ELF for the 64-bit Arm Architecture defines two processor-specific dynamic
tags:
DT_AARCH64_BTI_PLT 0x70000001, d_val
DT_AARCH64_PAC_PLT 0x70000003, d_val
These presence of these tags indicate that PLT sequences have been
protected using Branch Target Identification and Pointer Authentication
respectively. The presence of both indicates that the PLT sequences have
been protected with both Branch Target Identification and Pointer
Authentication.
This patch adds the tags and tests for llvm-readobj and yaml2obj.
As some of the processor specific dynamic tags overlap, this patch splits
them up, keeping their original default value if they were not previously
mentioned explicitly in a switch case.
Differential Revision: https://reviews.llvm.org/D62596
llvm-svn: 362493
ELF for the 64-bit Arm Architecture defines a processor specific property
type GNU_PROPERTY_AARCH64_FEATURE_1_AND as GNU_PROPERTY_LOPROC. This
property works in a similar way to the existing X86 processor specific
property GNU_PROPERTY_GNU_X86_FEATURE_1_AND.
Two feature bits are defined for GNU_PROPERTY_AARCH64_FEATURE_1_AND:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI 0x1
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC 0x2
This patch defines the property, feature bits and implements support for
printing in llvm-readobj.
Differential Revision: https://reviews.llvm.org/D62595
llvm-svn: 362490
BB failed:
http://lab.llvm.org:8011/builders/clang-armv7-linux-build-cache/builds/15062/steps/build%20stage%201/logs/stdio
Error was:
/home/buildslave/buildslave/clang-armv7-linux-build-cache/llvm/tools/llvm-readobj/ELFDumper.cpp:3540:7:
error: non-constant-expression cannot be narrowed from type 'llvm::support::detail::packed_endian_specific_integral<unsigned long long,
llvm::support::endianness::little, 1>::value_type' (aka 'unsigned long long') to 'size_t' (aka 'unsigned int') in initializer list [-Wc++11-narrowing]
StrTabSec->sh_size};
llvm-svn: 362084
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361943
This is how multi-partition combined output files are going to look. If we
see multiple sections, the tools will just read the first one.
Differential Revision: https://reviews.llvm.org/D62349
llvm-svn: 361869
Summary:
This patch implement parsing symbol table for xcoffobjfile and
output as yaml format. Parsing auxiliary entries of a symbol
will be in a separate patch.
The XCOFF object file (aix_xcoff.o) used in the test comes from
-bash-4.2$ cat test.c
extern int i;
extern int TestforXcoff;
int main()
{
i++;
TestforXcoff--;
}
Patch by DiggerLin
Reviewers: sfertile, hubert.reinterpretcast, MaskRay, daltenty
Differential Revision: https://reviews.llvm.org/D61532
llvm-svn: 361832
They were failing on 32-bit Windows. In the cases where I've changed
test expectations, I've checked that they match the output of GNU
readelf.
llvm-svn: 361807
GNU readelf tool prints slightly different dynamic table "header" and
surrounds dynamic tag names by brackets. This patch implements the same
formatting for GNU-style output of the `llvm-readobj`.
LLVM
```
DynamicSection [ (13 entries)
Tag Type Name/Value
0x00000006 SYMTAB 0x168
...
]
```
GNU
```
Dynamic section at offset 0x1d0 contains 13 entries:
Tag Type Name/Value
0x00000006 (SYMTAB) 0x168
...
```
Differential Revision: https://reviews.llvm.org/D62256
llvm-svn: 361633
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361630
This is a result of what I found during my work on https://bugs.llvm.org/show_bug.cgi?id=41679.
Previously LLVM readelf took the information about .dynamic section
from its PT_DYNAMIC segment only. GNU tools have a bit different logic.
They also use the information from the .dynamic section header if it is available.
This patch changes the code to improve the compatibility with the GNU Binutils.
Differential revision: https://reviews.llvm.org/D61937
llvm-svn: 361165
This patch implements a limited form of autolinking primarily designed to allow
either the --dependent-library compiler option, or "comment lib" pragmas (
https://docs.microsoft.com/en-us/cpp/preprocessor/comment-c-cpp?view=vs-2017) in
C/C++ e.g. #pragma comment(lib, "foo"), to cause an ELF linker to automatically
add the specified library to the link when processing the input file generated
by the compiler.
Currently this extension is unique to LLVM and LLD. However, care has been taken
to design this feature so that it could be supported by other ELF linkers.
The design goals were to provide:
- A simple linking model for developers to reason about.
- The ability to to override autolinking from the linker command line.
- Source code compatibility, where possible, with "comment lib" pragmas in other
environments (MSVC in particular).
Dependent library support is implemented differently for ELF platforms than on
the other platforms. Primarily this difference is that on ELF we pass the
dependent library specifiers directly to the linker without manipulating them.
This is in contrast to other platforms where they are mapped to a specific
linker option by the compiler. This difference is a result of the greater
variety of ELF linkers and the fact that ELF linkers tend to handle libraries in
a more complicated fashion than on other platforms. This forces us to defer
handling the specifiers to the linker.
In order to achieve a level of source code compatibility with other platforms
we have restricted this feature to work with libraries that meet the following
"reasonable" requirements:
1. There are no competing defined symbols in a given set of libraries, or
if they exist, the program owner doesn't care which is linked to their
program.
2. There may be circular dependencies between libraries.
The binary representation is a mergeable string section (SHF_MERGE,
SHF_STRINGS), called .deplibs, with custom type SHT_LLVM_DEPENDENT_LIBRARIES
(0x6fff4c04). The compiler forms this section by concatenating the arguments of
the "comment lib" pragmas and --dependent-library options in the order they are
encountered. Partial (-r, -Ur) links are handled by concatenating .deplibs
sections with the normal mergeable string section rules. As an example, #pragma
comment(lib, "foo") would result in:
.section ".deplibs","MS",@llvm_dependent_libraries,1
.asciz "foo"
For LTO, equivalent information to the contents of a the .deplibs section can be
retrieved by the LLD for bitcode input files.
LLD processes the dependent library specifiers in the following way:
1. Dependent libraries which are found from the specifiers in .deplibs sections
of relocatable object files are added when the linker decides to include that
file (which could itself be in a library) in the link. Dependent libraries
behave as if they were appended to the command line after all other options. As
a consequence the set of dependent libraries are searched last to resolve
symbols.
2. It is an error if a file cannot be found for a given specifier.
3. Any command line options in effect at the end of the command line parsing apply
to the dependent libraries, e.g. --whole-archive.
4. The linker tries to add a library or relocatable object file from each of the
strings in a .deplibs section by; first, handling the string as if it was
specified on the command line; second, by looking for the string in each of the
library search paths in turn; third, by looking for a lib<string>.a or
lib<string>.so (depending on the current mode of the linker) in each of the
library search paths.
5. A new command line option --no-dependent-libraries tells LLD to ignore the
dependent libraries.
Rationale for the above points:
1. Adding the dependent libraries last makes the process simple to understand
from a developers perspective. All linkers are able to implement this scheme.
2. Error-ing for libraries that are not found seems like better behavior than
failing the link during symbol resolution.
3. It seems useful for the user to be able to apply command line options which
will affect all of the dependent libraries. There is a potential problem of
surprise for developers, who might not realize that these options would apply
to these "invisible" input files; however, despite the potential for surprise,
this is easy for developers to reason about and gives developers the control
that they may require.
4. This algorithm takes into account all of the different ways that ELF linkers
find input files. The different search methods are tried by the linker in most
obvious to least obvious order.
5. I considered adding finer grained control over which dependent libraries were
ignored (e.g. MSVC has /nodefaultlib:<library>); however, I concluded that this
is not necessary: if finer control is required developers can fall back to using
the command line directly.
RFC thread: http://lists.llvm.org/pipermail/llvm-dev/2019-March/131004.html.
Differential Revision: https://reviews.llvm.org/D60274
llvm-svn: 360984
r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
In the r360676 "Apply clang format. NFC" I applied clang-format
for whole ELFDumper.cpp. It caused a little discussion,
one of the points mentioned was that previously nicely lined up
tables are not so nice now.
This patch reverts them.
llvm-svn: 360860
Patch adds support for dumping of file headers with llvm-readobj. XCOFF
object files are added to test dumping a well formed file, and dumping
both negative timestamps and negative symbol counts, both of which are
allowed in the XCOFF definition.
Differential Revision: https://reviews.llvm.org/D60878
llvm-svn: 359878
Summary:
It currently receives an output parameter and returns
std::error_code. Expected<StringRef> fits for this purpose perfectly.
Differential Revision: https://reviews.llvm.org/D61421
llvm-svn: 359774
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
For well-known type IDs, include the name of the type.
To not duplicate the ID->name map, make llvm-readobj call this new
function as well. It has slightly different output, so this also
requires updating a few tests.
Differential Revision: https://reviews.llvm.org/D61086
llvm-svn: 359153
This is a resubmission of a previous patch that caused test failures,
with the fixes for the relevant tests included.
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
llvm-svn: 358395
The size field of a location can be different for each entry, so it is useful to have this displayed in the output of llvm-readobj -stackmap. Below is an example of how the output would look:
Record ID: 2882400000, instruction offset: 16
3 locations:
#1: Constant 1, size: 8
#2: Constant 2, size: 8
#3: Constant 3, size: 8
0 live-outs: [ ]
Patch By: jacob.hughes@kcl.ac.uk (with heavy modification by me)
Differential Revision: https://reviews.llvm.org/D59169
llvm-svn: 358324
Summary:
This ensures that object files will continue to validate as
WebAssembly modules in the presence of bulk memory operations. Engines
that don't support bulk memory operations will not recognize the
DataCount section and will report validation errors, but that's ok
because object files aren't supposed to be run directly anyway.
Reviewers: aheejin, dschuff, sbc100
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60623
llvm-svn: 358315
The new value is taken from <mach/machine.h> in the MacOSX10.14 SDK from
Xcode 10.1. Update llvm-objdump and llvm-readobj accordingly.
Differential Revision: https://reviews.llvm.org/D58636
llvm-svn: 357945
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
Differential Revision: https://reviews.llvm.org/D59946
llvm-svn: 357772
Summary: Currently, `llvm-readobj` do not support GNU style dumper for symbol versioning sections. In this patch, I would like to implement dumper for `.gnu.version` section
Reviewers: jhenderson, rupprecht, grimar
Reviewed By: jhenderson, rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59877
llvm-svn: 357578
Summary: Support reading notes that don't have a standard note name.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59969
llvm-svn: 357271
The majority of the printRelocation and printDynamicRelocation functions
were identical. This patch factors this all out into a new function.
There are a couple of minor differences to do with printing of symbols
without names, but I think these are harmless, and in some cases a small
improvement.
Reviewed by: grimar, rupprecht, Higuoxing
Differential Revision: https://reviews.llvm.org/D59823
llvm-svn: 357246
Summary: When implementing `GNU style` dumper for `.gnu.version` section, we should find symbol version name by `vs_index`.
Reviewers: jhenderson, rupprecht
Reviewed By: rupprecht
Subscribers: arphaman, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59545
llvm-svn: 357164
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: jhenderson, rupprecht
Subscribers: ormris, dyung, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356881
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356764
Summary:
This commit introduces a new AMDGPUPALMetadata class that:
* is inside the AMDGPU target;
* keeps an in-memory representation of PAL metadata;
* provides a method to read the frontend-supplied metadata from LLVM IR;
* provides methods for the asm printer to set metadata items;
* provides methods to write the metadata as a binary blob to put in a
.note record or as an asm directive;
* provides a method to read the metadata as a binary blob from a .note
record.
Because llvm-readobj cannot call directly into a target, I had to remove
llvm-readobj's ability to dump PAL metadata, pending a resolution to
https://reviews.llvm.org/D52821
Differential Revision: https://reviews.llvm.org/D57027
Change-Id: I756dc830894fcb6850324cdcfa87c0120eb2cf64
llvm-svn: 356582
Summary:
MsgPackDocument is the lighter-weight replacement for MsgPackTypes. This
commit switches AMDGPU HSA metadata processing to use MsgPackDocument
instead of MsgPackTypes.
Differential Revision: https://reviews.llvm.org/D57024
Change-Id: I0751668013abe8c87db01db1170831a76079b3a6
llvm-svn: 356081
Specifically, compute and Print Type and Section columns.
This is a re-commit of rL354833, after fixing the Asan problem found a a buildbot.
Differential Revision: https://reviews.llvm.org/D59060
llvm-svn: 355742
llvm-readelf prints relocation addends as:
<symbol value>[+-]<absolute addend>
where [+-] is determined from whether addend is less than zero or not.
However, it does not print the +/- if there is no symbol, which meant
that negative addends became their positive value with no indication
that this had happened. This patch stops the absolute conversion when
addends are negative and there is no associated symbol.
Reviewed by: Higuoxing, mattd, MaskRay
Differential Revision: https://reviews.llvm.org/D59095
llvm-svn: 355696
Summary:
This patch will obtain the section name for symbols that refer to a section. Prior to this patch the Name field for STT_SECTIONs was blank, now it is populated.
Before:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
With this patch:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1 .text
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3 .data
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4 .bss
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
This fixes PR40788
Reviewers: jhenderson, rupprecht, espindola
Reviewed By: rupprecht
Subscribers: emaste, javed.absar, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58796
llvm-svn: 355207
This patch allows all forms of values for options to be used at the end
of a group. With the fix, it is possible to follow the way GNU binutils
tools handle grouping options better. For example, the -j option can be
used with objdump in any of the following ways:
$ objdump -d -j .text a.o
$ objdump -d -j.text a.o
$ objdump -dj .text a.o
$ objdump -dj.text a.o
Differential Revision: https://reviews.llvm.org/D58711
llvm-svn: 355185
There's no reason to limit the DWARF CFI dumper to EM_386 and EM_X86_64;
ELF files could contain DWARF CFI on almost any platform (even 32-bit ARM;
NetBSD uses DWARF CFI on that platform). So start using the DWARF CFI dumper
unconditionally so that we can dump .eh_frame sections on the remaining ELF
platforms as well as in NetBSD binaries.
Differential Revision: https://reviews.llvm.org/D58761
llvm-svn: 355151
This is https://bugs.llvm.org/show_bug.cgi?id=40861,
Previously llvm-readobj would print the DT_NULL sometimes
for the dynamic section that has no terminator entry.
The logic of printDynamicTable was a bit overcomplicated.
I rewrote it slightly to fix the issue and commented.
Differential revision: https://reviews.llvm.org/D58716
llvm-svn: 355073
Summary:
This patch displays a hexadecimal section value (Elf_Shdr::sh_type) or section-relative offset when printing unknown sections.
Here is a subset of the output (ignoring the fields following "Type" when dumping an ELF's GNU `--section-headers` table).
Section Headers:
```
[Nr] Name Type
[16] android_rel LOOS+0x1
[17] android_rela LOOS+0x2
[27] unknown 0x1000: <unknown>
[28] loos LOOS+0
[30] hios VERSYM
[31] loproc LOPROC+0
[33] hiproc LOPROC+0xFFFFFFF
[34] louser LOUSER+0
[36] hiuser LOUSER+0x7FFFFFFF
```
As a comparison, the previous output looked something like the above, but with a blank "Type" field:
```
[Nr] Name Type
[27] unknown
[28] loos
[30] hios VERSYM
[31] loproc
[33] hiproc
[34] louser
[36] hiuser
```
This fixes PR40773
Reviewers: jhenderson, rupprecht, Bigcheese
Reviewed By: jhenderson, rupprecht, Bigcheese
Subscribers: MaskRay, Bigcheese, srhines, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58701
llvm-svn: 355014
llvm-readobj's error messages were broken for bad archive members. This
patch fixes them, and also adds testing for archive and thin archive
handling within llvm-readobj.
Reviewed by: rupprecht, grimar, higuoxing
Differential Revision: https://reviews.llvm.org/D58681
llvm-svn: 354960
Summary:
This is to be consistent with the display of other MIPS section types.
This string is also used by binutils-gdb/binutils/readelf.c:get_mips_section_type_name
Since we are here, reorder the two enum constatns because SHT_MIPS_DWARF < SHT_MIPS_ABIFLAGS.
Reviewers: jhenderson, atanasyan
Reviewed By: jhenderson
Subscribers: aprantl, sdardis, arichardson, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58496
llvm-svn: 354571
Add a flag to allow symbols to have a wasm import name which differs from the
linker symbol name, allowing the linker to link code using the import_module
attribute.
This is the MC/Object portion of the patch.
Differential Revision: https://reviews.llvm.org/D57632
llvm-svn: 353474
When type streams with forward references were merged using GHashes, cycles
were introduced in the debug info. This was caused by
GlobalTypeTableBuilder::insertRecordAs() not inserting the record on the second
pass, thus yielding an empty ArrayRef at that record slot. Later on, upon PDB
emission, TpiStreamBuilder::commit() would skip that empty record, thus
offseting all indices that came after in the stream.
This solution comes in two steps:
1. Fix the hash calculation, by doing a multiple-step resolution, iff there are
forward references in the input stream.
2. Fix merge by resolving with multiple passes, therefore moving records with
forward references at the end of the stream.
This patch also adds support for llvm-readoj --codeview-ghash.
Finally, fix dumpCodeViewMergedTypes() which previously could reference deleted
memory.
Fixes PR40221
Differential Revision: https://reviews.llvm.org/D57790
llvm-svn: 353412
Summary:
The following patch adds the "None" line to the section to segment mapping dump.
That line lists the sections that do not belong to any segment.
I realize that this change differs from GNU readelf which does not display the latter information.
I'd rather not add this "feature" under a command line option. I think that might introduce confusion, since users would have to
make an additional decision as to if they want to see all of the section-to-segment map or just a subset of it.
Another option is to only print the "None" line if the `--section-mapping` option is passed; however,
that might also introduce some confusion, because the section-to-segment map would be different between`--program-headers`
and the `--section-mapping` output. While the difference is just the "None" line, it seems that if we choose to display
the segment-to-section mapping, then we should always display the whole map including the sections
that do not belong to segments.
```
Section to Segment mapping:
Segment Sections...
00
01 .interp
02 .interp .note.ABI-tag .gnu.hash
03 .init_array .fini_array .dynamic
04 .dynamic
05 .note.ABI-tag
06 .eh_frame_hdr
07
08 .init_array .fini_array .dynamic .got
None .comment .symtab .strtab .shstrtab <--- THIS LINE
```
Reviewers: grimar, rupprecht, jhenderson, espindola
Reviewed By: rupprecht
Subscribers: khemant, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57700
llvm-svn: 353217
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
Summary:
The following patch introduces a new function `printSectionMapping` which is responsible for dumping just the section-to-segment mapping.
This patch also introduces a n option `-section-mapping` that outputs that mapping without the program headers.
Previously, this functionality was controlled by `printProgramHeaders`, and the output from `-program-headers` has not been changed. I am happy to change the option name, I copied the name that was displayed when outputting the mapping table.
Reviewers: khemant, jhenderson, grimar, rupprecht
Reviewed By: jhenderson, grimar, rupprecht
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57365
llvm-svn: 352896
We have a Field struct which has a StringRef member Str.
The code needs to create and keep alive the temporarily
std::string variables because of that.
That is not convenient and makes the code be more complicated
than it could be.
There seems to be no reason to keep Str be StringRef.
The patch changes it to be std::string and
rearranges the code around slightly.
Differential revision: https://reviews.llvm.org/D57447
llvm-svn: 352623
In r287786, a bug was introduced into llvm-readelf where it didn't print
the static symbol table if both --symbols and --dyn-symbols were
specified, even if there was no dynamic symbol table. This is obviously
incorrect.
This patch fixes this issue, by delegating the decision of which symbol
tables should be printed to the final dumper, rather than trying to
decide in the command-line option handling layer. The decision was made
to follow the approach taken in this patch because the LLVM style dumper
uses a different order to the original GNU style behaviour (and GNU
readelf) for ELF output. Other approaches resulted in behaviour changes
for other dumpers which felt wrong. In particular, I wanted to avoid
changing the order of the output for --symbols --dyn-symbols for LLVM
style, keep what is emitted by --symbols unchanged for all dumpers, and
avoid having different orders of .dynsym and .symtab dumping for GNU
"--symbols" and "--symbols --dyn-symbols".
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D57016
llvm-svn: 351960
In r287786, the behaviour of --dyn-symbols in llvm-readelf (but not
llvm-readobj) was changed to print the dynamic symbols as derived from
the hash table, rather than to print the dynamic symbol table contents
directly. The original change was initially submitted without review,
and some comments were made on the commit mailing list implying that the
new behavious is GNU compatible. I argue that it is not:
1) It does not include a null symbol.
2) It prints the symbols based on an order derived from the hash
table.
3) It prints an extra column indicating which bucket it came from.
This could break parsers that expect a fixed number of columns,
with the first column being the symbol index.
4) If the input happens to have both .hash and .gnu.hash section, it
prints interpretations of them both, resulting in most symbols
being printed twice.
5) There is no way of just printing the raw dynamic symbol table,
because --symbols also prints the static symbol table.
This patch reverts the --dyn-symbols behaviour back to its old behaviour
of just printing the contents of the dynamic symbol table, similar to
what is printed by --symbols. As the hashed interpretation is still
desirable to validate the hash table, it puts it under a new switch
"--hash-symbols". This is a no-op on all output forms except for GNU
output style for ELF. If there is no hash table, it does nothing,
unlike the previous behaviour which printed the raw dynamic symbol
table, since the raw dynsym is available under --dyn-symbols.
The yaml input for the test is based on that in
test/tools/llvm-readobj/demangle.test, but stripped down to the bare
minimum to provide a valid dynamic symbol.
Note: some LLD tests needed updating. I will commit a separate patch for
those.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56910
llvm-svn: 351789
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This change adds demangling support to the ELF side of llvm-readobj,
under the switch --demangle/-C.
The following places are demangled: symbol table dumps (static and
dynamic), relocation dumps (static and dynamic), addrsig dumps, call
graph profile dumps, and group section signature symbols.
Although GNU readelf doesn't support demangling, it is still a useful
feature to have, and brings it on a par with llvm-objdump's
capabilities.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40054.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56791
llvm-svn: 351450
Summary:
This patch adds support for merged arguments (e.g. -SW == -S -W) for llvm-readelf.
No changes are intended for llvm-readobj. There are a few short flags (-sd, -sr, -st, -dt) that would conflict with grouped single letter flags, and having only some grouped flags might be confusing. So, allow merged flags for readelf compatibility, but force separate args for llvm-readobj. From what I can tell, these two-letter flags are only used with llvm-readobj, not llvm-readelf.
This fixes PR40064.
Reviewers: jhenderson, kristina, echristo, phosek
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56629
llvm-svn: 351205
There can be multiple local symbols with the same name (for e.g.
comdat sections), and thus the symbol name itself isn't enough
to disambiguate symbols.
Differential Revision: https://reviews.llvm.org/D56140
llvm-svn: 350288
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
string printing later on
Differential Revision: https://reviews.llvm.org/D55774
llvm-svn: 349472
Continue to present HSA metadata as YAML in ASM and when output by tools
(e.g. llvm-readobj), but encode it in Messagepack in the code object.
Differential Revision: https://reviews.llvm.org/D48179
llvm-svn: 348963
Summary:
This anoymous function actually has same logic with `Obj->toMappedAddr`.
Besides, I have a question on resolving illegal value. `gnu-readelf`, `gnu-objdump` and `llvm-objdump` could parse the test file 'test/tools/llvm-objdump/Inputs/private-headers-x86_64.elf', but `llvm-readobj` will fail when parse `DT_RELR` segment. Because, the value is 0x87654321 which is illegal. So, shall we do this clean up rather then remove the checking statements inside anoymous function?
```
if (Delta >= Phdr.p_filesz)
return createError("Virtual address is not in any segment");
```
Reviewers: rupprecht, jhenderson
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55329
llvm-svn: 348701
Summary:
This adds support for the 'event section' specified in the exception
handling proposal. (This was named 'exception section' first, but later
renamed to 'event section' to take possibilities of other kinds of
events into consideration. But currently we only store exception info in
this section.)
The event section is added between the global section and the export
section. This is for ease of validation per request of the V8 team.
This patch:
- Creates the event symbol type, which is a weak symbol
- Makes 'throw' instruction take the event symbol '__cpp_exception'
- Adds relocation support for events
- Adds WasmObjectWriter / WasmObjectFile (Reader) support
- Adds obj2yaml / yaml2obj support
- Adds '.eventtype' printing support
Reviewers: dschuff, sbc100, aardappel
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54096
llvm-svn: 346825
Summary:
This change adds a bunch of options that GNU readelf supports. There is one breaking change when invoked as `llvm-readobj`, and three breaking changes when invoked as `llvm-readelf`:
- Add --all (implies --file-header, --program-headers, etc.)
- [Breaking] -a is --all instead of --arm-attributes
- Add --file-header as an alias for --file-headers
- Replace --sections with --sections-headers, keeping --sections as an alias for it
- Add --relocs as an alias for --relocations
- Add --dynamic as an alias for --dynamic-table
- Add --segments as an alias for --program-headers
- Add --section-groups as an alias for --elf-section-groups
- Add --dyn-syms as an alias for --dyn-symbols
- Add --syms as an alias for --symbols
- Add --histogram as an alias for --elf-hash-histogram
- [Breaking] When invoked as `llvm-readelf`, -s is --symbols instead of --sections
- [Breaking] When invoked as `llvm-readelf`, -t is no longer an alias for --symbols
Reviewers: MaskRay, phosek, mcgrathr, jhenderson
Reviewed By: MaskRay, jhenderson
Subscribers: sbc100, aheejin, edd, jhenderson, silvas, echristo, compnerd, kristina, javed.absar, kristof.beyls, llvm-commits, Bigcheese
Differential Revision: https://reviews.llvm.org/D54124
llvm-svn: 346685
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
llvm-svn: 346604
Summary:
Port the GNU style printNotes method to the LLVMStyle subclass.
This is basically just a heavy refactor so that the note parsing/formatting logic from the GNUStyle::printNotes can be shared with LLVMStyle::printNotes.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: dschuff, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D54220
llvm-svn: 346371
This change allows for link-time merging of debugging information from
Microsoft precompiled types OBJs compiled with cl.exe /Z7 /Yc and /Yu.
This fixes llvm.org/PR34278
Differential Revision: https://reviews.llvm.org/D45213
llvm-svn: 346154
Use getImageBase() helper to compute the image base. Fix various
offsets/addresses/masks so they're actually correct.
This allows decoding unwind info from DLLs, and unwind info from object
files containing multiple functions.
Differential Revision: https://reviews.llvm.org/D54015
llvm-svn: 346036
Summary:
Add missing breaks. Several functions used nested switch statements,
where the outer switch branches based on the architecture, and the inner
switch handles architecture-specific types. If the type isn't
architecture-specific, break out to the generic types rather than fall
through.
getElfPtType: For GNU-style output, llvm-readobj prints
"<unknown>: 0xnnnnnnnn" for an unrecognized segment type, unless the
architecture is EM_ARM, EM_MIPS, or EM_MIPS_RS3_LE, in which case it
prints "". This behavior appears accidental, so instead, always print
the "<unknown>: 0xnnnnnnnn" string.
Reviewers: pcc, grimar
Reviewed By: grimar
Subscribers: sdardis, javed.absar, arichardson, kristof.beyls, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53730
llvm-svn: 345436
GNU readelf tool prints hex value of the ELF header flags field and the
flags names. This change adds the same functionality to llvm-readobj.
Now llvm-readobj can print MIPS and RISCV flags.
New GNUStyle::printFlags() method is a copy of ScopedPrinter::printFlags()
routine. Probably we can escape code duplication and / or simplify the
printFlags() method. But it's a task for separate commit.
Differential revision: https://reviews.llvm.org/D52027
llvm-svn: 345238
This patch adds support for dumping the unwind info from ARM64 COFF object
files.
Differential Revision: https://reviews.llvm.org/D53264
llvm-svn: 345108
- Add fix so that all code paths that create DWARFContext
with an ObjectFile initialise the target architecture in the context
- Add an assert that the Arch is known in the Dwarf CallFrameString method
llvm-svn: 343317
This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.
> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
> state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
> i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
> (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
> https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343103
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
(0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
https://patchwork.ozlabs.org/patch/800271/
Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343089
For people who use llvm-readelf as a replacement of GNU readelf, they would like to see -d -r ... listed in llvm-readelf -help. It also helps understanding the confusing -s (which is unfortunately different in semantics).
Reviewers: phosek, ruiu, echristo
Reviewed By: ruiu, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52129
llvm-svn: 342339
Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:
0: no register - Used when there are no variables.
1: SP / standard - Variables are stored relative to the standard SP
for the ISA.
2: FP - Variables are addressed relative to the ISA frame
pointer, i.e. EBP on x86. If realignment is required, parameters
use this. If a dynamic alloca is used, locals will be EBP relative.
3: Alternative - Variables are stored relative to some alternative
third callee-saved register. This is required to address highly
aligned locals when there are dynamic stack adjustments. In this
case, both the incoming SP saved in the standard FP and the current
SP are at some dynamic offset from the locals. LLVM uses ESI in
this case, MSVC uses EBX.
Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D51894
llvm-svn: 341999
The format is the same as in ELF: a sequence of ULEB128-encoded
symbol indexes.
Differential Revision: https://reviews.llvm.org/D51047
llvm-svn: 340499
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
Helpers are available to make this option file format independant. This
patch adds the feature for Wasm file format. It doesn't change the
behavior of the other file format handling.
Differential Revision: https://reviews.llvm.org/D49545
llvm-svn: 337896
When output style is GNU and amount of sections is >= SHN_LORESERVE,
llvm-readobj reports zero number of sections instead of actual value.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49544
llvm-svn: 337462
http://www.sco.com/developers/gabi/2003-12-17/ch4.eheader.html
says that e_shnum and/or e_shstrndx may have special values if
"the number of sections is greater than or equal to SHN_LORESERVE" or
"the section name string table section index is greater than or equal to SHN_LORESERVE (0xff00)"
Previously llvm-readobj was unable to dump such files, patch changes that.
I had to add a precompiled test case because it does not seem possible to
prepare a test using yaml2obj or llvm-mc (not clear how to make .shstrtab
to have index >= SHN_LORESERVE).
Differential revision: https://reviews.llvm.org/D49369
llvm-svn: 337360
George Rimar