This patch simplifies LLVM's lit infrastructure by enforcing an ordering
that a site config is always run before a source-tree config.
A significant amount of the complexity from lit config files arises from
the fact that inside of a source-tree config file, we don't yet know if
the site config has been run. However it is *always* required to run
a site config first, because it passes various variables down through
CMake that the main config depends on. As a result, every config
file has to do a bunch of magic to try to reverse-engineer the location
of the site config file if they detect (heuristically) that the site
config file has not yet been run.
This patch solves the problem by emitting a mapping from source tree
config file to binary tree site config file in llvm-lit.py. Then, during
discovery when we find a config file, we check to see if we have a
target mapping for it, and if so we use that instead.
This mechanism is generic enough that it does not affect external users
of lit. They will just not have a config mapping defined, and everything
will work as normal.
On the other hand, for us it allows us to make many simplifications:
* We are guaranteed that a site config will be executed first
* Inside of a main config, we no longer have to assume that attributes
might not be present and use getattr everywhere.
* We no longer have to pass parameters such as --param llvm_site_config=<path>
on the command line.
* It is future-proof, meaning you don't have to edit llvm-lit.in to add
support for new projects.
* All of the duplicated logic of trying various fallback mechanisms of
finding a site config from the main config are now gone.
One potentially noteworthy thing that was required to implement this
change is that whereas the ninja check targets previously used the first
method to spawn lit, they now use the second. In particular, you can no
longer run lit.py against the source tree while specifying the various
`foo_site_config=<path>` parameters. Instead, you need to run
llvm-lit.py.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313270
Use os.path.normpath instead of realpath to collapse '..' and '.' path
components. Use realpath when caching search results about a path for
good measure.
I considered rigging up a test involving symlinks for this, but I doubt
I can check a symlink into SVN. The test would have to conditionally
create a symlink at runtime if the host OS supports it. This sounds too
fragile and complicated to me to be worth it.
llvm-svn: 312254
This preserves symlinks in paths, so that someone can symlink more tests
into a larger test suite. For example, debuginfo-tests is currently
designed to be checked out into clang/test. With this change, it can be
symlinked into place instead, which works better with the monorepo.
llvm-svn: 312250
It was marked as unsupported on Windows in r311230 because on some Win10
machines it failed or caused hang. The problem was that on these machines
system bash (C:\Windows\System32\bash.exe) was used which requires paths to be
passed like '/mnt/c/path/to/my/script' instead of 'C:\path\to\my\script'.
TODO: we should make lit detect if system bash is used instead of msys and set
appropriate path format.
llvm-svn: 311558
This is an updated version of https://reviews.llvm.org/D22144 by @jlpeyton.
The patch was accepted but not landed.
This is useful functionality and I would like to use this to enable lit tests for environment variable behaviour.
Differential Revision: https://reviews.llvm.org/D36403
llvm-svn: 311180
Multi-configuration CMake generators such as those for Visual Studio or Xcode do not
specify a build config at configure time, but let the user choose at build
time. In these cases binaries go into build/${Configuration}/bin rather than
build/bin. Prior to this commit, check-lit would fail when using multi-configuration
generators as it did not know how to resolve ${Configuration} in order
to find tools such as FileCheck. This commit teaches it to resolve
llvm_tools_dir within lit using the value specified with --param
build_mode.
Differential Revision: https://reviews.llvm.org/D36263
llvm-svn: 309967
Summary:
This is an alternative solution to running the lit test suite on bots
without polluting the source directory. Each input test suite gets an
auto-generated site config in the build directory that points back to
the test input source directory.
This adds some cmake comlexity, but now we don't need to remove and
re-copy the test input directory before every test.
Reviewers: delcypher, modocache
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D36026
llvm-svn: 309602
Traceback (most recent call last):
File "llvm/utils/lit/tests/Inputs/shtest-format/external_shell/write-bad-encoding.py", line 5, in <module>
sys.stdout.write(b"a line with bad encoding: \xc2.")
sys.stdout.write doesn't accept bytes but sys.stdout.buffer.write accepts.
llvm-svn: 309473
This should fix googletest-format test failures on the clang modules
buildbots, which have a stale copy of the OneTest script in the build
directory.
llvm-svn: 309432
When using win32 cmd.exe, turn off command echoing at the beginning of
the script (@echo off).
Replace a bash shell script with a python script for the
fail_with_bad_encoding test.
llvm-svn: 309399
Summary:
The technique of directly calling subprocess.Popen on a python script
doesn't work on Windows. The executable path of the command must refer
to a valid win32 executable.
Instead, rename all the python scripts masquerading as gtest executables
to have .py extensions, so we can easily detect then and call the python
executable for them. Do this on Linux as well as Windows for
consistency.
The test suite directory names also come out in lower-case on Windows.
We can consider removing that in a later patch. This change just updates
the FileCheck lines to match on Windows.
Fixes PR33933
Reviewers: modocache, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35909
llvm-svn: 309347
Summary:
Normally Python converts all newline characters, Windows or Unix,
to Unix newlines when opening a file. However, lit opens files in
binary mode, which does not perform this conversion. As a result,
trailing Windows newlines are not stripped from test input, which
caused a failure in the TestRunner unit test:
```
FAIL: test_custom (__main__.TestIntegratedTestKeywordParser)
----------------------------------------------------------------------
Traceback (most recent call last):
File "C:\Users\bgesiak\src\llvm\llvm\utils\lit\tests\unit\TestRunner.py", line 109, in test_custom
self.assertItemsEqual(value, ['a', 'b', 'c'])
AssertionError: Element counts were not equal:
First has 1, Second has 0: 'c\r'
First has 0, Second has 1: 'c'
```
Fix the discrepancy in behavior across the two platforms by
manually stripping Windows newlines before yielding each line in
the test file.
Reviewers: echristo, beanz, ddunbar, delcypher, rnk
Reviewed By: rnk
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D27746
llvm-svn: 309312
Summary:
Depends on https://reviews.llvm.org/D35879.
This reverts rL257268, which in turn was a revert of rL257221.
https://reviews.llvm.org/D35879 marks the tests in the lit test suite
that fail on Windows as XFAIL, which should allow these tests to pass
on Windows-based buildbots.
Reviewers: delcypher, beanz, mgorny, jroelofs, rnk
Reviewed By: mgorny
Subscribers: rnk, ddunbar, george.karpenkov, llvm-commits
Differential Revision: https://reviews.llvm.org/D35880
llvm-svn: 309310
Summary:
An expectation in `utils/lit/tests/Inputs/shtest-shell/redirects.txt`
expects that first a string printed to stdout is seen, and then a
string printed to stderr. Add `flush()` calls to ensure that stdout is
printed before stderr, as expected.
Reviewers: rnk, mgorny, jroelofs
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35947
llvm-svn: 309292
Rewrite the write-to-stderr.sh and write-to-stdout-and-stderr.sh shell
scripts as python scripts and call python on them.
Fixes PR33940
llvm-svn: 309200
This passes locally for me, which fails the overall lit test suite. I
can't debug a passing test, but I will try to help debug the test when
we get some failing logs.
llvm-svn: 309190
Summary:
rL257221 attempted to run lit's own test suite continuously, but that
commit was reverted because lit's test suite does not pass on Windows.
Because lit's tests do not run continuously, they often regress.
In order to un-revert rL257221, mark lit tests that fail as XFAIL for
Windows platforms.
Test Plan:
On a Windows development environment, follow the instructions in
utils/lit/README.txt to run lit's test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the test suite is run and a successful exit code is
returned.
Reviewers: mgorny, rnk, delcypher, beanz
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35879
llvm-svn: 309123
Summary:
Whereas rL299560 and rL309071 call `parallelism_groups.items()`, under the
assumption that `parallelism_groups` is a `dict` type, the default
parameter for that attribute is a `list`. Change the default to a
`dict` for type correctness.
This regression in the unit tests would have been caught if the
unit tests were being run continously. It also would have been caught
if the lit project used a Python type checker such as `mypy`.
Test Plan:
As per the instructions in `utils/lit/README.txt`, run the lit unit
test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the test `lit :: unit/TestRunner.py` fails before applying this
patch, but passes once this patch is applied.
Reviewers: mgorny, rnk, rafael
Reviewed By: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35878
llvm-svn: 309122
Summary:
This reverts rL306623, which removed `FileBasedTest`, an abstract base class,
but did not also remove the usages of that class in the lit unit tests.
The revert fixes four test failures in the lit unit test suite.
Test plan:
As per the instructions in `utils/lit/README.txt`, run the lit unit
test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the following tests fail before applying this patch, and
pass once the patch is applied:
```
lit :: test-data.py
lit :: test-output.py
lit :: xunit-output.py
```
In addition, run `check-llvm` to make sure the existing LLVM test suite
executes normally.
Reviewers: george.karpenkov, mgorny, dlj
Reviewed By: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35877
llvm-svn: 309120
Replace the incorrect variable reference when invalid redirect is used.
This fixes the following issue:
File "/usr/src/llvm/utils/lit/lit/TestRunner.py", line 316, in processRedirects
raise InternalShellError(cmd, "Unsupported redirect: %r" % (r,))
UnboundLocalError: local variable 'r' referenced before assignment
which in turn broke shtest-shell.py and max-failures.py lit tests.
The breakage was introduced during refactoring in rL307310.
Differential Revision: https://reviews.llvm.org/D35857
llvm-svn: 309044
Debugging LIT scripts can be rather painful, as LIT directly does not
specify which line has failed.
Rather, FileCheck is expected to report the failing location, but it can
be often ambiguous if multiple commands are tested against the same
prefix. This change adds a -vv option, which echoes all output.
Then detecting the error becomes straightforward: last printed line is
the failing one.
Of course, it could be desired to try to get failing line number
directly from bash, but it involves excessive hacks on older bash
versions (cf.
https://stackoverflow.com/questions/24398691/how-to-get-the-real-line-number-of-a-failing-bash-command)
Differential Revision: https://reviews.llvm.org/D35330
llvm-svn: 307938
Summary:
This speeds up the LLD test suite on Windows by 3x. Most of the time is
spent on lld/test/ELF/linkerscript/diagnostics.s, which repeatedly
constructs linker scripts with appending echo commands.
Reviewers: dlj, zturner, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35093
llvm-svn: 307668
This is especially useful when lit is invoked indirectly by the build
system, and additional arguments can not be easily specified.
Differential Revision: https://reviews.llvm.org/D35091
llvm-svn: 307339
Fix by Andrew Ng!
The Visual Studio build can contain output for multiple configuration types (
e.g. Debug, Release & RelWithDebInfo) within the same build output
directory. Therefore when discovering unit tests, the "build mode" sub directory
containing the appropriate configuration is included in the search. This sub
directory may not always be present, so a test for its existence is required.
Reviewers: zturner, modocache, dlj
Reviewed By: zturner, dlj
Subscribers: grimar, bd1976llvm, gbreynoo, edd, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D34976
llvm-svn: 307235
Summary:
The lit test formats use largely the same logic for discovering tests. There are
some superficial differences in the logic, which seem reasonable enough to
handle in a single routine.
At a high level, the common goal is "look for files that end with one of these
suffixes, and skip anything starting with a dot." The balance of the logic
specific to ShTest and GoogleTest collapses quite a bit, so that
getTestsInDirectory is only a couple of lines around a call to the new function.
Reviewers: zturner, MatzeB, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D34855
llvm-svn: 306895
This reverts commit da6318a92fba793e4f2447ec478b001392d57d43.
This is causing failures on some build bots due to what appears
to be some kind of lit ordering dependency.
llvm-svn: 306833
Presently lit leaks files in the tests' output directories.
Specifically, if a test creates output files, lit makes no
effort to remove them prior to the next test run. This is
problematic because it leads to false positives whenever a
test passes because stale files were present. In general
it is a source of flakiness that should be removed.
This patch addresses this by building the list of all test
directories that are part of the current run set, and then
deleting those directories and recreating them anew. This
gives each test a clean baseline to start from.
Differential Revision: https://reviews.llvm.org/D34732
llvm-svn: 306832
(Take 2: this patch re-applies r306625, which was reverted in r306629. This
patch includes only trivial fixes.)
In Python2 and Python3, the various (non-)?Unicode string types are sort of
spaghetti. Python2 has unicode support tacked on via the 'unicode' type, which
is distinct from 'str' (which are bytes). Python3 takes the "unicode-everywhere"
approach, with 'str' representing a Unicode string.
Both have a 'bytes' type. In Python3, it is the only way to represent raw bytes.
However, in Python2, 'bytes' is an alias for 'str'. This leads to interesting
problems when an interface requires a precise type, but has to run under both
Python2 and Python3.
The previous logic appeared to be correct in all cases, but went through more
layers of indirection than necessary. This change does the necessary conversions
in one shot, with documentation about which paths might be taken in Python2 or
Python3.
Changes from r306625: some tests just print binary outputs, so in those cases,
fall back to str() in Python3. For googletests, add one missing call to
to_string().
(Tested by verifying the visible breakage with Python3. Verified that everything
works in py2 and py3.)
llvm-svn: 306643
Summary:
In Python2 and Python3, the various (non-)?Unicode string types are sort of
spaghetti. Python2 has unicode support tacked on via the 'unicode' type, which
is distinct from 'str' (which are bytes). Python3 takes the "unicode-everywhere"
approach, with 'str' representing a Unicode string.
Both have a 'bytes' type. In Python3, it is the only way to represent raw bytes.
However, in Python2, 'bytes' is an alias for 'str'. This leads to interesting
problems when an interface requires a precise type, but has to run under both
Python2 and Python3.
The previous logic appeared to be correct in all cases, but went through more
layers of indirection than necessary. This change does the necessary conversions
in one shot, with documentation about which paths might be taken in Python2 or
Python3.
Reviewers: zturner, modocache
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D34793
llvm-svn: 306625
Summary:
This change removes the intermediate 'FileBasedTest' format from lit. This
format is only ever used by the ShTest format, so the logic can be moved into
ShTest directly.
In order to better clarify what the TestFormat subclasses do, I fleshed out the
TestFormat base class with Python's notion of abstract methods, using
@abc.abstractmethod. This gives a convenient way to document the expected
interface, without the risk of instantiating an abstract class (that's what
ABCMeta does -- it raises an exception if you try to instantiate a class which
has abstract methods, but not if you instantiate a subclass that implements
them).
Reviewers: zturner, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D34792
llvm-svn: 306623
Summary:
The dead code seems to be unreferenced, according to textual search across the
LLVM SVN repo.
The clarification part of this change alters the name of a module-level function
so that it is different from the name of the class-methods that call it.
Currently, there are no erroneous references, but stylistically (c.f. PEP-8),
internal "helper" functions should generally be named accordingly by prepending
an underscore. (I also chose to add '_impl', which isn't necessary, but helps me
at least to mentally disambiguate the interface and implementation functions.)
Reviewers: zturner, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D34775
llvm-svn: 306600
on macOS
This function will be used to tie Clang's Integeration tests to a particular
SDK version. See https://reviews.llvm.org/D32178 for more context.
llvm-svn: 304541
Summary:
For various clang analyzer tests, which were unsupported, I got lit
exceptions, similar to the following:
Exception during script execution:
Traceback (most recent call last):
File "utils/lit/lit/run.py", line 190, in execute_test
result = test.config.test_format.execute(test, lit_config)
File "tools/clang/test/Analysis/analyzer_test.py", line 11, in execute
if result.code == lit.Test.FAIL:
AttributeError: 'tuple' object has no attribute 'code'
This is because executeShTest() in utils/lit/lit/TestRunner.py is
supposed to return a lit.Test.Result object, but in case of unsupported
tests, it returns a plain tuple.
Fix this by returning a properly initialized lit.Test.Result object
instead.
Reviewers: rnk, rafael, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33579
llvm-svn: 303943
This seems to have been present since the beginning of time,
which is quite surprising. The symptom was this: Suppose you
have a test with a run line that looks like this:
RUN: foo | FileCheck %s
foo prints some output and then due to a bug in the program it
asserts. On Windows this results in the program returning a
negative exit code. But if enough output had been printed
already by the tool so that the FileCheck match would succeed
then FileCheck would return 0, and because of bad logic in
lit this 0 return value would overwrite the failed return
value from previous items in the pipeline. This only happened
with negative exit codes.
The most sensible behavior is to just take whatever the first
exit code is. There is no logical ordering defined on exit
codes, so comparing with < and > does not make a lot of sense.
Instead, as soon as we find the first non-successful return
value, that should be the result of the entire expression.
This fixes the issue, as now tests which fail on non-Windows
platforms also fail for me on Windows as well.
llvm-svn: 303440
If all jobs complete successfully, use pool.close() instead of
pool.terminate() before waiting for the workers. Zach Turner reported
that he was getting "access denied" exceptions from pool.terminate().
Make the workers abort immediately without printing to stderr when they
are interrupted.
Finally, catch exceptions when attempting to remove our temporary
testing directory. On abnormal exit, there can often be open handles
that haven't been cleaned up yet.
llvm-svn: 301941
Both pickling errors encountered on clang bots and Darwin compiler-rt
should now be fixed.
This has no impact on testing time on Linux, and on Windows goes from
88s to 63s for 'check'. The tests pass on Mac, but I haven't compared
execution time.
llvm-svn: 299775
This is necessary to pass the lit test suite at llvm/utils/lit/tests.
There are some pre-existing failures here, but now switching to pools
doesn't regress any tests.
I had to change test-data/lit.cfg to import DummyConfig from a module to
fix pickling problems, but I think it'll be OK if we require test
formats to be written in real .py modules outside lit.cfg files.
I also discovered that in some circumstances AsyncResult.wait() will not
raise KeyboardInterrupt in a timely manner, but you can pass a non-zero
timeout to work around this. This makes threading.Condition.wait use a
polling loop that runs through the interpreter, so it's capable of
asynchronously raising KeyboardInterrupt.
llvm-svn: 299605
Summary:
This drastically reduces lit test execution startup time on Windows. Our
previous strategy was to manually create one Process per job and manage
the worker pool ourselves. Instead, let's use the worker pool provided
by multiprocessing. multiprocessing.Pool(jobs) returns almost
immediately, and initializes the appropriate number of workers, so they
can all start executing tests immediately. This avoids the ramp-up
period that the old implementation suffers from. This appears to speed
up small test runs.
Here are some timings of the llvm-readobj tests on Windows using the
various execution strategies:
# multiprocessing.Pool:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-process-pool |& grep real: ; done
real: 0m1.156s
real: 0m1.078s
real: 0m1.094s
# multiprocessing.Process:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-processes |& grep real: ; done
real: 0m6.062s
real: 0m5.860s
real: 0m5.984s
# threading.Thread:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-threads |& grep real: ; done
real: 0m9.438s
real: 0m10.765s
real: 0m11.079s
I kept the old code to launch processes in case this change doesn't work
on all platforms that LLVM supports, but at some point I would like to
remove both the threading and old multiprocessing execution strategies.
Reviewers: modocache, rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31677
llvm-svn: 299560
This is needed by TestCases/Posix/coverage-direct.cc
The problem is that the test does:
mkdir <dir>
cd <dir>
cd ..
rm -rf <dir>
<more commands>
the current directory currently looks like "/.../<dir>/../" which
doesn't exist when dir is deleted.
at some point we should probably switch to using the os current
directory (specially if we want to add subshell), but this is a small
incremental improvement.
llvm-svn: 299113
This adds support for commands like
FileCheck < foobar*
which is used by some asan tests because the file they want to read
has a pid in the name.
llvm-svn: 299111
Summary:
`assert.assertItemEqual` went away in Python 3. Seeing how lists
are ordered, comparing a list against each other should work just
as well.
Patch by @jbergstroem (Johan Bergström).
Reviewers: modocache, gparker42
Reviewed By: modocache
Differential Revision: https://reviews.llvm.org/D31229
llvm-svn: 298479
This will enable removing hacks throughout the codebase
in clang and compiler-rt that feed multiple inputs to a
testing utility by globbing, all of which are either disabled
on Windows currently or using xargs / find hacks.
Differential Revision: https://reviews.llvm.org/D30380
llvm-svn: 296904
and UNSUPPORTED"
After r292904 llvm-lit fails to emit the test results in the XML format for
Apple's internal buildbots.
rdar://30164800
llvm-svn: 292942
A `lit` condition line is now a comma-separated list of boolean expressions.
Comma-separated expressions act as if each expression were on its own
condition line:
For REQUIRES, if every expression is true then the test will run.
For UNSUPPORTED, if every expression is false then the test will run.
For XFAIL, if every expression is false then the test is expected to succeed.
As a special case "XFAIL: *" expects the test to fail.
Examples:
# Test is expected fail on 64-bit Apple simulators and pass everywhere else
XFAIL: x86_64 && apple && !macosx
# Test is unsupported on Windows and on non-Ubuntu Linux
# and supported everywhere else
UNSUPPORTED: linux && !ubuntu, system-windows
Syntax:
* '&&', '||', '!', '(', ')'. 'true' is true. 'false' is false.
* Each test feature is a true identifier.
* Substrings of the target triple are true identifiers for UNSUPPORTED
and XFAIL, but not for REQUIRES. (This matches the current behavior.)
* All other identifiers are false.
* Identifiers are [-+=._a-zA-Z0-9]+
Differential Revision: https://reviews.llvm.org/D18185
llvm-svn: 292904
A `lit` condition line is now a comma-separated list of boolean expressions.
Comma-separated expressions act as if each expression were on its own
condition line:
For REQUIRES, if every expression is true then the test will run.
For UNSUPPORTED, if every expression is false then the test will run.
For XFAIL, if every expression is false then the test is expected to succeed.
As a special case "XFAIL: *" expects the test to fail.
Examples:
# Test is expected fail on 64-bit Apple simulators and pass everywhere else
XFAIL: x86_64 && apple && !macosx
# Test is unsupported on Windows and on non-Ubuntu Linux
# and supported everywhere else
UNSUPPORTED: linux && !ubuntu, system-windows
Syntax:
* '&&', '||', '!', '(', ')'. 'true' is true. 'false' is false.
* Each test feature is a true identifier.
* Substrings of the target triple are true identifiers for UNSUPPORTED
and XFAIL, but not for REQUIRES. (This matches the current behavior.)
* All other identifiers are false.
* Identifiers are [-+=._a-zA-Z0-9]+
Differential Revision: https://reviews.llvm.org/D18185
llvm-svn: 292896
Running lit tests and unit tests of ASan and TSan on macOS has very bad performance when running with a high number of threads. This is caused by xnu (the macOS kernel), which currently doesn't handle mapping and unmapping of sanitizer shadow regions (reserved VM which are several terabytes large) very well. The situation is so bad that increasing the number of threads actually makes the total testing time larger. The macOS buildbots are affected by this. Note that we can't easily limit the number of sanitizer testing threads without affecting the rest of the tests.
This patch adds a special "group" into lit, and limits the number of concurrently running tests in this group. This helps solve the contention problem, while still allowing other tests to run in full, that means running lit with -j8 will still with 8 threads, and parallelism is only limited in sanitizer tests.
Differential Revision: https://reviews.llvm.org/D28420
llvm-svn: 292548
Summary:
This change equips lit.py with two new options, --num-shards=M and
--run-shard=N (set by default from env vars LIT_NUM_SHARDS and LIT_RUN_SHARD).
The options must be used together, and N must be in 1..M.
Together these options effect only test selection: they partition the testsuite
into M equal-sized "shards", then select only the Nth shard. They can be used
in a cluster of test machines to achieve a very crude (static) form of
parallelism, with minimal configuration work.
Reviewers: modocache, ddunbar
Reviewed By: ddunbar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28789
llvm-svn: 292417
Summary: The parameter `input` to `subprocess.Popen.communicate(...)` must be an object of type `bytes` . This is strictly enforced in python3. This patch (1) allows `to_bytes` to be safely called redundantly. (2) Explicitly convert `input` within `executeCommand`. This allows for usages like `executeCommand(['clang++', '-'], input='int main() {}\n')`.
Reviewers: ddunbar, BinaryKhaos, modocache, dim, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28736
llvm-svn: 292308
Running lit tests and unit tests of ASan and TSan on macOS has very bad performance when running with a high number of threads. This is caused by xnu (the macOS kernel), which currently doesn't handle mapping and unmapping of sanitizer shadow regions (reserved VM which are several terabytes large) very well. The situation is so bad that increasing the number of threads actually makes the total testing time larger. The macOS buildbots are affected by this. Note that we can't easily limit the number of sanitizer testing threads without affecting the rest of the tests.
This patch adds a special "group" into lit, and limits the number of concurrently running tests in this group. This helps solve the contention problem, while still allowing other tests to run in full, that means running lit with -j8 will still with 8 threads, and parallelism is only limited in sanitizer tests.
Differential Revision: https://reviews.llvm.org/D28420
llvm-svn: 292231
This required re-working the streaming support and lit's support for
'--gtest_list_tests' but otherwise seems to be a clean upgrade.
Differential Revision: https://reviews.llvm.org/D28154
llvm-svn: 291029
Summary:
Libc++ frequently has the need to parse more than just the builtin *test keywords* (`RUN`, `REQUIRES`, `XFAIL`, ect). For example libc++ currently needs a new keyword `MODULES-DEFINES: macro list...`. Instead of re-implementing the script parsing in libc++ this patch allows `parseIntegratedTestScript` to take custom parsers.
This patch introduces a new class `IntegratedTestKeywordParser` which implements the logic to parse/process a test keyword. Parsing of various keyword "kinds" are supported out of the box, including 'TAG', 'COMMAND', and 'LIST', which parse keywords such as `END.`, `RUN:` and `XFAIL:` respectively.
As an example after this change libc++ can implement the `MODULES-DEFINES` simply using:
```
mparser = IntegratedTestKeywordParser('MODULES-DEFINES:', ParserKind.LIST)
parseIntegratedTestScript(test, additional_parsers=[mparser])
macro_list = mparser.getValue()
```
Reviewers: ddunbar, modocache, rnk, danalbert, jroelofs
Subscribers: mgrang, llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D27005
llvm-svn: 288694
This shouls now be safe and not break any more bots. It's strictly better to use '--sdk macosx', otherwise xcrun can return weird things for example when you have Command Line Tools or the SDK installed into '/'.
llvm-svn: 288385
This reverts commit r287403. It breaks an internal asan bot. According
to Kuba, a fix is up for review here: https://reviews.llvm.org/D26929
llvm-svn: 287804
Summary:
This will allow us to revert LLD r284768, which added spaces to get MSys
echo to print what we want.
Reviewers: ruiu, inglorion, rafael
Subscribers: modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26009
llvm-svn: 285237
Summary:
r283710 introduced two regressions, one to llvm-lit, and the other to
lit executables that were installed via setuptools. Add instructions on
how to test for these regressions in the future.
Reviewers: ddunbar, delcypher, beanz, chapuni, cmatthews, echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25459
llvm-svn: 284919
Update the CHECK lines in the shtest-timeout.py lit test to account for
the current output. The output has been changed in r271610 without
adjusting the tests.
Differential Revision: https://reviews.llvm.org/D25236
llvm-svn: 284057
Summary:
The Python file `utils/lit/lit/ShUtil.py` contains:
1. Logic used by lit itself
2. A set of unit tests for that logic, which can be run by invoking
`python utils/lit/lit/ShUtil.py`
Move these unit tests to a `tests/unit` subdirectory of lit, and run
the tests as part of lit's test suite. This ensures that, should the
lit test suite be included in LLVM's own regression test suite, these
unit tests will also be run.
(Instructions on how to run lit's test suite can be found in
`utils/lit/README.txt`.)
Reviewers: ddunbar, echristo, delcypher, beanz
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25411
llvm-svn: 283968
Summary:
Using Python linter flake8 on the utils/lit reveals several linter
warnings designated "F401: Unused import". Fix or silence these
warnings.
Some of these unused imports are legitimate, while some are part of lit's API.
For example, users of lit expect to be able to access `lit.formats.ShTest` in
their `lit.cfg`, despite the module hierarchy for that symbol actually being
`lit.formats.shtest.ShTest`. To silence linter errors for these lines,
include a "noqa" directive.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25407
llvm-svn: 283710
Summary:
`TestingProgressDisplay` initializes its `current` attribute to `None`, but
never reads or writes the value again. Remove it.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25415
llvm-svn: 283709
Summary:
`ArgumentError` is not defined by the Python standard library.
Executing this line of code would throw a exception, but not the
intended one. It would throw a `NameError` exception, since `ArgumentError`
is undefined.
Use `ValueError` instead, which is defined by the Python standard
library.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25410
llvm-svn: 283708
Summary:
Semicolons aren't necessary as statement terminators in Python, and
each of these uses are superfluous as they appear at the end of a line.
The convention is to not use semicolons where not needed, so remove them.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25409
llvm-svn: 283707
Summary: `prefix` is written to but never read.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25408
llvm-svn: 283706
Summary:
The minimum version of Python required to run LLVM's test suite is 2.7.
Remove a workaround for older Python versions.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25400
llvm-svn: 283705
Summary:
The minimum version of Python necessary to run the LLVM test suite is
2.7. Code to work around Python 2.5 and lower isn't necessary.
Reviewers: ddunbar, echristo, delcypher, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25209
llvm-svn: 283169
Summary:
optparse is deprecated in Python 2.7, which is the minimum version of
Python required to run the LLVM test suite. Replace its usage in lit
with argparse, optparse's 2.7 replacement module.
argparse has several benefits over optparse, but this commit does not
make use of those benefits yet. Instead, it simply uses the new API,
and attempts to keep the number of changes to a minimum.
Confirmed that lit's test suite, as well as LLVM's regression test suite,
still pass with these changes.
Patch By Brian Gesiak!
Reviewers: ddunbar, echristo, beanz, delcypher
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25173
llvm-svn: 283152
Summary:
lit's `OneCommandFileTest` class implements an abstract method that
raises if called. However, it raises by referencing an undefined
symbol. Instead, raise explicitly by throwing a `NotImplementedError`.
This is clearer, and appeases Python linters.
Patch By Brian Gesiak!
Reviewers: ddunbar, echristo, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25170
llvm-svn: 283090
Summary:
In Python, `None` is a singleton, so checking whether a variable is
`None` may be done with `is` or `is not`. This has a slight advantage
over equiality comparisons `== None` and `!= None`, since `__eq__` may
be overridden in Python to produce sometimes unexpected results.
Using `is None` and `is not None` is also recommended practice in
https://www.python.org/dev/peps/pep-0008:
> Comparisons to singletons like `None` should always be done with `is` or
> `is not`, never the equality operators.
Patch by Brian Gesiak!
Reviewers: ddunbar, echristo, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25168
llvm-svn: 283088
- This is primarily useful as a "fail fast" mode for lit, where it will stop
running tests after the first failure.
- Patch by Max Moiseev.
llvm-svn: 282452
Lots of unittests started failing under asan after r280455. It seems
they've been failing for a long time, but lit silently ignored them.
Downgrade the error so we can figure out what is going on.
Filed http://llvm.org/PR30285.
llvm-svn: 280674
Summary:
This is a follow up to r280455, where a check for the process exit code
was introduced. Some ASAN bots throw this error now, but it's impossible
to understand what's wrong with them, and the issue is not reproducible.
Reviewers: vitalybuka
Differential Revision: https://reviews.llvm.org/D24210
llvm-svn: 280550
Do this by creating a temp directory in the normal system temp
directory, and cleaning it up on exit.
It is still possible for this temp directory to leak if Python exits
abnormally, but this is probably good enough for now.
Fixes PR18335
llvm-svn: 280501
googletest formatted tests are discovered by running the test executable.
Previously testing would silently succeed if the test executable crashed
during the discovery process. Now testing fails with "error: unable to
discover google-tests ..." if the test executable exits with a non-zero status.
llvm-svn: 280455
Apparently nobody evaluated multiprocessing on Windows since Daniel
enabled multiprocessing on Unix in r193279. It works so far as I can
tell.
Today this is worth about an 8x speedup (631.29s to 73.25s) on my 24
core Windows machine. Hopefully this will improve Windows buildbot cycle
time, where currently it takes more time to run check-all than it does
to self-host with assertions enabled:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/20
build stage 2 ninja all ( 28 mins, 22 secs )
ninja check 2 stage 2 ( 37 mins, 38 secs )
llvm-svn: 280382
This variable is used by ASan (and other sanitizers in the future)
on s390x-linux to override a check for CVE-2016-2143 in the running
kernel (see revision 267747 on compiler-rt). Since the check simply
checks if the kernel version is in a whitelist of known-good versions,
it may miss distribution kernels, or manually-patched kernels - hence
the need for this variable. To enable running the ASan testsuite on
such kernels, this variable should be passed from the environment
down to the testcases.
Differential Revision: http://reviews.llvm.org/D19888
llvm-svn: 273825
- The intended use of this was just in diagnostics, so we shouldn't pay the
cost of reading these all the time.
- This will avoid including the full output of each command in tests which
fail, but the most important use case for this was to gather the output of
the specific command which failed.
llvm-svn: 272365
Use os.devnull instead of tempfiles when substituting '/dev/null' on
Windows machines. This should make the bots just a bit speedier.
Thanks to Yunzhong Gao for testing this patch on Windows!
Differential Revision: http://reviews.llvm.org/D20549
llvm-svn: 272290
- This will cause lit to automatically include the first 1K of data in
redirected output files when a command fails (previously if the command
failed, but the main point of the test was, say, a `FileCheck` later on, then
the log wasn't helpful in showing why the command failed).
llvm-svn: 272021
- This only applies to scripts executed by the _internal_ shell script
interpreter.
- This patch reworks the log to look more like a shell transcript, and be less
verbose (but in the interest of calling attention to the important parts).
Here is an example of the new format, for commands with/without failures and
with/without output:
```
$ true
$ echo hi
hi
$ false
note: command had no output on stdout or stderr
error: command failed with exit status 1
```
llvm-svn: 271610
Summary:
This patch adds a "REQUIRES-ANY" feature test that is disjunctive. This marks a test as `UNSUPPORTED` if none of the specified features are available.
Libc++ has the need to write feature test such as `// REQUIRES-ANY: c++98, c++03` when testing of behavior that is specific to older dialects but has since changed.
Reviewers: rnk, ddunbar
Subscribers: ddunbar, probinson, llvm-commits, cfe-commits
Differential Revision: http://reviews.llvm.org/D20757
llvm-svn: 271468
Summary:
We need these variables to concatenate two absolute paths to construct
a valid path. Currently, %t\%t is, for example, expanded to C:\foo\C:\foo,
which is not a valid path because ":" is not a valid path character
on Windows. With this patch, %t will be expanded to C\foo.
Differential Revision: http://reviews.llvm.org/D19757
llvm-svn: 268168
Summary:
Upstream googletest prints "Running main() from gtest_main.cc" to stdout prior
to running tests. LLVM removed that print statement in r61540. If a user were
to use lit to run tests that use upstream googletest, however, lit
reports "Running main()" as an invalid test name.
To avoid such a failure, add an extra conditional to `formats/googletest.py`.
Also add tests to demonstrate the modified behavior.
Reviewers: abdulras, ddunbar
Subscribers: ddunbar, llvm-commits, kastiglione
Differential Revision: http://reviews.llvm.org/D18606
llvm-svn: 265034
Summary:
The multiprocessing.Queue.put() call can hang if we try queueing all the
tests before starting to take them out of the queue.
The current implementation hangs if tests exceed 2^^15, on Mac OS X.
This might happen with a ninja check-all if one has a bunch of llvm
projects.
Reviewers: delcypher, bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17609
llvm-svn: 263731
This lets us for example start running the unit test suite early. For
'check-llvm' on my machine, this drops the tim e from 44s to 32s!!!!!
It's pretty ugly. I barely know how to write Python, so feel free to
just tell me how I should write it instead. =D Thanks to Filipe and
others for help.
Differential Revision: http://reviews.llvm.org/D18089
llvm-svn: 263329
Fix the lit bug that enabled this "feature" (empty triple is substring
of all possible target triples) and change the two outliers to use the
documented * syntax.
llvm-svn: 259799
If a lit test has a RUN line that includes a redirection to "/dev/tty", the
redirection goes to the special device file corresponding to the console. It
is /dev/tty on UNIX-like systems and "CON" on Windows.
This patch is needed to implement a test like PR25717 (caused by the size limit
of the Windows system call WriteConsole() prior to Windows 8) where the test
only breaks when outputing to the console and won't fail if using a pipe.
llvm-svn: 258898
is < ``2.0``.
Older versions of psutil (e.g. ``1.2.1`` which is the version shipped with
Ubuntu 14.04) use a different API for retrieving the child processes.
To handle this try the new API first and if that fails try the old API.
llvm-svn: 257616
This reverts r257221.
This caused several build bot failures
* It looks like some of the tests don't work correctly under Windows
* It looks like the lit per test timeout tests fail
So I'm reverting for now. Once the above failures are fixed running
lit's tests can be enabled again.
llvm-svn: 257268
directy with ``make check-lit`` and are run as part of
``make check-all``.
In principle we should run lit's testsuite before testing LLVM using lit
so that any problems with lit get discovered before testing LLVM so we
can bail out early. However this implementation (``check-all`` runs all
tests together) seemed simpler and will still report failing lit tests.
Note that the tests and the configured ``lit.site.cfg`` have to be
copied into the build directory to avoid polluting the source tree.
llvm-svn: 257221
This should work with ShTest (executed externally or internally) and GTest
test formats.
To set the timeout a new option ``--timeout=`` has
been added which specifies the maximum run time of an individual test
in seconds. By default this 0 which causes no timeout to be enforced.
The timeout can also be set from a lit configuration file by modifying
the ``lit_config.maxIndividualTestTime`` property.
To implement a timeout we now require the psutil Python module if a
timeout is requested. This dependency is confined to the newly added
``lit.util.killProcessAndChildren()``. A note has been added into the
TODO document describing how we can remove the dependency on the
``pustil`` module in the future. It would be nice to remove this
immediately but that is a lot more work and Daniel Dunbar believes it is
better that we get a working implementation first and then improve it.
To avoid breaking the existing behaviour the psutil module will not be
imported if no timeout is requested.
The included testcases are derived from test cases provided by
Jonathan Roelofs which were in an previous attempt to add a per test
timeout to lit (http://reviews.llvm.org/D6584). Thanks Jonathan!
Reviewers: ddunbar, jroelofs, cmatthews, MatzeB
Subscribers: cmatthews, llvm-commits
Differential Revision: http://reviews.llvm.org/D14706
llvm-svn: 256471
the script when running a ShTest with an external or internal shell.
This bug is caused by use of the ``map`` function in Python 3 which
returns an iterable (rather than a list in Python 2). After the iterable
is exhausted it won't return any more output and consequently when
``_runShTest()`` tries to access the ``script`` which has already been
iterated over it is empty. Converting to a list immediatley after
calling ``map()`` fixes this.
This fixes the ``tests/shtest-format.py`` test when running under
Python3 which was previously failing.
llvm-svn: 253556
instead of executable if the argument was found inside a directory
contained in PATH.
An example where this could cause a problem is if there was a RUN line
that ran the ``test`` command and if the user had a directory in their
PATH that contained a directory called ``test/`` (that occured before
``/usr/bin/``). Lit would try to use the directory as the executable
which would fail with the rather cryptic message.
```
Could not create process due to [Errno 13] Permission denied
```
llvm-svn: 253031
The existing -v option only displays commands and outputs for failed
tests, the newly introduced -a displays it for all executed tests.
llvm-svn: 251806
It is common to have a default soft process limit, at least on some families of
Linux distributions, of 1024. This is normally more than enough, but if you
have many cores, and you're running tests that create many threads, this can
become a problem. My POWER7 development machine has 48 cores, and when running
the lld regression tests, which often want to create up to 48 threads, I run
into problems. lit, by default, will want to run 48 tests in parallel, and
48*48 < 1024, and so many tests fail like this:
terminate called after throwing an instance of 'std::system_error'
what(): Resource temporarily unavailable
or lit fails like this when launching a test:
OSError: [Errno 11] Resource temporarily unavailable
lit can easily detect this situation and attempt to repair it before launching
tests (by raising the soft process limit to something that will allow ncpus^2
threads to be created), and should do so to prevent spurious test failures.
This is the follow-up to this thread:
http://lists.llvm.org/pipermail/llvm-dev/2015-October/090942.html
llvm-svn: 249161
The variable is actually called ANDROID_SERIAL.
This was not exercised on the bots until today.
Should fix the sanitizer-x86_64-linux failures.
llvm-svn: 246898
The plan is to use this for the sanitizer test suite on Windows. See
PR24554 for more details on why we need this.
Tested manually by injecting rand() into a sanitizer test and watching
what it does.
llvm-svn: 246704
My theory is that somehow Python's refcounting and GC strategy isn't
closing the subprocess handle in a timely fashion. This accesses the
private '_handle' field of the Popen object, but I see no other way to
do this. If this doesn't address the problem on the sanitizer-windows
buildbot, we can revert this change. If it does, then let's keep the
hack.
llvm-svn: 245946
This was affecting test/asan/TestCases/Windows/coverage-basic.cc in
compiler-rt. It does something like:
cd %T/mydir
%clang %s -o t.exe
./t.exe
Previously, we'd end up looking for t.exe relative to the cwd of the lit
process, not the cwd of the test.
llvm-svn: 242941
The MSys 2 version of 'env' cannot be used to set 'TZ' in the
environment due to some portability hacks in the process spawning
compatibility layer[1]. This affects test/Object/archive-toc.test, which
tries to set TZ in the environment.
Other than that, this saves a subprocess invocation of a small unix
utility, which is makes the tests faster.
The internal shell does not support shell variable expansion, so this
idiom in the ASan tests isn't supported yet:
RUN: env ASAN_OPTIONS=$ASAN_OPTIONS:opt=1 ...
[1] https://github.com/Alexpux/MSYS2-packages/issues/294
Differential Revision: http://reviews.llvm.org/D11350
llvm-svn: 242696
Summary: This patch allows executeCommand to pass a string to the processes stdin.
Reviewers: ddunbar, jroelofs
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11332
llvm-svn: 242631
Pass ADB and ADB_SERIAL environment variables to lit tests.
This would allow running Android tests in compiler-rt when
there is more than one device attached to the host.
llvm-svn: 240459
Summary:
I spend some time trying to get the LIT test suite passing. Here are the changes that I needed to make on my machine.
I made the following changes for the following reasons.
1. google-test.py: The Google test format now checks for "[ PASSED ] 1 test." to check if a test passes.
2. discovery.py: The output appears in a different order on my machine than it did in the test.
3. unittest-adaptor.py: The output appears in a different order on my machine than it did in the test.
4. The classname is now formed differently in `getJUnitXML(...)`.
I'm not sure what is causing the output order to differ in discovery.py and unittest-adaptor.py. Does anybody have any thoughts?
Reviewers: ddunbar, danalbert, jroelofs
Reviewed By: jroelofs
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9864
llvm-svn: 239663
By setting limit_to_features to a non empty list of features a configuration can
restrict the set of tests to run to only include tests that require a feature in
this list.
rdar://21082253
llvm-svn: 238766
These changes allow usages where you want to pass an additional
commandline option to all invocations of a specific llvm tool. Example:
> llvm-lit -Dllc=llc -enable-misched -verify-machineinstrs
Differential Revision: http://reviews.llvm.org/D9487
llvm-svn: 236461
The sanitizer test suite uses this idiom to disable a test. Now that we
actually check if a test ran after invoking it, we see that zero tests
ran, and complain.
Instead, ignore tests starting with DISABLED_ completely. Fixes the
sanitizer test suite failures on Windows.
llvm-svn: 234247
The '/' character in the test name of a type-parameterized test is not a
path separator, and should not be '\' on Windows. We were passing a test
name to --gtest_filter which found no tests, so the exit code was zero,
indicating a passed test.
This bug has been here since r84387 in 2009, when Jeff Yasskin added the
original lit support for type-paratermized tests. Somewhere along the
line some of the ValueMapTests started failing, but we can fix those
separately.
llvm-svn: 234242
The internal shell was already threading around a 'cwd' parameter. We
just have to make it mutable so that we can update it as the test script
executes.
If the shell ever grows support for environment variable substitution,
we could also implement support for export.
llvm-svn: 231017
Summary: I think this is probably a bug, but I'm putting this up for review just to be sure. I think that `lit.util.capture` should decode the resulting string in the same way `lit.util.executeCommand` does.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6769
llvm-svn: 225681
Summary:
The following types can be encoded and decoded by the json library:
`dict`, `list`, `tuple`, `str`, `unicode`, `int`, `long`, `float`, `bool`, `NoneType`.
`JSONMetricValue` can be constructed with any of these types, and used as part of Test.Result.
This patch also adds a toMetricValue function that converts a value into a MetricValue.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits, llvm-commits
Differential Revision: http://reviews.llvm.org/D6576
llvm-svn: 224628
We were already requiring 2.5, which meant that people on old linux distros
had to upgrade anyway.
Requiring python 2.6 will make supporting 3.X easier as we can use the 3.X
exception syntax.
According to the discussion on llvmdev, there is not much value is requiring
just 2.6, we may as well just require 2.7.
llvm-svn: 224129
Summary:
This patch gives me just enough to leverage the existing functionality in `TestRunner` for use in `libc++` and `libc++abi` .
It does the following:
* Adds the `UNSUPPORTED` tag to `TestRunner.parseIntegratedTestScript`.
* Allows `parseIntegratedTestScript` to return an empty script if a script is not required by the caller.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits, llvm-commits
Differential Revision: http://reviews.llvm.org/D6589
llvm-svn: 223915
--xunit-xml-output saves test results to disk in JUnit's xml format. This will allow Jenkins to report the details of a lit run.
Based on a patch by David Chisnall.
llvm-svn: 223163
execution of a shell command. This can happen for example if the
``RUN:`` line calls a python script which can work correctly under
Linux/OSX but will not work under Windows. A more useful error message
is now shown rather than an unhelpful backtrace.
llvm-svn: 220227
This code is based on the existing LLVM Go bindings project hosted at:
https://github.com/go-llvm/llvm
Note that all contributors to the gollvm project have agreed to relicense
their changes under the LLVM license and submit them to the LLVM project.
Differential Revision: http://reviews.llvm.org/D5684
llvm-svn: 219976
As far as I can tell UTF-8 has been supported since the beginning of Python's
codec support, and it's the de facto standard for text these days, at least
for primarily-English text. This allows us to put Unicode into lit RUN lines.
rdar://problem/18311663
llvm-svn: 217688
Summary:
This patch changes the way xfail and unsupported tests are displayed.
This output is only displayed when the --show-unsupported/--show-xfail flags are passed to lit.
Currently xfail/unsupported tests are printed during the run of the test-suite. I think its better to display this information during the summary instead.
This patch removes the printing of these tests from when they are run to the summary.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4842
llvm-svn: 215809
Summary:
This patch add a --show-xfail flag. If this flag is specified then each xfail test will be printed to output.
When it is not given xfail tests are ignored. Ignoring xfail tests is the current behavior.
This flag is meant to mirror the --show-unsupported flag that was recently added.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4750
llvm-svn: 214609
Zachary Turner