Summary:
1. Make coroutine representation more robust against optimization that may duplicate instruction by introducing coro.id intrinsics that returns a token that will get fed into coro.alloc and coro.begin. Due to coro.id returning a token, it won't get duplicated and can be used as reliable indicator of coroutine identify when a particular coroutine call gets inlined.
2. Move last three arguments of coro.begin into coro.id as they will be shared if coro.begin will get duplicated.
3. doc + test + code updated to support the new intrinsic.
Reviewers: mehdi_amini, majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23412
llvm-svn: 278481
Remove all ilist_iterator to pointer casts. There were two reasons for
casts:
- Checking for an uninitialized (i.e., null) iterator. I added
MachineInstrBundleIterator::isValid() to check for that case.
- Comparing an iterator against the underlying pointer value while
avoiding converting the pointer value to an iterator. This is
occasionally necessary in MachineInstrBundleIterator, since there is
an assertion in the constructors that the underlying MachineInstr is
not bundled (but we don't care about that if we're just checking for
pointer equality).
To support the latter case, I rewrote the == and != operators for
ilist_iterator and MachineInstrBundleIterator.
- The implicit constructors now use enable_if to exclude
const-iterator => non-const-iterator conversions from overload
resolution (previously it was a compiler error on instantiation, now
it's SFINAE).
- The == and != operators are now global (friends), and are not
templated.
- MachineInstrBundleIterator has overloads to compare against both
const_pointer and const_reference. This avoids the implicit
conversions to MachineInstrBundleIterator that assert, instead just
checking the address (and I added unit tests to confirm this).
Notably, the only remaining uses of ilist_iterator::getNodePtrUnchecked
are in ilist.h, and no code outside of ilist*.h directly relies on this
UB end-iterator-to-pointer conversion anymore. It's still needed for
ilist_*sentinel_traits, but I'll clean that up soon.
llvm-svn: 278478
Allow an ilist_iterator to be constructed from an ilist_node, and give
access to the underlying ilist_node as well.
This will be used immediately in lld to support a type-erasure use case.
Longer term, they'll stick around once the iterator is using
ilist_node<NodeTy>* instead of NodeTy*.
llvm-svn: 278467
"insert_subreg, subreg_to_reg, and reg_sequence" instructions' after
adjusting some unittest checks.
This is to solve PR28852. The restriction was added at 2010 to make better register
coalescing. We assumed that it was not necessary any more. Testing results on x86
supported the assumption.
We will look closely to any performance impact it will bring and will be prepared
to help analyzing performance problem found on other architectures.
Differential Revision: https://reviews.llvm.org/D23210
llvm-svn: 278466
Summary: This is a follow up to r278389, where I have introduced the bug
Reviewers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D23436
llvm-svn: 278442
Summary:
Notice that the data layout is changed: instead of using
std::pair<PointerIntPair<NodeType*, 1>, ChildItTy>, now use
std::pair<NodeRef, Optional<ChildItTy>>.
A NFC but worth noticing change is operator==(), since we only compare
an iterator against end(), it's better to put an assert there and make
people noticed when it fails.
Reviewers: dblaikie, chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D23146
llvm-svn: 278437
Summary:
This patch adds IsVariadicFunction bit to summary in order
to not import variadic functions. Inliner doesn't inline
variadic functions because it is hard to reason about it.
This one small fix improves Importer by about 16%
(going from 86% to 100% of imported functions that are
inlined anywhere)
on some spec benchmarks like 'int' and others.
Reviewers: eraman, mehdi_amini, tejohnson
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23339
llvm-svn: 278432
Summary:
This is an extension of the fix in r271424. That fix dealt with builder
insert points being moved by SCEV expansion, but only for the lifetime
of the expand call. This change modifies the interface so that LSR can
safely call expand multiple times at the same insert point and do the
right thing if one of the expansions decides to move the original insert
point.
This is a fix for PR28719.
Reviewers: sanjoy
Subscribers: llvm-commits, mcrosier, mzolotukhin
Differential Revision: https://reviews.llvm.org/D23342
llvm-svn: 278413
Summary: Make Optional's behavior the same as the coming std::optional.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23178
llvm-svn: 278397
Summary:
Keep track of all methods for which we have devirtualized at least
one call and then print them sorted alphabetically. That allows to
avoid duplicates and also makes the order deterministic.
Add optimization names into the remarks, so that it's easier to
understand how has each method been devirtualized.
Fix a bug when wrong methods could have been reported for
tryVirtualConstProp.
Reviewers: kcc, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23297
llvm-svn: 278389
subreg_to_reg, and reg_sequence" instructions.
This is to solve PR28852. The restriction was added at 2010 to make better register
coalescing. We assumed that it was not necessary any more. Testing results on x86
supported the assumption.
We will look closely to any performance impact it will bring and will be prepared
to help analyzing performance problem found on other architectures.
Differential Revision: https://reviews.llvm.org/D23210
llvm-svn: 278384
This adds a createFunctionInliningPass pass that takes an InlineParams object and use this to create the pre-inliner pass. This prevents the regular inliner's threshold flag from influencing the preinliner.
Differential revision: https://reviews.llvm.org/D23377
llvm-svn: 278377
ExecutionEngine::runFunction is supposed to allow execution of arbitrary
function types, but MCJIT can only reasonably support a limited subset of
main-linke function types. This patch documents this limitation, and fixes
MCJIT::runFunction to abort with a meaningful error at runtime if called with
an unsupported function type.
llvm-svn: 278348
This restores commit r278330, with fixes for a few bot failures:
- Fix a late change I had made to the save temps output file that I
missed due to existing files sitting on my disk
- Fix a bunch of Windows bot failures with "ambiguous call to overloaded
function" due to confusion between llvm::make_unique vs
std::make_unique (preface the new make_unique calls with "llvm::")
- Attempt to fix a modules bot failure by adding a missing include
to LTO/Config.h.
Original change:
Resolution-based LTO API.
Summary:
This introduces a resolution-based LTO API. The main advantage of this API over
existing APIs is that it allows the linker to supply a resolution for each
symbol in each object, rather than the combined object as a whole. This will
become increasingly important for use cases such as ThinLTO which require us
to process symbol resolutions in a more complicated way than just adjusting
linkage.
Patch by Peter Collingbourne.
Reviewers: rafael, tejohnson, mehdi_amini
Subscribers: lhames, tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D20268
llvm-svn: 278338
This reverts commit r278330.
I made a change to the save temps output that is causing issues with the
bots. Didn't realize this because I had older output files sitting on
disk in my test output directory.
llvm-svn: 278331
Summary:
This introduces a resolution-based LTO API. The main advantage of this API over
existing APIs is that it allows the linker to supply a resolution for each
symbol in each object, rather than the combined object as a whole. This will
become increasingly important for use cases such as ThinLTO which require us
to process symbol resolutions in a more complicated way than just adjusting
linkage.
Patch by Peter Collingbourne.
Reviewers: rafael, tejohnson, mehdi_amini
Subscribers: lhames, tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D20268
Address review comments
llvm-svn: 278330
It's more than just inttoptr, but the others can't be tested until we have
support for non-trivial constants (they currently get unavoidably folded to a
ConstantInt).
llvm-svn: 278303
Summary:
This patch define and implement amdgcn image intrinsics with sampler.
1. define vdata type to be llvm_anyfloat_ty, address type to be llvm_anyfloat_ty,
and rsrc type to be llvm_anyint_ty. As a result, we expect the intrinsics name
to have three suffixes to overload each of these three types;
2. D128 as well as two other flags are implied in the three types, for example,
if you use v8i32 as resource type, then r128 is 0!
3. don't expose TFE flag, and other flags are exposed in the instruction order:
unrm, glc, slc, lwe and da.
Differential Revision: http://reviews.llvm.org/D22838
Reviewed by:
arsenm and tstellarAMD
llvm-svn: 278291
Summary:
I think it is much better this way.
When I firstly saw line:
Cost += InlineConstants::LastCallToStaticBonus;
I though that this is a bug, because everywhere where the cost is being reduced
it is usuing -=.
Reviewers: eraman, tejohnson, mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23222
llvm-svn: 278290
Summary: make_scope_exit() is described in C++ proposal p0052r2, which uses RAII to do cleanup works at scope exit.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22796
llvm-svn: 278251
Summary:
A particular coroutine usage pattern, where a coroutine is created, manipulated and
destroyed by the same calling function, is common for coroutines implementing
RAII idiom and is suitable for allocation elision optimization which avoid
dynamic allocation by storing the coroutine frame as a static `alloca` in its
caller.
coro.free and coro.alloc intrinsics are used to indicate which code needs to be suppressed
when dynamic allocation elision happens:
```
entry:
%elide = call i8* @llvm.coro.alloc()
%need.dyn.alloc = icmp ne i8* %elide, null
br i1 %need.dyn.alloc, label %coro.begin, label %dyn.alloc
dyn.alloc:
%alloc = call i8* @CustomAlloc(i32 4)
br label %coro.begin
coro.begin:
%phi = phi i8* [ %elide, %entry ], [ %alloc, %dyn.alloc ]
%hdl = call i8* @llvm.coro.begin(i8* %phi, i32 0, i8* null,
i8* bitcast ([2 x void (%f.frame*)*]* @f.resumers to i8*))
```
and
```
%mem = call i8* @llvm.coro.free(i8* %hdl)
%need.dyn.free = icmp ne i8* %mem, null
br i1 %need.dyn.free, label %dyn.free, label %if.end
dyn.free:
call void @CustomFree(i8* %mem)
br label %if.end
if.end:
...
```
If heap allocation elision is performed, we replace coro.alloc with a static alloca on the caller frame and coro.free with null constant.
Also, we need to make sure that if there are any tail calls referencing the coroutine frame, we need to remote tail call attribute, since now coroutine frame lives on the stack.
Documentation and overview is here: http://llvm.org/docs/Coroutines.html.
Upstreaming sequence (rough plan)
1.Add documentation. (https://reviews.llvm.org/D22603)
2.Add coroutine intrinsics. (https://reviews.llvm.org/D22659)
3.Add empty coroutine passes. (https://reviews.llvm.org/D22847)
4.Add coroutine devirtualization + tests.
ab) Lower coro.resume and coro.destroy (https://reviews.llvm.org/D22998)
c) Do devirtualization (https://reviews.llvm.org/D23229)
5.Add CGSCC restart trigger + tests. (https://reviews.llvm.org/D23234)
6.Add coroutine heap elision + tests. <= we are here
7.Add the rest of the logic (split into more patches)
Reviewers: mehdi_amini, majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23245
llvm-svn: 278242
This adds an InlineParams struct which is populated from the command line options by getInlineParams and passed to getInlineCost for the call analyzer to use.
Differential revision: https://reviews.llvm.org/D22120
llvm-svn: 278189
Summary:
The inliner not being a function pass requires the work-around of
generating the OptimizationRemarkEmitter and in turn BFI on demand.
This will go away after the new PM is ready.
BFI is only computed inside ORE if the user has requested hotness
information for optimization diagnostitics (-pass-remark-with-hotness at
the 'opt' level). Thus there is no additional overhead without the
flag.
Reviewers: hfinkel, davidxl, eraman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22694
llvm-svn: 278185
In case there are compilers that support neither __FUNCSIG__ or
__PRETTY_FUNCTION__, we fall back to __func__ as a last resort,
which should be guaranteed by C++11 and C99.
llvm-svn: 278176
MSVC doesn't have this, it only has __FUNCSIG__. So this adds
a new macro called LLVM_PRETTY_FUNCTION which evaluates to the
right thing on any platform.
llvm-svn: 278170
For now put them all in the entry block. This should be correct but may give
poor runtime performance. Hopefully MachineSinking combined with
isReMaterializable can solve those issues, but if not the interface is sound
enough to support alternatives.
llvm-svn: 278168
The patch is to fix the bug in PR28705. It was caused by setting wrong return
value for SCEVExpander::findExistingExpansion. The return values of findExistingExpansion
have different meanings when the function is used in different ways so it is easy to make
mistake. The fix creates two new interfaces to replace SCEVExpander::findExistingExpansion,
and specifies where each interface is expected to be used.
Differential Revision: https://reviews.llvm.org/D22942
llvm-svn: 278161
The fix for PR28705 will be committed consecutively.
In D12090, the ExprValueMap was added to reuse existing value during SCEV expansion.
However, const folding and sext/zext distribution can make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to expand S3 as
V1 - C_a + C_b instead of expanding S2 literally. It is helpful when S2 is a
complex SCEV expr and S2 has no entry in ExprValueMap, which is usually caused
by the fact that S3 is generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV to
ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a} into the
ExprValueMap when we create SCEV for V1. When S3 is expanded, it will first
expand S2 to V1 - C_a because of S2->{V1, C_a} in the map, then expand S3 to
V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
llvm-svn: 278160
Gor Nishanov