Summary:
For the most part this consists of replacing ${LLVM_TARGETS_TO_BUILD} with
some combination of AllTargets* so that they depend on specific components
of a target backend rather than all of it. The overall effect of this is
that, for example, tools like opt no longer falsely depend on the
disassembler, while tools like llvm-ar no longer depend on the code
generator.
There's a couple quirks to point out here:
* AllTargetsCodeGens is a bit more prevalent than expected. Tools like dsymutil
seem to need it which I was surprised by.
* llvm-xray linked to all the backends but doesn't seem to need any of them.
It builds and passes the tests so that seems to be correct.
* I left gold out as it's not built when binutils is not available so I'm
unable to test it
Reviewers: bogner, JDevlieghere
Reviewed By: bogner
Subscribers: mehdi_amini, mgorny, steven_wu, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62331
llvm-svn: 361567
Rename member 'Size' to 'AllocatedSize' in order to provide a hint that the
allocated size may be different than the requested size. Comments are added to
clarify this point. Updated the InMemoryBuffer in FileOutputBuffer.cpp to track
the requested buffer size.
Patch by Machiel van Hooren. Thanks Machiel!
https://reviews.llvm.org/D61599
llvm-svn: 361195
Also updates RuntimeDyldChecker and llvm-rtdyld to support zero-fill tests by
returning a content address of zero (but no error) for zero-fill atoms, and
treating loads from zero as returning zero.
llvm-svn: 360547
The --args option can now be used to pass arguments to code linked with
llvm-rtdyld. E.g.
$ llvm-rtdyld file1.o file2.o --args a b c
is equivalent to:
$ ld -o program file1.o file2.o
$ ./program a b c
This is the rtdyld counterpart to the jitlink change in r359115, and makes
benchmarking and comparison between the tools easier.
llvm-svn: 359168
This patch reduces the number of functions in the interface between RuntimeDyld
and RuntimeDyldChecker by combining "GetXAddress" and "GetXContent" functions
into "GetXInfo" functions that return a struct describing both the address and
content. The GetStubOffset function is also replaced with a pair of utilities,
GetStubInfo and GetGOTInfo, that fit the new scheme. For RuntimeDyld both of
these functions will return the same result, but for the new JITLink linker
(https://reviews.llvm.org/D58704) these will provide the addresses of PLT stubs
and GOT entries respectively.
For JITLink's use, a 'got_addr' utility has been added to the rtdyld-check
language, and the syntax of 'got_addr' and 'stub_addr' has been changed: both
functions now take two arguments, a 'stub container name' and a target symbol
name. For llvm-rtdyld/RuntimeDyld the stub container name is the object file
name and section name, separated by a slash. E.g.:
rtdyld-check: *{8}(stub_addr(foo.o/__text, y)) = y
For the upcoming llvm-jitlink utility, which creates stubs on a per-file basis
rather than a per-section basis, the container name is just the file name. E.g.:
jitlink-check: *{8}(got_addr(foo.o, y)) = y
llvm-svn: 358295
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
llvm-svn: 346604
Non-loaded sections (whose unused load-address defaults to zero) should not
be taken into account when calculating ImageBase, or ImageBase will be
incorrectly set to 0.
Patch by Andrew Scheidecker. Thanks Andrew!
https://reviews.llvm.org/D51343
+ // The Sections list may contain sections that weren't loaded for
+ // whatever reason: they may be debug sections, and ProcessAllSections
+ // is false, or they may be sections that contain 0 bytes. If the
+ // section isn't loaded, the load address will be 0, and it should not
+ // be included in the ImageBase calculation.
llvm-svn: 344995
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Removes AllocateRWX, setWritable and setExecutable from sys::Memory and
standardizes on allocateMappedMemory / protectMappedMemory. The
allocateMappedMemory method is updated to request full permissions for memory
blocks so that they can be marked executable later.
llvm-svn: 318464
This changes DwarfContext to delegate to DwarfObject instead of having
pure virtual methods.
With this DwarfContextInMemory is replaced with an implementation of
DwarfObject that is local to a .cpp file.
llvm-svn: 308543
frames.
RuntimeDyld was previously responsible for tracking allocated EH frames, but it
makes more sense to have the RuntimeDyld::MemoryManager track them (since the
frames are allocated through the memory manager, and written to memory owned by
the memory manager). This patch moves the frame tracking into
RTDyldMemoryManager, and changes the deregisterFrames method on
RuntimeDyld::MemoryManager from:
void deregisterEHFrames(uint8_t *Addr, uint64_t LoadAddr, size_t Size);
to:
void deregisterEHFrames();
Separating this responsibility will allow ORC to continue to throw the
RuntimeDyld instances away post-link (saving a few dozen bytes per lazy
function) while properly deregistering frames when modules are unloaded.
This patch also updates ORC to call deregisterEHFrames when modules are
unloaded. This fixes a bug where an exception that tears down the JIT can then
unwind through dangling EH frames that have been deallocated but not
deregistered, resulting in UB.
For people using SectionMemoryManager this should be pretty much a no-op. For
people with custom allocators that override registerEHFrames/deregisterEHFrames,
you will now be responsible for tracking allocated EH frames.
Reviewed in https://reviews.llvm.org/D32829
llvm-svn: 302589
Currently llvm-rtdyld in -check mode will map sections to back-to-back 4k
aligned slabs starting at 0x1000. Automatically remapping sections by default is
helpful because it quickly exposes relocation bugs due to use of local addresses
rather than load addresses (these would silently pass if the load address was
not remapped). These mappings can be explicitly overridden on a per-section
basis using llvm-rtdlyd's -map-section option. This patch extends this scheme to
also preserve any mappings made by RuntimeDyld itself. Preserving RuntimeDyld's
automatic mappings allows us to write test cases to verify that these automatic
mappings have been applied.
This will allow the fix in https://reviews.llvm.org/D32899 to be tested with
llvm-rtdyld -check.
llvm-svn: 302372
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
This patch replaces RuntimeDyld::SymbolInfo with JITSymbol: A symbol class
that is capable of lazy materialization (i.e. the symbol definition needn't be
emitted until the address is requested). This can be used to support common
and weak symbols in the JIT (though this is not implemented in this patch).
For consistency, RuntimeDyld::SymbolResolver is renamed to JITSymbolResolver.
For space efficiency a new class, JITEvaluatedSymbol, is introduced that
behaves like the old RuntimeDyld::SymbolInfo - i.e. it is just a pair of an
address and symbol flags. Instances of JITEvaluatedSymbol can be used in
symbol-tables to avoid paying the space cost of the materializer.
llvm-svn: 277386
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
llvm-svn: 273701
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Summary:
For relocation types that are known to not require stub functions, there
is no need to allocate extra space for the stub functions.
Reviewers: lhames, reames, maksfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14676
llvm-svn: 253920
Now that setExecutable() changed to do all the ground work to make
memory executable on the host, we can remove all (redundant) calls
to invalidate instruction cache here.
As an added bonus, this makes invalidateInstructionCache() dead
code, so it can be removed.
Differential Revision: http://reviews.llvm.org/D13631
llvm-svn: 253343
This commit introduces an option, --preallocate, so that we can get memory
upfront and use it in small memory model tests (in order to get
reliable results).
Differential Revision: http://reviews.llvm.org/D13630
llvm-svn: 250956
TrivialMemoryManager currently doesn't check the return type of AllocateRWX --
and returns a 'null' MemoryBlock to its caller. As pointed out by Lang,
this exposes some serious issues with the MemoryManager interface. There's,
in fact, no way to report back an error to clients rather than aborting in
case memory can't be allocated. Eventually the interface will grow to support
this, but for now, fail sooner rather than later.
Differential Revision: http://reviews.llvm.org/D13627
llvm-svn: 250350
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Daniel Sanders