Summary:
The llvm.invariant.start and llvm.invariant.end intrinsics currently
support specifying invariant memory objects only in the default address space.
With this change, these intrinsics are overloaded for any adddress space for memory objects
and we can use these llvm invariant intrinsics in non-default address spaces.
Example: llvm.invariant.start.p1i8(i64 4, i8 addrspace(1)* %ptr)
This overloaded intrinsic is needed for representing final or invariant memory in managed languages.
Reviewers: tstellarAMD, reames, apilipenko
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22519
llvm-svn: 276316
As reported on PR26235, we don't currently make use of the VBROADCASTF128/VBROADCASTI128 instructions (or the AVX512 equivalents) to load+splat a 128-bit vector to both lanes of a 256-bit vector.
This patch enables lowering from subvector insertion/concatenation patterns and auto-upgrades the llvm.x86.avx.vbroadcastf128.pd.256 / llvm.x86.avx.vbroadcastf128.ps.256 intrinsics to match.
We could possibly investigate using VBROADCASTF128/VBROADCASTI128 to load repeated constants as well (similar to how we already do for scalar broadcasts).
Differential Revision: https://reviews.llvm.org/D22460
llvm-svn: 276281
D20859 and D20860 attempted to replace the SSE (V)CVTTPS2DQ and VCVTTPD2DQ truncating conversions with generic IR instead.
It turns out that the behaviour of these intrinsics is different enough from generic IR that this will cause problems, INF/NAN/out of range values are guaranteed to result in a 0x80000000 value - which plays havoc with constant folding which converts them to either zero or UNDEF. This is also an issue with the scalar implementations (which were already generic IR and what I was trying to match).
This patch changes both scalar and packed versions back to using x86-specific builtins.
It also deals with the other scalar conversion cases that are runtime rounding mode dependent and can have similar issues with constant folding.
A companion clang patch is at D22105
Differential Revision: https://reviews.llvm.org/D22106
llvm-svn: 275981
Summary:
This is the first set of changes implementing the RFC from
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
This is a cross-sectional patch; rather than implementing the hotness
attribute for all optimization remarks and all passes in a patch set, it
implements it for the 'missed-optimization' remark for Loop
Distribution. My goal is to shake out the design issues before scaling
it up to other types and passes.
Hotness is computed as an integer as the multiplication of the block
frequency with the function entry count. It's only printed in opt
currently since clang prints the diagnostic fields directly. E.g.:
remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300)
A new API added is similar to emitOptimizationRemarkMissed. The
difference is that it additionally takes a code region that the
diagnostic corresponds to. From this, hotness is computed using BFI.
The new API is exposed via an analysis pass so that it can be made
dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.)
This feature can all be enabled by setDiagnosticHotnessRequested in the
LLVM context. If this is off, LazyBFI is not calculated (D22141) so
there should be no overhead.
A new command-line option is added to turn this on in opt.
My plan is to switch all user of emitOptimizationRemark* to use this
module instead.
Reviewers: hfinkel
Subscribers: rcox2, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21771
llvm-svn: 275583
This splits out the intrinsic table such that generic intrinsics come
first and target specific intrinsics are grouped by target. From here
we can find out which target an intrinsic is for or differentiate
between generic and target intrinsics.
The motivation here is to make it easier to move target specific
intrinsic handling out of generic code.
llvm-svn: 275575
The many levels of nesting inside the responsible code made it easy for
bugs to sneak in. Flattening the logic makes it easier to see what's
going on.
llvm-svn: 275244
Summary: http://reviews.llvm.org/D22118 uses metadata to store the call count, which makes it possible to have branch weight to have only one elements. Also fix the assertion failure in inliner when checking the instruction type to include "invoke" instruction.
Reviewers: mkuper, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22228
llvm-svn: 275079
Summary:
For sample-based PGO, using BFI to calculate callsite count is sometime not accurate. This is because with sampling based approach, if a callsite resides in a hot loop deeply nested in a bunch of cold branches, the callsite's BFI frequency would be inaccurately calculated due to lack of samples in the cold branch.
E.g.
if (A1 && A2 && A3 && ..... && A10) {
for (i=0; i < 100000000; i++) {
callsite();
}
}
Assume that A1 to A100 are all 100% taken, and callsite has 1000 samples and thus is considerred hot. Because the loop's trip count is huge, it's normal that all branches outside the loop has no sample at all. As a result, we can only use static branch probability to derive the the frequency of the loop header. Assuming that static heuristic thinks each branch is 50% taken, then the count calculated from BFI will be 1/(2^10) of the actual value.
In order to get more accurate callsite count, we directly annotate the weight on the call instruction, and directly use it when checking callsite hotness.
Note that this mechanism can also be shared by instrumentation based callsite hotness analysis. The side benefit is that it breaks the dependency from Inliner to BFI as call count is embedded in the IR.
Reviewers: davidxl, eraman, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22118
llvm-svn: 275073
Motivated by the work on the llvm.noalias intrinsic, teach BasicAA to look
through returned-argument functions when answering queries. This is essential
so that we don't loose all other AA information when supplementing with
llvm.noalias.
Differential Revision: http://reviews.llvm.org/D9383
llvm-svn: 275035
In order to make the optimizer smarter about using the 'returned' argument
attribute (generally, but motivated by my llvm.noalias intrinsic work), add a
utility function to Call/InvokeInst, and CallSite, to make it easy to get the
returned call argument (when one exists).
P.S. There is already an unfortunate amount of code duplication between
CallInst and InvokeInst, and this adds to it. We should probably clean that up
separately.
Differential Revision: http://reviews.llvm.org/D22204
llvm-svn: 275031
Summary:
This complements the earlier addition of IntrWriteMem and IntrWriteArgMem
LLVM intrinsic properties, see D18291.
Also start using the attribute for memset, memcpy, and memmove intrinsics,
and remove their special-casing in BasicAliasAnalysis.
Reviewers: reames, joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18714
llvm-svn: 274485
Summary:
This represents the adjustment applied to the implicit 'this' parameter
in the prologue of a virtual method in the MS C++ ABI. The adjustment is
always zero unless multiple inheritance is involved.
This increases the size of DISubprogram by 8 bytes, unfortunately. The
adjustment really is a signed 32-bit integer. If this size increase is
too much, we could probably win it back by splitting out a subclass with
info specific to virtual methods (virtuality, vindex, thisadjustment,
containingType).
Reviewers: aprantl, dexonsmith
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D21614
llvm-svn: 274325
CodeView need to know the offset of the storage allocation for a
bitfield. Encode this via the "extraData" field in DIDerivedType and
introduced a new flag, DIFlagBitField, to indicate whether or not a
member is a bitfield.
This fixes PR28162.
Differential Revision: http://reviews.llvm.org/D21782
llvm-svn: 274200
For the new hotness attribute, the API will take the pass rather than
the pass name so we can no longer play the trick of AlwaysPrint being a
special pass name. This adds a getter to help the transition.
There is also a corresponding clang patch.
llvm-svn: 274100
This is a resubmittion of 263158 change after fixing the existing problem with intrinsics mangling (see LTO and intrinsics mangling llvm-dev thread for details).
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 274043
This is a resubmittion of 263158 change after fixing the existing problem with intrinsics mangling (see LTO and intrinsics mangling llvm-dev thread for details).
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 273892
There are two separate issues:
- LLVM doesn't consider infinite loops to be side effects: we happily
hoist/sink above/below loops whose bounds are unknown.
- The absence of the noreturn attribute is insufficient for us to know
if a function will definitely return. Relying on noreturn in the
middle-end for any property is an accident waiting to happen.
llvm-svn: 273762
This intrinsic safely loads a function pointer from a virtual table pointer
using type metadata. This intrinsic is used to implement control flow integrity
in conjunction with virtual call optimization. The virtual call optimization
pass will optimize away llvm.type.checked.load intrinsics associated with
devirtualized calls, thereby removing the type check in cases where it is
not needed to enforce the control flow integrity constraint.
This patch also introduces the capability to copy type metadata between
global variables, and teaches the virtual call optimization pass to do so.
Differential Revision: http://reviews.llvm.org/D21121
llvm-svn: 273756
The bitset metadata currently used in LLVM has a few problems:
1. It has the wrong name. The name "bitset" refers to an implementation
detail of one use of the metadata (i.e. its original use case, CFI).
This makes it harder to understand, as the name makes no sense in the
context of virtual call optimization.
2. It is represented using a global named metadata node, rather than
being directly associated with a global. This makes it harder to
manipulate the metadata when rebuilding global variables, summarise it
as part of ThinLTO and drop unused metadata when associated globals are
dropped. For this reason, CFI does not currently work correctly when
both CFI and vcall opt are enabled, as vcall opt needs to rebuild vtable
globals, and fails to associate metadata with the rebuilt globals. As I
understand it, the same problem could also affect ASan, which rebuilds
globals with a red zone.
This patch solves both of those problems in the following way:
1. Rename the metadata to "type metadata". This new name reflects how
the metadata is currently being used (i.e. to represent type information
for CFI and vtable opt). The new name is reflected in the name for the
associated intrinsic (llvm.type.test) and pass (LowerTypeTests).
2. Attach metadata directly to the globals that it pertains to, rather
than using the "llvm.bitsets" global metadata node as we are doing now.
This is done using the newly introduced capability to attach
metadata to global variables (r271348 and r271358).
See also: http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21053
llvm-svn: 273729
This is a convenience iterator that allows clients to enumerate the
GlobalObjects within a Module.
Also start using it in a few places where it is obviously the right thing
to use.
Differential Revision: http://reviews.llvm.org/D21580
llvm-svn: 273470
Move Verifier::verifyIntrinsicType to Intrinsics::matchIntrinsicsType. Will be used to accumulate overloaded types of a given intrinsic by the upcoming patch to fix intrinsics names when overloaded types are renamed.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D19372
llvm-svn: 273424
This change is motivated by an upcoming change to the metadata representation
used for CFI. The indirect function call checker needs type information for
external function declarations in order to correctly generate jump table
entries for such declarations. We currently associate such type information
with declarations using a global metadata node, but I plan [1] to move all
such metadata to global object attachments.
In bitcode, metadata attachments for function declarations appear in the
global metadata block. This seems reasonable to me because I expect metadata
attachments on declarations to be uncommon. In the long term I'd also expect
this to be the case for CFI, because we'd want to use some specialized bitcode
format for this metadata that could be read as part of the ThinLTO thin-link
phase, which would mean that it would not appear in the global metadata block.
To solve the lazy loaded metadata issue I was seeing with D20147, I use the
same bitcode representation for metadata attachments for global variables as I
do for function declarations. Since there's a use case for metadata attachments
in the global metadata block, we might as well use that representation for
global variables as well, at least until we have a mechanism for lazy loading
global variables.
In the assembly format, the metadata attachments appear after the "declare"
keyword in order to avoid a parsing ambiguity.
[1] http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21052
llvm-svn: 273336
Summary:
This seems like the least intrusive way to pass this information
through.
Fixes PR28151
Reviewers: majnemer, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21444
llvm-svn: 273053
We convert `Default` to `NotPIC` so that target independent code
can reason about this correctly.
Differential Revision: http://reviews.llvm.org/D21394
llvm-svn: 273024
pass manager passes' `run` methods.
This removes a bunch of SFINAE goop from the pass manager and just
requires pass authors to accept `AnalysisManager<IRUnitT> &` as a dead
argument. This is a small price to pay for the simplicity of the system
as a whole, despite the noise that changing it causes at this stage.
This will also helpfull allow us to make the signature of the run
methods much more flexible for different kinds af passes to support
things like intelligently updating the pass's progression over IR units.
While this touches many, many, files, the changes are really boring.
Mostly made with the help of my trusty perl one liners.
Thanks to Sean and Hal for bouncing ideas for this with me in IRC.
llvm-svn: 272978
Summary: This reverts the changes to Globals.cpp and IRMover.cpp in
"[IR] Copy comdats in GlobalObject::copyAttributesFrom" (D20631,
rL270743).
The DeadArgElim test is left unchanged, and we change DAE to explicitly
copy comdats.
The reverted change breaks copyAttributesFrom when the destination lives
in a different module from the source. The decision in D21255 was to
revert this patch and handle comdat copying separately from
copyAttributesFrom.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21403
llvm-svn: 272855
Summary: As per title. This completes the C API Attribute support.
Reviewers: Wallbraker, whitequark, echristo, rafael, jyknight
Subscribers: mehdi_amini
Differential Revision: http://reviews.llvm.org/D21365
llvm-svn: 272811
Summary: The current naming not only doesn't convey the meaning of what this does, but worse, it convey the wrong meaning. This was a major source of confusion understanding the code, so I'm applying the boy scout rule here and making it better after I leave.
Reviewers: void, bkramer, whitequark
Differential Revision: http://reviews.llvm.org/D21264
llvm-svn: 272725
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
td_type is std::pair<std::string, std::string>, but the map returns
elements of std::pair<const std::string, std::string>. In well-designed
languages like C++ that yields an implicit copy perfectly hidden by
constref's lifetime extension. Just use auto, the typedef obscured the
real type anyways.
Found with a little help from clang-tidy's
performance-implicit-cast-in-loop.
llvm-svn: 272519
Summary: This also deprecated the get attribute function familly.
Reviewers: Wallbraker, whitequark, joker.eph, echristo, rafael, jyknight
Subscribers: axw, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19181
llvm-svn: 272504
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
llvm-svn: 272197
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
Arrange to call verify(Function &) on each function, followed by
verify(Module &), whether the verifier is being used from the pass or
from verifyModule(). As a side effect, this fixes an issue that caused
us not to call verify(Function &) on unmaterialized functions from
verifyModule().
Differential Revision: http://reviews.llvm.org/D21042
llvm-svn: 271956
Remove previously unreachable code that verifies that a function definition has
an entry block. By definition, a function definition has at least one block.
llvm-svn: 271948
This patch begins adding support for lowering to the XOP VPERMIL2PD/VPERMIL2PS shuffle instructions - adding the X86ISD::VPERMIL2 opcode and cleaning up the usage.
The internal llvm intrinsics were assuming the shuffle mask operand was the same type as the float/double input operands (I guess to simplify the intrinsic definitions in X86InstrXOP.td to a single value type). These needed changing to integer types (matching the clang builtin and the AMD intrinsics definitions), an auto upgrade path is added to convert old calls.
Mask decoding/target shuffle support will be added in future patches.
Differential Revision: http://reviews.llvm.org/D20049
llvm-svn: 271633
This patch removes the llvm intrinsics (V)CVTTPS2DQ and VCVTTPD2DQ truncation (round to zero) conversions and auto-upgrades to FP_TO_SINT calls instead.
Note: I looked at updating CVTTPD2DQ as well but this still requires a lot more work to correctly lower.
Differential Revision: http://reviews.llvm.org/D20860
llvm-svn: 271510
... and merge into `Value::getPointerDereferenceableBytes`. This was
suggested by Artur Pilipenko in D20764 -- since we no longer allow loads
of unsized types, there is no need anymore to have this special logic.
llvm-svn: 271455
Summary:
It isn't clear what is the operational meaning of loading or storing an
unsized types, since it cannot be lowered into something meaningful.
Since there does not seem to be any practical need for it either, make
such loads and stores illegal IR.
Reviewers: majnemer, chandlerc
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20846
llvm-svn: 271402
This will be necessary to allow the global merge pass to attach
multiple debug info metadata nodes to global variables once we reverse
the edge from DIGlobalVariable to GlobalVariable.
Differential Revision: http://reviews.llvm.org/D20414
llvm-svn: 271358
This patch adds an IR, assembly and bitcode representation for metadata
attachments for globals. Future patches will port existing features to use
these new attachments.
Differential Revision: http://reviews.llvm.org/D20074
llvm-svn: 271348
This patch removes the llvm intrinsics VPMOVSX and (V)PMOVZX sign/zero extension intrinsics and auto-upgrades to SEXT/ZEXT calls instead. We already did this for SSE41 PMOVSX sometime ago so much of that implementation can be reused.
Reapplied now that the the companion patch (D20684) removes/auto-upgrade the clang intrinsics has been committed.
Differential Revision: http://reviews.llvm.org/D20686
llvm-svn: 271131
r231483 taught ConstantRange::multiply to be clever about signed vs unsigned ranges. For example, an unsigned range could be full-set while the signed range is more specific than that.
In looking at the allocations trace for LTO'ing verify-uselistorder (see r236629 for details), millions of allocations are from APInt, many of which come from ConstantRange's.
This change tries to avoid some (3.2 million) allocations by returning the unsigned range if its suitable. The checks here are that it should not be a wrapping range, and should be positive. That should be enough to check for ranges such as [1, 10) which the signed range will be equal to, if we were to calculate it.
Differential Revision: http://reviews.llvm.org/D20723
Reviewed by James Molloy
llvm-svn: 271020
This patch removes the llvm intrinsics VPMOVSX and (V)PMOVZX sign/zero extension intrinsics and auto-upgrades to SEXT/ZEXT calls instead. We already did this for SSE41 PMOVSX sometime ago so much of that implementation can be reused.
A companion patch (D20684) removes/auto-upgrade the clang intrinsics.
Differential Revision: http://reviews.llvm.org/D20686
llvm-svn: 270973
Summary:
If an index for a vector or array type is out-of-range GEP constant
folding tries to factor it into preceding dimensions. The code however
does not consider addressing of structure field padding which should not
qualify as out-of-range index.
As demonstrated by the testcase, this can occur if the indexing
performed on a vector type and the preceding index is an array type.
SROA generates GEPs for example involving padding bytes as it slices an
alloca.
My fix disables this folding if the element type is a vector type. I
believe that this is the only way we can end up with padding. (We have
no access to DataLayout so I am not sure if there is actual robust way
of actually checking the presence of padding.)
Reviewers: majnemer
Subscribers: llvm-commits, Gerolf
Differential Revision: http://reviews.llvm.org/D20663
llvm-svn: 270826
When we have "Image Info Version" module flag but don't have "Class Properties"
module flag, set "Class Properties" module flag to 0, so we can correctly emit
errors when one module has the flag set and another module does not.
rdar://26469641
llvm-svn: 270791
Since r268966 the modern Verifier pass defaults to stripping invalid debug info
in nonasserts builds. This patch ports this behavior back to the legacy
Verifier pass as well. The primary motivation is that the clang frontend
accepts bitcode files as input but is still using the legacy pass pipeline.
Background: The problem I'm trying to solve with this sequence of patches is
that historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about breaking
bitcode compatibility with existing producers. For example, we don't necessarily
want IR produced by an older version of clang to be rejected by an LTO link just
because of malformed debug info, and rather provide an option to strip it. Note
that merely outdated (but well-formed) debug info would continue to be
auto-upgraded in this scenario.
http://reviews.llvm.org/D20629
<rdar://problem/26448800>
llvm-svn: 270768
This is probably correct for all uses except cross-module IR linking,
where we need to move the comdat from the source module to the
destination module.
Fixes PR27870.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D20631
llvm-svn: 270743
Followup to D20528 clang patch, this removes the (V)CVTDQ2PD(Y) and (V)CVTPS2PD(Y) llvm intrinsics and auto-upgrades to sitofp/fpext instead.
Differential Revision: http://reviews.llvm.org/D20568
llvm-svn: 270678
Summary: This needs to get in before anything is released concerning attribute. If the old name gets in the wild, then we are stuck with it forever. Putting it in its own diff should getting that part at least in fast.
Reviewers: Wallbraker, whitequark, joker.eph, echristo, rafael, jyknight
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D20417
llvm-svn: 270452
This removes the subclasses of ProfileSummary, moves the members of the derived classes to the base class.
Differential Revision: http://reviews.llvm.org/D20390
llvm-svn: 270143
This splits ProfileSummary into two classes: a ProfileSummary class that has methods to convert from/to metadata and a ProfileSummaryBuilder class that computes the profiles summary which is in ProfileData.
Differential Revision: http://reviews.llvm.org/D20314
llvm-svn: 270136
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h, and fixed an UB in the new change.
Patch by Diana Picus.
llvm-svn: 269655
Vector GEP with mixed (vector and scalar) indices failed on the InstSimplify Pass when all indices are constants.
Differential revision http://reviews.llvm.org/D20149
llvm-svn: 269590
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h.
Patch by Diana Picus.
llvm-svn: 269563
Suggested by Adrian. This is NFC right now but is more clean and
robust against future potential new debug info intrinsics.
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
llvm-svn: 269540
Suggested by Adrian. This is NFC right now but is more clean and
robust against future potential new debug info intrinsics.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 269537
This reverts commit r269428, as it breaks the LLDB build. We need to
understand how to change LLDB in the same way as LLC before landing this
again.
llvm-svn: 269432
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Patch by Diana Picus.
llvm-svn: 269428
This new verifier rule lets us unambigously pick a calling convention
when creating a new declaration for
`@llvm.experimental.deoptimize.<ty>`. It is also congruent with our
lowering strategy -- since all calls to `@llvm.experimental.deoptimize`
are lowered to calls to `__llvm_deoptimize`, it is reasonable to enforce
a unique calling convention.
Some of the tests that were breaking this verifier rule have had to be
split up into different .ll files.
The inliner was violating this rule as well, and has been fixed to avoid
producing invalid IR.
llvm-svn: 269261
DbgInfoIntrinsic::StripCast() is dead since r79977
The only function that creates Comdat objects seems to be in Module, and always creates them using the default constructor.
llvm-svn: 269204
Extract a part of isDereferenceableAndAlignedPointer functionality to Value:
Reviewed By: hfinkel, sanjoy
Differential Revision: http://reviews.llvm.org/D17611
llvm-svn: 269190
allow the transformation to strip invalid debug info.
This patch separates the Verifier into an analysis and a transformation
pass, with the transformation pass optionally stripping malformed
debug info.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
http://reviews.llvm.org/D19988
rdar://problem/25818489
This reapplies r268937 without modifications.
llvm-svn: 268966
This patch introduces a new option -lto-strip-invalid-debug-info, which
drops malformed debug info from the input.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
rdar://problem/25818489
http://reviews.llvm.org/D19987
This reapplies 268936 with a test case fix for Linux (-exported-symbol foo)
llvm-svn: 268965
allow the transformation to strip invalid debug info.
This patch separates the Verifier into an analysis and a transformation
pass, with the transformation pass optionally stripping malformed
debug info.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
http://reviews.llvm.org/D19988
rdar://problem/25818489
llvm-svn: 268937
This patch introduces a new option -lto-strip-invalid-debug-info, which
drops malformed debug info from the input.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
rdar://problem/25818489
http://reviews.llvm.org/D19987
llvm-svn: 268936
This moves the code that handles stripping debug info intrinsic from
StripDebugInfo(Module) to StripDebugInfo(Function). The latter is
already walking every instructions so it makes sense to do it at the
same time.
This makes also stripDebugInfo(Function) as an API more useful: it
is really dropping every debug info in the Function.
Finally the existing code is trigerring an assertion when the Module
is not fully materialized.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268847
This moves the code that handles stripping debug info intrinsic from
StripDebugInfo(Module) to StripDebugInfo(Function). The latter is
already walking every instructions so it makes sense to do it at the
same time.
This makes also stripDebugInfo(Function) as an API more useful: it
is really dropping every debug info in the Function.
Finally the existing code is trigerring an assertion when the Module
is not fully materialized.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268832
info metadata errors separately. (NFC)
This patch refactors the Verifier so it can diagnose IR validation errors
and debug info metadata errors separately.
The motivation behind this change is that broken (or outdated) debug info
can be "recovered" from by stripping the debug info.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info.
We want to be able to make the verifier stricter without having to worry
about breaking bitcode compatibility with existing producers. For example,
we don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
http://reviews.llvm.org/D19986
rdar://problem/25818489
llvm-svn: 268778
Summary:
This will be used for AMDGPU_HSA_KERNEL symbol type in output ELF.
Also, in the future unused non-kernels may be optimized.
For now, also accept SPIR_KERNEL for HCC frontend.
Also, add bitcode compatibility tests for missing calling conventions
except AVR_BUILTIN which doesn't have parse code.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, joker.eph, llvm-commits
llvm-svn: 268717
This reapplies commit r268521, that was reverted in r268530 due to a test failure in select-implied.ll
Modified the test case to reflect the new change.
llvm-svn: 268557
ConstantFold has logic to take icmp (bitcast x to y), null and strip the
bitcast. This makes sense in general, but not if x has floating-point type. In
this case, we'd need a fcmp, not an icmp, and the code will assert. We normally
don't see this situation because we constant fold fp -> int bitcasts, however,
we'll see it for bitcasts of ppc_fp128 -> i128. This is because that bitcast is
Endian-dependent, and as a result, we don't simplify it in ConstantFold (we
could, but no one has yet added the necessary logic). Regardless, ConstantFold
should not depend on that canonicalization for correctness.
llvm-svn: 268534
Make it possible that TryToSimplifyUncondBranchFromEmptyBlock merges empty
basic block including lifetime intrinsics as well as phi nodes and
unconditional branch into its successor or predecessor(s).
If successor of empty block has single predecessor, all contents including
lifetime intrinsics are sinked into the successor. Otherwise, they are
hoisted into its predecessor(s) and then merged into the predecessor(s).
Patch by Josh Yoon <josh.yoon@samsung.com>!
Differential Revision: http://reviews.llvm.org/D19257
llvm-svn: 268254
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
We neglected to transfer operand bundles for some transforms. These
were found via inspection, I'll try to come up with some test cases.
llvm-svn: 268011
Extract a part of isDereferenceableAndAlignedPointer functionality to Value::getPointerDerferecnceableBytes. Currently it's a NFC, but in future I'm going to accumulate all the logic about value dereferenceability in this function similarly to Value::getPointerAlignment function (D16144).
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17572
llvm-svn: 267708
Teach Value::getPointerAlignment that allocas with no explicit alignment are aligned to preferred alignment of the allocated type.
Reviewed By: hfinkel
Differential Revision: http://reviews.llvm.org/D17569
llvm-svn: 267689
This is part of solving PR27344:
https://llvm.org/bugs/show_bug.cgi?id=27344
CGP should undo the SimplifyCFG transform for the same reason that earlier patches have used this
same mechanism: it's possible that passes between SimplifyCFG and CGP may be able to optimize the
IR further with a select in place.
For the TLI hook default, >99% taken or not taken is chosen as the default threshold for a highly
predictable branch. Even the most limited HW branch predictors will be correct on this branch almost
all the time, so even a massive mispredict penalty perf loss would be overcome by the win from all
the times the branch was predicted correctly.
As a follow-up, we could make the default target hook less conservative by using the SchedMachineModel's
MispredictPenalty. Or we could just let targets override the default by implementing the hook with that
and other target-specific options. Note that trying to statically determine mispredict rates for
close-to-balanced profile weight data is generally impossible if the HW is sufficiently advanced. Ie,
50/50 taken/not-taken might still be 100% predictable.
Finally, note that this patch as-is will not solve PR27344 because the current __builtin_unpredictable()
branch weight default values are 4 and 64. A proposal to change that is in D19435.
Differential Revision: http://reviews.llvm.org/D19488
llvm-svn: 267572
Add a typedef for the std::map<GlobalValue::GUID, GlobalValueSummary *>
map that is passed around to identify summaries for values defined in a
particular module. This shortens up declarations in a variety of places.
llvm-svn: 267471
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
This reaplies r267320 without changes after fixing an issue in the OpenMP IR
generator in clang.
llvm-svn: 267370
Summary:
Remove the GlobalValueInfo and change the ModuleSummaryIndex to directly
reference summary objects. The info structure was there to support lazy
parsing of the combined index summary objects, which is no longer
needed and not supported.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19462
llvm-svn: 267344
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
llvm-svn: 267320
A long overdue change to make DIGlobalVariable distinct. Much like
DISubprogram definitions (changed in r246098), it isn't logical to
unique DIGlobalVariable definitions from two different compile units.
(Longer-term, we should also find a way to reverse the link between
GlobalVariable and DIGlobalVariable, and between DIGlobalVariable and
DICompileUnit, so that debug info to do with optimized-out globals
disappears. Admittedly it's harder than with Function/DISubprogram,
since global variables may be constant-folded and the debug info should
still describe that somehow.)
llvm-svn: 267301
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
Each reference to an unresolved MDNode is expensive, since the RAUW
support in MDNode uses a separate allocation and side map. Since
a distinct MDNode doesn't require its operands on creation (unlike
uniuqed nodes, there's no need to check for structural equivalence),
use nullptr for any of its unresolved operands. Besides reducing the
burden on MDNode maps, this can avoid allocating temporary MDNodes in
the first place.
We need some way to track operands. Invent DistinctMDOperandPlaceholder
for this purpose, which is a Metadata subclass that holds an ID and
points at its single user. DistinctMDOperandPlaceholder::replaceUseWith
is just like RAUW, but its name highlights that there is only ever
exactly one use.
There is no support for moving (or, obviously, copying) these. Move
support would be possible but expensive; leaving it unimplemented
prevents user error. In the BitcodeReader I originally considered
allocating on a BumpPtrAllocator and keeping a vector of pointers to
them, and then I realized that std::deque implements exactly this.
A couple of obvious follow-ups:
- Change ValueEnumerator to emit distinct nodes first to take more
advantage of this optimization. (How convenient... I think I might
have a couple of patches for this.)
- Change DIBuilder and its consumers (like CGDebugInfo in clang) to
use something like this when constructing debug info in the first
place.
llvm-svn: 267270
The only functionality change was removing an error check from the
BitcodeReader (and an assertion from DILocation::getImpl) that is
already caught by Verifier::visitDILocation. The Verifier is a better
place for this anyway, and being inconsistent with other subclasses of
MDNode isn't serving anyone.
llvm-svn: 267267
The original commit was reverted because of a buildbot problem with LazyCallGraph::SCC handling (not related to the OptBisect handling).
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267231
Summary: eq imply [u|s]ge and [u|s]le are true.
Remove redundant logic by implementing isImpliedFalseByMatchingCmp(Pred1, Pred2)
as isImpliedTrueByMatchingCmp(Pred1, getInversePredicate(Pred2)).
llvm-svn: 267177
Summary: [u|s]gt and [u|s]lt imply [u|s]ge and [u|s]le are true, respectively.
I've simplified the existing tests and added additional tests to cover the new
cases mentioned above. I've also added tests for all the cases where the
first compare doesn't imply anything about the second compare.
llvm-svn: 267171
EarlyCSE had inconsistent behavior with regards to flag'd instructions:
- In some cases, it would pessimize if the available instruction had
different flags by not performing CSE.
- In other cases, it would miscompile if it replaced an instruction
which had no flags with an instruction which has flags.
Fix this by being more consistent with our flag handling by utilizing
andIRFlags.
llvm-svn: 267111
Summary: As per title. This will help work on the C API.
Reviewers: Wallbraker, whitequark, joker.eph, echristo, rafael
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19173
llvm-svn: 267057
Anna Thomas