This was a bit tricky, especially for things like
OptionValueArray and OptionValueDictionary since they do some
funky string parsing. Rather than try to re-write line-by-line
I tried to make the StringRef usage idiomatic, even though
it meant often re-writing from scratch large blocks of code
in a different way while keeping true to the original intent.
The finished code is a big improvement though, and often much
shorter than the original code. All tests and unit tests
pass on Windows and Linux.
llvm-svn: 287242
Also significantly reduced the indentation level by use of
early returns, and simplified some of the logic by using
StringRef functions such as consumeInteger() and getAsInteger()
instead of strtoll, etc.
llvm-svn: 287189
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
Summary:
All usages have been replaced by appropriate std::chrono funcionality, and the
class is now unused. The only used part of the cpp file is the DumpTimePoint
function, which I have moved into the only caller (CommandObjectTarget.cpp).
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26451
llvm-svn: 287096
Summary:
Similar to SBStructuredData's Impl class, SBBreakpointListImpl was
getting weak-link exported in the lldb namespace. This change list fixes
that by moving out of the lldb public namespace, which removes it from
public export visibility.
Fixes:
rdar://28960344
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26553
llvm-svn: 286631
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Summary:
This change fixes an issue where I was leaking a weakly-linked symbol in
the SBAPI. It also updates the docs to call out what I did wrong.
Fixes:
rdar://28882483
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26470
llvm-svn: 286413
Summary:
The only interesting part here is that TimePoint and TimeValue have different
natural string representations, which affects "target modules list" output. It
is now "2016-07-09 04:02:21.000000000", whereas previously in was
"Sat Jul 9 04:02:21 2016". I wanted to check if we're OK with that.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26275
llvm-svn: 286349
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This makes the logic easier to follow and also propagates
StringRef up to the API boundary, which is necessary for
making higher up StringRef API changes.
Differential Revision: https://reviews.llvm.org/D26325
llvm-svn: 286204
Summary:
While removing TimeValue from this class I noticed a lot of room for small
simplifications here. Main are:
- instead of complicated start-stop dances to compute own time, each Timer
just starts the timer once, and keeps track of the durations of child
timers. Then the own time can be computed at the end by subtracting the two
values.
- remove double accounting in TimerStack - the stack object already knows the
number of timers.
The interface does not lend itself well to unit testing, but I have added a
couple of tests which can (and did) catch any obvious errors.
Reviewers: tberghammer, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26243
llvm-svn: 285890
Summary:
This patch allows the Darwin build to fall back to to Posix-style lookups for the clang resource directory if the debugger library isn't inside a framework.
The patch also includes a bit of refactoring and cleanup around the *nix resolution of the binary and lib directories to reuse the code instead of duplicating it.
With this patch Darwin builds that don't build a framework only have 3 failing tests on my system (TestExec.py).
Reviewers: zturner, labath, spyffe, tfiala
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26170
llvm-svn: 285838
We don't have a good story for what happens to watchpoints when you don't
have a process, or if your process exits. Clearing that up will instruct
how to fix this for real.
Also added a test to make sure disable->enable works as well.
This resolves llvm.org/pr30789.
llvm-svn: 285742
Implement the C++ type lookup support in terms of this general scavenger
The idea is that we may want other languages to do debug info based search (exclusively, or as an add-on to runtime/module based searching) and it makes sense to avoid duplicating this functionality
llvm-svn: 285727
Summary:
The only usage there was in GetModificationTime(). I also took the opportunity
to move this function from FileSpec to the FileSystem class - since we are
using FileSpecs to also represent remote files for which we cannot (easily)
retrieve modification time, it makes sense to make the decision to get the
modification time more explicit.
The new function returns a llvm::sys::TimePoint<>. To aid the transition
from TimeValue, I have added a constructor to it which enables implicit
conversion from a time_point.
Reviewers: zturner, clayborg
Subscribers: mehdi_amini, tberghammer, danalbert, beanz, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D25392
llvm-svn: 285702
Summary:
.. handling for windows path was completely broken because the function was
expecting \ as path separators, but we were passing it normalized file paths,
where these have been replaced by forward slashes. Apart from this, the function
was incorrect for posix paths as well in some corner cases, as well as being
generally hard to follow.
The corner cases were:
- /../bar -> should be same as /bar
- /bar/.. -> should be same as / (slightly dodgy as the former depends on /bar actually
existing, but since we're doing it in an abstract way, I think the
transformation is reasonable)
I rewrite the function to fix these corner cases and handle windows paths more
correctly. The function should now handle the posix paths (modulo symlinks, but
we cannot really do anything about that without a real filesystem). For windows
paths, there are a couple of corner cases left, mostly to do with drive letter
handling, which cannot be fixed until the rest of the class understands drive
letters better.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26081
llvm-svn: 285593
Summary:
it was added back in 2013, but there are no uses of it. I started refactoring
it, but then it occured to me it would better to delete it.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25393
llvm-svn: 284599
StringRef is passed through all of these APIs but never actually
used. Just remove it from the API for now and if people want to use it
they can add it back.
llvm-svn: 284362
plan generator.
Fix a small bug in EmulateInstructionARM64::GetFramePointerRegister
which was returning the stack pointer reg instead of fp, prevented
the unwinder from recognizing the switch to using the fp in a
function. (<rdar://problem/28663117>)
Add a new eContextRestoreStackPointer context hint so that the arm64
emulator can flag when the frame pointer value is copied back in to
the stack pointer and that should be used to compute the canonical
frame address again in an epilogue sequence. (<rdar://problem/28704862>)
Small changes to UnwindAssemblyInstEmulation to have a method we can
call without a live process/thread/etc for unit tests.
<rdar://problem/28663117>
<rdar://problem/28704862>
<rdar://problem/28509178>
llvm-svn: 283847
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
There were a number of issues with the Args class preventing
efficient use of strings and incoporating LLVM's StringRef class.
The two biggest were:
1. Backing memory stored in a std::string, so we would frequently
have to use const_cast to get a mutable buffer for passing to
various low level APIs.
2. backing std::strings stored in a std::list, which doesn't
provide random access.
I wanted to solve these two issues so that we could provide
StringRef access to the underlying arguments, and also a way
to provide range-based access to the underlying argument array
while still providing convenient c-style access via an argv style
const char**.
The solution here is to store arguments in a single "entry" class
which contains the backing memory, a StringRef with precomputed
length, and the quote char. The backing memory is a manually
allocated const char* so that it is not invalidated when the
container is resized, and there is a separate argv array provided
for c-style access.
Differential revision: https://reviews.llvm.org/D25099
llvm-svn: 283157
Summary:
This is a register context converter from Minidump to Linux reg context.
This knows the layout of the register context in the Minidump file
(which is the same as in Windows FYI) and as a result emits a binary data
buffer that matches the Linux register context binary layout.
This way we can reuse the existing RegisterContextLinux_x86_64 and
RegisterContextCorePOSIX_x86_64 classes.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D24919
llvm-svn: 282529
This allows debugging of the JIT and other analyses of the internals of the
expression parser. I've also added a testcase that verifies that the setting
works correctly when off and on.
llvm-svn: 282434
CommandData breakpoint commands didn't know whether they were
Python or Command line commands, so they couldn't serialize &
deserialize themselves properly. Fix that.
I also changed the "breakpoint list" command to note in the output
when the commands are Python commands. Fortunately only one test
was relying on this explicit bit of text output.
llvm-svn: 282432
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
Serialize breakpoint names & the hardware_requested attributes.
Also added a few missing affordances to SBBreakpoint whose absence
writing the tests pointed out.
<rdar://problem/12611863>
llvm-svn: 282036
This converts Args::Unshift, Args::AddOrReplaceEnvironmentVariable,
and Args::ContainsEnvironmentVariable to use StringRefs. The code
is also simplified somewhat as a result.
llvm-svn: 281942
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
Where possible, remove the const char* version. To keep the
risk and impact here minimal, I've only done the simplest
functions.
In the process, I found a few opportunities for adding some
unit tests, so I added those as well.
Tested on Windows, Linux, and OSX.
llvm-svn: 281799
This makes the code easier to grok, and since this is a very low
level function it also is very helpful to have this take a StringRef
since it means anyone higher up the chain who has a StringRef would
have to first convert it to a null-terminated string. This way it
can work equally well with StringRefs or const char*'s, which will
enable the conversion of higher up functions to StringRef.
Tested on Windows, Linux, and OSX and saw no regressions.
llvm-svn: 281642
Moved the guts of the code from CommandObjectBreakpoint to Target (should
have done it that way in the first place.) Added an SBBreakpointList class
so there's a way to specify which breakpoints to serialize and to report the
deserialized breakpoints.
<rdar://problem/12611863>
llvm-svn: 281520
I'm was trying to do some cleanup and code modernization and in
doing so I needed to change ParseMachCPUDashSubtypeTriple to take
a StringRef. To ensure I don't break anything, I'm adding some
unit tests for this function. As a side benefit, this also expands
test coverage of this function to all platforms, since in general
this code would rarely be exercised on non Mac platforms, and never
in the test suite.
llvm-svn: 281387
Plumb unique_ptrs<> all the way through the baton interface.
NFC, this is a minor improvement to remove the possibility of an
accidental pointer ownership issue.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D24495
llvm-svn: 281360
Still to come:
1) SB API's
2) Testcases
3) Loose ends:
a) serialize Thread options
b) serialize Exception resolvers
4) "break list --file" should list breakpoints contained in a file and
"break read -f 1 3 5" should then read in only those breakpoints.
<rdar://problem/12611863>
llvm-svn: 281273
The class is only used in the debugserver. The rest of lldb has the StringExtractor class.
Xcode project will need to be updated after this.
llvm-svn: 281226
Summary:
- Added an API to public interface that provides permissions (RWX) of
individual sections of an object file
- Earlier, there was no way to find out this information through SB
APIs
- A possible use case of this API is:
when a user wants to know the sections that have executable machine
instructions and want to write a tool on top of LLDB based on this
information
- Differential Revision: https://reviews.llvm.org/D24251
llvm-svn: 280924
Summary:
This adds the jModulesInfo packet, which is the equivalent of qModulesInfo, but it enables us to
query multiple modules at once. This makes a significant speed improvement in case the
application has many (over a hundred) modules, and the communication link has a non-negligible
latency. This functionality is accessed by ProcessGdbRemote::PrefetchModuleSpecs(), which does
the caching. GetModuleSpecs() is modified to first consult the cache before asking the remote
stub. PrefetchModuleSpecs is currently only called from POSIX-DYLD dynamic loader plugin, after
it reads the list of modules from the inferior memory, but other uses are possible.
This decreases the attach time to an android application by about 40%.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits, danalbert
Differential Revision: https://reviews.llvm.org/D24236
llvm-svn: 280919
mode in lldb works. I've been discussing this with Jim Ingham,
Greg Clayton, and Kate Stone for the past week or two.
Previously lldb would print three source lines (centered on the
line table entry line for the current line) followed by the assembly.
It would print the context information (module`function + offset)
before those three lines of source.
Now lldb will print up to two lines before/after the line table
entry. It prints two '*' characters for the line table line to
make it clear what line is showing assembly. There is one line of
whitespace before/after the source lines so the separation between
source & assembly is clearer. I don't print the context line
(module`function + offset). I stop printing context lines if it's
a different line table entry, or if it's a source line I've already
printed as context to another source line. If I have two line table
entries one after another for the same source line (I get these often
with clang - with different column information in them), I only print
the source line once.
I'm also using the target.process.thread.step-avoid-regexp setting
(which keeps you from stepping into STL functions that have been inlined
into your own code) and avoid printing any source lines from functions
that match that regexp.
When lldb disassembles into a new function, it will try to find the
declaration line # for the function and print all of the source lines
between the decl and the first line table entry (usually a { curly brace)
so we have a good chance of including the arguments, at least with the
debug info emitted by clang.
Finally, the # of source lines of context to show has been separated
from whether we're doing mixed source & assembly or not. Previously
specifying 0 lines of context would turn off mixed source & assembly.
I think there's room for improvement, and maybe some bugs I haven't
found yet, but it's in good enough shape to upstream and iterate at
this point.
I'm not sure how best to indicate which source line is the actual line
table # versus context lines. I'm using '**' right now. Both Kate
and Greg had the initial idea to reuse '->' (normally used to indicate
"currently executing source line") - I tried it but I wasn't thrilled,
I'm too used to the established meaning of ->.
Greg had the interesting idea of avoiding context source lines only
in two line table entries in the same source file. So we'd print
two lines before & after a source line, and then the next line table
entry (if it was on the next source line after those two context lines)
we'd display only the following two lines -- the previous two had just
been printed. If an inline source line was printed between these two,
though, we'd print the context lines for both of them. It's an
interesting idea, and I want to see how it works with both -O0 and -O3
codegen where we have different amounts of inlining.
<rdar://problem/27961419>
llvm-svn: 280906
Zachary Turner