`SC` didn't make much sense. We don't seem to have a clear convention,
but `IS` sounds good here because it emphasizes that it is an input
section (this is one place in the code where we are dealing with both
input sections and output sections at the same time so that extra
emphasis makes it a bit clearer).
llvm-svn: 289748
Most of the PowerPC64 code generation already creates PIC access. This
changes to a full PIC default, similar to what GCC is doing.
Overall, a monolithic clang binary shrinks by 600KB (about 1%). This can
be a slight regression for TLS access and will use the TOC more
aggressively instead of synthesizing immediates. It is expected to be
performance neutral.
Differential Revision: https://reviews.llvm.org/D26564
llvm-svn: 289744
Most of the PowerPC64 code generation for the ELF ABI is already PIC.
There are four main exceptions:
(1) Constant pointer arrays etc. should in writeable sections.
(2) The TOC restoration NOP after a call is needed for all global
symbols. While GNU ld has a workaround for questionable GCC self-calls,
we trigger the checks for calls from COMDAT sections as they cross input
sections and are therefore not considered self-calls. The current
decision is questionable and suboptimal, but outside the scope of the
change.
(3) TLS access can not use the initial-exec model.
(4) Jump tables should use relative addresses. Note that the current
encoding doesn't work for the large code model, but it is more compact
than the default for any non-trivial jump table. Improving this is again
beyond the scope of this change.
At least (1) and (3) are assumptions made in target-independent code and
introducing additional hooks is a bit messy. Testing with clang shows
that a -fPIC binary is 600KB smaller than the corresponding -fno-pic
build. Separate testing from improved jump table encodings would explain
only about 100KB or so. The rest is expected to be a result of more
aggressive immediate forming for -fno-pic, where the -fPIC binary just
uses TOC entries.
This change brings the LLVM output in line with the GCC output, other
PPC64 compilers like XLC on AIX are known to produce PIC by default
as well. The relocation model can still be provided explicitly, i.e.
when using MCJIT.
One test case for case (1) is included, other test cases with relocation
mode sensitive behavior are wired to static for now. They will be
reviewed and adjusted separately.
Differential Revision: https://reviews.llvm.org/D26566
llvm-svn: 289743
I've chosen to remove NVPTXInstrInfo::CanTailMerge but not
NVPTXInstrInfo::isLoadInstr and isStoreInstr (which are also dead)
because while the latter two are reasonably useful utilities, the former
cannot be used safely: It relies on successful address space inference
to identify writes to shared memory, but addrspace inference is a
best-effort thing.
llvm-svn: 289740
The original motivation for this patch comes from wanting to canonicalize
more IR to selects and also canonicalizing min/max.
If we're going to do that, we need more backend fixups to undo select codegen
when simpler ops will do. I chose AArch64 for the tests because that shows the
difference in the simplest way. This should fix:
https://llvm.org/bugs/show_bug.cgi?id=31175
Differential Revision: https://reviews.llvm.org/D27489
llvm-svn: 289738
In list::remove we collect the nodes we're removing in a seperate
list instance. However we construct this list using the default
constructor which default constructs the allocator. However allocators
are not required to be default constructible. This patch fixes the
construction of the second list.
llvm-svn: 289735
test/std/containers/container.adaptors/queue/queue.cons.alloc/ctor_container_alloc.pass.cpp
test/std/containers/container.adaptors/stack/stack.cons.alloc/ctor_container_alloc.pass.cpp
Iterate with C::size_type because that's what operator[] takes.
test/std/containers/sequences/vector/contiguous.pass.cpp
test/std/strings/basic.string/string.require/contiguous.pass.cpp
Add static_cast<typename C::difference_type> because that's what the iterator's operator+ takes.
Fixes D27777.
llvm-svn: 289734
When getting attributes it is sometimes nicer to use Optional<T> some of the time instead of magic values. I tried to cut over to only using the Optional values but it made many of the call sites very messy, so it makes sense the leave in the calls that can return a default value. Otherwise code that looks like this:
uint64_t CallColumn = Die.getAttributeValueAsAddress(DW_AT_call_line, 0);
Has to be turned into:
uint64_t CallColumn = 0;
if (auto CallColumnValue = Die.getAttributeValueAsAddress(DW_AT_call_line))
CallColumn = *CallColumnValue;
The first snippet of code looks much better. But in cases where you want an offset that may or may not be there, the following code looks better:
if (auto StmtOffset = Die.getAttributeValueAsSectionOffset(DW_AT_stmt_list)) {
// Use StmtOffset
}
Differential Revision: https://reviews.llvm.org/D27772
llvm-svn: 289731
Summary:
Previously they were defined as a 2D char array in a header file. This
is kind of overkill -- we can let the linker lay out these strings
however it pleases. While we're at it, we might as well just inline
these constants where they're used, as each of them is used only once.
Also move NVPTXUtilities.{h,cpp} into namespace llvm.
Reviewers: tra
Subscribers: jholewinski, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27636
llvm-svn: 289728
Summary:
The standard requires tuple have the following constructors:
```
tuple(tuple<OtherTypes...> const&);
tuple(tuple<OtherTypes...> &&);
tuple(pair<T1, T2> const&);
tuple(pair<T1, T2> &&);
tuple(array<T, N> const&);
tuple(array<T, N> &&);
```
However libc++ implements these as a single constructor with the signature:
```
template <class TupleLike, enable_if_t<__is_tuple_like<TupleLike>::value>>
tuple(TupleLike&&);
```
This causes the constructor to reject types derived from tuple-like types; Unlike if we had all of the concrete overloads, because they cause the derived->base conversion in the signature.
This patch fixes this issue by detecting derived types and the tuple-like base they are derived from. It does this by creating an overloaded function with signatures for each of tuple/pair/array and checking if the possibly derived type can convert to any of them.
This patch fixes [PR17550]( https://llvm.org/bugs/show_bug.cgi?id=17550)
This patch
Reviewers: mclow.lists, K-ballo, mpark, EricWF
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27606
llvm-svn: 289727
Summary: SampleProfileLoader pass may be invoked twice by LTO. The 2nd pass should not append more summary info as it is already preset by the 1st pass.
Reviewers: eraman, davidxl
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D27733
llvm-svn: 289725
Also, udpate the ~60 failing tests in the tree which did
not contain a valid datalayout.
This fixes PR31123. lld will be updated in a following patch,
immediately after this is committed.
Differential Revision: https://reviews.llvm.org/D27082
llvm-svn: 289719
Summary:
We used to create SampleProfileLoader pass in clang. This makes LTO/ThinLTO unable to add this pass in the linker plugin. This patch moves the SampleProfileLoader pass creation from
clang to llvm pass manager builder.
Reviewers: tejohnson, davidxl, dnovillo
Subscribers: mehdi_amini, cfe-commits
Differential Revision: https://reviews.llvm.org/D27744
llvm-svn: 289715
Summary: We used to create SampleProfileLoader pass in clang. This makes LTO/ThinLTO unable to add this pass in the linker plugin. This patch moves the SampleProfileLoader pass creation from clang to llvm pass manager builder.
Reviewers: tejohnson, davidxl, dnovillo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D27743
llvm-svn: 289714
LLDB needs some minor changes to adopt PrettyStackTrace after https://reviews.llvm.org/D27683.
We remove our own SetCrashDescription() function and use LLVM-provided RAII objects instead.
We also make sure LLDB doesn't define __crashtracer_info__ which would collide with LLVM's definition.
Differential Revision: https://reviews.llvm.org/D27735
llvm-svn: 289711
No code changes were needed, but I updated a few tests.
Also resolved P0509 and P0521, which required no changes to the library or tests.
This patch was reverted due to llvm.org/PR31016. There is a bug in Clang 3.7
which causes default.pass.cpp to fails. That test is now marked as XFAIL for that
clang version.
This patch was originally authored by Marshall Clow.
llvm-svn: 289708
Remove the includes of <llvm/Config/config.h> private LLVM header.
The relevant files seem not to use any definitions from that file,
and it is not available when building against installed LLVM.
The use in lib/ReaderWriter/MachO/MachOLinkingContext.cpp originates
from rL218718, and the use in ELF/Strings.cpp from rL274804 (where it
was moved from Symbols.cpp). In both cases, they were added as a part of
demangling support, and they provided HAVE_CXXABI_H.
Since we are now using the LLVM demangler library instead, the code was
removed and the includes and no longer necessary.
Differential Revision: https://reviews.llvm.org/D27757
llvm-svn: 289707
Given that INSERT_VECTOR_ELT operates on D registers anyway, combining
64-bit vectors into a 128-bit vector is basically free. Therefore, try
to split BUILD_VECTOR nodes before giving up and lowering them to a series
of INSERT_VECTOR_ELT instructions. Sometimes this allows dramatically
better lowerings; see testcases for examples. Inspired by similar code
in the x86 backend for AVX.
Differential Revision: https://reviews.llvm.org/D27624
llvm-svn: 289706
If all the operands to a phi node are compares that have a RHS constant,
instcombine will try to pull them through the phi node, combining them into
a single operation. When it does this, the debug location of the new op
should be the merged debug locations of the phi node arguments.
Patch 8 of 8 for D26256. Folding of a compare that has a RHS constant.
Differential Revision: https://reviews.llvm.org/D26256
llvm-svn: 289704
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289703
This way it will be easier to expand DIFile (e.g., to contain checksum) without the need to modify the createCompileUnit() API.
Reviewers: llvm-commits, rnk
Differential Revision: https://reviews.llvm.org/D27762
llvm-svn: 289702
This way it will be easier to expand DIFile (e.g., to contain checksum) without the need to modify the createCompileUnit() API.
Reviewers: cfe-commits, rnk
Differential Revision: https://reviews.llvm.org/D27763
llvm-svn: 289701
Eli Friedman