The tests were failing due to an occasional deadlock in SerializationTraits
for Error: Both serializers and deserializers were protected by a single
mutex and in the unit test (where both ends of the RPC are in the same
process) one side might obtain the mutex, then block waiting for input,
leaving the other side of the connection unable to obtain the mutex to
write the data the first side was waiting for. Splitting the mutex into
two (one for serialization, one for deserialization) appears to have fixed the
issue.
llvm-svn: 300286
Now that we have a type that can represent the attributes on a single
return, function, or parameter, we can pass it around directly rather
than passing around AttributeList and Idx. Removes some more one-based
argument attribute index counting.
NFC
llvm-svn: 300285
This further improves Ahmed's change in rL299482. See the new comment for the
rationale.
The patch recovers most of the regression for bzip2 after D31965. We're down
to +2.68% from +6.97%.
Differential Revision: https://reviews.llvm.org/D32028
llvm-svn: 300276
Add hasParamAttribute() and use it instead of hasAttribute(ArgNo+1,
Kind) everywhere.
The fact that the AttributeList index for an argument is ArgNo+1 should
be a hidden implementation detail.
NFC
llvm-svn: 300272
If the offset cannot fit into the instruction, an addition to the
pointer is emitted before the actual access. However, BPF offsets are
16-bit but LLVM considers them to be, for the matter of this check,
to be 32-bit long.
This causes the following program:
int bpf_prog1(void *ign)
{
volatile unsigned long t = 0x8983984739ull;
return *(unsigned long *)((0xffffffff8fff0002ull) + t);
}
To generate the following (wrong) code:
0: 18 01 00 00 39 47 98 83 00 00 00 00 89 00 00 00
r1 = 590618314553ll
2: 7b 1a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r1
3: 79 a1 f8 ff 00 00 00 00 r1 = *(u64 *)(r10 - 8)
4: 79 10 02 00 00 00 00 00 r0 = *(u64 *)(r1 + 2)
5: 95 00 00 00 00 00 00 00 exit
Fix it by changing the offset check to 16-bit.
Patch by Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Differential Revision: https://reviews.llvm.org/D32055
llvm-svn: 300269
- Refer to options by `-option` instead of `option`
- Use `-mtriple=` instead of `-march` in the example (-march will still
target the default operating system which is usually not what you want
in a test)
- Rephrase sentence because output does not go to stdout by default (you
need -o - for that as should be expected).
llvm-svn: 300268
The ErrorOr should not be dereferenced on the error path.
Patch by Jacob Young
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32032
llvm-svn: 300267
We may not have a working C++ standard library at this point so we
shouldn't rely on it when running CMake checks.
Differential Revision: https://reviews.llvm.org/D31942
llvm-svn: 300260
We call it unconditionally on the operands of the select. Then decide if its a min/max and call it on the min/max operands or on the select operands again. Either of those second calls will overwrite the results of the initial call so we can just delete the first call.
llvm-svn: 300256
For LCSSA purposes, loop BBs not dominating any of the exits aren't
interesting, as none of the values defined in these blocks can be
used outside the loop.
The way the code computed this information was by comparing each
BB of the loop with each of the exit blocks and ask the dominator tree
about their dominance relation. This is slow.
A more efficient way, implemented here, is that of starting from the
exit blocks and walking the dom upwards until we hit an header. By
transitivity, all the blocks we encounter in our path dominate an exit.
For the testcase provided in PR31851, this reduces compile time on
`opt -O2` by ~25%, going from 1m47s to 1m22s.
Thanks to Dan/MichaelZ for discussions/suggesting the approach/review.
Differential Revision: https://reviews.llvm.org/D31843
llvm-svn: 300255
Switch from Euclid's algorithm to Stein's algorithm for computing GCD. This
avoids the (expensive) APInt division operation in favour of bit operations.
Remove all memory allocation from within the GCD loop by tweaking our `lshr`
implementation so it can operate in-place.
Differential Revision: https://reviews.llvm.org/D31968
llvm-svn: 300252
Summary:
Bug noticed by inspection.
Extend the test to handle invokes as well as calls, and rewrite it to
not depend on the inliner and other passes.
Also simplify the call site replacement code with CallSite, similar to
what I did to dead arg elimination and arg promotion (rL300235 and
rL300229).
Reviewers: danielcdh, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32041
llvm-svn: 300251
Summary: For iterative SamplePGO, an indirect call can be speculatively promoted to multiple direct calls and get inlined. All these promoted direct calls will share the same callsite location (offset+discriminator). With the current implementation, we cannot distinguish between different promotion candidates and its inlined instance. This patch adds callee_name to the key of the callsite sample map. And added helper functions to get all inlined callee samples for a given callsite location. This helps the profile annotator promote correct targets and inline it before annotation, and ensures all indirect call targets to be annotated correctly.
Reviewers: davidxl, dnovillo
Reviewed By: davidxl
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31950
llvm-svn: 300240
Summary:
In first order recurrences where phi's are used outside the loop,
we should generate an additional vector.extract of the second last element from
the vectorized phi update.
This is because we require the phi itself (which is the value at the second last
iteration of the vector loop) and not the phi's update within the loop.
Also fix the code gen when we just unroll, but don't vectorize.
Fixes PR32396.
Reviewers: mssimpso, mkuper, anemet
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D31979
llvm-svn: 300238
This is effectively a retry of:
https://reviews.llvm.org/rL299851
but now we have tests and an assert to make sure the bug
that was exposed with that attempt will not happen again.
I'll fix the code duplication and missing sibling fold next,
but I want to make this change as small as possible to reduce
risk since I messed it up last time.
This should fix:
https://bugs.llvm.org/show_bug.cgi?id=32524
llvm-svn: 300236
Noticed by inspection while doing attribute work. DAE, InstCombineCalls,
and ArgPromotion have a fair amount of duplicated code for hacking on
call sites, and you can find bugs by comparing them.
Add a test case for this.
llvm-svn: 300229
In many cases ds operations can be combined even if offsets do not
fit into 8 bit encoding. What it takes is to adjust base address.
Differential Revision: https://reviews.llvm.org/D31993
llvm-svn: 300227
It's less efficient to produce 'ule' than 'ult' since we know we're going to
canonicalize to 'ult', but we shouldn't have duplicated code for these folds.
As a trade-off, this was a pretty terrible way to make a '2'. :)
if (LHSC == SubOne(RHSC))
AddC = ConstantExpr::getSub(AddOne(RHSC), LHSC);
The next steps are to share the code to fix PR32524 and add the missing 'and'
fold that was left out when PR14708 was fixed:
https://bugs.llvm.org/show_bug.cgi?id=14708
llvm-svn: 300222
Summary:
* Add a bitreverse case in the demanded bits analysis pass.
* Add tests for the bitreverse (and bswap) intrinsic in the
demanded bits pass.
* Add a test case to the BDCE tests: that manipulations to
high-order bits are eliminated once the bits are reversed
and then right-shifted.
Reviewers: mkuper, jmolloy, hfinkel, trentxintong
Reviewed By: jmolloy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31857
llvm-svn: 300215
Summary:
The linker needs to be able to determine whether a symbol is text or data to
handle the case of a common being overridden by a strong definition in an
archive. If the archive contains a text member of the same name as the common,
that function is discarded. However, if the archive contains a data member of
the same name, that strong definition overrides the common. This is a behavior
of ld.bfd, which the Qualcomm linker also supports in LTO.
Here's a test case to illustrate:
####
cat > 1.c << \!
int blah;
!
cat > 2.c << \!
int blah() {
return 0;
}
!
cat > 3.c << \!
int blah = 20;
!
clang -c 1.c
clang -c 2.c
clang -c 3.c
ar cr lib.a 2.o 3.o
ld 1.o lib.a -t
####
The correct output is:
1.o
(lib.a)3.o
Thanks to Shankar Easwaran and Hemant Kulkarni for the test case!
Reviewers: mehdi_amini, rafael, pcc, davide
Reviewed By: pcc
Subscribers: davide, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D31901
llvm-svn: 300205
If we had these tests, the bug caused by https://reviews.llvm.org/rL299851 would have been caught sooner.
There's also an assert in the code that should have caught that bug, but the assert line itself has a bug.
llvm-svn: 300201
Instructions CALLSEQ_START..CALLSEQ_END and their target dependent
counterparts keep data like frame size, stack adjustment etc. These
data are accessed by getOperand using hard coded indices. It is
error prone way. This change implements the access by special methods,
which improve readability and allow changing data representation without
massive changes of index values.
Differential Revision: https://reviews.llvm.org/D31953
llvm-svn: 300196
Throughout the effort of automatically generating the X86 memory folding tables these missing information were encountered.
This is a preparation work for a future patch including the automation of these tables.
Differential Revision: https://reviews.llvm.org/D31714
llvm-svn: 300190
Refactoring InnerLoopVectorizer's vectorizeBlockInLoop() to provide
vectorizeInstruction(). Aligning DeadInstructions with its only user.
Facilitates driving the transformation by VPlan - follows
https://reviews.llvm.org/D28975 and its tentative breakdown.
Differential Revision: https://reviews.llvm.org/D31997
llvm-svn: 300183
The bool type may be larger than the char type, so assuming we can cast from
bool to char and write a byte out to the stream is unsafe.
Hopefully this will get RPCUtilsTest.ReturnExpectedFailure passing on the bots.
llvm-svn: 300174
Summary:
APInt is currently implemented with an unsigned BitWidth field first and then a uint_64/pointer union. Due to the 64-bit size of the union there is a hole after the bitwidth.
Putting the union first allows the class to be packed. Making it 12 bytes instead of 16 bytes. An APSInt goes from 20 bytes to 16 bytes.
This shows a 4k reduction on the size of the opt binary on my local x86-64 build. So this enables some other improvement to the code as well.
Reviewers: dblaikie, RKSimon, hans, davide
Reviewed By: davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D32001
llvm-svn: 300171
At the very least, we have CallInst::setIsNoInline() for adding the
noinline attribute to callsites, and I'm told alwaysinline seems to
work.
Thought of adding "not all attributes are guaranteed to work here". If
someone thinks that would be better (or has a better way of phrasing
that, etc.), happy to add it.
llvm-svn: 300168
This patch allows Error and Expected types to be passed to and returned from
RPC functions.
Serializers and deserializers for custom error types (types deriving from the
ErrorInfo class template) can be registered with the SerializationTraits for
a given channel type (see registerStringError in RPCSerialization.h for an
example), allowing a given custom type to be sent/received. Unregistered types
will be serialized/deserialized as StringErrors using the custom type's log
message as the error string.
llvm-svn: 300167
This is a magic header file supported by the build system that provides a
single definition, LLVM_REVISION, containing an LLVM revision identifier,
if available. This functionality previously lived in the LTO library, but
I am moving it out to lib/Support because I want to also start using it in
lib/Object to create the IR symbol table.
This change also fixes a bug where LLVM_REVISION was never actually being
used in lib/LTO because the macro HAS_LLVM_REVISION was never defined (it
was misspelled as HAVE_SVN_VERSION_INC in lib/LTO/CMakeLists.txt, and was
only being defined in a non-existent file Version.cpp).
I also changed the code to use "git rev-parse --git-dir" to locate the .git
directory, instead of looking for it in the LLVM source root directory,
which makes this compatible with monorepos as well as git worktrees.
Differential Revision: https://reviews.llvm.org/D31985
llvm-svn: 300160
This seems like a much more natural API, based on Derek Schuff's
comments on r300015. It further hides the implementation detail of
AttributeList that function attributes come last and appear at index
~0U, which is easy for the user to screw up. git diff says it saves code
as well: 97 insertions(+), 137 deletions(-)
This also makes it easier to change the implementation, which I want to
do next.
llvm-svn: 300153
This typedef used to be conditional based on whether rvalue references were supported. Looks like it got left behind when we switched to always having rvalue references with c++11. I don't think it provides any value now.
llvm-svn: 300146
Improve performance of argument list parsing with large numbers of IDs and
large numbers of arguments, by tracking a conservative range of indexes within
the argument list that might contain an argument with each ID. In the worst
case (when the first and last argument with a given ID are at the opposite ends
of the argument list), this still results in a linear-time walk of the list,
but it helps substantially in the common case where each ID occurs only once,
or a few times close together in the list.
This gives a ~10x speedup to clang's `test/Driver/response-file.c`, which
constructs a very large set of command line arguments and feeds them to the
clang driver.
Differential Revision: https://reviews.llvm.org/D30130
llvm-svn: 300135
In a followup patch I intend to introduce an additional dumping
mode which dumps a graphical representation of a class's layout.
In preparation for this, the text-based layout printer needs to
be split out from the graphical layout printer, and both need
to be able to use the same code for printing the intro and outro
of a class's definition (e.g. base class list, etc).
This patch does so, and in the process introduces a skeleton
definition for the graphical printer, while currently making
the graphical printer just print nothing.
NFC
llvm-svn: 300134
Previously the dumping of class definitions was very primitive,
and it made it hard to do more than the most trivial of output
formats when dumping. As such, we would only dump one line for
each field, and then dump non-layout items like nested types
and enums.
With this patch, we do a complete analysis of the object
hierarchy including aggregate types, bases, virtual bases,
vftable analysis, etc. The only immediately visible effects
of this are that a) we can now dump a line for the vfptr where
before we would treat that as padding, and b) we now don't
treat virtual bases that come at the end of a class as padding
since we have a more detailed analysis of the class's storage
usage.
In subsequent patches, we should be able to use this analysis
to display a complete graphical view of a class's layout including
recursing arbitrarily deep into an object's base class / aggregate
member hierarchy.
llvm-svn: 300133
The test fails on Darwin because Fuzzer::DeathCallback (which calls
DumpCurrentUnit("crash-")) is called before DumpCurrentUnit("oom-") is
called in Fuzzer::RssLimitCallback. DeathCallback is transitively called
from __sanitizer_print_memory_profile.
This should fix the fuzzer bot that has been failing for a while:
http://lab.llvm.org:8080/green/job/libFuzzer/
llvm-svn: 300127
Previously it tried to call SimplifyInstruction which doesn't know anything about alloca so defers to constant folding which also doesn't do anything with alloca. This results in wasted cycles making calls that won't do anything. Given the frequency with which this function is called this time adds up.
llvm-svn: 300118
If workgroup size is known inform llvm about range returned by local
id and local size queries.
Differential Revision: https://reviews.llvm.org/D31804
llvm-svn: 300102
Summary:
Readnone attribute would cause CSE of two barriers with
the same argument, which is invalid by example:
struct Base {
virtual int foo() { return 42; }
};
struct Derived1 : Base {
int foo() override { return 50; }
};
struct Derived2 : Base {
int foo() override { return 100; }
};
void foo() {
Base *x = new Base{};
new (x) Derived1{};
int a = std::launder(x)->foo();
new (x) Derived2{};
int b = std::launder(x)->foo();
}
Here 2 calls of std::launder will produce @llvm.invariant.group.barrier,
which would be merged into one call, causing devirtualization
to devirtualize second call into Derived1::foo() instead of
Derived2::foo()
Reviewers: chandlerc, dberlin, hfinkel
Subscribers: llvm-commits, rsmith, amharc
Differential Revision: https://reviews.llvm.org/D31531
llvm-svn: 300101
Often you have a unique_ptr<T> where T supports LLVM's
casting methods, and you wish to cast it to a unique_ptr<U>.
Prior to this patch, this requires doing hacky things like:
unique_ptr<U> Casted;
if (isa<U>(Orig.get()))
Casted.reset(cast<U>(Orig.release()));
This is overly verbose, and it would be nice to just be able
to use unique_ptr directly with cast and dyn_cast. To this end,
this patch updates cast<> to work directly with unique_ptr<T>,
so you can now write:
auto Casted = cast<U>(std::move(Orig));
Since it's possible for dyn_cast<> to fail, however, we choose
to use a slightly different API here, because it's awkward to
write
if (auto Casted = dyn_cast<U>(std::move(Orig))) {}
when Orig may end up not having been moved at all. So the
interface for dyn_cast is
if (auto Casted = unique_dyn_cast<U>(Orig)) {}
Where the inclusion of `unique` in the name of the cast operator
re-affirms that regardless of success of or fail of the casting,
exactly one of the input value and the return value will contain
a non-null result.
Differential Revision: https://reviews.llvm.org/D31890
llvm-svn: 300098
This replicates the known bits and constant creation code from the single use case for these instructions and adds it here. The computeKnownBits and constant creation code for other instructions is now in the default case of the opcode switch.
llvm-svn: 300094
We already handled a superset check that included the known ones too and folded to a constant that may include ones. But it can also handle the case of no ones.
llvm-svn: 300093
As discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32486
...the canonicalization of vector select to shufflevector does not hold up
when undef elements are present in the condition vector.
Try to make the undef handling clear in the code and the LangRef.
Differential Revision: https://reviews.llvm.org/D31980
llvm-svn: 300092
The use of a DenseMap in precomputeTriangleChains does not cause
non-determinism, even though it is iterated over, as the only thing the
iteration does is to insert entries into a new DenseMap, which is not iterated.
Comment only change.
llvm-svn: 300088
Daniel Berlin