We shifted the MachineBasicBlocks to the end of the MachineFunction in
DFS order. This will not ensure that MachineBasicBlocks which fell
through to one another will remain contiguous. Instead, implement
a stable sort algorithm for iplist.
This partially reverts commit r214150.
llvm-svn: 247978
Extend mask value to 64 bits before taking its complement and assert when mask is
too large to apply in the small case (previously the extra words were silently ignored).
http://reviews.llvm.org/D11890
Patch by James Touton!
llvm-svn: 247972
- Strenghten the logic to be sure we hoist the restore point out of the current
loop. (The fixes a bug with infinite loop, added as part of the patch.)
- Walk over the exit blocks of the current loop to conver to the desired restore
point in one iteration of the update loop.
llvm-svn: 247958
Since aliases actually use and verify their explicit type already, no
further invalid testing is required here. The
invalid.test:ALIAS-TYPE-MISMATCH case catches errors due to emitting a
non-pointee type in the new format or a non-pointer type in the old
format.
llvm-svn: 247952
Windows EH funclets need to be contiguous. The FuncletLayout pass will
ensure that the funclets are together and begin with a funclet entry MBB.
Differential Revision: http://reviews.llvm.org/D12943
llvm-svn: 247937
This makes catchret look more like a branch, and less like a weird use
of BlockAddress. It also lets us get away from
llvm.x86.seh.restoreframe, which relies on the old parentfpoffset label
arithmetic.
llvm-svn: 247936
The SSE4A instructions EXTRQ/INSERTQ only use the lower 64-bits (or less) for many of their input vector operands and all of them have undefined upper 64-bits results.
Differential Revision: http://reviews.llvm.org/D12680
llvm-svn: 247934
This reverts commit r247898 (which reverted r247894).
Patch fixed to address two issues exposed by buildbots:
- unused variable warning in NDEBUG mode
- std::initializer_list lifetime issue causing test failures
Original Summary:
Support for including the function bitcode indices in the Value Symbol
Table. This requires writing the VST after the function blocks, which in
turn requires a new VST forward declaration record encoding the offset of
the full VST (which is backpatched to contain the offset after the VST
is written).
This patch also enables the lazy function reader to use the new function
indices out of the VST. This support will be used by ThinLTO as well, which
will be in a follow on patch. Backwards compatibility with older bitcode
files is maintained.
A new test is also included.
The bitcode format (used for the lazy reader as well as the upcoming
ThinLTO patches) came out of discussions with Duncan and others and is
described here:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12536
llvm-svn: 247927
This test uses a gcov file generated in a little-endian host. The gcov
reader does not allow different endianness, so the test fails on big
endian hosts.
XFAILing for now.
llvm-svn: 247920
getLandingPadSuccessor assumes that each invoke can have at most one EH
pad successor, but WinEH invokes can have more than one. Two out of
three callers of getLandingPadSuccessor don't use the returned
landingpad, so we can make them use this simple predicate instead.
Eventually we'll have to circle back and fix SplitKit.cpp so that
register allocation works. Baby steps.
llvm-svn: 247904
Temporarily revert to fix some buildbot issues. One is a minor issue
with a variable unused in NDEBUG mode. More concerning are some test
failures on win7 that I need to dig into.
This reverts commit 4e66a74543459832cfd571db42b4543580ae1d1d.
llvm-svn: 247898
Summary:
This assembler directive is used in O32 PIC to restore the current function's $gp after executing JAL's. The $gp is first stored on the stack at a user-specified offset.
It has the following format: ".cprestore 8" (where 8 is the offset).
This fixes llvm.org/PR20967.
Patch by Toma Tabacu.
Reviewers: seanbruno, tomatabacu
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D6267
llvm-svn: 247897
Summary:
Support for including the function bitcode indices in the Value Symbol
Table. This requires writing the VST after the function blocks, which in
turn requires a new VST forward declaration record encoding the offset of
the full VST (which is backpatched to contain the offset after the VST
is written).
This patch also enables the lazy function reader to use the new function
indices out of the VST. This support will be used by ThinLTO as well, which
will be in a follow on patch. Backwards compatibility with older bitcode
files is maintained.
A new test is also included.
The bitcode format (used for the lazy reader as well as the upcoming
ThinLTO patches) came out of discussions with Duncan and others and is
described here:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12536
llvm-svn: 247894
AVX-512 does not provide an instruction that shuffles mask register. So I do the following way:
mask-2-simd , shuffle simd , simd-2-mask
Differential Revision: http://reviews.llvm.org/D12727
llvm-svn: 247876
This adds enough machinery to support reading simple GCC AutoFDO
profiles. It now supports reading flat profiles (no function calls).
Subsequent patches will add support for:
- Inlined calls (in particular, the inline call stack is not traversed
to accumulate samples).
- Working sets and modules. These are used mostly for GCC's LIPO
optimizations, so they're not needed in LLVM atm. I'm not sure that
we will ever need them. For now, I've if0'd around the calls.
The patch also adds support in GCOV.h for gcov version V704 (generated
by GCC's profile conversion tool).
llvm-svn: 247874
Summary:
For loop destroyed current instance before invoking next.
Temporary variable added to prevent use-after-dtor when invoke
destructor on current instance.
Reviewers: eugenis
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D12912
Rename temp var.
llvm-svn: 247867
The MSVC doesn't really support exception specifications so let's just
turn these into cleanuppads. Later, we might use terminatepad to more
efficiently encode the "noexcept"-ness of a function body.
llvm-svn: 247848
from outside the BitstreamWriter.
Split out of patch D12536 (Function bitcode index in Value Symbol Table
and lazy reading support), which will use it to patch in the VST offset.
llvm-svn: 247847
Summary:
`signum(x)` is sometimes implemented as `(x >> 63) | (-x >>> 63)` (for
an `i64` `x`). This change adds a matcher for that pattern, and an
instcombine rule to optimize `signum(x) s< 1`.
Later, we can also consider optimizing:
icmp slt signum(x), 0 --> icmp slt x, 0
icmp sle signum(x), 1 --> true
etc.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12703
llvm-svn: 247846
Clang now passes the adjectives as an argument to catchpad.
Getting the CatchObj working is simply a matter of threading another
static alloca through codegen, first as an alloca, then as a frame
index, and finally as a frame offset.
llvm-svn: 247844
We are experimenting with a new approach to saving and restoring SSA
values used across funclets: let the register allocator do the dirty
work for us.
However, this means that we need to be able to clone commoned blocks
without relying on demotion.
llvm-svn: 247835
Split the preparation machinery into several functions, we will want to
selectively enable/disable different parts of it for an alternative
mechanism for dealing with cross-funclet uses.
llvm-svn: 247834
Otherwise we'd try to emit the thunk that passes the LSDA to
__CxxFrameHandler3. We don't emit the LSDA if there were no landingpads,
so we'd end up with an assembler error when trying to write the COFF
object.
llvm-svn: 247820
This pass implements a simple algorithm for conversion from CFG to
wasm's structured control flow. It doesn't yet handle multiple-entry
loops; that will be added in a future patch.
It also adds initial support for switch statements.
Differential Revision: http://reviews.llvm.org/D12735
llvm-svn: 247818
After D10403, we had FMF in the DAG but disabled by default. Nick reported no crashing errors after some stress testing,
so I enabled them at r243687. However, Escha soon notified us of a bug not covered by any in-tree regression tests:
if we don't propagate the flags, we may fail to CSE DAG nodes because differing FMF causes them to not match. There is
one test case in this patch to prove that point.
This patch hopes to fix or leave a 'TODO' for all of the in-tree places where we create nodes that are FMF-capable. I
did this by putting an assert in SelectionDAG.getNode() to find any FMF-capable node that was being created without FMF
( D11807 ). I then ran all regression tests and test-suite and confirmed that everything passes.
This patch exposes remaining work to get DAG FMF to be fully functional: (1) add the flags to non-binary nodes such as
FCMP, FMA and FNEG; (2) add the flags to intrinsics; (3) use the flags as conditions for transforms rather than the
current global settings.
Differential Revision: http://reviews.llvm.org/D12095
llvm-svn: 247815
This patch adds support for msan on aarch64-linux for both 39 and
42-bit VMA. The support is enabled by defining the
SANITIZER_AARCH64_VMA compiler flag to either 39 or 42 at build time
for both clang/llvm and compiler-rt. The default VMA is 39 bits.
llvm-svn: 247807
Summary:
Only the disassembler is supported in this patch but it has already found a few
issues in the Mips disassembler (mostly invalid instructions being successfully
disassembled).
Reviewers: kcc
Subscribers: russell.gallop, silvas, kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D12723
llvm-svn: 247786
When trying emit a stack adjustments using pops, frame lowering selects an
arbitrary free GPR. It should always select one from an appropriate class...
This fixes PR24649.
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D12609
llvm-svn: 247785
This is the mirror image of r242395.
When X86FrameLowering::emitEpilogue() looks for where to insert the %esp addition that
deallocates stack space used for local allocations, it assumes that any sequence of pop
instructions from function exit backwards consists purely of restoring callee-save registers.
This may be false, since from some point backward, the pops may be clean-up of stack space
allocated for arguments to a call.
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D12688
llvm-svn: 247784
When building LLVM as a (potentially dynamic) library that can be linked against
by multiple compilers, the default triple is not really meaningful.
We allow to explicitely set it to an empty string when configuring LLVM.
In this case, said "target independent" tests in the test suite that are using
the default triple are disabled by matching the newly available feature
"default_triple".
Reviewers: probinson, echristo
Differential Revision: http://reviews.llvm.org/D12660
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 247775
We only checked that a global is initialized with constants, which is
incorrect. We should be checking that GlobalVariable *is* a constant,
not just initialized with it.
llvm-svn: 247769
While packaging 3.7 for Fedora, the debug info splitting
process fell over this, so fix it upstream seems like a good plan.
This should be put in the 3.7 branch as well.
Noticed by Dave Airlie <airlied@redhat.com>
llvm-svn: 247757
In `IndVarSimplify::ExpandSCEVIfNeeded`,
`SCEVExpander::findExistingExpansion` may return an `llvm::Value` that
differs in type from the SCEV it was asked to find an expansion for (but
computes the same value). In such cases, we fall back on
`expandCodeFor`; and rely on LLVM to CSE the two equivalent
expressions (different only by a no-op cast) into a single computation.
I tried a few other approaches to fixing PR24783, all of which turned
out to be more complex than this current version:
1. Move the `ExpandSCEVIfNeeded` logic into `expandCodeFor`. This got
problematic because currently we do not pass in the `Loop *` into
`expandCodeFor`. Changing the interface to do this is a more
invasive change, and really does not make much semantic sense unless
the SCEV being passed in is an add recurrence.
There is also the problem of `expandCodeFor` being used in places
other than `indvars` -- there may be performance / correctness
issues elsewhere if `expandCodeFor` is moved from always generating
IR from scratch to cache-like model.
2. Have `findExistingExpansion` only return expression with the correct
type. This would make `isHighCostExpansionHelper` and thus
`isHighCostExpansion` more conservative than necessary.
3. Insert casts on the value returned by `findExistingExpansion` if
needed using `InsertNoopCastOfTo`. This is complicated because
`InsertNoopCastOfTo` depends on internal state of its
`SCEVExpander` (specifically `Builder.GetInserPoint()`), and this
may not be set up when `ExpandSCEVIfNeeded` is called.
4. Manually insert casts on the value returned by
`findExistingExpansion` if needed using `InsertNoopCastOfTo` via
`CastInst::Create`. This is probably workable, but figuring out the
location where the cast instruction needs to be inserted has enough
edge cases (arguments, constants, invokes, LCSSA must be preserved)
makes me feel what I have right now is simplest solution.
llvm-svn: 247749
We already fail with 'No such file or directory' when we try to open
the file -- if that doesn't exist. Also add a test to verify this behavior.
llvm-svn: 247744
These sections contain pointers to function that should be invoked
during startup/shutdown by __libc_csu_init and __libc_csu_fini.
Instrumenting these globals will append redzone to them, which will be
filled with zeroes. This will cause null pointer dereference at runtime.
Merge ASan regression tests for globals that should be ignored by
instrumentation pass.
llvm-svn: 247734
The verifier currently runs three times in LTO: (1) after parsing, (2)
at the beginning of the optimization pipeline, and (3) at the end of it.
The first run is important, since we're not sure where the bitcode comes
from and it's nice to validate it, but in release builds the extra runs
aren't appropriate.
This commit:
- Allows these runs to be disabled in LTOCodeGenerator.
- Adds command-line options to llvm-lto.
- Adds command-line options to libLTO.dylib, and disables the verifier
by default in release builds (based on NDEBUG).
This shaves about 3.5% off the runtime of ld64 when linking
verify-uselistorder with -flto -g.
rdar://22509081
llvm-svn: 247729
This may happen when the input program itself contains an infinite loop with no
exit block. In that case, we would fail to find a block post-dominating the loop
such that this block is outside of the loop.
This fixes PR24823.
Working on reducing the test case.
llvm-svn: 247710
The patch extends the optimization to cases where the constant's
magnitude is so small or large that the rounding of the conversion
is irrelevant. The "so small" case includes negative zero.
Differential review: http://reviews.llvm.org/D11210
llvm-svn: 247708
LazuValueInfo can prove that value is nonnull based on the context information.
Make use of this ability to infer nonnull attributes for the call arguments.
Differential Revision: http://reviews.llvm.org/D12836
llvm-svn: 247707
Under certain circumstances, tryBuildVectorShuffle would attempt to
create a BUILD_VECTOR node with an invalid combination of types.
This happened when one of the components of the original BUILD_VECTOR
was itself a TRUNCATE node. That TRUNCATE was stripped off during
intermediate processing to simplify code, but when adding the node
back to the result vector, we still need it to get the type right.
llvm-svn: 247694
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Daniel Sanders