This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
llvm-svn: 308196
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
Several integer multiply/divide instructions require use of a
register pair as input and output. This patch moves setting
up the input register pair from C++ code to TableGen, simplifying
the whole process and making it more easily extensible.
No functional change.
llvm-svn: 307155
Fixes a couple of whitespace errors, re-sorts the vector floating-point
instructions to make them more easily extensible, and adds a missing
pseudo instruction.
No functional change.
llvm-svn: 307154
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
llvm-svn: 306876
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
llvm-svn: 306821
We sometimes need emergency spill slots for the register scavenger.
This may be the case when code needs to access a stack slot that
has an offset of 4096 or more relative to the stack pointer.
To make that determination, processFunctionBeforeFrameFinalized
currently simply checks the total stack frame size of the current
function. But this is not enough, since code may need to access
stack slots in the caller's stack frame as well, in particular
incoming arguments stored on the stack.
This commit fixes the problem by taking argument slots into account.
llvm-svn: 306305
Csmith discovered that this function can be called with a zero argument,
in which case an assert for this triggered.
This patch also adds a guard before the other call to this function since
it was missing, although the test only covers the case where it was
discovered.
Reduced test case attached as CodeGen/SystemZ/int-cmp-54.ll.
Review: Ulrich Weigand
llvm-svn: 306287
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
This reverts the use of TargetLowering::prepareVolatileOrAtomicLoad
introduced by r196905. Nothing in the semantics of the "volatile"
keyword or the definition of the z/Architecture actually requires
that volatile loads are preceded by a serialization operation, and
no other compiler on the platform actually implements this.
Since we've now seen a use case where this additional serialization
causes noticable performance degradation, this patch removes it.
The patch still leaves in the serialization before atomic loads,
which is now implemented directly in lowerATOMIC_LOAD. (This also
seems overkill, but that can be addressed separately.)
llvm-svn: 306117
The isBarrier/isTerminator flags have been removed from the SystemZ trap
instructions, so that tests do not fail with EXPENSIVE_CHECKS. This was just
an issue at -O0 and did not affect code output on benchmarks.
(Like Eli pointed out: "targets are split over whether they consider their
"trap" a terminator; x86, AArch64, and NVPTX don't, but ARM, MIPS, PPC, and
SystemZ do. We should probably try to be consistent here.". This is still the
case, although SystemZ has switched sides).
SystemZ now returns true in isMachineVerifierClean() :-)
These Generic tests have been modified so that they can be run with or without
EXPENSIVE_CHECKS: CodeGen/Generic/llc-start-stop.ll and
CodeGen/Generic/print-machineinstrs.ll
Review: Ulrich Weigand, Simon Pilgrim, Eli Friedman
https://bugs.llvm.org/show_bug.cgi?id=33047https://reviews.llvm.org/D34143
llvm-svn: 306106
Summary: The method TargetTransformInfo::getRegisterBitWidth() is declared const, but the type erasing implementation classes (TargetTransformInfo::Concept & TargetTransformInfo::Model) that were introduced by Chandler in https://reviews.llvm.org/D7293 do not have the method declared const. This is an NFC to tidy up the const consistency between TTI and its implementation.
Reviewers: chandlerc, rnk, reames
Reviewed By: reames
Subscribers: reames, jfb, arsenm, dschuff, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D33903
llvm-svn: 305189
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This adds a callback to the LLVMTargetMachine that lets target indicate
that they do not pass the machine verifier checks in all cases yet.
This is intended to be a temporary measure while the targets are fixed
allowing us to enable the machine verifier by default with
EXPENSIVE_CHECKS enabled!
Differential Revision: https://reviews.llvm.org/D33696
llvm-svn: 304320
TargetPassConfig is not useful for targets that do not use the CodeGen
library, so we may just as well store a pointer to an
LLVMTargetMachine instead of just to a TargetMachine.
While at it, also change the constructor to take a reference instead of a
pointer as the TM must not be nullptr.
llvm-svn: 304247
This adds assembler / disassembler support for the decimal
floating-point instructions. Since LLVM does not yet have
support for decimal float types, these cannot be used for
codegen at this point.
llvm-svn: 304203
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
llvm-svn: 304202
Use VLREP when inserting one or more loads into a vector. This is more
efficient than to first load and then use a VLVGP.
Review: Ulrich Weigand
llvm-svn: 304152
The loop vectorizer usually vectorizes any instruction it can and then
extracts the elements for a scalarized use. On SystemZ, all elements
containing addresses must be extracted into address registers (GRs). Since
this extraction is not free, it is better to have the address in a suitable
register to begin with. By forcing address arithmetic instructions and loads
of addresses to be scalar after vectorization, two benefits result:
* No need to extract the register
* LSR optimizations trigger (LSR isn't handling vector addresses currently)
Benchmarking show improvements on SystemZ with this new behaviour.
Any other target could try this by returning false in the new hook
prefersVectorizedAddressing().
Review: Renato Golin, Elena Demikhovsky, Ulrich Weigand
https://reviews.llvm.org/D32422
llvm-svn: 303744
EXPENSIVE_CHECKS found this bug (https://bugs.llvm.org/show_bug.cgi?id=33047), which
this patch fixes. The EAR instruction defines a GR32, not a GR64.
Review: Ulrich Weigand
llvm-svn: 303743
This adds a few missing instructions for the assembler and
disassembler. Those should be the last missing general-
purpose (Chapter 7) instructions for the z10 ISA.
llvm-svn: 302667
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
llvm-svn: 302665
This method must return a valid register class, or the list-ilp isel
scheduler will crash. For MVT::Untyped nullptr was previously returned, but
now ADDR128BitRegClass is returned instead. This is needed just as long as
list-ilp (and probably also list-hybrid) is still there.
Review: Ulrich Weigand, A Trick
https://reviews.llvm.org/D32802
llvm-svn: 302649
Jonas Paulsson