This also rolls in the changes discussed in http://reviews.llvm.org/D6766.
Defers migrating the debug info for new allocas until after all partitions
are created.
Thanks to Chandler for reviewing!
llvm-svn: 225272
Too many different comment characters - instead of trying to account for
them all, instead disable the comments and just check for end-of-line
instead.
llvm-svn: 225020
GCC does this for non-zero discriminators and since GCC doesn't produce
column info, that was the only place it comes up there. For LLVM, since
we can emit discriminators and/or column info, it makes more sense to
invert the condition and just test for changes in line number.
This should resolve at least some of the GDB 7.5 test suite failures
created by recent Clang changes that increase the location fidelity
(which, since Clang defaults to including column info on Linux by
default created a bunch of cases that confused GDB).
In theory we could do this better/differently by grouping actual source
statements together in a similar manner to the way lexical scopes are
handled but given that GDB isn't really in a position to consume that (&
users are probably somewhat used to different lines being different
'statements') this seems the safest and cheapest change. (I'm concerned
that doing this 'right' would bloat the debugloc data even further -
something Duncan's working hard to address)
llvm-svn: 225011
Correct the line information generation for preprocessed assembly. Although we
tracked the source information for the macro instantiation, we failed to account
for the fact that we were instantiating a macro, which is populated into a new
buffer and that the line information would be relative to the definition rather
than the actual instantiation location. This could cause the line number
associated with the statement to be very high due to wrapping of the difference
calculated for the preprocessor line information emitted into the stream.
Properly calculate the line for the macro instantiation, referencing the line
where the macro is actually used as GCC/gas do.
The test case uses x86, though the same problem exists on any other target using
the LLVM IAS.
llvm-svn: 224810
fragmented variables.
This caused codegen to start crashing when we built somewhat large
programs with debug info and optimizations. 'check-msan' hit in, and
I suspect a bootstrap would as well. I mailed a test case to the
review thread.
llvm-svn: 224750
Followup to r224294:
ARM/AArch64: Attach the FrameSetup MIFlag to CFI instructions.
Debug info marks the first instruction without the FrameSetup flag
as being the end of the function prologue. Any CFI instructions in the
middle of the function prologue would cause debug info to end the prologue
too early and worse, attach the line number of the CFI instruction, which
incidentally is often 0.
llvm-svn: 224743
This allows us to generate debug info for extremely advanced code such as
typedef struct { long int a; int b;} S;
int foo(S s) {
return s.b;
}
which at -O1 on x86_64 is codegen'd into
define i32 @foo(i64 %s.coerce0, i32 %s.coerce1) #0 {
ret i32 %s.coerce1, !dbg !24
}
with this patch we emit the following debug info for this
TAG_formal_parameter [3]
AT_location( 0x00000000
0x0000000000000000 - 0x0000000000000006: rdi, piece 0x00000008, rsi, piece 0x00000004
0x0000000000000006 - 0x0000000000000008: rdi, piece 0x00000008, rax, piece 0x00000004 )
AT_name( "s" )
AT_decl_file( "/Volumes/Data/llvm/_build.ninja.release/test.c" )
Thanks to chandlerc, dblaikie, and echristo for their feedback on all
previous iterations of this patch!
llvm-svn: 224739
Debug info marks the first instruction without the FrameSetup flag
as being the end of the function prologue. Any CFI instructions in the
middle of the function prologue would cause debug info to end the prologue
too early and worse, attach the line number of the CFI instruction, which
incidentally is often 0.
llvm-svn: 224294
Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.
- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.
- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.
So, assembly like this:
define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}
turns into this:
define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}
I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.
This is part of PR21532.
llvm-svn: 224257
DW_OP_const <const> doesn't describe a constant value, but a value at a constant address.
The proper way to describe a constant value is DW_OP_constu <const>, DW_OP_stack_value.
Added DW_OP_stack_value to the stack.
Marked incorrect-variable-debugloc1.ll to xfail for PowerPC64, while the the failure (PR21881)
is being investigated.
llvm-svn: 224098
The test is failing for llvm-ppc64 because for this platform the location list is not being generated at all (most likely because of the bug in PPC code optimization or generation). I will file a bug agains PPC compiler, but meanwhile, until PPC bug is fixed, I will have to revert my change.
llvm-svn: 224000
DW_OP_const <const> doesn't describe a constant value, but a value at a constant address.
The proper way to describe a constant value is DW_OP_constu <const>, DW_OP_stack_value.
Added DW_OP_stack_value to the stack.
-This line, and those below, will be ignored--
M lib/CodeGen/AsmPrinter/DwarfDebug.cpp
A test/DebugInfo/incorrect-variable-debugloc1.ll
llvm-svn: 223981
replaceDbgDeclareForAlloca() replaces an alloca by a value storing the
address of what was the alloca. If there is a dbg.declare corresponding
to that alloca, we need to lower it to a dbg.value describing the additional
dereference operation to be performed to get to the underlying variable.
This is done by adding a DW_OP_deref to the complex location part of the
location description. This deref was added to the end of the operation list,
which is wrong. The expression applies to what is described by the
dbg.{declare,value}, and as we are changing this, we need to apply the
DW_OP_deref as the first operation in the list.
Part of the fix for rdar://19162268.
llvm-svn: 223799
Usually global variables are in a retain list and instanciated before
any call to constructImportedEntityDIE is made. This isn't true for
forward declarations though.
The testcase for this change is generated by a clang patched to emit
such forward declarations (patch at http://reviews.llvm.org/D6173
which will land soon). The updated testcase tests more than just
global variables, it now tests every type of 'using' clause we
support.
llvm-svn: 222217
use DIScopeRef.
A paired commit at clang will follow to show cases where we will use an
identifer for the context of a global variable.
rdar://18958417
llvm-svn: 222195
ELF targets (and maybe COFF) use relocations when referring
to strings in the .debug_str section. Handle that in the
accelerator table dumper. This commit restores the
test/DebugInfo/cross-cu-inlining.ll test to its expected
platform independant form, validating that the fix works
(this test failed on linux boxes).
llvm-svn: 222029
If this workaround gets the bots green, then we have to find out
why the -dwarf-accel-tables=Enable option doesn't work as
expected on non-darwin platforms.
llvm-svn: 222007
This reverts commit r221842 which was a revert of r221836 and of the
test parts of r221837.
This new version fixes an UB bug pointed out by David (along with
addressing some other review comments), makes some dumping more
resilient to broken input data and forces the accelerator tables
to be dumped in the tests where we use them (this decision is
platform specific otherwise).
llvm-svn: 222003
This reverts commit r221836.
The tests are asserting on some buildbots. This also reverts the
test part of r221837 as it relies on dwarfdump dumping the
accelerator tables.
llvm-svn: 221842
The DIE offset in the accel tables is an offset relative to the start
of the debug_info section, but we were encoding the offset to the
start of the containing CU.
llvm-svn: 221837
Clang -gsplit-dwarf self-host -O0, binary increases by 0.0005%, -O2,
binary increases by 25%.
A large binary inside Google, split-dwarf, -O0, and other internal flags
(GDB index, etc) increases by 1.8%, optimized build is 35%.
The size impact may be somewhat greater in .o files (I haven't measured
that much - since the linked executable -O0 numbers seemed low enough)
due to relocations. These relocations could be removed if we taught the
llvm-symbolizer to handle indexed addressing in the .o file (GDB can't
cope with this just yet, but GDB won't be reading this info anyway).
Also debug_ranges could be shared between .o and .dwo, though ideally
debug_ranges would get a schema that could used index(+offset)
addressing, and move to the .dwo file, then we'd be back to sharing
addresses in the address pool again.
But for now, these sizes seem small enough to go ahead with this.
Verified that no other DW_TAGs are produced into the .o file other than
subprograms and inlined_subroutines.
llvm-svn: 221306
This is experimental, just barely enough to get things to not
immediately combust.
A note for those who are curious:
Only lld can successfully link the object files, other linkers truncate
the section names making the debug sections illegible to debuggers.
Even with this in mind, we believe we are having trouble with SECREL
relocations.
llvm-svn: 221245
When LLVM emits DWARF call frame information, it currently creates a local,
section-relative symbol in the code section, which is pointed to by a
relocation on the .eh_frame section. However, for C++ we emit some functions in
section groups, and the SysV ABI has some rules to make it easier to remove
these sections
(http://www.sco.com/developers/gabi/latest/ch4.sheader.html#section_group_rules):
A symbol table entry with STB_LOCAL binding that is defined relative to one
of a group's sections, and that is contained in a symbol table section that is
not part of the group, must be discarded if the group members are discarded.
References to this symbol table entry from outside the group are not allowed.
This means that we need to use the function symbol for the relocation, not a
temporary symbol.
There was a comment in the code claiming that the local symbol was used to
avoid creating a relocation, but a relocation must be created anyway as the
code and CFI are in different sections.
llvm-svn: 221150
This was a compile-unit specific label (unused in type units) and seems
unnecessary anyway when we can more easily directly compute the size of
the compile unit.
llvm-svn: 221067
Adrian Prantl