Follow up rL290858 by removing the MIPS specific version of XRayTable
emission in favour of the basic version.
This resolves a buildbot failure where the ELF sections were malformed
causing the linker to reject the object files with xray related sections.
Reviewers: dberris, slthakur
Differential Revision: https://reviews.llvm.org/D32808
llvm-svn: 302138
This fixes a regression since SVN rev 273808 (which was supposed to
not change functionality).
The regression caused miscompilations (noted in the wild when targeting
AArch64) on platforms with 32 bit long.
Differential Revision: https://reviews.llvm.org/D32850
llvm-svn: 302137
In this patch, I introduce a new altmacro string delimiter.
This review is the second review in a series of four reviews.
(one for each altmacro feature: LOCAL, string delimiter, string '!' escape sign and absolute expression as a string '%' ).
In the alternate macro mode, you can delimit strings with matching angle brackets <..>
when using it as a part of calling macro arguments.
As described in the https://sourceware.org/binutils/docs-2.27/as/Altmacro.html
"<string>
You can delimit strings with matching angle brackets."
assumptions:
1. If an argument begins with '<' and ends with '>'. The argument is considered as a string.
2. Except adding new string mark '<..>', a regular macro behavior is expected.
3. The altmacro cannot affect the regular less/greater behavior.
4. If a comma is present inside an angle brackets it considered as a character and not as a separator.
Differential Revision: https://reviews.llvm.org/D32701
llvm-svn: 302135
Added the integer data processing intrinsics from ACLE v2.1 Chapter 9
but I have missed out the saturation_occurred intrinsics for now. For
the instructions that read and write the GE bits, a chain is included
and the only instruction that reads these flags (sel) is only
selectable via the implemented intrinsic.
Differential Revision: https://reviews.llvm.org/D32281
llvm-svn: 302126
According to psABI, PLT stub clobbers XMM8-XMM15.
In Regcall calling convention those registers are used for passing parameters.
Thus we need to prevent lazy binding in Regcall.
Differential Revision: https://reviews.llvm.org/D32430
llvm-svn: 302124
This makes it simpler for the runtime to consistently handle the entries
in the function sled index in both 32 and 64 bit platforms where the
XRay runtime works.
Follow-up on D32693.
llvm-svn: 302111
Summary:
This change adds a new section to the xray-instrumented binary that
stores an index into ranges of the instrumentation map, where sleds
associated with the same function can be accessed as an array. At
runtime, we can get access to this index by function ID offset allowing
for selective patching and unpatching by function ID.
Each entry in this new section (xray_fn_idx) will include two pointers
indicating the start and one past the end of the sleds associated with
the same function. These entries will be 16 bytes long on x86 and
aarch64. On arm, we align to 16 bytes anyway so the runtime has to take
that into consideration.
__{start,stop}_xray_fn_idx will be the symbols that the runtime will
look for when we implement the selective patching/unpatching by function
id APIs. Because XRay synthesizes the function id's in a monotonically
increasing manner at runtime now, implementations (and users) can use
this table to look up the sleds associated with a specific function.
This is useful in implementations that want to do things like:
- Implement coverage mode for functions by patching everything
pre-main, then as functions are encountered, the installed handler
can unpatch the function that's been encountered after recording
that it's been called.
- Do "learning mode", so that the implementation can figure out some
statistical information about function calls by function id for a
time being, and then determine which functions are worth
uninstrumenting at runtime.
- Do "selective instrumentation" where an implementation can
specifically instrument only certain function id's at runtime
(either based on some external data, or through some other
heuristics) instead of patching all the instrumented functions at
runtime.
Reviewers: dblaikie, echristo, chandlerc, javed.absar
Subscribers: pelikan, aemerson, kpw, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D32693
llvm-svn: 302109
When profiling a no-op incremental link of Chromium I found that the functions
computeImportForFunction and computeDeadSymbols were consuming roughly 10% of
the profile. The goal of this change is to improve the performance of those
functions by changing the map lookups that they were previously doing into
pointer dereferences.
This is achieved by changing the ValueInfo data structure to be a pointer to
an element of the global value map owned by ModuleSummaryIndex, and changing
reference lists in the GlobalValueSummary to hold ValueInfos instead of GUIDs.
This means that a ValueInfo will take a client directly to the summary list
for a given GUID.
Differential Revision: https://reviews.llvm.org/D32471
llvm-svn: 302108
Summary:
This is an implementation of the loop detection logic that XRay needs to
determine whether a function might take time at runtime. Without this
heuristic, XRay will tend to not instrument short functions that have
loops that might have runtime dependent on inputs or external values.
While this implementation doesn't do any further analysis than just
figuring out whether there is a loop in the MachineFunction being
code-gen'ed, we're paving the way for being able to perform more
sophisticated analysis of the function in the future (for example to
determine whether the trip count for the loop might be constant, and
make a decision on that instead). This enables us to cover more
functions with the default heuristics, and potentially identify ones
that have variable runtime latency just by looking for the presence of
loops.
Reviewers: chandlerc, rnk, pelikan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32274
llvm-svn: 302103
Summary:
The existing implementation creates a symbolic SCEV expression every
time we analyze a phi node and then has to remove it, when the analysis
is finished. This is very expensive, and in most of the cases it's also
unnecessary. According to the data I collected, ~60-70% of analyzed phi
nodes (measured on SPEC) have the following form:
PN = phi(Start, OP(Self, Constant))
Handling such cases separately significantly speeds this up.
Reviewers: sanjoy, pete
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32663
llvm-svn: 302096
Change checkRippleForAdd from a heuristic to a full check -
if it is provable that the add does not overflow return true, otherwise false.
Patch by Yoav Ben-Shalom
Differential Revision: https://reviews.llvm.org/D32686
llvm-svn: 302093
This patch adds isConstant and getConstant for determining if KnownBits represents a constant value and to retrieve the value. Use them to simplify code.
Differential Revision: https://reviews.llvm.org/D32785
llvm-svn: 302091
I don't believe its possible to have non-zero values here since DataLayout became required. The APInt constructor inside of the KnownBits object will assert if this ever happens.
llvm-svn: 302089
This patch adds zext, sext, and trunc methods to KnownBits and uses them where possible.
Differential Revision: https://reviews.llvm.org/D32784
llvm-svn: 302088
This is the DAG equivalent of https://reviews.llvm.org/D32255 ,
which will hopefully be committed again. The functionality
(preferring a 'not' op) is already here in the DAG, so this is
just intended to be a clean-up and performance improvement.
llvm-svn: 302087
Compiler emitted synthetic types may not have an associated DIFile
(translation unit). In such a case, when generating CodeView debug type
information, we would attempt to compute an absolute filepath which
would result in a segfault due to a NULL DIFile*. If there is no source
file associated with the type, elide the type index entry for the type
and record the type information. This actually results in higher
fidelity debug information than clang/C2 as of this writing.
Resolves PR32668!
llvm-svn: 302085
Otherwise, each CPU has to manually specify the extensions it supports,
even though they have to be a superset of the base arch extensions.
And when there's redundant data there's stale data, so most of the CPUs
lie about the features they support (almost none lists AEK_FP).
Instead, do the saner thing: add the optional extensions on top of the
base extensions provided by the architecture.
The ARM TargetParser has the same behavior.
Differential Revision: https://reviews.llvm.org/D32780
llvm-svn: 302078
That's only a required extension as of v8.1a.
Remove it from the "generic" CPU as well: it should only support the
base ISA (and binutils agrees).
Also unify the MC tests into crc.s and arm64-crc32.s
llvm-svn: 302077
Summary:
It's not safe to assume that atexit handlers can be run once the app crashed.
Patch by Jochen Eisinger.
Reviewers: kcc, vitalybuka
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32640
llvm-svn: 302076
Adrian requested that we break things down to make things clean in the DWARFVerifier. This patch breaks everything down into nice individual functions and cleans up the code quite a bit and prepares us for the next round of verifiers.
Differential Revision: https://reviews.llvm.org/D32812
llvm-svn: 302062
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
llvm-svn: 302060
Summary:
Cloning basic blocks in the loop for runtime loop unroller depends on loop being
in rotated form (i.e. loop latch target is the exit block).
Assert that this is true, so that callers of runtime loop unroller pass in
canonical loops.
The single caller of this function has that check recently added:
https://reviews.llvm.org/rL301239
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32801
llvm-svn: 302058
. there should be no runtime relocation inside the bpf function.
. relocation supported here mostly for debugging.
. a test case is added.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 302055
The raw CodeView format references strings by "offsets", but it's
confusing what table the offset refers to. In the case of line
number information, it's an offset into a buffer of records,
and an indirection is required to get another offset into a
different table to find the final string. And in the case of
checksum information, there is no indirection, and the offset
refers directly to the location of the string in another buffer.
This would be less confusing if we always just referred to the
strings by their value, and have the library be smart enough
to correctly resolve the offsets on its own from the right
location.
This patch makes that possible. When either reading or writing,
all the user deals with are strings, and the library does the
appropriate translations behind the scenes.
llvm-svn: 302053
llvm-readobj hand rolls some CodeView parsing code for string
tables, so this patch updates it to re-use some of the newly
introduced parsing code in LLVMDebugInfoCodeView.
Differential Revision: https://reviews.llvm.org/D32772
llvm-svn: 302052
I was worried we might replace a mul with a mul+shift even if there were later
uses. Turns out to be unfounded but I'd just as well add an actual test for it.
llvm-svn: 302051
Summary: Do the transform when the carry isn't used. It's a pattern exposed when legalizing large integers.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32755
llvm-svn: 302047
Adrian requested we create a DWARFVerifier.cpp file to contain all of the DWARF verification stuff. This change simply moves the functionality over into DWARFVerifier.h and DWARFVerifier.cpp, renames the DWARFVerifier methods to start with lower case, and switches DWARFContext.cpp over to using the new functionality.
Differential Revision: https://reviews.llvm.org/D32809
llvm-svn: 302044
Simon Dardis