~X | ~ Y) --> ~(X & Y)
Differential Revision: https://reviews.llvm.org/D32665
llvm-svn: 301929
This is the fold that causes the infinite loop in BoringSSL
(https://github.com/google/boringssl/blob/master/crypto/cipher/e_rc2.c)
when we fix instcombine demanded bits to prefer 'not' ops as in D32255.
There are 2 or 3 problems with dyn_castNotVal, and I don't think we can
reinstate D32255 until dyn_castNotVal is completely eliminated.
1. As shown here, it transforms 'not' into random xor. This transform is
harmful to SCEV and codegen because 'not' can often be folded while
random xor cannot.
2. It does not transform vector constants. This is actually a good thing,
but if you don't believe the above argument, then we shouldn't have
excluded vectors.
3. It tries to avoid transforming not(not(X)). That's nice, but it doesn't
match the greedy nature of instcombine. If we DeMorganize a pattern
that has an extra 'not' in it:
~(~(~X) & Y) --> (~X | ~Y)
That's just another case of DeMorgan, so we should trust that we'll fold
that pattern too:
(~X | ~ Y) --> ~(X & Y)
Differential Revision: https://reviews.llvm.org/D32665
llvm-svn: 301923
Summary: This is a common pattern that arise when legalizing large integers operations. Only do it when Y + 1 cannot overflow as this would change the carry behavior of uaddo .
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32687
llvm-svn: 301922
This is motivated by https://reviews.llvm.org/D32488 where I am trying
to add printing of the section type for incompatible sections to LLD
error messages. This patch allows us to use the same code in
llvm-readobj and LLD instead of duplicating the function inside LLD.
Patch by Alexander Richardson!
llvm-svn: 301921
Document the 'code' data type, and that value{15-17} is different to
value{17-15}.
Patch by @chenwj (Wei-Ren Chen).
Differential Revision: https://reviews.llvm.org/D32117
llvm-svn: 301920
Summary: Common pattern when legalizing large integers operations. Similar to D32687, when the carry isn't used.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Differential Revision: https://reviews.llvm.org/D32738
llvm-svn: 301919
PR31088 demonstrated that we were assuming that only integers require promotion from <1 x iX> types, when in fact float types may require it as well - in this case half floats.
This patch adds support for extension/truncation for both integer and float types.
Differential Revision: https://reviews.llvm.org/D32391
llvm-svn: 301910
The existing code only looks at half of the tree when matching bswap + rol patterns ending in an OR tree (as opposed to a cascade).
Patch originally introduced by Jim Lewis.
Submitted on the behalf of Dinar Temirbulatov.
Differential Revision: https://reviews.llvm.org/D32039
llvm-svn: 301907
Emit and use the TableGen instruction selector for ARM. At the moment,
this allows us to remove the hand-written code for selecting G_SDIV and
G_UDIV.
Future commits will focus on increasing the code coverage for it and
removing more dead code from the current instruction selector.
llvm-svn: 301905
Fixes PR30730.
This is a re-commit of a pulled commit. The commit was pulled because some
software projects contained uses of Altivec vectors that violated alignment
requirements. Known issues have now been fixed.
Committing on behalf of Lei Huang.
Differential Revision: https://reviews.llvm.org/D26861
llvm-svn: 301892
r288279 mistakenly added it to all arches, but it's only available
from v8.1 onwards.
The testcase is awkward, because (I suspect) of PR32873.
Spotted by inspection.
llvm-svn: 301890
Because it was a callee-saved register, we automatically generated code
to spill and unspill its original value so that it is restored after the
function returns.
The problem is that this code was being generated before the epilogue.
The epilogue itself uses the Y register, which could be prematurely
restored by the CSR restoration process.
This removes R29R28 from the CSR list and changes the prologue/epilogue
code to handle it explicitly.
llvm-svn: 301887
This change caused buildbot failures, apparently because we're not
passing around types that InstSimplify is used to seeing. I'm not overly
familiar with InstSimplify, so I'm reverting this until I can figure out
what exactly is wrong.
llvm-svn: 301885
In particular (since it wouldn't fit nicely in the summary):
(select (icmp eq V 0) P (getelementptr P V)) -> (getelementptr P V)
Differential Revision: https://reviews.llvm.org/D31435
llvm-svn: 301880
This tracks whether MaxCallFrameSize is computed yet. Ideally we would
assert and fail when the value is queried before it is computed, however
this fails various targets that need to be fixed first.
Differential Revision: https://reviews.llvm.org/D32570
llvm-svn: 301851
Zachary Turner