When performing a !nonnull load from uninitialized memory, we
should preserve the nonnull assume just like in all other cases.
We already do this correctly in the generic mem2reg code, but
don't handle this case when using the optimized single-block
implementation.
Make sure that the optimized implementation exhibits the same
behavior as the generic implementation.
Alloca promotion can only deal with cases where the load/store
types match the alloca type (it explicitly does not support
bitcasted load/stores).
With opaque pointers this is no longer enforced through the pointer
type, so add an explicit check.
Use poison instead of undef for cases dealing with unreachable
code. This still leaves the more interesting case of "load from
uninitialized memory" as undef.
This is the first of two patches to address PR46753. We basically allow
mem2reg to promote allocas that are used in doppable instructions, for
now that means `llvm.assume`. The uses of the alloca (or a bitcast or
zero offset GEP from there) are replaced by `undef` in the droppable
instructions.
Reviewed By: Tyker
Differential Revision: https://reviews.llvm.org/D83976
SROA knows that it can look through addrspacecast but
PromoteMemoryToRegister did not handle them. This caused an assertion
error for the test case, exposed while running
`Transforms/PhaseOrdering/inlining-alignment-assumptions.ll` with D83978
applied.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D84085
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Summary:
When mem2reg inserts phi nodes in blocks with unreachable predecessors,
it adds undef operands for those incoming edges. When there are
multiple such predecessors, the order is currently based on the address
of the BasicBlocks. This change fixes that by using the BBNumbers in
the sort/search predicates, as is done elsewhere in mem2reg to ensure
determinism.
Also adds a testcase with a bunch of unreachable preds, which
(nodeterministically) fails without the fix.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55077
llvm-svn: 348024
Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
llvm-svn: 335580
This is r334704 (which was reverted in r334732) with a fix for
types like x86_fp80. We need to use getTypeAllocSizeInBits and
not getTypeStoreSizeInBits to avoid dropping debug info for
such types.
Original commit msg:
> Summary:
> Do not convert a DbgDeclare to DbgValue if the store
> instruction only refer to a fragment of the variable
> described by the DbgDeclare.
>
> Problem was seen when for example having an alloca for an
> array or struct, and there were stores to individual elements.
> In the past we inserted a DbgValue intrinsics for each store,
> just as if the store wrote the whole variable.
>
> When handling store instructions we insert a DbgValue that
> indicates that the variable is "undefined", as we do not know
> which part of the variable that is updated by the store.
>
> When ConvertDebugDeclareToDebugValue is used with a load/phi
> instruction we assert that the referenced value is large enough
> to cover the whole variable. Afaict this should be true for all
> scenarios where those methods are used on trunk. If the assert
> blows in the future I guess we could simply skip to insert a
> dbg.value instruction.
>
> In the future I think we should examine which part of the variable
> that is accessed, and add a DbgValue instrinsic with an appropriate
> DW_OP_LLVM_fragment expression.
>
> Reviewers: dblaikie, aprantl, rnk
>
> Reviewed By: aprantl
>
> Subscribers: JDevlieghere, llvm-commits
>
> Tags: #debug-info
>
> Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334830
Summary:
Do not convert a DbgDeclare to DbgValue if the store
instruction only refer to a fragment of the variable
described by the DbgDeclare.
Problem was seen when for example having an alloca for an
array or struct, and there were stores to individual elements.
In the past we inserted a DbgValue intrinsics for each store,
just as if the store wrote the whole variable.
When handling store instructions we insert a DbgValue that
indicates that the variable is "undefined", as we do not know
which part of the variable that is updated by the store.
When ConvertDebugDeclareToDebugValue is used with a load/phi
instruction we assert that the referenced value is large enough
to cover the whole variable. Afaict this should be true for all
scenarios where those methods are used on trunk. If the assert
blows in the future I guess we could simply skip to insert a
dbg.value instruction.
In the future I think we should examine which part of the variable
that is accessed, and add a DbgValue instrinsic with an appropriate
DW_OP_LLVM_fragment expression.
Reviewers: dblaikie, aprantl, rnk
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334704
We do the same thing in rewriteSingleStoreAlloca.
Fixes PR37632.
Reviewers: chandlerc, davide, efriedma
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D47825
llvm-svn: 334187
Currently debugify prints it's output to stdout,
with this patch all the output generated goes to stderr.
This change lets us use debugify without taking away
the ability to pipe the output to other llvm tools.
llvm-svn: 332642
This adds a -debugify-each mode to opt which, when enabled, wraps each
{Module,Function}Pass in a pipeline with logic to add, check, and strip
synthetic debug info for testing purposes.
This mode can be used to test complex pipelines for debug info bugs, or
to collect statistics about the number of debug values & locations lost
throughout various stages of a pipeline.
Patch by Son Tuan Vu!
Differential Revision: https://reviews.llvm.org/D46525
llvm-svn: 332312
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Track the debug locations of the incoming values to newly-created phis,
and apply merged debug locations to the phis.
A merged location will be on line 0, but will have the correct scope
set. This improves crash reporting when an inlined instruction with a
merged location triggers a machine exception. A debugger will be able to
narrow down the crash to the correct inlined scope, instead of simply
pointing to the outer scope of the caller.
Taken together with a change allows generating merged line-0 locations
for instructions which aren't calls, this results in a 0.5% increase in
the uncompressed size of the .debug_line section of a stage2+Release
build of clang (-O3 -g).
rdar://33858697
Differential Revision: https://reviews.llvm.org/D45397
llvm-svn: 330227
The Debugify pass synthesizes debug info for IR. It's paired with a
CheckDebugify pass which determines how much of the original debug info
is preserved. These passes make it easier to create targeted tests for
debug info preservation.
Here is the Debugify algorithm:
NextLine = 1
for (Instruction &I : M)
attach DebugLoc(NextLine++) to I
NextVar = 1
for (Instruction &I : M)
if (canAttachDebugValue(I))
attach dbg.value(NextVar++) to I
The CheckDebugify pass expects contiguous ranges of DILocations and
DILocalVariables. If it fails to find all of the expected debug info, it
prints a specific error to stderr which can be FileChecked.
This was discussed on llvm-dev in the thread:
"Passes to add/validate synthetic debug info"
Differential Revision: https://reviews.llvm.org/D40512
llvm-svn: 320202
The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
llvm-svn: 313905
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
llvm-svn: 313876
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
llvm-svn: 313825
Summary:
Most DIExpressions are empty or very simple. When they are complex, they
tend to be unique, so checking them inline is reasonable.
This also avoids the need for CodeGen passes to append to the
llvm.dbg.mir named md node.
See also PR22780, for making DIExpression not be an MDNode.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: qcolombet, javed.absar, eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37075
llvm-svn: 311594
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
Mem2Reg shouldn't be optimizing a function that is marked
optnone. There is a test checking this that fails when mem2reg is
explicitly added to the standard pass pipeline.
llvm-svn: 255336
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
I'm working on adding !dbg attachments to functions (PR23367), which
we'll use to determine the canonical subprogram for a function (instead
of the `subprograms:` array in the compile units). This updates a few
old tests in preparation.
Transforms/Mem2Reg/ConvertDebugInfo2.ll had an old-style grep+count
based test that would start to fail because I've added an extra line
with `!dbg`. Instead, explicitly `CHECK` for what I think the test
actually cares about.
All three testcases have subprograms with a valid `function:` reference
-- which means my upgrade script will add a `!dbg` attachment -- but
that aren't referenced from any compile unit. I suspect these testcases
were handreduced over-zealously (or have bitrotted?). Add a reference
from the compile unit so that upcoming Verifier checks won't fail here.
llvm-svn: 246351
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s.
The backend is liable to start relying on that (if it hasn't already),
so make uniquable `DICompileUnit`s illegal and automatically upgrade old
bitcode. This is a nice cleanup, since we can remove an unnecessary
`DenseSet` (and the associated uniquing info) from `LLVMContextImpl`.
Almost all the testcases were updated with this script:
git grep -e '= !DICompileUnit' -l -- test |
grep -v test/Bitcode |
xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,'
I imagine something similar should work for out-of-tree testcases.
llvm-svn: 243885
Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags,
using `DW_TAG_variable` in their place Stop exposing the `tag:` field at
all in the assembly format for `DILocalVariable`.
Most of the testcase updates were generated by the following sed script:
find test/ -name "*.ll" -o -name "*.mir" |
xargs grep -l 'DILocalVariable' |
xargs sed -i '' \
-e 's/tag: DW_TAG_arg_variable, //' \
-e 's/tag: DW_TAG_auto_variable, //'
There were only a handful of tests in `test/Assembly` that I needed to
update by hand.
(Note: a follow-up could change `DILocalVariable::DILocalVariable()` to
set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable`
(as appropriate), instead of having that logic magically in the backend
in `DbgVariable`. I've added a FIXME to that effect.)
llvm-svn: 243774
Add a verifier check that `DILocalVariable`s of tag
`DW_TAG_arg_variable` always have a non-zero 'arg:' field, and those of
tag `DW_TAG_auto_variable` always have a zero 'arg:' field. These are
the only configurations that are properly understood by the backend.
(Also, fix the bad examples in LangRef and test/Assembler, and fix the
bug in Kaleidoscope Ch8.)
A large number of testcases seem to have bitrotted their way forward
from some ancient version of the debug info hierarchy that didn't have
`arg:` parameters. If you have out-of-tree testcases that start failing
in the verifier and you don't care enough to get the `arg:` right, you
may have some luck just calling:
sed -e 's/, arg: 0/, arg: 1/'
or some such, but I hand-updated the ones in tree.
llvm-svn: 243183
Currently, a load from an alloca that is used in as single block and is not preceded
by a store is replaced by undef. This is not always correct if the single block is
inside a loop.
Fix the logic so that:
1) If there are no stores in the block, replace the load with an undef, as before.
2) If there is a store (regardless of where it is in the block w.r.t the load), bail
out, and let the rest of mem2reg handle this alloca.
Patch by: gil.rapaport@intel.com
Differential Revision: http://reviews.llvm.org/D11355
llvm-svn: 242884
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
llvm-svn: 239940
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Remove 'inlinedAt:' from MDLocalVariable. Besides saving some memory
(variables with it seem to be single largest `Metadata` contributer to
memory usage right now in -g -flto builds), this stops optimization and
backend passes from having to change local variables.
The 'inlinedAt:' field was used by the backend in two ways:
1. To tell the backend whether and into what a variable was inlined.
2. To create a unique id for each inlined variable.
Instead, rely on the 'inlinedAt:' field of the intrinsic's `!dbg`
attachment, and change the DWARF backend to use a typedef called
`InlinedVariable` which is `std::pair<MDLocalVariable*, MDLocation*>`.
This `DebugLoc` is already passed reliably through the backend (as
verified by r234021).
This commit removes the check from r234021, but I added a new check
(that will survive) in r235048, and changed the `DIBuilder` API in
r235041 to require a `!dbg` attachment whose 'scope:` is in the same
`MDSubprogram` as the variable's.
If this breaks your out-of-tree testcases, perhaps the script I used
(mdlocalvariable-drop-inlinedat.sh) will help; I'll attach it to PR22778
in a moment.
llvm-svn: 235050
Check that the `MDLocalVariable::getInlinedAt()` in a debug info
intrinsic's variable always matches the `MDLocation::getInlinedAt()` of
its `!dbg` attachment.
The goal here is to get rid of `MDLocalVariable::getInlinedAt()`
entirely (PR22778), since it's expensive and unnecessary, but I'll let
this verifier check bake for a while (a week maybe?) first. I've
updated the testcases that had the wrong value for `inlinedAt:`.
This checks that things are sane in the IR, but currently things go out
of whack in a few places in the backend. I'll follow shortly with
assertions in the backend (with code fixes).
If you have out-of-tree testcases that just started failing, here's how
I updated these ones:
1. The verifier check gives you the basic block, function, instruction,
and relevant metadata arguments (metadata numbering doesn't
necessarily match the source file, unfortunately).
2. Look at the `@llvm.dbg.*()` instruction, and compare the
`inlinedAt:` fields of the variable argument (second `metadata`
argument) and the `!dbg` attachment.
3. Figure out based on the variable `scope:` chain and the functions in
the file whether the variable has been inlined (and into what), so
you can determine which `inlinedAt:` is actually correct. In all of
the in-tree testcases, the `!MDLocation()` was correct and the
`!MDLocalVariable()` was wrong, but YMMV.
4. Duplicate the metadata that you're going to change, and add/drop the
`inlinedAt:` field from one of them. Be careful that the other
references to the same metadata node point at the correct one.
llvm-svn: 234021
Nikita Popov