Before we had:
ClangFunction
ClangUtilityFunction
ClangUserExpression
and code all over in lldb that explicitly made Clang-based expressions. This patch adds an Expression
base class, and three pure virtual implementations for the Expression kinds:
FunctionCaller
UtilityFunction
UserExpression
You can request one of these expression types from the Target using the Get<ExpressionType>ForLanguage.
The Target will then consult all the registered TypeSystem plugins, and if the type system that matches
the language can make an expression of that kind, it will do so and return it.
Because all of the real expression types need to communicate with their ExpressionParser in a uniform way,
I also added a ExpressionTypeSystemHelper class that expressions generically can vend, and a ClangExpressionHelper
that encapsulates the operations that the ClangExpressionParser needs to perform on the ClangExpression types.
Then each of the Clang* expression kinds constructs the appropriate helper to do what it needs.
The patch also fixes a wart in the UtilityFunction that to use it you had to create a parallel FunctionCaller
to actually call the function made by the UtilityFunction. Now the UtilityFunction can be asked to vend a
FunctionCaller that will run its function. This cleaned up a lot of boiler plate code using UtilityFunctions.
Note, in this patch all the expression types explicitly depend on the LLVM JIT and IR, and all the common
JIT running code is in the FunctionCaller etc base classes. At some point we could also abstract that dependency
but I don't see us adding another back end in the near term, so I'll leave that exercise till it is actually necessary.
llvm-svn: 247720
stores information about a variable that different parts of LLDB use, from the
compiler-specific portion that only the expression parser cares about.
http://reviews.llvm.org/D12602
llvm-svn: 246871
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
Create a new "lldb_private::CompilerDeclContext" class that will replace all direct uses of "clang::DeclContext" when used in compiler agnostic code, yet still allow for conversion to clang::DeclContext subclasses by clang specific code. This completes the abstraction of type parsing by removing all "clang::" references from the SymbolFileDWARF. The new "lldb_private::CompilerDeclContext" class abstracts decl contexts found in compiler type systems so they can be used in internal API calls. The TypeSystem is required to support CompilerDeclContexts with new pure virtual functions that start with "DeclContext" in the member function names. Converted all code that used lldb_private::ClangNamespaceDecl over to use the new CompilerDeclContext class and removed the ClangNamespaceDecl.cpp and ClangNamespaceDecl.h files.
Removed direct use of clang APIs from SBType and now use the abstract type systems to correctly explore types.
Bulk renames for things that used to return a ClangASTType which is now CompilerType:
"Type::GetClangFullType()" to "Type::GetFullCompilerType()"
"Type::GetClangLayoutType()" to "Type::GetLayoutCompilerType()"
"Type::GetClangForwardType()" to "Type::GetForwardCompilerType()"
"Value::GetClangType()" to "Value::GetCompilerType()"
"Value::SetClangType (const CompilerType &)" to "Value::SetCompilerType (const CompilerType &)"
"ValueObject::GetClangType ()" to "ValueObject::GetCompilerType()"
many more renames that are similar.
llvm-svn: 245905
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
owners list, so the StopInfo machinery can get the list of owners without
some other thread being able to mess up the list by deleting/disabline one of its
locations in the process of doing so.
<rdar://problem/18685197>
llvm-svn: 243541
counts. If you delete a breakpoint belonging to a site just as you are
processing a hit on that site, you could cause the BreakpointSite loop to
access a now deleted location.
<rdar://problem/19310323>
llvm-svn: 243507
Target and breakpoints options were added:
breakpoint set --language lang --name func
settings set target.language pascal
These specify the Language to use when interpreting the breakpoint's
expression (note: currently only implemented for breakpoints on
identifiers). If the breakpoint language is not set, the target.language
setting is used.
This support is required by Pascal, for example, to set breakpoint at 'ns.foo'
for function 'foo' in namespace 'ns'.
Tests on the language were also added to Module::PrepareForFunctionNameLookup
for efficiency.
Reviewed by: clayborg
Subscribers: jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D11119
llvm-svn: 242844
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This patch initially was committed in r237460 but later it was reverted (r237479) due to 4 new failures:
* TestExitDuringStep.py
* TestNumThreads.py
* TestThreadExit.py
* TestThreadStates.py
This patch also fixes these tests.
llvm-svn: 237566
Summary:
This option forces to only set a source line breakpoint when there is an exact-match
This patch includes the following commits:
# Add the -m/--exact-match option in "breakpoint set" command
## Add exact_match arg in BreakpointResolverFileLine ctor
## Add m_exact_match field in BreakpointResolverFileLine
## Add exact_match arg in BreakpointResolverFileRegex ctor
## Add m_exact_match field in BreakpointResolverFileRegex
## Add exact_match arg in Target::CreateSourceRegexBreakpoint
## Add exact_match arg in Target::CreateBreakpoint
## Add -m/--exact-match option in "breakpoint set" command
# Add target.exact-match option to skip BP if source line doesn't match
## Add target.exact-match global option
## Add Target::GetExactMatch
## Refactor Target::CreateSourceRegexBreakpoint to accept LazyBool exact_match (was bool)
## Refactor Target::CreateBreakpoint to accept LazyBool exact_match (was bool)
# Add target.exact-match test in SettingsCommandTestCase
# Add BreakpointOptionsTestCase tests to test --skip-prologue/--exact-match options
# Fix a few typos in lldbutil.check_breakpoint_result func
# Rename --exact-match/m_exact_match/exact_match/GetExactMatch to --move-to-nearest-code/m_move_to_nearest_code/move_to_nearest_code/GetMoveToNearestCode
# Add exact_match field in BreakpointResolverFileLine::GetDescription and BreakpointResolverFileRegex::GetDescription, for example:
was:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
now:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, exact_match = 0, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
Test Plan:
./dotest.py -v --executable $BUILDDIR/bin/lldb functionalities/breakpoint/
./dotest.py -v --executable $BUILDDIR/bin/lldb settings/
./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/breakpoint/
Reviewers: jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, jingham
Differential Revision: http://reviews.llvm.org/D9273
llvm-svn: 237460
breakpoints, for instance on the class of the thrown object.
This change doesn't actually make that work, the part where we
extract the thrown object type from the throw site isn't done yet.
This provides a general programmatic "precondition" that you can add
to breakpoints to give them the ability to do filtering on the LLDB
side before we pass the stop on to the user-provided conditions &
callbacks.
llvm-svn: 235538
Summary:
This checkin sends an MI event when a module is loaded that causes a pending breakpoint to bind to it's real address in the target. This allows breakpoints to be set before the process is launched, and the target address of the BP to be discovered when the module loads, prior to the breakpoint being hit.
Patch from chuckr@microsoft.com
Test Plan:
I ran the check-lldb target with and without this patch and saw no change. I am unsure of how to write an MI specific test for this because the new event is buried in module load events. Here is an example (the new event is in bold):
```
(gdb)
-file-exec-and-symbols a.out
^done
(gdb)
=shlibs-added,shlib-info=[num="1",name="a.out",dyld-addr="-",reason="dyld",path="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out",loaded_addr="-",dsym-objpath="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out.dSYM/Contents/Resources/DWARF/a.out"]
-break-insert -f main.cpp:15
^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0xffffffffffffffff",func="main",file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15",pending=["main.cpp:15"],times="0",original-location="main.cpp:15"}
(gdb)
=breakpoint-modified,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0xffffffffffffffff",func="main",file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15",pending=["main.cpp:15"],times="0",original-location="main.cpp:15"}
-exec-run
^running
=thread-group-started,id="i1",pid="75620"
(gdb)
=thread-created,id="1",group-id="i1"
=thread-selected,id="1"
(gdb)
=shlibs-added,shlib-info=[num="2",name="dyld",dyld-addr="0x7fff5fc00000",reason="dyld",path="/usr/lib/dyld",loaded_addr="0x7fff5fc00000"]
(gdb)
=shlibs-added,shlib-info=[num="3",name="dyld",dyld-addr="0x7fff5fc00000",reason="dyld",path="/usr/lib/dyld",loaded_addr="0x7fff5fc00000"]
(gdb)
*running,thread-id="all"
(gdb)
(gdb)
=shlibs-added,shlib-info=[num="4",name="libc++.1.dylib",dyld-addr="0x7fff85dd0000",reason="dyld",path="/usr/lib/libc++.1.dylib",loaded_addr="0x7fff85dd0000"]
(gdb)
=shlibs-added,shlib-info=[num="5",name="libSystem.B.dylib",dyld-addr="0x7fff851ab000",reason="dyld",path="/usr/lib/libSystem.B.dylib",loaded_addr="0x7fff851ab000"]
(gdb)
=shlibs-added,shlib-info=[num="6",name="libc++abi.dylib",dyld-addr="0x7fff81be8000",reason="dyld",path="/usr/lib/libc++abi.dylib",loaded_addr="0x7fff81be8000"]
(gdb)
=shlibs-added,shlib-info=[num="7",name="libcache.dylib",dyld-addr="0x7fff8b975000",reason="dyld",path="/usr/lib/system/libcache.dylib",loaded_addr="0x7fff8b975000"]
(gdb)
=shlibs-added,shlib-info=[num="8",name="libcommonCrypto.dylib",dyld-addr="0x7fff85d14000",reason="dyld",path="/usr/lib/system/libcommonCrypto.dylib",loaded_addr="0x7fff85d14000"]
(gdb)
=shlibs-added,shlib-info=[num="9",name="libcompiler_rt.dylib",dyld-addr="0x7fff86154000",reason="dyld",path="/usr/lib/system/libcompiler_rt.dylib",loaded_addr="0x7fff86154000"]
(gdb)
=shlibs-added,shlib-info=[num="10",name="libcopyfile.dylib",dyld-addr="0x7fff81ac7000",reason="dyld",path="/usr/lib/system/libcopyfile.dylib",loaded_addr="0x7fff81ac7000"]
(gdb)
=shlibs-added,shlib-info=[num="11",name="libcorecrypto.dylib",dyld-addr="0x7fff87d5d000",reason="dyld",path="/usr/lib/system/libcorecrypto.dylib",loaded_addr="0x7fff87d5d000"]
(gdb)
=shlibs-added,shlib-info=[num="12",name="libdispatch.dylib",dyld-addr="0x7fff8ea8c000",reason="dyld",path="/usr/lib/system/libdispatch.dylib",loaded_addr="0x7fff8ea8c000"]
(gdb)
=shlibs-added,shlib-info=[num="13",name="libdyld.dylib",dyld-addr="0x7fff89087000",reason="dyld",path="/usr/lib/system/libdyld.dylib",loaded_addr="0x7fff89087000"]
(gdb)
=shlibs-added,shlib-info=[num="14",name="libkeymgr.dylib",dyld-addr="0x7fff8e818000",reason="dyld",path="/usr/lib/system/libkeymgr.dylib",loaded_addr="0x7fff8e818000"]
(gdb)
=shlibs-added,shlib-info=[num="15",name="liblaunch.dylib",dyld-addr="0x7fff84936000",reason="dyld",path="/usr/lib/system/liblaunch.dylib",loaded_addr="0x7fff84936000"]
(gdb)
=shlibs-added,shlib-info=[num="16",name="libmacho.dylib",dyld-addr="0x7fff8534e000",reason="dyld",path="/usr/lib/system/libmacho.dylib",loaded_addr="0x7fff8534e000"]
(gdb)
=shlibs-added,shlib-info=[num="17",name="libquarantine.dylib",dyld-addr="0x7fff90f97000",reason="dyld",path="/usr/lib/system/libquarantine.dylib",loaded_addr="0x7fff90f97000"]
(gdb)
=shlibs-added,shlib-info=[num="18",name="libremovefile.dylib",dyld-addr="0x7fff8ccb5000",reason="dyld",path="/usr/lib/system/libremovefile.dylib",loaded_addr="0x7fff8ccb5000"]
(gdb)
=shlibs-added,shlib-info=[num="19",name="libsystem_asl.dylib",dyld-addr="0x7fff8df67000",reason="dyld",path="/usr/lib/system/libsystem_asl.dylib",loaded_addr="0x7fff8df67000"]
(gdb)
=shlibs-added,shlib-info=[num="20",name="libsystem_blocks.dylib",dyld-addr="0x7fff8621c000",reason="dyld",path="/usr/lib/system/libsystem_blocks.dylib",loaded_addr="0x7fff8621c000"]
(gdb)
=shlibs-added,shlib-info=[num="21",name="libsystem_c.dylib",dyld-addr="0x7fff83c0f000",reason="dyld",path="/usr/lib/system/libsystem_c.dylib",loaded_addr="0x7fff83c0f000"]
(gdb)
=shlibs-added,shlib-info=[num="22",name="libsystem_configuration.dylib",dyld-addr="0x7fff8fd71000",reason="dyld",path="/usr/lib/system/libsystem_configuration.dylib",loaded_addr="0x7fff8fd71000"]
(gdb)
=shlibs-added,shlib-info=[num="23",name="libsystem_coreservices.dylib",dyld-addr="0x7fff8a028000",reason="dyld",path="/usr/lib/system/libsystem_coreservices.dylib",loaded_addr="0x7fff8a028000"]
(gdb)
=shlibs-added,shlib-info=[num="24",name="libsystem_coretls.dylib",dyld-addr="0x7fff90996000",reason="dyld",path="/usr/lib/system/libsystem_coretls.dylib",loaded_addr="0x7fff90996000"]
(gdb)
=shlibs-added,shlib-info=[num="25",name="libsystem_dnssd.dylib",dyld-addr="0x7fff8b71f000",reason="dyld",path="/usr/lib/system/libsystem_dnssd.dylib",loaded_addr="0x7fff8b71f000"]
(gdb)
=shlibs-added,shlib-info=[num="26",name="libsystem_info.dylib",dyld-addr="0x7fff8b9f2000",reason="dyld",path="/usr/lib/system/libsystem_info.dylib",loaded_addr="0x7fff8b9f2000"]
(gdb)
=shlibs-added,shlib-info=[num="27",name="libsystem_kernel.dylib",dyld-addr="0x7fff81ad0000",reason="dyld",path="/usr/lib/system/libsystem_kernel.dylib",loaded_addr="0x7fff81ad0000"]
(gdb)
=shlibs-added,shlib-info=[num="28",name="libsystem_m.dylib",dyld-addr="0x7fff84953000",reason="dyld",path="/usr/lib/system/libsystem_m.dylib",loaded_addr="0x7fff84953000"]
(gdb)
=shlibs-added,shlib-info=[num="29",name="libsystem_malloc.dylib",dyld-addr="0x7fff887bd000",reason="dyld",path="/usr/lib/system/libsystem_malloc.dylib",loaded_addr="0x7fff887bd000"]
(gdb)
=shlibs-added,shlib-info=[num="30",name="libsystem_network.dylib",dyld-addr="0x7fff88304000",reason="dyld",path="/usr/lib/system/libsystem_network.dylib",loaded_addr="0x7fff88304000"]
(gdb)
=shlibs-added,shlib-info=[num="31",name="libsystem_networkextension.dylib",dyld-addr="0x7fff82085000",reason="dyld",path="/usr/lib/system/libsystem_networkextension.dylib",loaded_addr="0x7fff82085000"]
(gdb)
=shlibs-added,shlib-info=[num="32",name="libsystem_notify.dylib",dyld-addr="0x7fff8eb69000",reason="dyld",path="/usr/lib/system/libsystem_notify.dylib",loaded_addr="0x7fff8eb69000"]
(gdb)
=shlibs-added,shlib-info=[num="33",name="libsystem_platform.dylib",dyld-addr="0x7fff89ac7000",reason="dyld",path="/usr/lib/system/libsystem_platform.dylib",loaded_addr="0x7fff89ac7000"]
(gdb)
=shlibs-added,shlib-info=[num="34",name="libsystem_pthread.dylib",dyld-addr="0x7fff83ff8000",reason="dyld",path="/usr/lib/system/libsystem_pthread.dylib",loaded_addr="0x7fff83ff8000"]
(gdb)
=shlibs-added,shlib-info=[num="35",name="libsystem_sandbox.dylib",dyld-addr="0x7fff89084000",reason="dyld",path="/usr/lib/system/libsystem_sandbox.dylib",loaded_addr="0x7fff89084000"]
(gdb)
=shlibs-added,shlib-info=[num="36",name="libsystem_secinit.dylib",dyld-addr="0x7fff8e816000",reason="dyld",path="/usr/lib/system/libsystem_secinit.dylib",loaded_addr="0x7fff8e816000"]
(gdb)
=shlibs-added,shlib-info=[num="37",name="libsystem_stats.dylib",dyld-addr="0x7fff89eaf000",reason="dyld",path="/usr/lib/system/libsystem_stats.dylib",loaded_addr="0x7fff89eaf000"]
(gdb)
=shlibs-added,shlib-info=[num="38",name="libsystem_trace.dylib",dyld-addr="0x7fff8ead4000",reason="dyld",path="/usr/lib/system/libsystem_trace.dylib",loaded_addr="0x7fff8ead4000"]
(gdb)
=shlibs-added,shlib-info=[num="39",name="libunc.dylib",dyld-addr="0x7fff8ab27000",reason="dyld",path="/usr/lib/system/libunc.dylib",loaded_addr="0x7fff8ab27000"]
(gdb)
=shlibs-added,shlib-info=[num="40",name="libunwind.dylib",dyld-addr="0x7fff85cf3000",reason="dyld",path="/usr/lib/system/libunwind.dylib",loaded_addr="0x7fff85cf3000"]
(gdb)
=shlibs-added,shlib-info=[num="41",name="libxpc.dylib",dyld-addr="0x7fff88896000",reason="dyld",path="/usr/lib/system/libxpc.dylib",loaded_addr="0x7fff88896000"]
(gdb)
=shlibs-added,shlib-info=[num="42",name="libobjc.A.dylib",dyld-addr="0x7fff84f13000",reason="dyld",path="/usr/lib/libobjc.A.dylib",loaded_addr="0x7fff84f13000"]
(gdb)
=shlibs-added,shlib-info=[num="43",name="libauto.dylib",dyld-addr="0x7fff85d89000",reason="dyld",path="/usr/lib/libauto.dylib",loaded_addr="0x7fff85d89000"]
(gdb)
=shlibs-added,shlib-info=[num="44",name="libDiagnosticMessagesClient.dylib",dyld-addr="0x7fff822e1000",reason="dyld",path="/usr/lib/libDiagnosticMessagesClient.dylib",loaded_addr="0x7fff822e1000"]
```
=breakpoint-modified,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x0000000100000f4d",func="main",file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15",pending=["main.cpp:15"],times="0",original-location="main.cpp:15"}
```
(gdb)
=shlibs-added,shlib-info=[num="45",name="a.out",dyld-addr="0x100000000",reason="dyld",path="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out",loaded_addr="0x100000000",dsym-objpath="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out.dSYM/Contents/Resources/DWARF/a.out"]
=shlibs-added,shlib-info=[num="46",name="libc++.1.dylib",dyld-addr="0x7fff85dd0000",reason="dyld",path="/usr/lib/libc++.1.dylib",loaded_addr="0x7fff85dd0000"]
=shlibs-added,shlib-info=[num="47",name="libSystem.B.dylib",dyld-addr="0x7fff851ab000",reason="dyld",path="/usr/lib/libSystem.B.dylib",loaded_addr="0x7fff851ab000"]
=shlibs-added,shlib-info=[num="48",name="libc++abi.dylib",dyld-addr="0x7fff81be8000",reason="dyld",path="/usr/lib/libc++abi.dylib",loaded_addr="0x7fff81be8000"]
=shlibs-added,shlib-info=[num="49",name="libcache.dylib",dyld-addr="0x7fff8b975000",reason="dyld",path="/usr/lib/system/libcache.dylib",loaded_addr="0x7fff8b975000"]
=shlibs-added,shlib-info=[num="50",name="libcommonCrypto.dylib",dyld-addr="0x7fff85d14000",reason="dyld",path="/usr/lib/system/libcommonCrypto.dylib",loaded_addr="0x7fff85d14000"]
=shlibs-added,shlib-info=[num="51",name="libcompiler_rt.dylib",dyld-addr="0x7fff86154000",reason="dyld",path="/usr/lib/system/libcompiler_rt.dylib",loaded_addr="0x7fff86154000"]
=shlibs-added,shlib-info=[num="52",name="libcopyfile.dylib",dyld-addr="0x7fff81ac7000",reason="dyld",path="/usr/lib/system/libcopyfile.dylib",loaded_addr="0x7fff81ac7000"]
=shlibs-added,shlib-info=[num="53",name="libcorecrypto.dylib",dyld-addr="0x7fff87d5d000",reason="dyld",path="/usr/lib/system/libcorecrypto.dylib",loaded_addr="0x7fff87d5d000"]
=shlibs-added,shlib-info=[num="54",name="libdispatch.dylib",dyld-addr="0x7fff8ea8c000",reason="dyld",path="/usr/lib/system/libdispatch.dylib",loaded_addr="0x7fff8ea8c000"]
=shlibs-added,shlib-info=[num="55",name="libdyld.dylib",dyld-addr="0x7fff89087000",reason="dyld",path="/usr/lib/system/libdyld.dylib",loaded_addr="0x7fff89087000"]
=shlibs-added,shlib-info=[num="56",name="libkeymgr.dylib",dyld-addr="0x7fff8e818000",reason="dyld",path="/usr/lib/system/libkeymgr.dylib",loaded_addr="0x7fff8e818000"]
=shlibs-added,shlib-info=[num="57",name="liblaunch.dylib",dyld-addr="0x7fff84936000",reason="dyld",path="/usr/lib/system/liblaunch.dylib",loaded_addr="0x7fff84936000"]
=shlibs-added,shlib-info=[num="58",name="libmacho.dylib",dyld-addr="0x7fff8534e000",reason="dyld",path="/usr/lib/system/libmacho.dylib",loaded_addr="0x7fff8534e000"]
=shlibs-added,shlib-info=[num="59",name="libquarantine.dylib",dyld-addr="0x7fff90f97000",reason="dyld",path="/usr/lib/system/libquarantine.dylib",loaded_addr="0x7fff90f97000"]
=shlibs-added,shlib-info=[num="60",name="libremovefile.dylib",dyld-addr="0x7fff8ccb5000",reason="dyld",path="/usr/lib/system/libremovefile.dylib",loaded_addr="0x7fff8ccb5000"]
=shlibs-added,shlib-info=[num="61",name="libsystem_asl.dylib",dyld-addr="0x7fff8df67000",reason="dyld",path="/usr/lib/system/libsystem_asl.dylib",loaded_addr="0x7fff8df67000"]
=shlibs-added,shlib-info=[num="62",name="libsystem_blocks.dylib",dyld-addr="0x7fff8621c000",reason="dyld",path="/usr/lib/system/libsystem_blocks.dylib",loaded_addr="0x7fff8621c000"]
=shlibs-added,shlib-info=[num="63",name="libsystem_c.dylib",dyld-addr="0x7fff83c0f000",reason="dyld",path="/usr/lib/system/libsystem_c.dylib",loaded_addr="0x7fff83c0f000"]
=shlibs-added,shlib-info=[num="64",name="libsystem_configuration.dylib",dyld-addr="0x7fff8fd71000",reason="dyld",path="/usr/lib/system/libsystem_configuration.dylib",loaded_addr="0x7fff8fd71000"]
=shlibs-added,shlib-info=[num="65",name="libsystem_coreservices.dylib",dyld-addr="0x7fff8a028000",reason="dyld",path="/usr/lib/system/libsystem_coreservices.dylib",loaded_addr="0x7fff8a028000"]
=shlibs-added,shlib-info=[num="66",name="libsystem_coretls.dylib",dyld-addr="0x7fff90996000",reason="dyld",path="/usr/lib/system/libsystem_coretls.dylib",loaded_addr="0x7fff90996000"]
=shlibs-added,shlib-info=[num="67",name="libsystem_dnssd.dylib",dyld-addr="0x7fff8b71f000",reason="dyld",path="/usr/lib/system/libsystem_dnssd.dylib",loaded_addr="0x7fff8b71f000"]
=shlibs-added,shlib-info=[num="68",name="libsystem_info.dylib",dyld-addr="0x7fff8b9f2000",reason="dyld",path="/usr/lib/system/libsystem_info.dylib",loaded_addr="0x7fff8b9f2000"]
=shlibs-added,shlib-info=[num="69",name="libsystem_kernel.dylib",dyld-addr="0x7fff81ad0000",reason="dyld",path="/usr/lib/system/libsystem_kernel.dylib",loaded_addr="0x7fff81ad0000"]
=shlibs-added,shlib-info=[num="70",name="libsystem_m.dylib",dyld-addr="0x7fff84953000",reason="dyld",path="/usr/lib/system/libsystem_m.dylib",loaded_addr="0x7fff84953000"]
=shlibs-added,shlib-info=[num="71",name="libsystem_malloc.dylib",dyld-addr="0x7fff887bd000",reason="dyld",path="/usr/lib/system/libsystem_malloc.dylib",loaded_addr="0x7fff887bd000"]
=shlibs-added,shlib-info=[num="72",name="libsystem_network.dylib",dyld-addr="0x7fff88304000",reason="dyld",path="/usr/lib/system/libsystem_network.dylib",loaded_addr="0x7fff88304000"]
=shlibs-added,shlib-info=[num="73",name="libsystem_networkextension.dylib",dyld-addr="0x7fff82085000",reason="dyld",path="/usr/lib/system/libsystem_networkextension.dylib",loaded_addr="0x7fff82085000"]
=shlibs-added,shlib-info=[num="74",name="libsystem_notify.dylib",dyld-addr="0x7fff8eb69000",reason="dyld",path="/usr/lib/system/libsystem_notify.dylib",loaded_addr="0x7fff8eb69000"]
=shlibs-added,shlib-info=[num="75",name="libsystem_platform.dylib",dyld-addr="0x7fff89ac7000",reason="dyld",path="/usr/lib/system/libsystem_platform.dylib",loaded_addr="0x7fff89ac7000"]
=shlibs-added,shlib-info=[num="76",name="libsystem_pthread.dylib",dyld-addr="0x7fff83ff8000",reason="dyld",path="/usr/lib/system/libsystem_pthread.dylib",loaded_addr="0x7fff83ff8000"]
=shlibs-added,shlib-info=[num="77",name="libsystem_sandbox.dylib",dyld-addr="0x7fff89084000",reason="dyld",path="/usr/lib/system/libsystem_sandbox.dylib",loaded_addr="0x7fff89084000"]
=shlibs-added,shlib-info=[num="78",name="libsystem_secinit.dylib",dyld-addr="0x7fff8e816000",reason="dyld",path="/usr/lib/system/libsystem_secinit.dylib",loaded_addr="0x7fff8e816000"]
=shlibs-added,shlib-info=[num="79",name="libsystem_stats.dylib",dyld-addr="0x7fff89eaf000",reason="dyld",path="/usr/lib/system/libsystem_stats.dylib",loaded_addr="0x7fff89eaf000"]
=shlibs-added,shlib-info=[num="80",name="libsystem_trace.dylib",dyld-addr="0x7fff8ead4000",reason="dyld",path="/usr/lib/system/libsystem_trace.dylib",loaded_addr="0x7fff8ead4000"]
=shlibs-added,shlib-info=[num="81",name="libunc.dylib",dyld-addr="0x7fff8ab27000",reason="dyld",path="/usr/lib/system/libunc.dylib",loaded_addr="0x7fff8ab27000"]
=shlibs-added,shlib-info=[num="82",name="libunwind.dylib",dyld-addr="0x7fff85cf3000",reason="dyld",path="/usr/lib/system/libunwind.dylib",loaded_addr="0x7fff85cf3000"]
=shlibs-added,shlib-info=[num="83",name="libxpc.dylib",dyld-addr="0x7fff88896000",reason="dyld",path="/usr/lib/system/libxpc.dylib",loaded_addr="0x7fff88896000"]
=shlibs-added,shlib-info=[num="84",name="libobjc.A.dylib",dyld-addr="0x7fff84f13000",reason="dyld",path="/usr/lib/libobjc.A.dylib",loaded_addr="0x7fff84f13000"]
=shlibs-added,shlib-info=[num="85",name="libauto.dylib",dyld-addr="0x7fff85d89000",reason="dyld",path="/usr/lib/libauto.dylib",loaded_addr="0x7fff85d89000"]
=shlibs-added,shlib-info=[num="86",name="libDiagnosticMessagesClient.dylib",dyld-addr="0x7fff822e1000",reason="dyld",path="/usr/lib/libDiagnosticMessagesClient.dylib",loaded_addr="0x7fff822e1000"]
(gdb)
*stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x0000000100000f4d",func="main",args=[{name="argc",value="1"},{name="argv",value="0x00007fff5fbffed8"}],file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15"},thread-id="1",stopped-threads="all"
(gdb)
```
Reviewers: abidh, clayborg, ChuckR, jingham
Subscribers: ki.stfu, paulmaybee, lldb-commits
Differential Revision: http://reviews.llvm.org/D8847
llvm-svn: 234483
So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we automatically #include "Logging.h" from
within "Log.h".
llvm-svn: 232653
Debugger.h is a huge file that gets included everywhere, and
FormatManager.h brings in a ton of unnecessary stuff and doesn't
even use anything from it in the header.
llvm-svn: 231161
changing it was in r219544 - after living on that for a few
months, I wanted to take another crack at this.
The disassembly-format setting still exists and the old format
can be user specified with a setting like
${current-pc-arrow}${addr-file-or-load}{ <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>}:
This patch was discussed in http://reviews.llvm.org/D7578
<rdar://problem/19726421>
llvm-svn: 229186
the hit count is not updated.
Also, keep the hit count for the breakpoint in the breakpoint. We were
using just the sum of the location's hit counts, but that was wrong since if a shared library is
unloaded, and the location goes away, the breakpoint hit count should not suddenly drop
by the number of hits there were on that location.
llvm-svn: 226074
names can then be used in place of breakpoint id's or breakpoint id
ranges in all the commands that operate on breakpoints.
<rdar://problem/10103959>
llvm-svn: 224392
in the "dummy-target". The dummy target breakpoints prime all future
targets. Breakpoints set before any target is created (e.g. breakpoints
in ~/.lldbinit) automatically get set in the dummy target. You can also
list, add & delete breakpoints from the dummy target using the "-D" flag,
which is supported by most of the breakpoint commands.
This removes a long-standing wart in lldb...
<rdar://problem/10881487>
llvm-svn: 223565
BreakpointLocation::ShouldStop. That worked but wasn't really right,
since there's nothing to guarantee that won't get called more than
once. So this change moves that responsibility to the StopInfoBreakpoint
directly, and then it uses the BreakpointSite to actually do the bumping.
Also fix a test case that was assuming if you had many threads running some
code with a breakpoint in it, the hit count when you stopped would always be
1. Many of the threads could have hit it at the same time...
<rdar://problem/18577603>
llvm-svn: 220358
output style can be customized. Change the built-in default to be
more similar to gdb's disassembly formatting.
The disassembly-format for a gdb-like output is
${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>:
The disassembly-format for the lldb style output is
{${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}:
The two backticks in the lldb style formatter triggers the sub-expression evaluation in
CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to
use ' characters instead of ` would work around that.
<rdar://problem/9885398>
llvm-svn: 219544
Add a callback that will allow an expression to be cancelled between the
expression evaluation stages (for the ClangUserExpressions.)
<rdar://problem/16790467>, <rdar://problem/16573440>
llvm-svn: 207944
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
Fix use of std::lower_bound to check for equality if a match is found to ensure we don't return the next breakpoint with an ID greater than the break_id that was asked for.
llvm-svn: 196298
It completes the job of using EvaluateExpressionOptions consistently throughout
the inferior function calling mechanism in lldb begun in Greg's patch r194009.
It removes a handful of alternate calls into the ClangUserExpression/ClangFunction/ThreadPlanCallFunction which
were there for convenience. Using the EvaluateExpressionOptions removes the need for them.
Using that it gets the --debug option from Greg's patch to work cleanly.
It also adds another EvaluateExpressionOption to not trap exceptions when running expressions. You shouldn't
use this option unless you KNOW your expression can't throw beyond itself. This is:
<rdar://problem/15374885>
At present this is only available through the SB API's or python.
It fixes a bug where function calls would unset the ObjC & C++ exception breakpoints without checking whether
they were set by somebody else already.
llvm-svn: 194182
Fixed the test case for "test/functionalities/exec/TestExec.py" on Darwin.
The issue was breakpoints were persisting and causing problems. When we exec, we need to clear out the process and target and start fresh with nothing and let the breakpoints populate themselves again. This patch correctly clears out the breakpoints and also flushes the process so that the objects (process/thread/frame) give out valid information.
llvm-svn: 194106
Cleaned up ClangUserExpression::Evaluate() to have only one variant that takes a "const EvaluateExpressionOptions& options" instead of taking many arguments.
The "--debug" option is designed to allow you to debug your expression by stopping at the first instruction (it enables --ignore-breakpoints=true and --unwind-on-error=false) and allowing you to step through your JIT code. It needs to be more integrated with the thread plan, so I am checking this in so Jim Ingham can make it happen.
llvm-svn: 194009
Added a way to set hardware breakpoints from the "breakpoint set" command with the new "--hardware" option. Hardware breakpoints are not a request, they currently are a requirement. So when breakpoints are specified as hardware breakpoints, they might fail to be set when they are able to be resolved and should be used sparingly. This is currently hooked up for GDB remote debugging.
Linux and FreeBSD should quickly enable this feature if possible, or return an error for any breakpoints that are hardware breakpoint sites in the "virtual Error Process::EnableBreakpointSite (BreakpointSite *bp_site);" function.
llvm-svn: 192491
line breakpoints past the prologue of functions so it can be shared between the
file & line breakpoint resolver, and the source pattern breakpoint resolver,
and then share it.
llvm-svn: 191478
"coalesce the line ranges for a file & line breakpoint to the first range in each block". We were still setting a silly number
of independent breakpoints sometimes, and until we get a compiler that emits trustworthy is_stmt flags in the line table, we
need to do something to reduce the noise.
<rdar://problem/14920404>
llvm-svn: 190380
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
and any breakpoints with section relative addresses won't resolve their load addresses so they will error out at that point.
<rdar://problem/13900130>
llvm-svn: 185170
doesn't return anything; that's great.
We should probably also return rather than
trying to access the nonexistent return value.
<rdar://problem/14009519>
llvm-svn: 184765
325,000 breakpoints for running "breakpoint set --func-regex ." on lldb itself (after hitting a breakpoint at main so that LLDB.framework is loaded) used to take up to an hour to set, now we are down under a minute. With warm file caches, we are at 40 seconds, and that is with setting 325,000 breakpoint through the GDB remote API. Linux and the native debuggers might be faster. I haven't timed what how much is debug info parsing and how much is the protocol traffic to/from GDB remote.
That there were many performance issues. Most of them were due to storing breakpoints in the wrong data structures, or using the wrong iterators to traverse the lists, traversing the lists in inefficient ways, and not optimizing certain function name lookups/symbol merges correctly.
Debugging after that is also now very efficient. There were issues with replacing the breakpoint opcodes in memory that was read, and those routines were also fixed.
llvm-svn: 183820
condition in two different processes (with the
same target) could cause crashes. Now the breakpoint
condition is always evaluated (and possibly parsed)
by one thread at a time.
<rdar://problem/14083737>
llvm-svn: 183440
Previously, the options for a breakopint or its
locations stored only the text of the breakpoint
condition (ironically, they used ClangUserExpression
as a glorified std::string) and, each time the condition
had to be evaluated in the StopInfo code, the expression
parser would be invoked via a static method to parse and
then execute the expression.
I made several changes here:
- Each breakpoint location now has its own
ClangUserExpressionSP containing a version of
the breakpoint expression compiled for that exact
location.
- Whenever the breakpoint is hit, the breakpoint
condition expression is simply re-run to determine
whether to stop.
- If the process changes (e.g., it's re-run) or
the source code of the expression changes (we use
a hash so as to avoid doing string comparisons)
the ClangUserExpressionSP is re-generated.
This should improve performance of breakpoint
conditions significantly, and takes advantage of
the recent expression re-use work.
llvm-svn: 179838
Symbol table function names should support lookups like symbols with debug info.
To fix this I:
- Gutted the way FindFunctions is used, there used to be way too much smarts only in the DWARF plug-in
- Made it more efficient by chopping the name up once and using simpler queries so that SymbolFile and Symtab plug-ins don't need to do as much
- Filter the results at a higher level
- Make the lldb_private::Symtab able to chop up C++ mangled names and make as much sense out of them as possible and also be able to search by basename, fullname, method name, and selector name.
llvm-svn: 178608
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
Cleaned up the objective C name parsing code to use a class.
Now breakpoints that are set by name that are objective C methods without the leading '+' or '-' will resolve. We do this by expanding all the objective C names for a given string. For example:
(lldb) b [MyString cStringUsingEncoding:]
Will set a breakpoint with multiple possible names:
-[MyString cStringUsingEncoding:]
+[MyString cStringUsingEncoding:]
Also if you have a category, it will strip the category and set a breakpoint in all variants:
(lldb) [MyString(my_category) cStringUsingEncoding:]
Will resolve to the following names:
-[MyString(my_category) cStringUsingEncoding:]
+[MyString(my_category) cStringUsingEncoding:]
-[MyString cStringUsingEncoding:]
+[MyString cStringUsingEncoding:]
Likewise when we have:
(lldb) b -[MyString(my_category) cStringUsingEncoding:]
It will resolve to two names:
-[MyString(my_category) cStringUsingEncoding:]
-[MyString cStringUsingEncoding:]
llvm-svn: 173858
Add the ability to give breakpoints a "kind" string, and have the StopInfoBreakpoint
print that in the brief description if set. Also print the kind - if set - in the breakpoint
listing.
Give kinds to a bunch of the internal breakpoints.
We were deleting the Mac OS X dynamic loader breakpoint as though the id we had stored away was
a breakpoint site ID, but in fact it was a breakpoint id, so we never actually deleted it. Fixed that.
llvm-svn: 173555
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
Setting breakpoints using "breakpoint set --selector <SEL>" previously didn't when there was no dSYM file.
Also fixed issues in the test suite that arose after fixing the bug.
Also fixed the log channels to properly ref count the log streams using weak pointers to the streams. This fixes a test suite problem that would happen when you specified a full path to the compiler with the "--compiler" option.
llvm-svn: 171816
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
it to print the old and new values.
Temporarily disable the "out of scope" checking since it didn't work correctly, and was
not what people generally expected watchpoints to be doing.
llvm-svn: 166472
enabled after we'd found a few bugs that were caused by shadowed
local variables; the most important issue this turned up was
a common mistake of trying to obtain a mutex lock for the scope
of a code block by doing
Mutex::Locker(m_map_mutex);
This doesn't assign the lock object to a local variable; it is
a temporary that has its dtor called immediately. Instead,
Mutex::Locker locker(m_map_mutex);
does what is intended. For some reason -Wshadow happened to
highlight these as shadowed variables.
I also fixed a few obivous and easy shadowed variable issues
across the code base but there are a couple dozen more that
should be fixed when someone has a free minute.
<rdar://problem/12437585>
llvm-svn: 165269
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
Previously we put a WatchpointSentry object within StopInfo.cpp to disable-and-then-enable the watchpoint itself
while we are performing the actions associated with the triggered watchpoint, which can cause the user-initiated
watchpoint disabling action to be negated.
Add a test case to verify that a watchpoint can be disabled during the callbacks.
llvm-svn: 162483
Watchpoint conditions were hitting watchpoint, smashing LLDB's stack.
Make sure watchpoint is properly disabled and subsequently enabled while performing watchpoint actions.
llvm-svn: 162322
do not take the sanpshot and forget about the stop info. It is possible that the variable expression has gone
out of scope, we'll revise the hit count due to the false alarms.
llvm-svn: 161892
Record the snapshot of our watched value when the watchpoint is set or hit.
And report the old/new values when watchpoint is triggered. Add some test scenarios.
llvm-svn: 161785
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load notification, and start removing modules from
the list. This change adds a GetMutex accessor to the ModuleList class, and
uses it whenever we are accessing the target's ModuleList (as returned by GetImages().)
<rdar://problem/11552372>
llvm-svn: 157668
Mohit K. Bhakkad