By analogy with the NVGPU dialect, introduce an AMDGPU dialect for
AMD-specific intrinsic wrappers.
The dialect initially includes wrappers around the raw buffer intrinsics.
On AMD GPUs, a memref can be converted to a "buffer descriptor" that
allows more precise control of memory access, such as by allowing for
out of bounds loads/stores to be replaced by 0/ignored without adding
additional conditional logic, which is important for performance.
The repository currently contains a limited conversion from
transfer_read/transfer_write to Mubuf intrinsics, which are an older,
deprecated intrinsic for the same functionality.
The new amdgpu.raw_buffer_* ops allow these operations to be used
explicitly and for including metadata such as whether the target
chipset is an RDNA chip or not (which impacts the interpretation of
some bits in the buffer descriptor), while still maintaining an
MLIR-like interface.
(This change also exposes the floating-point atomic add intrinsic.)
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D122765
The names of the functions that are supposed to be exported do not match the implementations. This is due in part to cac7aabbd8.
This change makes the implementations and declarations match and adds a couple missing declarations.
The new names follow the pattern of the existing `verify` functions where the prefix is maintained as `_mlir_ciface_` but the suffix follows the new naming convention.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D124891
This dialect provides operations that can be used to control transformation of
the IR using a different portion of the IR. It refers to the IR being
transformed as payload IR, and to the IR guiding the transformation as
transform IR.
The main use case for this dialect is orchestrating fine-grain transformations
on individual operations or sets thereof. For example, it may involve finding
loop-like operations with specific properties (e.g., large size) in the payload
IR, applying loop tiling to those and only those operations, and then applying
loop unrolling to the inner loops produced by the previous transformations. As
such, it is not intended as a replacement for the pass infrastructure, nor for
the pattern rewriting infrastructure. In the most common case, the transform IR
will be processed and applied to payload IR by a pass. Transformations
expressed by the transform dialect may be implemented using the pattern
infrastructure or any other relevant MLIR component.
This dialect is designed to be extensible, that is, clients of this dialect are
allowed to inject additional operations into this dialect using the newly
introduced in this patch `TransformDialectExtension` mechanism. This allows the
dialect to avoid a dependency on the implementation of the transformation as
well as to avoid introducing dialect-specific transform dialects.
See https://discourse.llvm.org/t/rfc-interfaces-and-dialects-for-precise-ir-transformation-control/60927.
Reviewed By: nicolasvasilache, Mogball, rriddle
Differential Revision: https://reviews.llvm.org/D123135
This commit moves FuncOp out of the builtin dialect, and into the Func
dialect. This move has been planned in some capacity from the moment
we made FuncOp an operation (years ago). This commit handles the
functional aspects of the move, but various aspects are left untouched
to ease migration: func::FuncOp is re-exported into mlir to reduce
the actual API churn, the assembly format still accepts the unqualified
`func`. These temporary measures will remain for a little while to
simplify migration before being removed.
Differential Revision: https://reviews.llvm.org/D121266
The revision removes the linalg.fill operation and renames the OpDSL generated linalg.fill_tensor operation to replace it. After the change, all named structured operations are defined via OpDSL and there are no handwritten operations left.
A side-effect of the change is that the pretty printed form changes from:
```
%1 = linalg.fill(%cst, %0) : f32, tensor<?x?xf32> -> tensor<?x?xf32>
```
changes to
```
%1 = linalg.fill ins(%cst : f32) outs(%0 : tensor<?x?xf32>) -> tensor<?x?xf32>
```
Additionally, the builder signature now takes input and output value ranges as it is the case for all other OpDSL operations:
```
rewriter.create<linalg::FillOp>(loc, val, output)
```
changes to
```
rewriter.create<linalg::FillOp>(loc, ValueRange{val}, ValueRange{output})
```
All other changes remain minimal. In particular, the canonicalization patterns are the same and the `value()`, `output()`, and `result()` methods are now implemented by the FillOpInterface.
Depends On D120726
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D120728
These passes generally don't rely on any special aspects of FuncOp, and moving allows
for these passes to be used in many more situations. The passes that obviously weren't
relying on invariants guaranteed by a "function" were updated to be generic pass, the
rest were updated to be FunctionOpinterface InterfacePasses.
The test updates are NFC switching from implicit nesting (-pass -pass2) form to
the -pass-pipeline form (generic passes do not implicitly nest as op-specific passes do).
Differential Revision: https://reviews.llvm.org/D121190
The current StandardToLLVM conversion patterns only really handle
the Func dialect. The pass itself adds patterns for Arithmetic/CFToLLVM, but
those should be/will be split out in a followup. This commit focuses solely
on being an NFC rename.
Aside from the directory change, the pattern and pass creation API have been renamed:
* populateStdToLLVMFuncOpConversionPattern -> populateFuncToLLVMFuncOpConversionPattern
* populateStdToLLVMConversionPatterns -> populateFuncToLLVMConversionPatterns
* createLowerToLLVMPass -> createConvertFuncToLLVMPass
Differential Revision: https://reviews.llvm.org/D120778
The last remaining operations in the standard dialect all revolve around
FuncOp/function related constructs. This patch simply handles the initial
renaming (which by itself is already huge), but there are a large number
of cleanups unlocked/necessary afterwards:
* Removing a bunch of unnecessary dependencies on Func
* Cleaning up the From/ToStandard conversion passes
* Preparing for the move of FuncOp to the Func dialect
See the discussion at https://discourse.llvm.org/t/standard-dialect-the-final-chapter/6061
Differential Revision: https://reviews.llvm.org/D120624
This fixes bug49264.
Simply, coroutine shouldn't be inlined before CoroSplit. And the marker
for pre-splited coroutine is created in CoroEarly pass, which ran after
AlwaysInliner Pass in O0 pipeline. So that the AlwaysInliner couldn't
detect it shouldn't inline a coroutine. So here is the error.
This patch set the presplit attribute in clang and mlir. So the inliner
would always detect the attribute before splitting.
Reviewed By: rjmccall, ezhulenev
Differential Revision: https://reviews.llvm.org/D115790
Flags some potential cases where splitting isn't happening and so could result
in confusing results. Also update some test files where there were near misses
in splitting that seemed unintentional.
Differential Revision: https://reviews.llvm.org/D109636
Precursor: https://reviews.llvm.org/D110200
Removed redundant ops from the standard dialect that were moved to the
`arith` or `math` dialects.
Renamed all instances of operations in the codebase and in tests.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D110797
Historically the builtin dialect has had an empty namespace. This has unfortunately created a very awkward situation, where many utilities either have to special case the empty namespace, or just don't work at all right now. This revision adds a namespace to the builtin dialect, and starts to cleanup some of the utilities to no longer handle empty namespaces. For now, the assembly form of builtin operations does not require the `builtin.` prefix. (This should likely be re-evaluated though)
Differential Revision: https://reviews.llvm.org/D105149
This is the very first step toward removing the glue and clutter from linalg and
replace it with proper sparse tensor types. This revision migrates the LinalgSparseOps
into SparseTensorOps of a sparse tensor dialect. This also provides a new home for
sparse tensor related transformation.
NOTE: the actual replacement with sparse tensor types (and removal of linalg glue/clutter)
will follow but I am trying to keep the amount of changes per revision manageable.
Differential Revision: https://reviews.llvm.org/D101573
This is the very first step toward removing the glue and clutter from linalg and
replace it with proper sparse tensor types. This revision migrates the LinalgSparseOps
into SparseTensorOps of a sparse tensor dialect. This also provides a new home for
sparse tensor related transformation.
NOTE: the actual replacement with sparse tensor types (and removal of linalg glue/clutter)
will follow but I am trying to keep the amount of changes per revision manageable.
Reviewed By: bixia
Differential Revision: https://reviews.llvm.org/D101488
ArmSVE dialect is behind the recent changes in how the Vector dialect
interacts with backend vector dialects and the MLIR -> LLVM IR
translation module. This patch cleans up ArmSVE initialization within
Vector and removes the need for an LLVMArmSVE dialect.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D100171
We will soon be adding non-AVX512 operations to MLIR, such as AVX's rsqrt. In https://reviews.llvm.org/D99818 several possibilities were discussed, namely to (1) add non-AVX512 ops to the AVX512 dialect, (2) add more dialects (e.g. AVX dialect for AVX rsqrt), and (3) expand the scope of the AVX512 to include these SIMD x86 ops, thereby renaming the dialect to something more accurate such as X86Vector.
Consensus was reached on option (3), which this patch implements.
Reviewed By: aartbik, ftynse, nicolasvasilache
Differential Revision: https://reviews.llvm.org/D100119
The Intel Advanced Matrix Extensions (AMX) provides a tile matrix
multiply unit (TMUL), a tile control register (TILECFG), and eight
tile registers TMM0 through TMM7 (TILEDATA). This new MLIR dialect
provides a bridge between MLIR concepts like vectors and memrefs
and the lower level LLVM IR details of AMX.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D98470
Data layout information allows to answer questions about the size and alignment
properties of a type. It enables, among others, the generation of various
linear memory addressing schemes for containers of abstract types and deeper
reasoning about vectors. This introduces the subsystem for modeling data
layouts in MLIR.
The data layout subsystem is designed to scale to MLIR's open type and
operation system. At the top level, it consists of attribute interfaces that
can be implemented by concrete data layout specifications; type interfaces that
should be implemented by types subject to data layout; operation interfaces
that must be implemented by operations that can serve as data layout scopes
(e.g., modules); and dialect interfaces for data layout properties unrelated to
specific types. Built-in types are handled specially to decrease the overall
query cost.
A concrete default implementation of these interfaces is provided in the new
Target dialect. Defaults for built-in types that match the current behavior are
also provided.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D97067
The dialect separation was introduced to demarkate ops operating in different
type systems. This is no longer the case after the LLVM dialect has migrated to
using built-in vector types, so the original reason for separation is no longer
valid. Squash the two dialects into one.
The code size decrease isn't quite large: the ops originally in LLVM_AVX512 are
preserved because they match LLVM IR intrinsics specialized for vector element
bitwidth. However, it is still conceptually beneficial to have only one
dialect. I originally considered to use Tablegen multiclasses to define both
the type-polymorphic op and its two intrinsic-related instantiations, but
decided against it given both the complexity of the required Tablegen input and
its dissimilarity with the rest of ODS-defined ops, both potentially resulting
in very poor maintainability.
Depends On D98327
Reviewed By: nicolasvasilache, springerm
Differential Revision: https://reviews.llvm.org/D98328
The two dialects are largely redundant. The former was introduced as a mirror
of the latter operating on LLVM dialect types. This is no longer necessary
since the LLVM dialect operates on built-in types. Combine the two dialects.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D98060
This commit introduced a cyclic dependency:
Memref dialect depends on Standard because it used ConstantIndexOp.
Std depends on the MemRef dialect in its EDSC/Intrinsics.h
Working on a fix.
This reverts commit 8aa6c3765b.
Create the memref dialect and move several dialect-specific ops without
dependencies to other ops from std dialect to this dialect.
Moved ops:
AllocOp -> MemRef_AllocOp
AllocaOp -> MemRef_AllocaOp
DeallocOp -> MemRef_DeallocOp
MemRefCastOp -> MemRef_CastOp
GetGlobalMemRefOp -> MemRef_GetGlobalOp
GlobalMemRefOp -> MemRef_GlobalOp
PrefetchOp -> MemRef_PrefetchOp
ReshapeOp -> MemRef_ReshapeOp
StoreOp -> MemRef_StoreOp
TransposeOp -> MemRef_TransposeOp
ViewOp -> MemRef_ViewOp
The roadmap to split the memref dialect from std is discussed here:
https://llvm.discourse.group/t/rfc-split-the-memref-dialect-from-std/2667
Differential Revision: https://reviews.llvm.org/D96425
mlir-opt supports many more test cases. All available dialects supported by latest mlir-opt should be coverted in the test case.
Reviewed By: aartbik, stephenneuendorffer, mehdi_amini
Differential Revision: https://reviews.llvm.org/D93821
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
registry.insert<mlir::standalone::StandaloneDialect>();
registry.insert<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
registry.insert<mlir::standalone::StandaloneDialect>();
registry.insert<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
mlir::registerDialect<mlir::standalone::StandaloneDialect>();
mlir::registerDialect<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
This changes the behavior of constructing MLIRContext to no longer load globally registered dialects on construction. Instead Dialects are only loaded explicitly on demand:
- the Parser is lazily loading Dialects in the context as it encounters them during parsing. This is the only purpose for registering dialects and not load them in the context.
- Passes are expected to declare the dialects they will create entity from (Operations, Attributes, or Types), and the PassManager is loading Dialects into the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only need to load the dialect for the IR it will emit, and the optimizer is self-contained and load the required Dialects. For example in the Toy tutorial, the compiler only needs to load the Toy dialect in the Context, all the others (linalg, affine, std, LLVM, ...) are automatically loaded depending on the optimization pipeline enabled.
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally registered dialects on construction. Instead Dialects are only loaded explicitly on demand:
- the Parser is lazily loading Dialects in the context as it encounters them during parsing. This is the only purpose for registering dialects and not load them in the context.
- Passes are expected to declare the dialects they will create entity from (Operations, Attributes, or Types), and the PassManager is loading Dialects into the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only need to load the dialect for the IR it will emit, and the optimizer is self-contained and load the required Dialects. For example in the Toy tutorial, the compiler only needs to load the Toy dialect in the Context, all the others (linalg, affine, std, LLVM, ...) are automatically loaded depending on the optimization pipeline enabled.
All ops of the SCF dialect now use the `scf.` prefix instead of `loop.`. This
is a part of dialect renaming.
Differential Revision: https://reviews.llvm.org/D79844
Invoke `keep()` on the output file of `mlir-opt` in case the invocation of `MlirOptMain` was successful, to make sure the output file is not deleted on exit from `mlir-opt`.
Fixes a similar problem in `standalone-opt` from the example for an out-of-tree, standalone MLIR dialect.
This revision also adds a missing parameter to the invocation of `MlirOptMain` in `standalone-opt`.
Differential Revision: https://reviews.llvm.org/D77643
Summary:
* Removal of FxpMathOps was discussed on the mailing list.
* Will send a courtesy note about also removing the Quantizer (which had some dependencies on FxpMathOps).
* These were only ever used for experimental purposes and we know how to get them back from history as needed.
* There is a new proposal for more generalized quantization tooling, so moving these older experiments out of the way helps clean things up.
Subscribers: mgorny, mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, liufengdb, Joonsoo, grosul1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77479
Display the list of dialects known to mlir-opt. This is useful
for ensuring that linkage has happened correctly, for instance.
Differential Revision: https://reviews.llvm.org/D74865
Chuanqi Xu