Extract the existing code from getInstructionThroughput into
TTImpl::getUserCost. The duplicated code in the AMDGPU backend has
also been removed.
Differential Revision: https://reviews.llvm.org/D81448
When we rematerialize a value as part of the coalescing, we may
widen the register class of the destination register.
When this happens, updateRegDefUses may create additional subranges
to account for the wider register class.
The created subranges are empty and if they are not defined by
the rematerialized instruction we clean them up.
However, if they are defined by the rematerialized instruction but
unused, we failed to flag them as dead definition and would leave
them as empty live-range.
This is wrong because empty live-ranges don't interfere with anything,
thus if we don't fix them, we would fail to account that the
rematerialized instruction clobbers some lanes.
E.g., let us consider the following pseudo code:
def.lane_low64:reg128 = ldimm
newdef:reg32 = COPY def.lane_low64_low32
When rematerialization happens for newdef, we end up with:
newdef.lane_low64:reg128 = ldimm
= use newdef.lane_low64_low32
Let's look at the live interval of newdef.
Before rematerialization, we would get:
newdef [defIdx, useIdx:0) 0@defIdx
Right after updateRegDefUses, newdef register class is widen to reg128
and the subrange definitions will be augmented to fill the subreg that
is used at the definition point, here lane_low64.
The resulting live interval would be:
newdef [newDefIdx, useIdx:0) 0@newDefIdx
* lane_low64_high32 EMPTY
* lane_low64_low32 [newDefIdx, useIdx:0)
Before this patch this would be the final status of the live interval.
Therefore we miss that lane_low64_high32 is actually live on the
definition point of newdef.
With this patch, after rematerializing, we check all the added subranges
and for the ones that are defined but empty, we flag them as dead def.
Thus, in that case, newdef would look like this:
newdef [newDefIdx, useIdx:0) 0@newDefIdx
* lane_low64_high32 [newDefIdx, newDefIdxDead) ; <-- instead of EMPTY
* lane_low64_low32 [newDefIdx, useIdx:0)
This fixes https://www.llvm.org/PR46154
Try to avoid creating VGBMs by reusing the permutation mask if it contains a
zero. If the first byte was into (any byte of) a zero vector, then the first
byte of the mask can become zero and reused by putting the mask also as the
first operand. If there instead was a first-byte use of the other source
operand, then that zero index can be reused if the mask is placed as the
second operand.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D79925
It's better to reuse the first source value than to use an undef second
operand, because that will make more resulting VPERMs have identical operands
and therefore MachineCSE more successful.
Review: Ulrich Weigand
Use FP-mem instructions when folding reloads into single lane (W..) vector
instructions.
Only do this when all other operands of the instruction have already been
allocated to an FP (F0-F15) register.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D76705
When using vec_load/store_len_r with an immediate length operand
of 16 or larger, LLVM will currently emit an VLRL/VSTRL instruction
with that immediate. This creates a valid encoding (which should be
supported by the assembler), but always traps at runtime. This patch
fixes this by not creating VLRL/VSTRL in those cases.
This would result in loading the length into a register and
calling VLRLR/VSTRLR instead. However, these operations with
a length of 15 or larger are in fact simply equivalent to a
full vector load or store. And in fact the same holds true for
vec_load/store_len as well.
Therefore, add a DAGCombine rule to replace those operations with
plain vector loads or stores if the length is known at compile
time and equal or larger to 15.
Remove bad kill flags fom load-and-test.mir as discovered by
https://reviews.llvm.org/D78586: "[MachineVerifier] Add more checks for
registers in live-in lists".
Review: Ulrich Weigand
This patch adds
- New arguments to getMinPrefetchStride() to let the target decide on a
per-loop basis if software prefetching should be done even with a stride
within the limit of the hw prefetcher.
- New TTI hook enableWritePrefetching() to let a target do write prefetching
by default (defaults to false).
- In LoopDataPrefetch:
- A search through the whole loop to gather information before emitting any
prefetches. This way the target can get information via new arguments to
getMinPrefetchStride() and emit prefetches more selectively. Collected
information includes: Does the loop have a call, how many memory
accesses, how many of them are strided, how many prefetches will cover
them. This is NFC to before as long as the target does not change its
definition of getMinPrefetchStride().
- If a previous access to the same exact address was 'read', and the
current one is 'write', make it a 'write' prefetch.
- If two accesses that are covered by the same prefetch do not dominate
each other, put the prefetch in a block that dominates both of them.
- If a ConstantMaxTripCount is less than ItersAhead, then skip the loop.
- A SystemZ implementation of getMinPrefetchStride().
Review: Ulrich Weigand, Michael Kruse
Differential Revision: https://reviews.llvm.org/D70228
A spilled load of an immediate can use MVHI/MVGHI instead.
A compare of a spilled register against an immediate can use CHSI/CGHSI.
A logical compare can use CLFHSI/CLGHSI.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D76055
Replace single-lane (W... form) vector "multiply and add" and "multiply and
subtract" instructions with equivalent floating point instructions whenever
possible in SystemZShortenInst.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D76370
ISD::ROTL/ROTR rotation values are guaranteed to act as a modulo amount, so for power-of-2 bitwidths we only need the lowest bits.
Differential Revision: https://reviews.llvm.org/D76201
The type legalizer will scalarize vector conversions from integer to floating
point if the source element size is less than that of the result.
This is avoided now by inserting a zero/sign-extension of the source vector
before type legalization.
Review: Ulrich Weigand
Differential revision: https://reviews.llvm.org/D75978
Swap the compare operands if LHS is spilled while updating the CCMask:s of
the CC users. This is relatively straight forward since the live-in lists for
the CC register can be assumed to be correct during register allocation
(thanks to 659efa2).
Also fold a spilled operand of an LOCR/SELR into an LOC(G).
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D67437
On SystemZ there are a set of "access registers" that can be copied in and
out of 32-bit GPRs with special instructions. These instructions can only
perform the copy using low 32-bit parts of the 64-bit GPRs. However, the
default register class for 32-bit integers is GRX32, which also contains the
high 32-bit part registers.
In order to never end up with a case of such a COPY into a high reg, this
patch adds a new simple pre-RA pass that selects such COPYs into target
instructions.
This pass also handles COPYs from CC (Condition Code register), and COPYs to
CC can now also be emitted from a high reg in copyPhysReg().
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44254
Review: Ulrich Weigand.
Differential Revision: https://reviews.llvm.org/D75014
The incoming back chain slot was implicitly allocated whenever a GPR was
saved in SystemZFrameLowering::getRegSpillOffset(), but in cases where no
GPRs were saved/restored this did not take effect.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D75367
Forming subtract with overflow is beneficial on SystemZ, just like additions.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D75290
In order to build the Linux kernel, the back chain must be supported with
packed-stack. The back chain is then stored topmost in the register save
area.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D74506
isKnownNonNaN() could not recognize a zero splat because that is a
ConstantAggregateZero which is-a ConstantData but not a ConstantDataVector.
Patch makes a ConstantAggregateZero return true.
Review: Thomas Lively
Differential Revision: https://reviews.llvm.org/D74263
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
When more than one SelectPseudo instruction is handled a new MBB is
returned. This must not be done if that would result in leaving an undhandled
isel pseudo behind in the original MBB.
Fixes https://bugs.llvm.org/show_bug.cgi?id=44849.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D74352
Each function is with this compiled with the SystemZSubtarget initialized
from the functions attributes.
Review: Ulrich Weigand.
Differential Revision: https://reviews.llvm.org/D74086
This change implements the llvm intrinsic llvm.read_register for
the SystemZ platform which returns the value of the specified
register
(http://llvm.org/docs/LangRef.html#llvm-read-register-and-llvm-write-register-intrinsics).
This implementation returns the value of the stack register, and
can be extended to return the value of other registers. The
implementation for this intrinsic exists on various other platforms
including Power, x86, ARM, etc. but missing on SystemZ.
Reviewers: uweigand
Differential Revision: https://reviews.llvm.org/D73378
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
The "{=v0}" constraint did not result in the expected error message in the
abscence of the vector facility, because 'v0' matches as a string into the
AnyRegBitRegClass in common code.
This patch adds checks for vector support in case of "{v" and soft-float in
case of "{f" to remedy this.
Review: Ulrich Weigand.
These names have been changed from CamelCase to camelCase, but there were
many places (comments mostly) that still used the old names.
This change is NFC.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Code in getRoot made the assumption that every node in PendingLoads
must always itself have a dependency on the current DAG root node.
After the changes in 04a8696, it turns out that this assumption no
longer holds true, causing wrong codegen in some cases (e.g. stores
after constrained FP intrinsics might get deleted).
To fix this, we now need to make sure that the TokenFactor created
by getRoot always includes the previous root, if there is no implicit
dependency already present.
The original getControlRoot code already has exactly this check,
so this patch simply reuses that code now for getRoot as well.
This fixes the regression.
NFC if no constrained FP intrinsic is present.
We need to ensure that fpexcept.strict nodes are not optimized away even if
the result is unused. To do that, we need to chain them into the block's
terminator nodes, like already done for PendingExcepts.
This patch adds two new lists of pending chains, PendingConstrainedFP and
PendingConstrainedFPStrict to hold constrained FP intrinsic nodes without
and with fpexcept.strict markers. This allows not only to solve the above
problem, but also to relax chains a bit further by no longer flushing all
FP nodes before a store or other memory access. (They are still flushed
before nodes with other side effects.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72341
SystemZDAGToDAGISel::Select will attempt to split logical instruction
with a large immediate constant. This must not happen if the result
matches one of the z15 combined operations, so the code checks for
those. However, one of them was missed, causing invalid code to
be generated in the test case for PR44496.
Sam Parker