Type identifiers are exported by:
- Adding coarse-grained information about how to test the type
identifier to the summary.
- Creating symbols in the object file (aliases and absolute symbols)
containing fine-grained information about the type identifier.
Differential Revision: https://reviews.llvm.org/D28424
llvm-svn: 292462
This changes the vectorizer to explicitly use the loopsimplify and lcssa utils,
instead of "requiring" the transformations as if they were analyses.
This is not NFC, since it changes the LCSSA behavior - we no longer run LCSSA
for all loops, but rather only for the loops we expect to modify.
Differential Revision: https://reviews.llvm.org/D28868
llvm-svn: 292456
Mostly straightforward changes; we just didn't do the computation before.
One sort of interesting change in LoopUnroll.cpp: we weren't handling
dominance for children of the loop latch correctly, but
foldBlockIntoPredecessor hid the problem for complete unrolling.
Currently punting on loop peeling; made some minor changes to isolate
that problem to LoopUnrollPeel.cpp.
Adds a flag -unroll-verify-domtree; it verifies the domtree immediately
after we finish updating it. This is on by default for +Asserts builds.
Differential Revision: https://reviews.llvm.org/D28073
llvm-svn: 292447
We currently check whether a reduction has a single outside user. We don't
really need to require that - we just need to make sure a single value is
used externally. The number of external users of that value shouldn't actually
matter.
Differential Revision: https://reviews.llvm.org/D28830
llvm-svn: 292424
As discussed on D28777 - we don't need to handle 'all element' shuffles inside InstCombiner::visitCallInst as InstCombiner::SimplifyDemandedVectorElts will do everything we need.
llvm-svn: 292365
Summary: Partial unrolling should have separate threshold with full unrolling.
Reviewers: efriedma, mzolotukhin
Reviewed By: efriedma, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28831
llvm-svn: 292293
unique exit block if available rather than rolling it ourselves.
This is a little disappointing because that helper doesn't do anything
clever to short-circuit the (surprisingly expensive) computation of all
exit blocks. What's worse is that the way we compute this is hopelessly,
hilariously inefficient. We're literally computing the same information
two different ways and multiple times each way:
- hasDedicatedExits computes the exit block set and then looks at the
predecessors of each
- getExitingBlocks computes the set of loop blocks which have exiting
successors
- getUniqueExitBlock(s) computes the set of non-loop blocks reached from
loop blocks (sound familiar?)
Anyways, at some point we should clean all of this up in the LoopInfo
API, but for now just simplifying the user I'm about to touch.
llvm-svn: 292282
I hope that for any code, it is changed only with good reason and only
when the author knows what they are doing...
There is of course good reason to comment here about the subtlety of the
process, and I've left that comment in tact.
llvm-svn: 292275
instead of members.
No state was being provided by the object so this seems strictly
simpler.
I've also tried to improve the name and comments for the functions to
more thoroughly document what they are doing.
llvm-svn: 292274
that we know has exactly one element when all we are going to do is get
that one element out of it.
Instead, pass around that one element.
There are more simplifications to come in this code...
llvm-svn: 292273
If a memory instruction will be vectorized, but it's pointer operand is
non-consecutive-like, the instruction is a gather or scatter operation. Its
pointer operand will be non-uniform. This should fix PR31671.
Reference: https://llvm.org/bugs/show_bug.cgi?id=31671
Differential Revision: https://reviews.llvm.org/D28819
llvm-svn: 292254
Add missing fabs(fpext) optimzation that worked with the call,
and also fixes it creating a second fpext when there were multiple
uses.
llvm-svn: 292172
It's not clear what 'First' and 'Second' mean, so use 'Inner' and 'Outer'
to match foldShiftedShift() and add comments with formulas, so it's easier
to see what's going on.
llvm-svn: 292153
Simplify a pshufb shuffle mask based on the elements of the mask that are actually demanded.
Differential Revision: https://reviews.llvm.org/D28745
llvm-svn: 292101
a function's CFG when that CFG is unchanged.
This allows transformation passes to simply claim they preserve the CFG
and analysis passes to check for the CFG being preserved to remove the
fanout of all analyses being listed in all passes.
I've gone through and removed or cleaned up as many of the comments
reminding us to do this as I could.
Differential Revision: https://reviews.llvm.org/D28627
llvm-svn: 292054
mark it as never invalidated in the new PM.
The old PM already required this to work, and after a discussion with
Hal this seems to really be the only sensible answer. The cache
gracefully degrades as the IR is mutated, and most things which do this
should already be incrementally updating the cache.
This gets rid of a bunch of logic preserving and testing the
invalidation of this analysis.
llvm-svn: 292039
cover domtree and alias analysis. These are the pretty clear analyses
that we would always want to survive this pass.
To make these survive, we also need to preserve the assumption cache.
Added a test that verifies the important bits of this preservation.
llvm-svn: 292037
Allows LLVM to optimize sequences like the following:
%add = add nuw i32 %x, 1
%cmp = icmp ugt i32 %add, %y
Into:
%cmp = icmp uge i32 %x, %y
Previously, only signed comparisons were being handled.
Decrements could also be handled, but 'sub nuw %x, 1' is currently canonicalized to
'add %x, -1' in InstCombineAddSub, losing the nuw flag. Removing that canonicalization
seems like it might have far-reaching ramifications so I kept this simple for now.
Patch by Matti Niemenmaa!
Differential Revision: https://reviews.llvm.org/D24700
llvm-svn: 291975
Summary:
This is a testcase where phi node cycling happens, and because we do
not order the leaders by domination or anything similar, the leader
keeps changing.
Using std::set for the members is too expensive, and we actually don't
need them sorted all the time, only at leader changes.
We could keep both a set and a vector, and keep them mostly sorted and
resort as necessary, or use a set and a fibheap, but all of this seems
premature.
After running some statistics, we are able to avoid the vast majority
of sorting by keeping a "next leader" field. Most congruence classes only have
leader changes once or twice during GVN.
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28594
llvm-svn: 291968
Other than on COFF with incremental linking, global metadata should
not need any extra alignment.
Differential Revision: https://reviews.llvm.org/D28628
llvm-svn: 291859
Summary:
We can sometimes end up with multiple copies of a local function that
have the same GUID in the index. This happens when there are local
functions with the same name that are in different source files with the
same name (but in different directories), and they were compiled in
their own directory so had the same path at compile time.
In this case make sure we import the copy in the caller's module. While
it isn't a correctness problem (the renamed reference which is based on the
module IR hash will be unique since the module must have had an
externally visible function that was imported), importing the wrong copy
will result in lost performance opportunity since it won't be referenced
and inlined.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28440
llvm-svn: 291841
It was always zero. When we move a store from `initial` to its
own congruency class, we end up with a negative store count, which
is obviously wrong.
Also, while here, change StoreCount to be signed so that the assertions
actually fire.
Ack'ed by Daniel Berlin.
llvm-svn: 291725
When using profiling and ASan together (-fprofile-instr-generate -fcoverage-mapping -fsanitize=address), at least on Darwin, the section of globals that ASan emits (__asan_globals) is misaligned and starts at an odd offset. This really doesn't have anything to do with profiling, but it triggers the issue because profiling emits a string section, which can have arbitrary size. This patch changes the alignment to sizeof(GlobalStruct).
Differential Revision: https://reviews.llvm.org/D28573
llvm-svn: 291715
This means that we can use a shorter instruction sequence in the case where
the size is a power of two and on the boundary between two representations.
Differential Revision: https://reviews.llvm.org/D28421
llvm-svn: 291706
classes, and updating checking to allow for equivalence through
reachability.
(Sadly, the checking here is not perfect, and can't be made perfect,
so we'll have to disable it after we are satisfied with correctness.
Right now it is just "very unlikely" to happen.)
llvm-svn: 291698
The removed assert seems bogus - it's perfectly legal for the roots of the
vectorized subtrees to be equal even if the original scalar values aren't,
if the original scalars happen to be equivalent.
This fixes PR31599.
Differential Revision: https://reviews.llvm.org/D28539
llvm-svn: 291692
Summary:
Revert LowerTypeTests: Split the pass in two: a resolution phase and a lowering phase.
This change separates how type identifiers are resolved from how intrinsic
calls are lowered. All information required to lower an intrinsic call
is stored in a new TypeIdLowering data structure. The idea is that this
data structure can either be initialized using the module itself during
regular LTO, or using the module summary in ThinLTO backends.
Original URL: https://reviews.llvm.org/D28341
Reviewers: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D28532
llvm-svn: 291684
Here's my second try at making @llvm.assume processing more efficient. My
previous attempt, which leveraged operand bundles, r289755, didn't end up
working: it did make assume processing more efficient but eliminating the
assumption cache made ephemeral value computation too expensive. This is a
more-targeted change. We'll keep the assumption cache, but extend it to keep a
map of affected values (i.e. values about which an assumption might provide
some information) to the corresponding assumption intrinsics. This allows
ValueTracking and LVI to find assumptions relevant to the value being queried
without scanning all assumptions in the function. The fact that ValueTracking
started doing O(number of assumptions in the function) work, for every
known-bits query, has become prohibitively expensive in some cases.
As discussed during the review, this is a pragmatic fix that, longer term, will
likely be replaced by a more-principled solution (perhaps based on an extended
SSA form).
Differential Revision: https://reviews.llvm.org/D28459
llvm-svn: 291671
the latter to the Transforms library.
While the loop PM uses an analysis to form the IR units, the current
plan is to have the PM itself establish and enforce both loop simplified
form and LCSSA. This would be a layering violation in the analysis
library.
Fundamentally, the idea behind the loop PM is to *transform* loops in
addition to running passes over them, so it really seemed like the most
natural place to sink this was into the transforms library.
We can't just move *everything* because we also have loop analyses that
rely on a subset of the invariants. So this patch splits the the loop
infrastructure into the analysis management that has to be part of the
analysis library, and the transform-aware pass manager.
This also required splitting the loop analyses' printer passes out to
the transforms library, which makes sense to me as running these will
transform the code into LCSSA in theory.
I haven't split the unittest though because testing one component
without the other seems nearly intractable.
Differential Revision: https://reviews.llvm.org/D28452
llvm-svn: 291662
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
llvm-svn: 291657
arguments much like the CGSCC pass manager.
This is a major redesign following the pattern establish for the CGSCC layer to
support updates to the set of loops during the traversal of the loop nest and
to support invalidation of analyses.
An additional significant burden in the loop PM is that so many passes require
access to a large number of function analyses. Manually ensuring these are
cached, available, and preserved has been a long-standing burden in LLVM even
with the help of the automatic scheduling in the old pass manager. And it made
the new pass manager extremely unweildy. With this design, we can package the
common analyses up while in a function pass and make them immediately available
to all the loop passes. While in some cases this is unnecessary, I think the
simplicity afforded is worth it.
This does not (yet) address loop simplified form or LCSSA form, but those are
the next things on my radar and I have a clear plan for them.
While the patch is very large, most of it is either mechanically updating loop
passes to the new API or the new testing for the loop PM. The code for it is
reasonably compact.
I have not yet updated all of the loop passes to correctly leverage the update
mechanisms demonstrated in the unittests. I'll do that in follow-up patches
along with improved FileCheck tests for those passes that ensure things work in
more realistic scenarios. In many cases, there isn't much we can do with these
until the loop simplified form and LCSSA form are in place.
Differential Revision: https://reviews.llvm.org/D28292
llvm-svn: 291651
These are interesting again because the user may not be aware that this
is a common reason preventing LICM.
A const is removed from an instruction pointer declaration in order to
pass it to ORE.
Differential Revision: https://reviews.llvm.org/D27940
llvm-svn: 291649
This patch reverts r291588: [PGO] Turn off comdat renaming in IR PGO by default,
as we are seeing some hash mismatches in our internal tests.
llvm-svn: 291621
Some of the callers are artificially limiting this transform to integer types;
this should make it easier to incrementally remove that restriction.
llvm-svn: 291620
Summary:
This fixes Transforms/LoopUnroll/runtime-loop3.ll which failed with
EXTENSIVE_DEBUG, because the cloned basic blocks were not added to the
correct sub-loops in LoopUnrollRuntime.cpp.
Reviewers: dexonsmith, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28482
llvm-svn: 291619
Move the code to update LoopInfo for cloned basic blocks to
addClonedBlockToLoopInfo, as suggested in
https://reviews.llvm.org/D28482.
llvm-svn: 291614
Bail out instead of asserting when we encounter this situation,
which can actually happen.
The reason the test uses the new PM is that the "bad" phi, incidentally, gets
cleaned up by LoopSimplify. But LICM can create this kind of phi and preserve
loop simplify form, so the cleanup has no chance to run.
This fixes PR31190.
We may want to solve this in a less conservative manner, since this phi is
actually uniform within the inner loop (or we may want LICM to output a cleaner
promotion to begin with).
Differential Revision: https://reviews.llvm.org/D28490
llvm-svn: 291589
Summary:
In IR PGO we append the function hash to comdat functions to avoid the
potential hash mismatch. This turns out not legal in some cases: if the comdat
function is address-taken and used in comparison. Renaming changes the semantic.
This patch turns off comdat renaming by default.
To alleviate the hash mismatch issue, we now rename the profile variable
for comdat functions. Profile allows co-existing multiple versions of profiles
with different hash value. The inlined copy will always has the correct profile
counter. The out-of-line copy might not have the correct count. But we will
not have the bogus mismatch warning.
Reviewers: davidxl
Subscribers: llvm-commits, xur
Differential Revision: https://reviews.llvm.org/D28416
llvm-svn: 291588
Sanjay Patel