r298178 capitalized the fields in `ArgListEntry`. All the official
targets were updated accordingly, but as an experimental target AVR
was missed.
llvm-svn: 298677
- Avoid explosive growth of the simplification queue by not queuing
expressions that are alredy in it.
- Add an iteration counter and abort after a sufficiently large number
of iterations (assuming that it's a symptom of an infinite loop).
llvm-svn: 298655
Summary:
The true and false operands for the CMOV are operands 0 and 1.
ARMISelLowering.cpp::computeKnownBits was looking at operands 1 and 2
instead. This can cause CMOV instructions to be incorrectly folded into
BFI if value set by the CMOV is another CMOV, whose known bits are
computed incorrectly.
This patch fixes the issue and adds a test case.
Reviewers: kristof.beyls, jmolloy
Subscribers: llvm-commits, aemerson, srhines, rengolin
Differential Revision: https://reviews.llvm.org/D31265
llvm-svn: 298624
Summary:
1. Support pointer type as function argumnet and return value
2. G_STORE/G_LOAD - set legal action for i8/i16/i32/i64/f32/f64/vec128
3. RegisterBank - support typeless operations like G_STORE/G_LOAD, for scalar use GPR bank.
4. Support instruction selection for G_LOAD/G_STORE
Reviewers: zvi, rovka, ab, qcolombet
Reviewed By: rovka
Subscribers: llvm-commits, dberris, kristof.beyls, eladcohen, guyblank
Differential Revision: https://reviews.llvm.org/D30973
llvm-svn: 298609
Summary: Cleanup some remnants of code from when the X86FixupBWInsts pass did both forward liveness analysis and backward liveness analysis.
Reviewers: MatzeB, myatsina, DavidKreitzer
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31264
llvm-svn: 298599
This patch fixes decoding of size and position for DINSM
and DINSU instructions.
Differential Revision: https://reviews.llvm.org/D31072
llvm-svn: 298593
Up until now, vpmovm2 instruction described its destination operand size
by the source operand size. This patch adds new pattern for the vpmovm2
instruction. The node describes new expansion of the destination (from
{128|256} to 512).
Differential Revision: https://reviews.llvm.org/D30654
llvm-svn: 298586
- Rename runtime metadata -> code object metadata
- Make metadata not flow
- Switch enums to use ScalarEnumerationTraits
- Cleanup and move AMDGPUCodeObjectMetadata.h to AMDGPU/MCTargetDesc
- Introduce in-memory representation for attributes
- Code object metadata streamer
- Create metadata for isa and printf during EmitStartOfAsmFile
- Create metadata for kernel during EmitFunctionBodyStart
- Finalize and emit metadata to .note during EmitEndOfAsmFile
- Other minor improvements/bug fixes
Differential Revision: https://reviews.llvm.org/D29948
llvm-svn: 298552
This is used for a specific type of return to a shader part's
epilog code. Rename to try avoiding confusion from a true
call's return.
llvm-svn: 298452
This adds a parameter to @llvm.objectsize that makes it return
conservative values if it's given null.
This fixes PR23277.
Differential Revision: https://reviews.llvm.org/D28494
llvm-svn: 298430
This patch introduces X86AsmParser with the ability to handle the aforementioned ops within compound "MS" arithmetical expressions.
Currently - only supported as a stand alone Operand, e.g.:
"TYPE X"
now allowed :
"4 + TYPE X * 128"
Clang side: https://reviews.llvm.org/D31174
Differential Revision: https://reviews.llvm.org/D31173
llvm-svn: 298425
including the amended (no UB anymore) fix for adding/subtracting -2147483648.
This reverts r298328 "[ARM] Revert r297443 and r297820."
and partially reverts r297842 "Revert "[Thumb1] Fix the bug when adding/subtracting -2147483648""
llvm-svn: 298417
[Hexagon] Recognize polynomial-modulo loop idiom again
Regain the ability to recognize loops calculating polynomial modulo
operation. This ability has been lost due to some changes in the
preceding optimizations. Add code to preprocess the IR to a form
that the pattern matching code can recognize.
llvm-svn: 298400
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Summary:
To support negative immediates for certain arithmetic instructions, the
instruction is converted to the inverse instruction with a negated (or inverted)
immediate. For example, "ADD r0, r1, #FFFFFFFF" cannot be encoded as an ADD
instruction. However, "SUB r0, r1, #1" is equivalent.
These conversions are different from instruction aliases. An alias maps
several assembler instructions onto one encoding. A conversion, however, maps
an *invalid* instruction--e.g. with an immediate that cannot be represented in
the encoding--to a different (but equivalent) instruction.
Several instructions with negative immediates were being converted already, but
this was not systematically tested, nor did it cover all instructions.
This patch implements all possible substitutions for ARM, Thumb1 and
Thumb2 assembler and adds tests. It also adds a feature flag
(-mattr=+no-neg-immediates) to turn these substitutions off. This is
helpful for users who want their code to assemble to exactly what they
wrote.
Reviewers: t.p.northover, rovka, samparker, javed.absar, peter.smith, rengolin
Reviewed By: javed.absar
Subscribers: aadg, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D30571
llvm-svn: 298380
We could do better by splitting any oversized type into whatever vector size the target supports,
but I left that for future work if it ever comes up. The motivating case is memcmp() calls on 16-byte
structs, so I think we can wire that up with a TLI hook that feeds into this.
Differential Revision: https://reviews.llvm.org/D31156
llvm-svn: 298376
Summary:
First iteration of SDWA peephole.
This pass tries to combine several instruction into one SDWA instruction. E.g. it converts:
'''
V_LSHRREV_B32_e32 %vreg0, 16, %vreg1
V_ADD_I32_e32 %vreg2, %vreg0, %vreg3
V_LSHLREV_B32_e32 %vreg4, 16, %vreg2
'''
Into:
'''
V_ADD_I32_sdwa %vreg4, %vreg1, %vreg3 dst_sel:WORD_1 dst_unused:UNUSED_PAD src0_sel:WORD_1 src1_sel:DWORD
'''
Pass structure:
1. Iterate over machine instruction in basic block and try to apply "SDWA patterns" to each of them. SDWA patterns match machine instruction into either source or destination SDWA operand. E.g. ''' V_LSHRREV_B32_e32 %vreg0, 16, %vreg1''' is matched to source SDWA operand '''%vreg1 src_sel:WORD_1'''.
2. Iterate over found SDWA operands and find instruction that could be potentially coverted into SDWA. E.g. for source SDWA operand potential instruction are all instruction in this basic block that uses '''%vreg0'''
3. Iterate over all potential instructions and check if they can be converted into SDWA.
4. Convert instructions to SDWA.
This review contains basic implementation of SDWA peephole pass. This pass requires additional testing fot both correctness and performance (no performance testing done).
There are several ways this pass can be improved:
1. Make this pass work on whole function not only basic block. As I can see this can be done right now without changes to pass.
2. Introduce more SDWA patterns
3. Introduce mnemonics to limit when SDWA patterns should apply
Reviewers: vpykhtin, alex-t, arsenm, rampitec
Subscribers: wdng, nhaehnle, mgorny
Differential Revision: https://reviews.llvm.org/D30038
llvm-svn: 298365
This patch fixes an issue in the Optimize LEAs pass where redundant LEAs were
not removed because they were being used by debug values. The debug values are
now ignored when determining whether LEAs are redundant.
For now the debug values for the redundant LEAs are marked as undefined,
effectively lost. The intention is for a follow up patch which will attempt to
preserve the debug values where possible.
Patch by Andrew Ng.
Differential Revision: https://reviews.llvm.org/D30835
llvm-svn: 298360
The def operand of the new LG/LD should have the old def operands
flags and subreg index.
New test: test/CodeGen/SystemZ/fold-memory-op-impl.ll
Review: Ulrich Weigand
llvm-svn: 298341
The glueless lowering of addc/adde in Thumb1 has known serious
miscompiles (see https://reviews.llvm.org/D31081), and r297820
causes an infinite loop for certain constructs. It's not
clear when they will be fixed, so let's just take them out
of the tree for now.
(I resolved a small conflict with r297453.)
llvm-svn: 298328
The special case of zero sized values was previously not handled correctly.
This patch handles this by not promoting if the size is zero.
Patch by Tim Neumann.
Differential Revision: https://reviews.llvm.org/D31116
llvm-svn: 298320
Make x86_64-fuchsia targets under -mcmodel=kernel use %gs rather
than %fs to access ABI slots for stack-protector and safe-stack
Patch by Roland McGrath.
Differential Revision: https://reviews.llvm.org/D30870
llvm-svn: 298302
Regain the ability to recognize loops calculating polynomial modulo
operation. This ability has been lost due to some changes in the
preceding optimizations. Add code to preprocess the IR to a form
that the pattern matching code can recognize.
llvm-svn: 298282
Forgot to remove some output before committing last time. (Instruction fixups
don't actually overflow anywhere in the test suite so far, so I missed it).
To prevent the outliner from screaming "Overflow!" in the event that that
does happen, this commit removes that output.
llvm-svn: 298260
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
llvm-svn: 298254
Summary:
Currently we handle these intrinsics at isel with special patterns. But as they just map to normal logic operations, we should just handle them at lowering. This will expose them to DAG combine optimizations. Right now the kor-sequence test generates a bunch of regclass copies between GR16 and VK16 that the peephole optimizer and/or register coallescing are removing to keep everything in the mask domain. By handling the logic op intrinsics earlier, these copies become bitcasts in the DAG and get removed by DAG combine which seems more robust.
This should help enable my plan to stop copying between K registers and GR8/GR16. The peephole optimizer can't remove a chain of copies between K and GR32 with insert_subreg/extract_subreg present in the chain so the kor-sequence test break. But this patch should dodge the problem entirely.
Reviewers: zvi, delena, RKSimon, igorb
Reviewed By: igorb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31056
llvm-svn: 298228
The MIR printer dumps a string that describe the register mask of a function.
A static predefined list of register masks matches a static list of strings.
However when the register mask is not from the static predefined list, there is no descriptor string and the printer fails.
This patch adds support to custom register mask printing and dumping.
Also the list of callee saved registers (describing the registers that must be preserved for the caller) might be dynamic.
As such this data needs to be dumped and parsed back to the Machine Register Info.
Differential Revision: https://reviews.llvm.org/D30971
llvm-svn: 298207
Let targets specialize the pass with the register class so we can get a
parameterless default constructor and can put the pass into the pass
registry to enable testing with -run-pass=.
llvm-svn: 298184
This is direct port of HSAILAliasAnalysis pass, just cleaned for
style and renamed.
Differential Revision: https://reviews.llvm.org/D31103
llvm-svn: 298172
This commit adds the necessary target hooks for outlining in AArch64. It also
refactors the switch statement used in `getMemOpBaseRegImmOfsWidth` into a
more general function, `getMemOpInfo`. This allows the outliner to share that
code without copying and pasting it.
The AArch64 outliner can be run using -mllvm -enable-machine-outliner, as with
the X86-64 outliner.
The test for this pass verifies that the outliner does, in fact outline
functions, fixes up the stack accesses properly, and can correctly generate a
tail call. In the future, this test should be replaced with a MIR test, so that
we can properly test immediate offset overflows in fixed-up instructions.
llvm-svn: 298162
If the loop condition was an i1 phi with a constantexpr input, this
would add a loop intrinsic fed by a phi dependent on a call to
if.break in the same block. Insert the call in the loop header.
llvm-svn: 298121
Move backend internal intrinsics along with the rest of the
normal intrinsics, and use the Intrinsic::getDeclaration
API instead of manually constructing the type list.
It's surprising this was working before. fdiv.fast had
the wrong number of parameters. The control flow intrinsic
declaration attributes were not being applied, and
their types were inconsistent. The actual IR use types
did not match the declaration, and were closer to the
types used for the patterns. The brcond lowering
was changing the types, so introduce new nodes for those.
llvm-svn: 298119
Summary:
Use this code pattern when RAX is live, instead of emitting up to 2
billion adjustments:
pushq %rax
movabsq +-$Offset+-8, %rax
addq %rsp, %rax
xchg %rax, (%rsp)
movq (%rsp), %rsp
Try to clean this code up a bit while I'm here. In particular, hoist the
logic that handles the entire adjustment with `movabsq $imm, %rax` out
of the loop.
This negates the offset in the prologue and uses ADD because X86 only
has a two operand subtract which always subtracts from the destination
register, which can no longer be RSP.
Fixes PR31962
Reviewers: majnemer, sdardis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30052
llvm-svn: 298116
As noted in the comment, we might want to account for this case,
but I didn't look at what that would mean for the asm.
I'm also not sure why this only reproduces with avx512, but I'm
putting a conservative fix in for now to avoid the crash.
Also, if both sides of an add are zexted, shouldn't we shrink that add?
https://bugs.llvm.org/show_bug.cgi?id=32316
llvm-svn: 298107
Loop unswitching can be extremely harmful for a SIMT target. In case
if hoisted condition is not uniform a SIMT machine will execute both
clones of a loop sequentially. Therefor LoopUnswitch checks if the
condition is non-divergent.
Since DivergenceAnalysis adds an expensive PostDominatorTree analysis
not needed for non-SIMT targets a new option is added to avoid unneded
analysis initialization. The method getAnalysisUsage is called when
TargetTransformInfo is not yet available and we cannot use it here.
For that reason a new field DivergentTarget is added to PassManagerBuilder
to control the behavior and set this field from a target.
Differential Revision: https://reviews.llvm.org/D30796
llvm-svn: 298104
Fixing triple format in the tests added for the branch label fix for Thumb
Targets. Also recommitting previously approved patch, see
https://reviews.llvm.org/D30943.
Reviewed by: samparker
Differential Revision: https://reviews.llvm.org/D30987
llvm-svn: 298056
We weren't able to handle isel of the 128/256-bit FMA instructions when AVX512F was enabled but VLX and FMA weren't.
I didn't mask FeatureAVX512 imply FeatureFMA as I wasn't sure I wanted disabling FMA to also disable AVX512. Instead we just can't prevent FMA instructions if AVX512 is enabled.
Another option would be to promote 128/256-bit to 512-bit, do the operation and extract it. But that requires a lot of extra isel patterns. Since no CPUs exist that support AVX512, but not FMA just using the VEX instructions seems better.
llvm-svn: 298051
If one of the subregs of the 128 bit reg is undefined when splitMove() splits
a store into two instructions, a use of an undefined physical register
results.
To remedy this, an implicit use of the super register is added onto both new
instructions, along with propagated kill and undef flags.
This was discovered with llvm-stress, and that test case is attached as
test/CodeGen/SystemZ/splitMove_undefReg_mverifier.ll
Thanks to Matthias Braun for helping with a nice explanation.
Review: Ulrich Weigand
llvm-svn: 298047
This makes the values a little more consistent between similar instruction and reduces the values some. This results in better grouping in the isel table saving a few bytes.
llvm-svn: 298043
This allows the optimization to rearrange loads and stores more
aggressively. This doesn't really affect performance, but it helps
codesize.
Differential Revision: https://reviews.llvm.org/D30839
llvm-svn: 298021
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
A recent change switch the in-memory wasm value types
to be signed integers, but I missing a few cases where
these were being writing to the binary.
Differential Revision: https://reviews.llvm.org/D31014
Patch by Sam Clegg
llvm-svn: 297991
In fact this default implementation should be the only implementation,
keep it virtual for now to accomodate targets that don't model flags
correctly.
Differential Revision: https://reviews.llvm.org/D30747
llvm-svn: 297980
Earlier stages of GlobalISel always use ConstantInt in G_CONSTANT so that's
what we should check for.
This fixes a crash introduced in r297782.
llvm-svn: 297968
We can mark functions to always inline early in the opt. Since we do not have
call support this early inlining creates opportunities for inter-procedural
optimizations which would not occur otherwise.
Differential Revision: https://reviews.llvm.org/D31016
llvm-svn: 297958
computeKnownBits didn't handle fp_to_fp16 to report
the high bits as 0. ARM maps the generic node to an instruction
that does not modify the high bits of the register, so introduce
a target node where the high bits are known 0.
llvm-svn: 297873
If we got unlucky with register allocation and actual constpool placement, we
could end up producing a tTBB_JT with an index that's already been clobbered.
Technically, we might be able to fix this situation up with a MOV, but I think
the constant islands pass is complex enough without having to deal with more
weird edge-cases.
llvm-svn: 297871
mfvrd and mffprd are both alias to mfvrsd.
This patch enables correct parsing of the aliases, but we still emit a mfvrsd.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29177
llvm-svn: 297849
This patch adds support for recognizing more patterns to match to DEXT and
CINS instructions.
It finds cases where multiple instructions could be replaced with a single
DEXT or CINS instruction.
For example, for the following:
define i64 @dext_and32(i64 zeroext %a) {
entry:
%and = and i64 %a, 4294967295
ret i64 %and
}
instead of generating:
0000000000000088 <dext_and32>:
88: 64010001 daddiu at,zero,1
8c: 0001083c dsll32 at,at,0x0
90: 6421ffff daddiu at,at,-1
94: 03e00008 jr ra
98: 00811024 and v0,a0,at
9c: 00000000 nop
the following gets generated:
0000000000000068 <dext_and32>:
68: 03e00008 jr ra
6c: 7c82f803 dext v0,a0,0x0,0x20
Cases that are covered:
DEXT:
1. and $src, mask where mask > 0xffff
2. zext $src zero extend from i32 to i64
CINS:
1. and (shl $src, pos), mask
2. shl (and $src, mask), pos
3. zext (shl $src, pos) zero extend from i32 to i64
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D30464
llvm-svn: 297832
Different MCInstrAnalysis classes for arm and thumb mode, each with
their own evaluateBranch implementation. I added a test case and
fixed the coff-relocations test to use '<label>:' rather than
'<label>' in the CHECK-LABEL entries, since the ones without the
colon would match branch targets. Might be worth noticing that
llvm-objdump does not lookup the relocation and thus assigns it a
target depending on the encoded immediate which #0, so it thinks it
branches to the next instruction.
Committed on behalf of Andre Vieira (avieira).
Differential Revision: https://reviews.llvm.org/D30943
llvm-svn: 297821
Enable the selection of the 64-bit signed multiply accumulate
instructions which operate on 16-bit operands. These are enabled for
ARMv5TE onwards for ARM and for V6T2 and other DSP enabled Thumb
architectures.
Differential Revision: https://reviews.llvm.org/D30044
llvm-svn: 297809
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
llvm-svn: 297780
Previously we were using the encoded LEB hex values
for the value types. This change uses the decoded
negative value and the LEB encoder to write them out.
Differential Revision: https://reviews.llvm.org/D30847
Patch by Sam Clegg
llvm-svn: 297777
Make MCSectionELF::AssociatedSection be a link to a symbol, because
that's how it works in the assembly, and use it in the asm printer.
llvm-svn: 297769
This instruction was missing from the list of opcodes that we check, so we were
hitting an llvm_unreachable in ARMMCCodeEmitter.cpp for the ARM MOVT
instruction, rather than the diagnostic that is emitted for the other MOVW/MOVT
instructions.
Differential revision: https://reviews.llvm.org/D30936
llvm-svn: 297739
Create nodes for smulwb and smulwt and move their selection from
DAGToDAG to DAG combine. smlawb and smlawt can then be selected
using tablegen. Added some helper functions to detect shift patterns
as well as a wrapper around SimplifyDemandBits. Added a couple of
extra tests.
Differential Revision: https://reviews.llvm.org/D30708
llvm-svn: 297716
Each Calling convention (CC) defines a static list of registers that should be preserved by a callee function. All other registers should be saved by the caller.
Some CCs use additional condition: If the register is used for passing/returning arguments – the caller needs to save it - even if it is part of the Callee Saved Registers (CSR) list.
The current LLVM implementation doesn’t support it. It will save a register if it is part of the static CSR list and will not care if the register is passed/returned by the callee.
The solution is to dynamically allocate the CSR lists (Only for these CCs). The lists will be updated with actual registers that should be saved by the callee.
Since we need the allocated lists to live as long as the function exists, the list should reside inside the Machine Register Info (MRI) which is a property of the Machine Function and managed by it (and has the same life span).
The lists should be saved in the MRI and populated upon LowerCall and LowerFormalArguments.
The patch will also assist to implement future no_caller_saved_regsiters attribute intended for interrupt handler CC.
Differential Revision: https://reviews.llvm.org/D28566
llvm-svn: 297715
getIntrinsicInstrCost() used to only compute scalarization cost based on types.
This patch improves this so that the actual arguments are checked when they are
available, in order to handle only unique non-constant operands.
Tests updates:
Analysis/CostModel/X86/arith-fp.ll
Transforms/LoopVectorize/AArch64/interleaved_cost.ll
Transforms/LoopVectorize/ARM/interleaved_cost.ll
The improvement in getOperandsScalarizationOverhead() to differentiate on
constants made it necessary to update the interleaved_cost.ll tests even
though they do not relate to intrinsics.
Review: Hal Finkel
https://reviews.llvm.org/D29540
llvm-svn: 297705
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
rL230225 made the assumption that only the lower 32-bits of an MMX register load is used as a shift value, when in fact the whole 64-bits are reloaded and treated as a i64 to determine the shift value.
This patch reverts rL230225 to ensure that the whole 64-bits of memory are folded and ensures that the upper 32-bit are zero'd for cases where the shift value has come from a scalar source.
Found during fuzz testing.
Differential Revision: https://reviews.llvm.org/D30833
llvm-svn: 297667
I am leaving the code in clang which filters mxcsr from the clobber list because that is still technically correct and will be useful again when the MXCSR register is reintroduced.
llvm-svn: 297664
This commit adds tail call support to the MachineOutliner pass. This allows
the outliner to insert jumps rather than calls in areas where tail calling is
possible. Outlined tail calls include the return or terminator of the basic
block being outlined from.
Tail call support allows the outliner to take returns and terminators into
consideration while finding candidates to outline. It also allows the outliner
to save more instructions. For example, in the X86-64 outliner, a tail called
outlined function saves one instruction since no return has to be inserted.
llvm-svn: 297653
For AVX-512 we force the input to zero if the input is undef or the mask is all ones to break an execution dependency. This patch brings the same behavior to AVX2.
llvm-svn: 297652
We were already forcing undef inputs to become a zero vector, this now catches an all ones mask too.
Ideally we'd use undef and let execution dep fix handle picking the best register/clearance for the undef, but I don't think it can handle the early clobber today.
llvm-svn: 297651
We used to hit an unreachable in getRegBankFromRegClass when dealing with the
stack pointer. This commit adds support for the GPRsp reg class.
llvm-svn: 297621
Loop over the ARM decode tables; this is a clean-up to reduce some code
duplication.
Differential Revision: https://reviews.llvm.org/D30814
llvm-svn: 297608
The immediate should be 1 or 2, not 0 or 1. This was found while adding bounds checking to clang. In fact the existing clang builtin test failed if we ran it all the way to assembly.
llvm-svn: 297591
I noticed unnecessary 'sbb' instructions in D30472 and while looking at 'ptest' codegen recently.
This happens because we were transforming any 'setb' - even when we only wanted a single-bit result.
This patch moves those transforms under visitAdd/visitSub, so we we're only creating sbb/adc when it
is a win. I don't know why we need a SETCC_CARRY node type, but I'm not proposing to change that
existing behavior in this patch.
Also, I'm skeptical that sbb/adc are a win for all micro-arches, so I added comments to the test files
where this transform still fires.
The test changes here are all cases where we no longer produce sbb/adc. Avoiding partial register
stalls (generating an xor to clear a register) is not handled in some cases, but that's a separate
issue.
Differential Revision: https://reviews.llvm.org/D30611
llvm-svn: 297586
Summary:
A53 scheduler causes an assertion failure on all CRC instructions:
include/llvm/CodeGen/MachineInstr.h:280: const llvm::MachineOperand
&llvm::MachineInstr::getOperand(unsigned int) const: Assertion `i <
getNumOperands() && "getOperand() out of range!"' failed.
The case statements corresponding to CRC instructions are incorrect and should
be removed.
Also adding a testcase while on this.
Reviewers: t.p.northover, javed.absar, apazos, rengolin
Reviewed By: rengolin
Subscribers: evandro, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30274
llvm-svn: 297582
I'm pretty sure there are more problems lurking here. But I think this fixes PR32241.
I've added the test case from that bug and added asserts that will fail if we ever try to copy between high registers and mask registers again.
llvm-svn: 297574
Without SSE41 (pextrb) we currently extract byte elements from a vector by spilling to stack and reloading the byte.
This patch is an initial attempt at using MOVD/PEXTRW to extract the relevant DWORD/WORD from the vector and then shift+truncate to collect the correct byte.
Extraction of multiple bytes this way would result in code bloat, but as explained in the patch we could probably afford to be more aggressive with the supported extractions before again falling back on spilling - possibly through counting the number of extracts and which DWORD/WORD they originate?
Differential Revision: https://reviews.llvm.org/D29841
llvm-svn: 297568
Since v_max_f32_e64/v_max_f16_e64 can be folded if the target
instruction supports the clamp bit, we also need to maintain
modifiers when converting v_mac to v_mad.
This fixes a rendering issue with Dirt Rally because a v_mac
instruction with the clamp bit set was converted to a v_mad
but that bit was lost during the conversion.
Fixes: e184e01dd79 ("AMDGPU: Fold FP clamp as modifier bit")
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 297556
This method inverts the Reason field of a scheduling candidate.
It does right comparison between RegCritical and RegExcess, but
everything else is broken. In fact it can prefer less strong reason
such as Weak over RegCritical because Weak > -RegCritical.
The CandReason enum is properly sorted, so just remove artificial
ranking.
Differential Revision: https://reviews.llvm.org/D30557
llvm-svn: 297536
This function will find the closest ref node aliased to Reg that is
in an instruction preceding Inst. This could be used to identify the
hypothetical reaching def of Reg, if Reg was a member of Inst.
llvm-svn: 297524
This only requires a 64-bit memory source, not the whole 128-bits. But the 128-bit case is still supported via X86InstrInfo::foldMemoryOperandImpl
llvm-svn: 297523
In order to make it easier to parse information about the performance of
MacroFusion, this patch adds the function and the instruction names to the
debug output of this pass.
llvm-svn: 297504
We currently have to insert bits via a temporary variable of the same size as the target with various shift/mask stages, resulting in further temporary variables, all of which require the allocation of memory for large APInts (MaskSizeInBits > 64).
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::insertBits() helper method which avoids the temporary memory allocation and masks/inserts the raw bits directly into the target.
Differential Revision: https://reviews.llvm.org/D30780
llvm-svn: 297458
This patches teaches the MIPS backend to accept more values for constant
splats. Previously, only 10 bit signed immediates or values that could be
loaded using an ldi.[bhwd] instruction would be acceptted. This patch relaxes
that constraint so that any constant value that be splatted is accepted.
As a result, the constant pool is used less for vector operations, and the
suite of bit manipulation instructions b(clr|set|neg)i can now be used with
the full range of their immediate operand.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30640
llvm-svn: 297457
ARMISD::ADD[CE] nodes, instead of the generic ISD::ADD[CE].
Summary:
This allows for some simplification because the combines
are no longer limited to just one go at the node before
it gets legalized into an ARM target-specific one.
Reviewers: jmolloy, rogfer01
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30401
llvm-svn: 297453
same as already done for ARM and Thumb2.
Reviewers: jmolloy, rogfer01, efriedma
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30400
llvm-svn: 297443
- Fix the insertion point, which occasionally could have been incorrect.
- Avoid creating multiple bitsplits with the same operands, if an old one
could be reused.
llvm-svn: 297414
The fix introduces segfaults and clobbers the value to be stored when
the atomic sequence loops.
Revert "[Target/MIPS] Kill dead code, no functional change intended."
This reverts commit r296153.
Revert "Recommit "[mips] Fix atomic compare and swap at O0.""
This reverts commit r296134.
llvm-svn: 297380
Minor cleanup in ARMInstrVFP.td: removed some FIXMEs and added a MC test for
vcmp that was actually missing.
Differential Revision: https://reviews.llvm.org/D30745
llvm-svn: 297376
Fix a machine verifier issue where a instruction was using a invalid
register. The return pseudo is expanded and has the return address
register added to it. The return register may have been spuriously
mark as killed earlier.
This partially resolves PR/27458
Thanks to Quentin Colombet for reporting the issue!
llvm-svn: 297372
When extracting a bitfield from the high register in a register pair,
the final offset should be relative to the high register (for 32-bit
extracts).
llvm-svn: 297288
Summary: By using reg_nodbg_empty() to determine if a function can be
treated as a leaf function or not, we miss the case when the register
pair L0_L1 is used but not L0 by itself. This has the effect that
use_all_i32_regs(), a test in reserved-regs.ll which tries to use all
registers, gets treated as a leaf function.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: davide, RKSimon, sepavloff, llvm-commits
Differential Revision: https://reviews.llvm.org/D27089
llvm-svn: 297285
After inspection, it's an UB in our code base. Someone cast a var-arg
function pointer to a non-var-arg one. :/
Re-commit r296771 to continue testing on the patch.
Sorry for the trouble!
llvm-svn: 297256
This is repetition of isImage() function in NVPTXUtilities.cpp.
Patch by Briana Grace!
Differential Revision: https://reviews.llvm.org/D30706
llvm-svn: 297252
If there is only one successor, and that successor only
has one predecessor the wait can obviously be delayed until
uses or the end of the next block. This avoids code quality
regressions when there are trivial fallthrough blocks inserted
for structurization.
llvm-svn: 297251
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Broadcom Vulcan is now Cavium ThunderX2T99.
LLVM Bugzilla: http://bugs.llvm.org/show_bug.cgi?id=32113
Minor fixes for the alignments of loops and functions for
ThunderX T81/T83/T88 (better performance).
Patch was tested with SpecCPU2006.
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D30510
llvm-svn: 297190
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
Loop alignment can cause a significant change of
the perfromance for short loops.
To be able to evaluate the impact of loop alignment this change
introduces the new option x86-experimental-pref-loop-alignment.
The alignment will be 2^Value bytes, the default value is 4.
Patch by Serguei Katkov!
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D30391
llvm-svn: 297178
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
The check for LSL #0 in an IT block was checking if operand 4 was zero, but
operand 4 is the condition code operand so it was actually checking for LSLEQ.
Fix this by checking operand 3, which really is the immediate operand, and add
some tests.
Differential Revision: https://reviews.llvm.org/D30692
llvm-svn: 297142
The original patch r296865 was reverted as it broke the chromium builds for
Android https://bugs.llvm.org/show_bug.cgi?id=32134, this patch reapplies
r296865 with a fix to make sure it doesn't cause the build regression.
The problem was that intrinsic selection on int_arm_get_fpscr was failing in
ISel this was because the code to manually select this intrinsic still thought
it was the version with no side-effects (INTRINSIC_WO_CHAIN) which is wrong as
it doesn't semantically match the definition in the tablegen code which says it
does have side-effects, I've fixed this by updating the intrinsic type to
INTRINSIC_W_CHAIN (has side-effects). I've also added a test for this based on
Hans original reproducer.
Differential Revision: https://reviews.llvm.org/D30645
llvm-svn: 297137
Summary: Previously, it had always been materialized as a push/pop sequence.
Reviewers: labrinea, jroelofs
Reviewed By: jroelofs
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30648
llvm-svn: 297134
X86EvexToVex machine instruction pass compresses EVEX encoded instructions by replacing them with their identical VEX encoded instructions when possible.
It uses manually supported 2 large tables that map the EVEX instructions to their VEX ideticals.
This TableGen backend replaces the tables by automatically generating them.
Differential Revision: https://reviews.llvm.org/D30451
llvm-svn: 297127
evex2vex pass defines 2 tables which maps EVEX instructions to their VEX identical when possible. Adding all missing entries.
Differential Revision: https://reviews.llvm.org/D30501
llvm-svn: 297126
This reverts commit r296771.
We found some wide spread test failures internally. I'm working on a
testcase. Politely revert the patch in the mean time. :)
llvm-svn: 297124
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
Fixed the asan bot failure which led to the last commit of the outliner being reverted.
The change is in lib/CodeGen/MachineOutliner.cpp in the SuffixTree's constructor. LeafVector
is no longer initialized using reserve but just a standard constructor.
llvm-svn: 297081
This patch extends the current functionality of the AArch64 redundant copy
elimination pass to handle CMN instructions as well as a shifted
immediates.
Differential Revision: https://reviews.llvm.org/D30576.
llvm-svn: 297078
Use the store size of the argument type, which will be a byte-sized
quantity, rather than dividing the size in bits by 8.
Fixes PR32136 and re-enables copy elision from i64 arguments.
Reverts the workaround in from r296950.
llvm-svn: 297045
Merge the tail block into the loop in cases where the main loop body
exits early, subject to profitability constraints. This will coalesce
the loop body into fewer blocks.
For example:
loop: loop:
// loop body // loop body
if (...) jump exit --> // more body
more: if (...) jump exit
// more body jump loop
jump loop
llvm-svn: 297033
The code in updateDeadFlags removed unnecessary <dead> flags, but there
can be cases where such a flag is not set, and yet a register has become
dead. For example, if a mux with identical inputs is replaced with a COPY,
the predicate register may no longer be used after that.
llvm-svn: 297032
As described on PR31712, we miss a variety of legalization combines because we lower these to X86ISD::VSEXT/VZEXT despite them having the same functionality. This patch makes 128-bit (SSE41) SIGN/ZERO_EXTEND_VECTOR_IN_REG ops legal, adds the necessary tablegen plumbing and uses a helper 'getExtendInVec' to decide when to use SIGN/ZERO_EXTEND_VECTOR_IN_REG or VSEXT/VZEXT.
We're missing a couple of shuffle combines that will be added in a future patch for review.
Later patches can then support the AVX2 cases as a mixture of SIGN/ZERO_EXTEND and SIGN/ZERO_EXTEND_VECTOR_IN_REG, and then finally deal with the AVX512 cases.
Differential Revision: https://reviews.llvm.org/D30549
llvm-svn: 296985
The larger goal is to move the ADC/SBB transforms currently in
combineX86SetCC() to combineAddOrSubToADCOrSBB() because we're
creating ADC/SBB in lots of places where we shouldn't.
This was intended to be an NFC change, but avx-512 has something
strange going on. It doesn't seem like any of the affected tests
should really be using SET+TEST or ADC; a simple ADD could replace
several instructions. But that's another bug...
llvm-svn: 296978
select Cond, C +/- 1, C --> add(ext Cond), C -- with a target hook.
This is part of the ongoing process to obsolete D24480. The motivation is to
canonicalize to select IR in InstCombine whenever possible, so we need to have a way to
undo that easily in codegen.
PowerPC is an obvious winner for this kind of transform because it has fast and complete
bit-twiddling abilities but generally lousy conditional execution perf (although this might
have changed in recent implementations).
x86 also sees some wins, but the effect is limited because these transforms already mostly
exist in its target-specific combineSelectOfTwoConstants(). The fact that we see any x86
changes just shows that that code is a mess of special-case holes. We may be able to remove
some of that logic now.
My guess is that other targets will want to enable this hook for most cases. The likely
follow-ups would be to add value type and/or the constants themselves as parameters for the
hook. As the tests in select_const.ll show, we can transform any select-of-constants to
math/logic, but the general transform for any 2 constants needs one more instruction
(multiply or 'and').
ARM is one target that I think may not want this for most cases. I see infinite loops there
because it wants to use selects to enable conditionally executed instructions.
Differential Revision: https://reviews.llvm.org/D30537
llvm-svn: 296977
Long ago (2010 according to svn blame), combineShuffle probably needed to prevent the accidental creation of illegal i64 types but there doesn't appear to be any combines that can cause this any more as they all have their own legality checks.
Differential Revision: https://reviews.llvm.org/D30213
llvm-svn: 296966
This fixes cases where i1 types were not properly legalized yet and lead
to the creating of 0-sized stack slots.
This fixes http://llvm.org/PR32136
llvm-svn: 296950
The comments were wrong, and this is not an obvious transform.
This hopefully makes it clearer that we're missing the commuted
patterns for adds. It's less clear that this is actually a good
transform for all micro-arch.
This is prep work for trying to clean up the current adc/sbb
codegen because it's definitely not happening optimally.
llvm-svn: 296918
Added code to check constant bus restrictions for VOP formats (only one SGPR value or literal-constant may be used by the instruction).
Note that the same checks are performed by SIInstrInfo::verifyInstruction (used by lowering code).
Added LIT tests.
llvm-svn: 296873
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.
llvm-svn: 296862
VZEROUPPER should not be issued on Knights Landing (KNL), but on Skylake-avx512 it should be.
Differential Revision: https://reviews.llvm.org/D29874
llvm-svn: 296859
This is a cleanup/rewrite of the parseSysAlias function. It was not using the
tablegen instruction descriptions, but was “manually” matching the mnemonics
and recreating the operands whereas all this information is already in
tablegen; all this code has been replaced with calls to lookupXYZByName
tablegen calls.
Differential Revision: https://reviews.llvm.org/D30491
llvm-svn: 296857
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation
as LastOp.
This patch fixes some cases where we would move stores to the wrong
insert point.
Re-commit with a fix to increment NumMove in the right place.
Differential Revision: https://reviews.llvm.org/D30124
llvm-svn: 296815
This patch fixes pr32063.
Current code in PPCTargetLowering::PerformDAGCombine can transform
bswap
store
into a single PPCISD::STBRX instruction. but it doesn't consider the case that the operand size of bswap may be larger than store size. When it occurs, we need 2 modifications,
1 For the last operand of PPCISD::STBRX, we should not use DAG.getValueType(N->getOperand(1).getValueType()), instead we should use cast<StoreSDNode>(N)->getMemoryVT().
2 Before PPCISD::STBRX, we need to shift the original operand of bswap to the right side.
Differential Revision: https://reviews.llvm.org/D30362
llvm-svn: 296811
This patch extends the current functionality of the AArch64 redundant copy
elimination pass to handle non-zero cases such as:
BB#0:
cmp x0, #1
b.eq .LBB0_1
.LBB0_1:
orr x0, xzr, #0x1 ; <-- redundant copy; x0 known to hold #1.
Differential Revision: https://reviews.llvm.org/D29344
llvm-svn: 296809
This patch adds support for struct return values to the MSP430
target backend. It also reverses the order of argument and return
registers in the calling convention to bring it into closer
alignment with the published EABI from TI.
Patch by Andrew Wygle (awygle).
Differential Revision: https://reviews.llvm.org/D29069
llvm-svn: 296807
Make opcode selection code for the load instruction a bit easier
to read and maintain.
This patch also catches number of f16 load/store variants that were
not handled before.
Differential Revision: https://reviews.llvm.org/D30513
llvm-svn: 296785
MMX extraction often ends up as extract_i32(bitcast_v2i32(extract_i64(bitcast_v1i64(x86mmx v), 0)), 0) which fails to simplify on 32-bit targets as i64 isn't legal
llvm-svn: 296782
This patch reduces the stack frame size by not allocating the parameter area if
it is not required. In the current implementation LowerFormalArguments_64SVR4
already handles the parameter area, but LowerCall_64SVR4 does not
(when calculating the stack frame size). What this patch does is make
LowerCall_64SVR4 consistent with LowerFormalArguments_64SVR4.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29881
llvm-svn: 296771
The CallingConv.td rules allocate 8 bytes for these kinds of arguments
on AAPCS targets, but we were only recording the smaller amount. The
difference is theoretical on AArch64 because we don't actually store
more than the smaller amount, but it's still much better to have these
two components in agreement.
Based on Diana Picus's ARM equivalent patch (where it matters a lot
more).
llvm-svn: 296754
Valery Pykhtin