This is similar to the LLVM change https://reviews.llvm.org/D46290.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46320
llvm-svn: 331834
Add PostAllocatorCall program point to represent the moment in the analysis
between the operator new() call and the constructor call. Pointer cast from
"void *" to the correct object pointer type has already happened by this point.
The new program point, unlike the previously used PostImplicitCall, contains a
reference to the new-expression, which allows adding path diagnostics over it.
Differential Revision: https://reviews.llvm.org/D41800
rdar://problem/12180598
llvm-svn: 322796
The callback runs after operator new() and before the construction and allows
the checker to access the casted return value of operator new() (in the
sense of r322780) which is not available in the PostCall callback for the
allocator call.
Update MallocChecker to use the new callback instead of PostStmt<CXXNewExpr>,
which gets called after the constructor.
Differential Revision: https://reviews.llvm.org/D41406
rdar://problem/12180598
llvm-svn: 322787
This patch adds LocationContext to checkRegionChanges and removes
wantsRegionChangeUpdate as it was unused.
A patch by Krzysztof Wiśniewski!
Differential Revision: https://reviews.llvm.org/D27090
llvm-svn: 291869
Remove the check::RegionChanges::wantsRegionChangeUpdate callback as it is no
longer used (since checkPointerEscape has been added).
A patch by Krzysztof Wiśniewski!
Differential Revision: https://reviews.llvm.org/D26759
llvm-svn: 287175
Add a checker callback that is called when the analyzer starts analyzing a
function either at the top level or when inlined. This will be used by a
follow-on patch making the DeallocChecker path sensitive.
Differential Revision: http://reviews.llvm.org/D17418
llvm-svn: 261293
In Objective-C, method calls with nil receivers are essentially no-ops. They
do not fault (although the returned value may be garbage depending on the
declared return type and architecture). Programmers are aware of this
behavior and will complain about a false alarm when the analyzer
diagnoses API violations for method calls when the receiver is known to
be nil.
Rather than require each individual checker to be aware of this behavior
and suppress a warning when the receiver is nil, this commit
changes ExprEngineObjC so that VisitObjCMessage skips calling checker
pre/post handlers when the receiver is definitely nil. Instead, it adds a
new event, ObjCMessageNil, that is only called in that case.
The CallAndMessageChecker explicitly cares about this case, so I've changed it
to add a callback for ObjCMessageNil and moved the logic in PreObjCMessage
that handles nil receivers to the new callback.
rdar://problem/18092611
Differential Revision: http://reviews.llvm.org/D12123
llvm-svn: 247653
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
llvm-svn: 240270
With this patch things like preserving contents of regions (either hi- or low-level ones) or processing of the only top-level region can be implemented easily without passing around extra parameters.
This patch is a first step towards adequate modeling of memcpy() by the CStringChecker checker and towards eliminating of majority of false-positives produced by the NewDeleteLeaks checker.
llvm-svn: 191342
Add a new callback that notifies checkers when a const pointer escapes. Currently, this only works
for const pointers passed as a top level parameter into a function. We need to differentiate the const
pointers escape from regular escape since the content pointed by const pointer will not change;
if it’s a file handle, a file cannot be closed; but delete is allowed on const pointers.
This should suppress several false positives reported by the NewDelete checker on llvm codebase.
llvm-svn: 178310
The checkPointerEscape callback previously did not specify how a
pointer escaped. This change includes an enum which describes the
different ways a pointer may escape. This enum is passed to the
checkPointerEscape callback when a pointer escapes. If the escape
is due to a function call, the call is passed. This changes
previous behavior where the call is passed as NULL if the escape
was due to indirectly invalidating the region the pointer referenced.
A patch by Branden Archer!
llvm-svn: 174677
Instead of using several callbacks to identify the pointer escape event,
checkers now can register for the checkPointerEscape.
Converted the Malloc checker to use the new callback.
SimpleStreamChecker will be converted next.
llvm-svn: 170625
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
I believe the removed assert in CheckerManager says it best:
InlineCall is a special hacky callback to allow intrusive
evaluation of the call (which simulates inlining). It is
currently only used by OSAtomicChecker and should go away
at some point.
OSAtomicChecker has gone away; inlineCall can now go away as well!
llvm-svn: 165865
This allows checkers (like the MallocChecker) to process the effects of the
bind. Previously, using a memory-allocating function (like strdup()) in an
initializer would result in a leak warning.
This does bend the expectations of checkBind a bit; since there is no
assignment expression, the statement being used is the initializer value.
In most cases this shouldn't matter because we'll use a PostInitializer
program point (rather than PostStmt) for any checker-generated nodes, though
we /will/ generate a PostStore node referencing the internal statement.
(In theory this could have funny effects if someone actually does an
assignment within an initializer; in practice, that seems like it would be
very rare.)
<rdar://problem/12171711>
llvm-svn: 162637
While there is now some duplication between SimpleCall and the CXXInstanceCall
sub-hierarchy, this is much better than copy-and-pasting the devirtualization
logic shared by both instance methods and destructors.
An unfortunate side effect is that there is no longer a single CallEvent type
that corresponds to "calls written as CallExprs". For the most part this is a
good thing, but the checker callback eval::Call still takes a CallExpr rather
than a CallEvent (since we're not sure if we want to allow checkers to
evaluate other kinds of calls). A mistake here will be caught by a cast<> in
CheckerManager::runCheckersForEvalCall.
No functionality change.
llvm-svn: 161809
Previously, we were only checking the origin expressions of inlined calls.
Checkers using the generic postCall and older postObjCMessage callbacks were
ignored. Now that we have CallEventManager, it is much easier to create
a CallEvent generically when exiting an inlined function, which we can then
use for post-call checks.
No test case because we don't (yet) have any checkers that depend on this
behavior (which is why it hadn't been fixed before now).
llvm-svn: 161005
This ensures that it is valid to reference-count any CallEvents, and we
won't accidentally try to reclaim a CallEvent that lives on the stack.
It also hides an ugly switch statement for handling CallExprs!
There should be no functionality change here.
llvm-svn: 160986
These are currently unused, but are intended to be used in lieu of PreStmt
and PostStmt when the call is implicit (e.g. an automatic object destructor).
This also modifies the Data1 field of ProgramPoints to allow storing any
pointer-sized value, as opposed to only aligned pointers. This is necessary
to store SourceLocations.
There is currently no BugReporter support for these; they should be skipped
over in any diagnostic output.
This commit also tags checkers that currently rely on function calls only
occurring at StmtPoints.
llvm-svn: 160019
The preObjCMessage and postObjCMessage callbacks now take an ObjCMethodCall
argument, which can represent an explicit message send (ObjCMessageSend) or an
implicit message generated by a property access (ObjCPropertyAccess).
llvm-svn: 159559
This is intended to replace CallOrObjCMessage, and is eventually intended to be
used for anything that cares more about /what/ is being called than /how/ it's
being called. For example, inlining destructors should be the same as inlining
blocks, and checking __attribute__((nonnull)) should apply to the allocator
calls generated by operator new.
llvm-svn: 159554
This is needed to ensure that we always report issues in the correct
function. For example, leaks are identified when we call remove dead
bindings. In order to make sure we report a callee's leak in the callee,
we have to run the operation in the callee's context.
This change required quite a bit of infrastructure work since:
- We used to only run remove dead bindings before a given statement;
here we need to run it after the last statement in the function. For
this, we added additional Program Point and special mode in the
SymbolReaper to remove all symbols in context lower than the current
one.
- The call exit operation turned into a sequence of nodes, which are
now guarded by CallExitBegin and CallExitEnd nodes for clarity and
convenience.
(Sorry for the long diff.)
llvm-svn: 155244
we use the same Expr* as the one being currently visited. This is preparation for transitioning to having
ProgramPoints refer to CFGStmts.
This required a bit of trickery. We wish to keep the old Expr* bindings in the Environment intact,
as plenty of logic relies on it and there is no reason to change it, but we sometimes want the Stmt* for
the ProgramPoint to be different than the Expr* being used for bindings. This requires adding an extra
argument for some functions (e.g., evalLocation). This looks a bit strange for some clients, but
it will look a lot cleaner when were start using CFGStmt* in the appropriate places.
As some fallout, the diagnostics arrows are a bit difference, since some of the node locations have changed.
I have audited these, and they look reasonable.
llvm-svn: 154214
(In response of Ted's review of r150112.)
This moves the logic which checked if a symbol escapes through a
parameter to invalidateRegionCallback (instead of post CallExpr visit.)
To accommodate the change, added a CallOrObjCMessage parameter to
checkRegionChanges callback.
llvm-svn: 150513
At this point this is largely cosmetic, but it opens the door to replace
ProgramStateRef with a smart pointer that more eagerly acts in the role
of reclaiming unused ProgramState objects.
llvm-svn: 149081
Remove dead members/parameters: ProgramState, respondsToCallback, autoTransition.
Remove addTransition method since it's the same as generateNode. Maybe we should
rename generateNode to genTransition (since a transition is always automatically
generated)?
llvm-svn: 142946
Get rid of the EndOfPathBuilder completely.
Use the generic NodeBuilder to generate nodes.
Enqueue the end of path frontier explicitly.
llvm-svn: 142943
This commit removes the major functional dependency on the ExprEngine::Builder
member variable.
In some cases the code became more verbose. Particularly, we call takeNodes()
and addNodes() to move responsibility for the nodes from one builder to another.
This will get simplified later on.
llvm-svn: 142831
First step toward removing the global Stmt builder. Added several transitional methods (like takeNodes/addNodes).
+ Stop early if the set of exploded nodes for the next iteration is empty.
llvm-svn: 142827
NodeBuilder should not assume it's dealing with a single predecessor. Remove predecessor getters. Modify the BranchNodeBuilder to not be responsible for doing auto-transitions (which depend on a predecessor).
llvm-svn: 142453
Take advantage of the new builders for branch processing. As part of this change pass generic NodeBuilder (instead of BranchNodeBuilder) to the BranchCondition callback and remove the unused methods form BranchBuilder.
llvm-svn: 142448
George Karpenkov