Following a discussion about the current state of this check on the 12.X branch, it was decided to purge the check as it wasn't in a fit to release state, see https://llvm.org/PR49318.
This check has since had some of those issues addressed and should be good for the next release cycle now, pending any more bug reports about it.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D97275
Pulled out from D90479 - this recognises invalid nsw shl patterns with signbit changes that result in poison.
Differential Revision: https://reviews.llvm.org/D97305
This is to limit compile time. I did experiments with some
inputs and found that compile time keeps reasonable for this
pass if we have less than 100000 virtual registers and then
starts to explode somewhere between 100000 and 150000.
Differential Revision: https://reviews.llvm.org/D97218
Originally, when we added the new driver, we created dedicated test
directories for `flang-new`. This way we separated the tests for the
`throwaway` and the new driver.
As we are increasing test coverage and starting to share tests between
the two drivers, it makes sense to share all directories and instead
rely on:
```
! REQUIRES: new-flang-driver
```
to mark tests as exclusively for the new driver.
Differential Revision: https://reviews.llvm.org/D97207
`ptx71` is not supported in release version of LLVM yet. As a result,
the support of CUDA 11.2 and CUDA 11.1 caused a compilation error as mentioned
in D97004. Since the support in D97004 is just a WA for releease, and we'll not
use it in the near future, using `ptx70` for CUDA 11 is feasible.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97195
Affine parallel ops may contain and yield results from MemRefsNormalizable ops in the loop body. Thus, both affine.parallel and affine.yield should have the MemRefsNormalizable trait.
Reviewed By: bondhugula
Differential Revision: https://reviews.llvm.org/D96821
This (mostly) reverts 32c501dd88. Hit a
case where this causes a behaviour change, perhaps the same root cause
that triggered the revert of a40db5502b in
7799ef7121.
(The API changes in DirectoryEntry.h have NOT been reverted as a number
of subsequent commits depend on those.)
https://reviews.llvm.org/D90497#2582166
This code creates 3 setccs that need to be expanded. It was
creating a sign bit test as setge X, 0 which is non-canonical.
Canonical would be setgt X, -1. This misses the special case in
IntegerExpandSetCCOperands for sign bit tests that assumes
canonical form. If we don't hit this special case we end up
with a multipart setcc instead of just checking the sign of
the high part.
To fix this I've reversed the polarity of all of the setccs to
setlt X, 0 which is canonical. The rest of the logic should
still work. This seems to produce better code on RISCV which
lacks a setgt instruction.
This probably still isn't the best code sequence we could use here.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97181
The Linux kernel when built with CONFIG_THUMB2_KERNEL makes use of these
instructions with immediate operands and wide encodings.
These are the T4 variants of the follow sections from the Arm ARM.
F5.1.72 LDR (immediate)
F5.1.229 STR (immediate)
I wasn't able to represent these simple aliases using t2InstAlias due to
the Constraints on the non-suffixed existing instructions, which results
in some manual parsing logic needing to be added.
F1.2 Standard assembler syntax fields
describes the use of the .w (wide) vs .n (narrow) encoding suffix.
Link: https://bugs.llvm.org/show_bug.cgi?id=49118
Link: https://github.com/ClangBuiltLinux/linux/issues/1296
Reported-by: Stefan Agner <stefan@agner.ch>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D96632
Add support for the new crash reporter api if the headers are available. Falls back to the old API if they are not available. This change was based on [[ 0164d546d2/llvm/lib/Support/PrettyStackTrace.cpp (L111) | /llvm/lib/Support/PrettyStackTrace.cpp ]]
There is a lit for this behavior here: https://reviews.llvm.org/D96737 but is not included in this diff because it is potentially flaky.
rdar://69767688
Reviewed By: delcypher, yln
Commited by Dan Liew on behalf of Emily Shi.
Differential Revision: https://reviews.llvm.org/D96830
Added a lit test that finds its corresponding crash log and checks to make sure it has asn output under `Application Specific Information`.
This required adding two python commands:
- `get_pid_from_output`: takes the output from the asan instrumentation and parses out the process ID
- `print_crashreport_for_pid`: takes in the pid of the process and the file name of the binary that was run and prints the contents of the corresponding crash log.
This test was added in preparation for changing the integration with crash reporter from the old api to the new api, which is implemented in a subsequent commit.
rdar://69767688
Reviewed By: delcypher
Commited by Dan Liew on behalf of Emily Shi.
Differential Revision: https://reviews.llvm.org/D96737
Add `frame variable` dereference suppport to libc++ `std::shared_ptr`.
This change allows for commands like `v *thing_sp` and `v thing_sp->m_id`. These
commands now work the same way they do with raw pointers. This is done by adding an
unaccounted for child member named `$$dereference$$`.
Also, add API tests for `std::shared_ptr`, previously there were none.
Differential Revision: https://reviews.llvm.org/D97165
Generalize the return value of tryToCreateWidenRecipe to return either a
newly create recipe or an existing VPValue. Use this to avoid creating
unnecessary VPBlendRecipes.
Fixes PR44800.
Prefer to keep uniform (non-divergent) multiplies on the scalar ALU when
possible. This significantly improves some game cases by eliminating
v_readfirstlane instructions when the result feeds into a scalar
operation, like the address calculation for a scalar load or store.
Since isDivergent is only an approximation of whether a value is in
SGPRs, it can potentially regress some situations where a uniform value
ends up in a VGPR. These should be rare in real code, although the test
changes do contain a number of examples.
Most of the test changes are just using s_mul instead of v_mul/mad which
is generally better for both register pressure and latency (at least on
GFX10 where sgpr pressure doesn't affect occupancy and vector ALU
instructions have significantly longer latency than scalar ALU). Some
R600 tests now use MULLO_INT instead of MUL_UINT24.
GlobalISel appears to handle more scenarios in the desirable way,
although it can also be thrown off and fails to select the 24-bit
multiplies in some cases.
Alternative solution considered and rejected was to allow selecting
MUL_[UI]24 to S_MUL_I32. I've rejected this because the definition of
those SD operations works is don't-care on the most significant 8 bits,
and this fact is used in some combines via SimplifyDemandedBits.
Based on a patch by Nicolai Hähnle.
Differential Revision: https://reviews.llvm.org/D97063
The new intrinsic replaces the size in one specified AsyncFunctionPointer with
the size in another. This ability is necessary for functions which merely
forward to async functions such as those defined for partial applications.
Reviewed By: aschwaighofer
Differential Revision: https://reviews.llvm.org/D97229
This matches how libc++ itself is built. This avoids errors due to
mismatch if linking libc++ statically.
Differential Revision: https://reviews.llvm.org/D97169
This check registers an IncludeInserter, however the check itself doesn't actually emit any fixes or includes, so the inserter is redundant.
From what I can tell the fixes were removed in D26453(rL290051) but the inserter was left in, probably an oversight.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D97243
This commit prevents warnings from -Wconversion when a clang vector type
is implicitly converted to a sizeless builtin type -- for example, when
implicitly converting a fixed-predicate to a scalable predicate.
The code below:
1 #include <arm_sve.h>
2
3 #define N __ARM_FEATURE_SVE_BITS
4 #define FIXED_ATTR __attribute__((arm_sve_vector_bits (N)))
5 typedef svbool_t fixed_svbool_t FIXED_ATTR;
6
7 inline fixed_svbool_t foo(fixed_svbool_t p) {
8 return svnot_z(svptrue_b64(), p);
9 }
would previously raise this warning:
warning: implicit conversion turns vector to scalar: \
'fixed_svbool_t' (vector of 8 'unsigned char' values) to 'svbool_t' \
(aka '__SVBool_t') [-Wconversion]
Note that many cases of these implicit conversions were already
permitted because many functions inside arm_sve.h are spawned via
preprocessor macros, and the call to isInSystemMacro would cover us in
this case. This commit fixes the remaining cases.
Differential Revision: https://reviews.llvm.org/D97053
An option is added to the check to select wich set of functions is
defined as asynchronous-safe functions.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D90851
Change some test cases to use divergent addresses for vector loads,
which should be the common case in real world code. Using uniform
addresses causes poor instruction selection for the surrounding
code which has to be fixed up post-register-allocation, and this causes
a lot of testsuite churn for a forthcoming patch to stop selecting
24-bit vector multiply instructions for uniform multiplies.
This shows up some problems in the idot tests where we fail to select
v_dot instructions because the patterns only match MUL_[UI]24 ISD nodes,
but the DAG contains i16 mul nodes instead.
Differential Revision: https://reviews.llvm.org/D97062
Early versions of the ARMv7 reference manuals considered the sp register
as a deprecated register for ldm/stm familiy of instructions. However,
later versions such as ARM DDI 0406C.d added a note to the Appendix:
D9.3 Use of the SP as a general-purpose register
Most ARM instructions, unlike Thumb instructions, provide exactly the
same access to the SP as to R0-R12. This means that it is possible to
use the SP as a general-purpose register. Earlier issues of this manual
deprecated the use of SP in an ARM instruction, in any way that is
deprecated, not permitted, or not possible in the corresponding
Thumb instruction. However, user feedback indicates a number of cases
where these instructions are useful. Therefore, ARM no longer deprecates
these instruction uses.
Also Armv8 manuals no longer consider SP as deprecated register for ldm/
stm A32 instructions.
Furthermore, GNU as also does not print a deprecated warning when using
SP with those instructions.
Drop deprecation warning for pop/ldm/push/stm instructions.
Patch by: Stefan Agner.
Differential Revision: https://reviews.llvm.org/D82692
As a followup to D95291, getOperandsScalarizationOverhead was still
using a VF as a vector factor if the arguments were scalar, and would
assert on certain matrix intrinsics with differently sized vector
arguments. This patch removes the VF arg, instead passing the Types
through directly. This should allow it to more accurately compute the
cost without having to guess at which operands will be vectorized,
something difficult with more complex intrinsics.
This adjusts one SVE test as it is now calling the wrong intrinsic vs
veccall. Without invalid InstructCosts the cost of the scalarized
intrinsic is too low. This should get fixed when the cost of
scalarization is accounted for with scalable types.
Differential Revision: https://reviews.llvm.org/D96287
getIntrinsicInstrCost takes a IntrinsicCostAttributes holding various
parameters of the intrinsic being costed. It can either be called with a
scalar intrinsic (RetTy==Scalar, VF==1), with a vector instruction
(RetTy==Vector, VF==1) or from the vectorizer with a scalar type and
vector width (RetTy==Scalar, VF>1). A RetTy==Vector, VF>1 is considered
an error. Both of the vector modes are expected to be treated the same,
but because this is confusing many backends end up getting it wrong.
Instead of trying work with those two values separately this removes the
VF parameter, widening the RetTy/ArgTys by VF used called from the
vectorizer. This keeps things simpler, but does require some other
modifications to keep things consistent.
Most backends look like this will be an improvement (or were not using
getIntrinsicInstrCost). AMDGPU needed the most changes to keep the code
from c230965ccf working. ARM removed the fix in
dfac521da1, webassembly happens to get a fixup for an SLP cost
issue and both X86 and AArch64 seem to now be using better costs from
the vectorizer.
Differential Revision: https://reviews.llvm.org/D95291
GNU-style attribute in enum bodies are allowed (and used by several
tests), and this call to ProhibitAttributes() was dead code.
Differential Revision: https://reviews.llvm.org/D97271
The run-clang-tidy.py helper script is supposed to be used by the
user, hence it should be placed in the user's PATH. Some
distributions, like Gentoo [1], won't have it in PATH unless it is
installed in bin/.
Furthermore, installed scripts in PATH usually do not carry a filename
extension, since there is no need to know that this is a Python
script. For example Debian and Ubuntu already install this script as
'run-clang-tidy' [2] and hence build systems like Meson also look for
this name first [3]. Hence we install run-clang-tidy.py as
run-clang-tidy, as suggested by Sylvestre Ledru [4].
1: https://bugs.gentoo.org/753380
2: 60aefb1417/debian/clang-tidy-X.Y.links.in (L2)
3: b6dc4d5e5c/mesonbuild/scripts/clangtidy.py (L44)
4: https://reviews.llvm.org/D90972#2380640
Reviewed By: sylvestre.ledru, JonasToth
Differential Revision: https://reviews.llvm.org/D90972
The **IsGuaranteedLoopInvariant** function is making sure to check if the
incoming pointer is guaranteed to be loop invariant, therefore I think
the case where the pointer is defined in the entry block of a function
automatically guarantees the pointer to be loop invariant, as the entry
block of a function cannot have predecessors or be part of a loop.
I implemented this small patch and tested it using
**ninja check-llvm-unit** and **ninja check-llvm**. I added a contained test
file that shows the problem and used **opt -O3 -debug** on it to make sure
the case is not currently handled (in fact the debug log is showing that
the DSE pass is bailing out when testing if the killer store is able to
clobber the dead store).
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96979
After updating the user interface in D96515, update the docs
reflecting the new approach.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D96616
This transformation was only used for quick experimentation and is not general enough.
Retire it.
Differential Revision: https://reviews.llvm.org/D97266
Those functions aren't called anywhere. For debugging purposes we usually
have Dump() methods (which already exist in some semi-functional form in
ValueObject).
If resulting size of the output stream is already known,
then the space for stream data could be preliminary
allocated in some cases. f.e. raw_string_ostream could
preallocate the space for the target string(it allows
to avoid reallocations during writing into the stream).
Differential Revision: https://reviews.llvm.org/D91693
Jessica Paquette