Previously we had knowledge of how to serialize and deserialize
a string table inside of DebugInfo/PDB, but the string table
that it serializes contains a piece that is actually considered
CodeView and can appear outside of a PDB. We already have logic
in llvm-readobj and MCCodeView to read and write this format,
so it doesn't make sense to duplicate the logic in DebugInfoPDB
as well.
This patch makes codeview::StringTable (for writing) and
codeview::StringTableRef (for reading), updates DebugInfoPDB
to use these classes for its own writing, and updates llvm-readobj
to additionally use StringTableRef for reading.
It's a bit more difficult to get MCCodeView to use this for
writing, but it's a logical next step.
llvm-svn: 301986
This patch verifies the .debug_line:
- verify all addresses in a line table sequence have ascending addresses
- verify that all line table file indexes are valid
Unit tests added for both cases.
Differential Revision: https://reviews.llvm.org/D32765
llvm-svn: 301984
The directory and file tables now have form-based content descriptors.
Parse these and extract the per-directory/file records based on the
descriptors. For now we support only DW_FORM_string (inline) for the
path names; follow-up work will add support for indirect forms (i.e.,
DW_FORM_strp, strx<N>, and line_strp).
Differential Revision: http://reviews.llvm.org/D32713
llvm-svn: 301978
LTO and other fancy linking previously led to DWARF that contained invalid references. We already validate that CU relative references fall into the CU, and the DW_FORM_ref_addr references fall inside the .debug_info section, but we didn't validate that the references pointed to correct DIE offsets. This new verification will ensure that all references refer to actual DIEs and not an offset in between.
This caught a bug in DWARFUnit::getDIEForOffset() where if you gave it any offset, it would match the DIE that mathes the offset _or_ the next DIE. This has been fixed.
Differential Revision: https://reviews.llvm.org/D32722
llvm-svn: 301971
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
Previously we wrote line information and file checksum
information, but we did not write information about inlinee
lines and functions. This patch adds support for that.
llvm-svn: 301936
lldb-dwarfdump gets a new "--verify" option that will verify a single file's DWARF debug info and will print out any errors that it finds. It will return an non-zero exit status if verification fails, and a zero exit status if verification succeeds. Adding the --quiet option will suppress any output the STDOUT or STDERR.
The first part of the verify does the following:
- verifies that all CU relative references (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata) have valid CU offsets
- verifies that all DW_FORM_ref_addr references have valid .debug_info offsets
- verifies that all DW_AT_ranges attributes have valid .debug_ranges offsets
- verifies that all DW_AT_stmt_list attributes have valid .debug_line offsets
- verifies that all DW_FORM_strp attributes have valid .debug_str offsets
Unit tests were added for each of the above cases.
Differential Revision: https://reviews.llvm.org/D32707
llvm-svn: 301844
In preparation for introducing writing capabilities for each of
these classes, I would like to adopt a Foo / FooRef naming
convention, where Foo indicates that the class can manipulate and
serialize Foos, and FooRef indicates that it is an immutable view of
an existing Foo. In other words, Foo is a writer and FooRef is a
reader. This patch names some existing readers to conform to the
FooRef convention, while offering no functional change.
llvm-svn: 301810
There is a lot of duplicate code for printing line info between
YAML and the raw output printer. This introduces a base class
that can be shared between the two, and makes some minor
cleanups in the process.
llvm-svn: 301728
The llvm-readobj parsing code currently exists in our CodeView
library, so we use that to parse instead of re-writing the logic
in the tool.
llvm-svn: 301718
There was a garbage character in output introduced by myself in
r290040 "[DWARF] - Introduce DWARFDebugPubTable class for dumping pub* sections."
llvm-svn: 301631
Previously parsing of these were all grouped together into a
single master class that could parse any type of debug info
fragment.
With writing forthcoming, the complexity of each individual
fragment is enough to warrant them having their own classes so
that reading and writing of each fragment type can be grouped
together, but isolated from the code for reading and writing
other fragment types.
In doing so, I found a place where parsing code was duplicated
for the FileChecksums fragment, across llvm-readobj and the
CodeView library, and one of the implementations had a bug.
Now that the codepaths are merged, the bug is resolved.
Differential Revision: https://reviews.llvm.org/D32547
llvm-svn: 301557
We have a lot of very similarly named classes related to
dealing with module debug info. This patch has NFC, it just
renames some classes to be more descriptive (albeit slightly
more to type). The mapping from old to new class names is as
follows:
Old | New
ModInfo | DbiModuleDescriptor
ModuleSubstream | ModuleDebugFragment
ModStream | ModuleDebugStream
With the corresponding Builder classes renamed accordingly.
Differential Revision: https://reviews.llvm.org/D32506
llvm-svn: 301555
It is useful to output size of ranges when address ranges
section of .gdb_index is dumped.
It helps to compare outputs produced by different linkers,
for example. In that case address ranges can look very different,
when they are the same at fact. Difference comes from different
low address because of different address of .text.
Differential revision: https://reviews.llvm.org/D32492
llvm-svn: 301527
We were already parsing and dumping this to the human readable
format, but not to the YAML format. This does so, in preparation
for reading it in and reconstructing the line information from
YAML.
llvm-svn: 301357
This reworks the way virtual bases are handled, and also the way
padding is detected across multiple levels of aggregates, producing
a much more accurate result.
llvm-svn: 301203
I found this when investigated "Bug 32319 - .gdb_index is broken/incomplete" for LLD.
When we have object file with .debug_ranges section it may be filled with zeroes.
Relocations are exist in file to relocate this zeroes into real values later, but until that
a pair of zeroes is treated as terminator. And DWARF parser thinks there is no ranges at all
when I am trying to collect address ranges for building .gdb_index.
Solution implemented in this patch is to take relocations in account when parsing ranges.
Differential revision: https://reviews.llvm.org/D32228
llvm-svn: 301170
This is splitted from D32228,
currently DWARF parsers code has few places that applied relocations values manually.
These places has similar duplicated code. Patch introduces separate method that can be
used to obtain relocated value. That helps to reduce code and simplifies things.
Differential revision: https://reviews.llvm.org/D32284
llvm-svn: 300956
Summary:
In the current implementation, to find inline stack for an address incurs expensive linear search in 2 places:
* linear search for the top-level DIE
* recursive linear traverse the DIE tree to find the path to the leaf DIE
In this patch, a map is built from address to its corresponding leaf DIE. The inline stack is built by traversing from the leaf DIE up to the root DIE. This speeds up batch symbolization by ~10X without noticible memory overhead.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32177
llvm-svn: 300742
Summary:
In the current implementation, to find inline stack for an address incurs expensive linear search in 2 places:
* linear search for the top-level DIE
* recursive linear traverse the DIE tree to find the path to the leaf DIE
In this patch, a map is built from address to its corresponding leaf DIE. The inline stack is built by traversing from the leaf DIE up to the root DIE. This speeds up batch symbolization by ~10X without noticible memory overhead.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32177
llvm-svn: 300697
In a followup patch I intend to introduce an additional dumping
mode which dumps a graphical representation of a class's layout.
In preparation for this, the text-based layout printer needs to
be split out from the graphical layout printer, and both need
to be able to use the same code for printing the intro and outro
of a class's definition (e.g. base class list, etc).
This patch does so, and in the process introduces a skeleton
definition for the graphical printer, while currently making
the graphical printer just print nothing.
NFC
llvm-svn: 300134
Previously the dumping of class definitions was very primitive,
and it made it hard to do more than the most trivial of output
formats when dumping. As such, we would only dump one line for
each field, and then dump non-layout items like nested types
and enums.
With this patch, we do a complete analysis of the object
hierarchy including aggregate types, bases, virtual bases,
vftable analysis, etc. The only immediately visible effects
of this are that a) we can now dump a line for the vfptr where
before we would treat that as padding, and b) we now don't
treat virtual bases that come at the end of a class as padding
since we have a more detailed analysis of the class's storage
usage.
In subsequent patches, we should be able to use this analysis
to display a complete graphical view of a class's layout including
recursing arbitrarily deep into an object's base class / aggregate
member hierarchy.
llvm-svn: 300133
This change is basically relative to D31136, where I initially wanted to
implement some relocations handling optimization which shows it can give
significant boost. Though even without any caching algorithm looks
code can have some cleanup at first.
Refactoring separates out code for taking symbol address, used in relocations
computation.
Differential revision: https://reviews.llvm.org/D31747
llvm-svn: 300039
Summary:
This lets PDB readers lookup type record data by type index in O(log n)
time. It also enables makes `cvdump -t` work on PDBs produced by LLD.
cvdump will not dump a PDB that doesn't have an index-to-offset table.
The table is sorted by type index, and has an entry every 8KB. Looking
up a type record by index is a binary search of this table, followed by
a scan of at most 8KB.
Reviewers: ruiu, zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31636
llvm-svn: 299958
* Adds support for pointers to arrays, which was missing
* Adds some tests
* Improves consistency of const and volatile qualifiers
* Eliminates non-composable special case code for arrays and function by using
a more general recursive approach
* Has a hack for getting the calling convention into the right spot for
pointer-to-functions
Given the rapid changes happenning in llvm-pdbdump, this may be difficult to
merge.
Differential Revision: https://reviews.llvm.org/D31832
llvm-svn: 299848
1. Added some asserts to make sure concrete symbol types don't
get constructed with RawSymbols that have an incompatible
SymTag enum value.
2. Added new forwarding macros that auto-define an Id/Sym method
pair whenever there is a method that returns a SymIndexId.
Previously we would just provide one method that returned only
the SymIndexId and it was up to the caller to use the Session
object to get a pointer to the symbol. Now we automatically
get both the method that returns the Id, as well as a method
that returns the pointer directly with just one macro.
3. Added some methods for dumping straight to stdout that can
be used from inside the debugger for diagnostics during a
debug session.
4. Added a clone() method and a cast<T>() method to PDBSymbol
that can shorten some usage patterns.
llvm-svn: 299831
Summary:
The TypeTableBuilder provides stable storage for type records. We don't
need to copy all of the bytes into a flat vector before adding it to the
TpiStreamBuilder.
This makes addTypeRecord take an ArrayRef<uint8_t> and a hash code to go
with it, which seems like a simplification.
Reviewers: ruiu, zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31634
llvm-svn: 299406
Summary:
MASM can produce type streams that are not topologically sorted. It can
even produce type streams with circular references, but those are not
common in practice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31629
llvm-svn: 299403
This assert is just trying to test that processing each record adds
exactly one entry to the index map. The assert logic was wrong when the
first record in the type stream was a field list.
I've simplified the code by moving the LF_FIELDLIST-specific logic into
the callback for that record type.
llvm-svn: 299035
This should work on all platforms now that r299006 has landed. Tested locally
on Windows and Linux.
This moves exe symbol-specific method implementations out of NativeRawSymbol
into a concrete subclass. Also adds implementations for hasCTypes and
hasPrivateSymbols and a simple test to ensure the native reader can access the
summary information for the executable from the PDB.
Original Differential Revision: https://reviews.llvm.org/D31059
llvm-svn: 299019
Summary: MSVC does this when producing a PDB.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31316
llvm-svn: 298717
Summary:
When dumping these records from an object file section, we should use
only one type database. However, when dumping from a PDB, we should use
two: one for the type stream and one for the IPI stream.
Certain type records that normally live in the .debug$T object file
section get moved over to the IPI stream of the PDB file and they get
new indices.
So far, I've noticed that the MSVC linker always moves these records
into IPI:
- LF_FUNC_ID
- LF_MFUNC_ID
- LF_STRING_ID
- LF_SUBSTR_LIST
- LF_BUILDINFO
- LF_UDT_MOD_SRC_LINE
These records have index fields that can point into TPI or IPI. In
particular, LF_SUBSTR_LIST and LF_BUILDINFO point to LF_STRING_ID
records to describe compilation command lines.
I've modified the dumper to have an optional pointer to the item DB, and
to do type name lookup of these fields in that DB. See printItemIndex.
The result is that our pdbdump-headers.test is more faithful to the PDB
contents and the output is less confusing.
Reviewers: ruiu
Subscribers: amccarth, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D31309
llvm-svn: 298649
Reverting until I can figure out the root cause.
Revert "Re-land: Make NativeExeSymbol a concrete subclass of NativeRawSymbol [PDB]"
This reverts commit f461a70cc376f0f91c8b4917be79479cc86330a5.
llvm-svn: 298626
The new test should pass on all platforms now that llvm-pdbdump has the
`-color-output` option.
This moves exe symbol-specific method implementations out of NativeRawSymbol
into a concrete subclass. Also adds implementations for hasCTypes and
hasPrivateSymbols and a simple test to ensure the native reader can access
the summary information for the executable from the PDB.
Original Differential Revision: https://reviews.llvm.org/D31059
llvm-svn: 298623
Summary:
This removes the 'remapTypeIndices' method on every TypeRecord class. My
original idea was that this would be the beginning of some kind of
generic entry point that would enumerate all of the TypeIndices inside
of a TypeRecord, so that we could write generic graph algorithms for
them without duplicating the knowledge of which fields are type index
fields everywhere. This never happened, and nothing else uses this
method. I need to change the API to deal with merging into IPI streams,
so let's move it into the file that uses it first.
Reviewers: zturner, ruiu
Reviewed By: zturner, ruiu
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D31267
llvm-svn: 298564
They are structurally the same, but now we need to distinguish them
because one record lives in the IPI stream and the other lives in TPI.
llvm-svn: 298474
This was originally reported in pr32249, uncovered by PTVS-Studio.
There was no code coverage for this path because it was
difficult to construct odd-case PDB files that were not generated
by cl.
Now that we can write construct minimal PDB files from YAML,
it's easy to construct fragments that generate whatever we want.
In this patch I add a test that creates 2 type records. One
with a unique name, and one without. I verify that we can go
from PDB to Yaml with no errors. In a future patch I'd like
to add something like llvm-pdbdump raw -lookup-type that will
just dump one record and nothing else, which should make it
a bit cleaner to find this kind of thing.
llvm-svn: 298017
This moves exe symbol-specific method implementations out of NativeRawSymbol
into a concrete subclass. Also adds implementations for hasCTypes and
hasPrivateSymbols and a simple test to ensure the native reader can access
the summary information for the executable from the PDB.
Differential Revision: https://reviews.llvm.org/D31059
llvm-svn: 298005
This was discovered when running `llvm-pdbdump diff` against
two files, the second of which was generated by running the
first one through pdb2yaml and then yaml2pdb.
The second one was missing some bytes from the PDB Stream, and
tracking this down showed that at the end of the PDB Stream were
some additional bytes that we were ignoring. Looking back
to the reference code, these seem to specify some additional
flags that indicate whether the PDB supports various optional
features.
This patch adds support for reading, writing, and round-tripping
these flags through YAML and the raw dumper, and updates the
tests accordingly.
llvm-svn: 297984
In doing so I discovered that we completely ignore some bytes
of the PDB Stream after we "finish" loading it. These bytes
seem to specify some additional information about what kind
of data is present in the PDB. A subsequent patch will add
code to read in those fields and store their values.
llvm-svn: 297983
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
Together, these allow lldb-pdbdump to list all the modules from a PDB using a
native reader (rather than DIA).
Note that I'll probably be specializing NativeRawSymbol in a subsequent patch.
Differential Revision: https://reviews.llvm.org/D30956
llvm-svn: 297883
Previously we could round-trip type records from PDB -> Yaml ->
PDB, but for symbols we could only go from PDB -> Yaml. This
completes the round-tripping for symbols as well.
llvm-svn: 297625
Some late additions to DWARF v5 were not in Dwarf.def; also one form
was redefined. Add the new cases to relevant switches in different
parts of LLVM. Replace DW_FORM_ref_sup with DW_FORM_ref_sup[4,8].
I did not add support for DW_FORM_strx3/addrx3 other that defining the
constants. We don't have any infrastructure to support these.
Differential Revision: http://reviews.llvm.org/D30664
llvm-svn: 297085
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Requesting DWARF v5 will now get you the new compile-unit and
type-unit headers. llvm-dwarfdump will also recognize them.
Differential Revision: http://reviews.llvm.org/D30206
llvm-svn: 296514
Before the endianness was specified on each call to read
or write of the StreamReader / StreamWriter, but in practice
it's extremely rare for streams to have data encoded in
multiple different endiannesses, so we should optimize for the
99% use case.
This makes the code cleaner and more general, but otherwise
has NFC.
llvm-svn: 296415
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
llvm-svn: 296394
r296215, "[PDB] General improvements to Stream library."
r296217, "Disable BinaryStreamTest.StreamReaderObject temporarily."
r296220, "Re-enable BinaryStreamTest.StreamReaderObject."
r296244, "[PDB] Disable some tests that are breaking bots."
r296249, "Add static_cast to silence -Wc++11-narrowing."
std::errc::no_buffer_space should be used for OS-oriented errors for socket transmission.
(Seek discussions around llvm/xray.)
I could substitute s/no_buffer_space/others/g, but I revert whole them ATM.
Could we define and use LLVM errors there?
llvm-svn: 296258
When dumping .debug_info section we loop through all attributes mentioned in
.debug_abbrev section and dump values using DWARFFormValue::extractValue().
We need to skip implicit_const attributes here as their values are not
really located in .debug_info but directly in .debug_abbrev. This patch fixes
triggered assert() in DWARFFormValue::extractValue() caused by trying to
access implicit_const values from .debug_info.
llvm-svn: 296253
This adds various new functionality and cleanup surrounding the
use of the Stream library. Major changes include:
* Renaming of all classes for more consistency / meaningfulness
* Addition of some new methods for reading multiple values at once.
* Full suite of unit tests for reader / writer functionality.
* Full set of doxygen comments for all classes.
* Streams now store their own endianness.
* Fixed some bugs in a few of the classes that were discovered
by the unit tests.
llvm-svn: 296215
This is part of a larger effort to get the Stream code moved
up to Support. I don't want to do it in one large patch, in
part because the changes are so big that it will treat everything
as file deletions and add, losing history in the process.
Aside from that though, it's just a good idea in general to
make small changes.
So this change only changes the names of the Stream related
source files, and applies necessary source fix ups.
llvm-svn: 296211
This allows the ability to call IPDBSession::getGlobalScope with a NativeSession and
to then query it for some basic fields from the PDB's InfoStream.
Note that the symbols now have non-const references back to the Session so that
NativeRawSymbol can access the PDBFile through the Session.
Differential Revision: https://reviews.llvm.org/D30314
llvm-svn: 296049
Some PDBs or object files can contain references to other PDBs
where the real type information lives. When this happens,
all type indices in the original PDB are meaningless because
their records are not there.
With this patch we add the ability to pull type info from those
secondary PDBs.
Differential Revision: https://reviews.llvm.org/D29973
llvm-svn: 295382
This is a stub for a new concrete implementation of IPDBRawSymbol.
Nothing uses this uses this implementation yet. My plan is to
locally switch lldb-pdbdump from the DIA reader to the Native one
and flesh out the implementations of these method stubs in the order
they're needed.
llvm-svn: 294633
DWARF info contains info about the line number at which a function starts (DW_AT_decl_line).
This patch creates a function to look up the start line number for a function, and returns it in
DILineInfo when looking up debug info for a particular address.
Patch by Simon Que!
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D27962
llvm-svn: 294231
Previously, mergeTypeStreams returns only true or false, so it was
impossible to know the reason if it failed. This patch changes the
function signature so that it returns an Error object.
Differential Revision: https://reviews.llvm.org/D29362
llvm-svn: 293820
This introduces the `analyze` subcommand. For now there is only
one option, to analyze hash collisions in the type streams. In
the future, however, we could add many more things here, such
as performing size analyses, compacting, and statistics about
the type of records etc.
llvm-svn: 293795
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
This is not a list of pairs, it is a hash table data structure. We now
correctly parse this out and dump it from llvm-pdbdump.
We still need to understand the conditions that lead to a type
getting an entry in the hash adjuster table. That will be done
in a followup investigation / patch.
Differential Revision: https://reviews.llvm.org/D29090
llvm-svn: 293090
While the builder pattern has proven useful for certain other
larger types, in this case it was hampering the ability to use
the data structure, as for runtime access we need a map that
we can efficiently read from and write to. So the two are merged
into a single data structure that can efficiently be read to,
written from, deserialized from bytes, and serialized to bytes.
llvm-svn: 292664
Summary: This patch adds some new APIs to enable using the YAML DWARF representation in unit tests. The most basic new API is DWARFYAML::EmitDebugSections which converts a YAML string into a series of owned MemoryBuffer objects stored in a StringMap. The string map can then be used to construct a DWARFContext for parsing in place of an ObjectFile.
Reviewers: dblaikie, clayborg
Subscribers: mgorny, fhahn, jgosnell, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D28828
llvm-svn: 292634
This was being parsed / serialized ad-hoc inside the code
for a specific PDB stream. But this data structure is used
in multiple ways / places within the PDB format. To be able
to re-use it we need to raise this code out and make it more
generic. In doing so, a number of bugs are fixed in the
original implementation, and support is added for growing
the hash table and deleting items from the hash table,
which had either been omitted or incorrect implemented in
the initial version.
Differential Revision: https://reviews.llvm.org/D28715
llvm-svn: 292535
This patch adds a new class NameHashTableBuilder which creates /names streams.
This patch contains a test to confirm that a stream created by
NameHashTableBuilder can be read by NameHashTable reader class.
Differential Revision: https://reviews.llvm.org/D28707
llvm-svn: 292040
This allows us efficiently look for more than one attribute, something that is quite common in DWARF consumption.
Differential Revision: https://reviews.llvm.org/D28704
llvm-svn: 291967
Removed all DWARFDie::getAttributeValueAs*() calls.
Renamed:
Optional<DWARFFormValue> DWARFDie::getAttributeValue(dwarf::Attribute);
To:
Optional<DWARFFormValue> DWARFDie::find(dwarf::Attribute);
Added:
Optional<DWARFFormValue> DWARFDie::findRecursively(dwarf::Attribute);
All decoding of Optional<DWARFFormValue> values are now done using the dwarf::to*() functions from DWARFFormValue.h:
Old code:
auto DeclLine = DWARFDie.getAttributeValueAsSignedConstant(DW_AT_decl_line).getValueOr(0);
New code:
auto DeclLine = toUnsigned(DWARFDie.find(DW_AT_decl_line), 0);
This composition helps us since we can now easily do:
auto DeclLine = toUnsigned(DWARFDie.findRecursively(DW_AT_decl_line), 0);
This allows us to easily find attribute values in the current DIE only (the first new code above) or in any DW_AT_abstract_origin or DW_AT_specification Dies using the line above. Note that the code line length is shorter and more concise.
Differential Revision: https://reviews.llvm.org/D28581
llvm-svn: 291959
Previously the type dumper itself was passed around to a lot of different
places and manipulated in ways that were more appropriate on the type
database. For example, the entire TypeDumper was passed into the symbol
dumper, when all the symbol dumper wanted to do was lookup the name of a
TypeIndex so it could print it. That's what the TypeDatabase is for --
mapping type indices to names.
Another example is how if the user runs llvm-pdbdump with the option to
dump symbols but not types, we still have to visit all types so that we
can print minimal information about the type of a symbol, but just without
dumping full symbol records. The way we did this before is by hacking it
up so that we run everything through the type dumper with a null printer,
so that the output goes to /dev/null. But really, we don't need to dump
anything, all we want to do is build the type database. Since
TypeDatabaseVisitor now exists independently of TypeDumper, we can do
this. We just build a custom visitor callback pipeline that includes a
database visitor but not a dumper.
All the hackery around printers etc goes away. After this patch, we could
probably even delete the entire CVTypeDumper class since really all it is
at this point is a thin wrapper that hides the details of how to build a
useful visitation pipeline. It's not a priority though, so CVTypeDumper
remains for now.
After this patch we will be able to easily plug in a different style of
type dumper by only implementing the proper visitation methods to dump
one-line output and then sticking it on the pipeline.
Differential Revision: https://reviews.llvm.org/D28524
llvm-svn: 291724
Now we only support returning Optional<> values and have changed all clients over to use Optional::getValueOr().
Differential Revision: https://reviews.llvm.org/D28569
llvm-svn: 291686
Decompressor intention is to reduce duplication of code.
Currently LLD has own implementation of decompressor
for compressed debug sections.
This class helps to avoid it and share the code.
LLD patch for reusing it is D28106
Differential revision: https://reviews.llvm.org/D28105
llvm-svn: 291675
We were starting to get some name clashes between llvm-pdbdump
and the common CodeView framework, so I took this opportunity
to rename a bunch of files to more accurately describe their
usage. This also helps in llvm-pdbdump to distinguish
between different files and whether they are used for pretty
dump mode or raw dump mode.
llvm-svn: 291627
This creates a centralized class in which to store type records.
It stores types as an array of entries, which matches the
notion of a type stream being a topologically sorted DAG.
Logic to build up such a database was already being used in
CVTypeDumper, so CVTypeDumper is now updated to to read from
a TypeDatabase which is filled out by an earlier visitor in
the pipeline.
Differential Revision: https://reviews.llvm.org/D28486
llvm-svn: 291626
Support for DW_FORM_implicit_const DWARFv5 feature.
When this form is used attribute value goes to .debug_abbrev section (as SLEB).
As this form would break any debug tool which doesn't support DWARFv5
it is guarded by dwarf version check. Attempt to use this form with
dwarf version <= 4 is considered a fatal error.
Differential Revision: https://reviews.llvm.org/D28456
llvm-svn: 291599
Add an explicit LLVM_ENABLE_DIA_SDK option to control building support
for DIA SDK-based debugging. Control its value to match whether DIA SDK
support was found and expose it in LLVMConfig (alike LLVM_ENABLE_ZLIB).
Its value is needed for LLDB to determine whether to run tests requiring
DIA support. Currently it is obtained from llvm/Config/config.h;
however, this file is not available for standalone builds. Following
this change, LLDB will be modified to use the value from LLVMConfig.
Differential Revision: https://reviews.llvm.org/D26255
llvm-svn: 290818
This patch adds support for YAML<->DWARF for debug_info sections.
This re-lands r290147, reverted in 290148, re-landed in r290204 after fixing the issue that caused bots to fail (thank you UBSan!), and reverted again in r290209 due to failures on big endian systems.
After adding support for preserving endianness, this should be good now.
llvm-svn: 290386
In order for the llvm DWARF parser to be used in LLDB we will need to be able to get the parent of a DIE. This patch adds that functionality by changing the DWARFDebugInfoEntry class to store a depth field instead of a sibling index. Using a depth field allows us to easily calculate the sibling and the parent without increasing the size of DWARFDebugInfoEntry.
I tested llvm-dsymutil on a debug version of clang where this fully parses DWARF in over 1200 .o files to verify there was no serious regression in performance.
Added a full suite of unit tests to test this functionality.
Differential Revision: https://reviews.llvm.org/D27995
llvm-svn: 290274
This patch adds support for YAML<->DWARF for debug_info sections.
This re-lands r290147, after fixing the issue that caused bots to fail (thank you UBSan!).
llvm-svn: 290204
DWARF 4 and later supports encoding the PC as an address or as as offset from the low PC. Clients using DWARFDie should be insulated from how to extract the high PC value. This function takes care of extracting the form value and looking for the correct form.
Differential Revision: https://reviews.llvm.org/D27885
llvm-svn: 290131
Long is not the same size across a number of the platforms we support.
Use unsigned int here instead, it is more appropriate because
overflow/wrap-around is possible and, in this case, expected.
llvm-svn: 290068
Patch implements parser of pubnames/pubtypes tables instead of static
function used before. It is now should be possible to reuse it
in LLD or other projects and clean up the duplication code.
Differential revision: https://reviews.llvm.org/D27851
llvm-svn: 290040
This is the 3rd of 3 patches to get reading and writing of
CodeView symbol and type records to use a single codepath.
Differential Revision: https://reviews.llvm.org/D26427
llvm-svn: 289978
Reverting because this breaks lld's gdb_index support - it's probably
double counting the abbrev relocation offset.
This reverts commit r289954.
llvm-svn: 289961
Input can be produced by ld -r, for example (a normal LLVM workflow
never hits this - LLVM only ever produces a single abbrev table in an
object (shared by multiple CUs), so the reloc's always 0, and when it's
linked together the relocation's resolved so it doesn't need to be
handled)
llvm-svn: 289954
When getting attributes it is sometimes nicer to use Optional<T> some of the time instead of magic values. I tried to cut over to only using the Optional values but it made many of the call sites very messy, so it makes sense the leave in the calls that can return a default value. Otherwise code that looks like this:
uint64_t CallColumn = Die.getAttributeValueAsAddress(DW_AT_call_line, 0);
Has to be turned into:
uint64_t CallColumn = 0;
if (auto CallColumnValue = Die.getAttributeValueAsAddress(DW_AT_call_line))
CallColumn = *CallColumnValue;
The first snippet of code looks much better. But in cases where you want an offset that may or may not be there, the following code looks better:
if (auto StmtOffset = Die.getAttributeValueAsSectionOffset(DW_AT_stmt_list)) {
// Use StmtOffset
}
Differential Revision: https://reviews.llvm.org/D27772
llvm-svn: 289731
Adds a "Discriminator" field to struct DILineInfo, which defaults to 0.
Fills out the "Discriminator" field in DILineInfo in DWARFDebugLine::LineTable::getFileLineInfoForAddress().
in order to have a slightly nicer interface in getFileLineInfoForAddress.
Patch by Simon Que!
Differential Revision: https://reviews.llvm.org/D27649
llvm-svn: 289683
Many places pass around a DWARFDebugInfoEntryMinimal and a DWARFUnit. It is easy to get things wrong by using the wrong DWARFUnit with a DWARFDebugInfoEntryMinimal. This patch creates a DWARFDie class that contains the DWARFUnit and DWARFDebugInfoEntryMinimal objects so that they can't get out of sync. All attribute extraction has been moved out of DWARFDebugInfoEntryMinimal and into DWARFDie. DWARFDebugInfoEntryMinimal was also renamed to DWARFDebugInfoEntry.
DWARFDie objects are temporary objects that are used by clients and contain 2 pointers that you always need to have anyway. Keeping them grouped will avoid errors and simplify many of the attribute extracting APIs by not having to pass in a DWARFUnit.
Differential Revision: https://reviews.llvm.org/D27634
llvm-svn: 289565
The only tests we have for the DWARF parser are the tests that use llvm-dwarfdump and expect output from textual dumps.
More DWARF parser modification are coming in the next few weeks and I wanted to add tests that can verify that we can encode and decode all form types, as well as test some other basic DWARF APIs where we ask DIE objects for their children and siblings.
DwarfGenerator.cpp was added in the lib/CodeGen directory. This file contains the code necessary to easily create DWARF for tests:
dwarfgen::Generator DG;
Triple Triple("x86_64--");
bool success = DG.init(Triple, Version);
if (!success)
return;
dwarfgen::CompileUnit &CU = DG.addCompileUnit();
dwarfgen::DIE CUDie = CU.getUnitDIE();
CUDie.addAttribute(DW_AT_name, DW_FORM_strp, "/tmp/main.c");
CUDie.addAttribute(DW_AT_language, DW_FORM_data2, DW_LANG_C);
dwarfgen::DIE SubprogramDie = CUDie.addChild(DW_TAG_subprogram);
SubprogramDie.addAttribute(DW_AT_name, DW_FORM_strp, "main");
SubprogramDie.addAttribute(DW_AT_low_pc, DW_FORM_addr, 0x1000U);
SubprogramDie.addAttribute(DW_AT_high_pc, DW_FORM_addr, 0x2000U);
dwarfgen::DIE IntDie = CUDie.addChild(DW_TAG_base_type);
IntDie.addAttribute(DW_AT_name, DW_FORM_strp, "int");
IntDie.addAttribute(DW_AT_encoding, DW_FORM_data1, DW_ATE_signed);
IntDie.addAttribute(DW_AT_byte_size, DW_FORM_data1, 4);
dwarfgen::DIE ArgcDie = SubprogramDie.addChild(DW_TAG_formal_parameter);
ArgcDie.addAttribute(DW_AT_name, DW_FORM_strp, "argc");
// ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref4, IntDie);
ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref_addr, IntDie);
StringRef FileBytes = DG.generate();
MemoryBufferRef FileBuffer(FileBytes, "dwarf");
auto Obj = object::ObjectFile::createObjectFile(FileBuffer);
EXPECT_TRUE((bool)Obj);
DWARFContextInMemory DwarfContext(*Obj.get());
This code is backed by the AsmPrinter code that emits DWARF for the actual compiler.
While adding unit tests it was discovered that DIEValue that used DIEEntry as their values had bugs where DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref8, and DW_FORM_ref_udata forms were not supported. These are all now supported. Added support for DW_FORM_string so we can emit inlined C strings.
Centralized the code to unique abbreviations into a new DIEAbbrevSet class and made both the dwarfgen::Generator and the llvm::DwarfFile classes use the new class.
Fixed comments in the llvm::DIE class so that the Offset is known to be the compile/type unit offset.
DIEInteger now supports more DW_FORM values.
There are also unit tests that cover:
Encoding and decoding all form types and values
Encoding and decoding all reference types (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata, DW_FORM_ref_addr) including cross compile unit references with that go forward one compile unit and backward on compile unit.
Differential Revision: https://reviews.llvm.org/D27326
llvm-svn: 289010
Summary: The code we use to read PDBs assumed that streams we ask it to read exist, and would read memory outside a vector and crash if this wasn't the case. This would, for example, cause llvm-pdbdump to crash on PDBs generated by lld. This patch handles such cases more gracefully: the PDB reading code in LLVM now reports errors when asked to get a stream that is not present, and llvm-pdbdump will report missing streams and continue processing streams that are present.
Reviewers: ruiu, zturner
Subscribers: thakis, amccarth
Differential Revision: https://reviews.llvm.org/D27325
llvm-svn: 288722
PDBFileBuilder supports two different ways to create files.
One is PDBFileBuilder::commit. That function takes a filename
and write a result to the file. The other is PDBFileBuilder::build.
That returns a new PDBFile object.
This patch removes the latter because no one is using it and
in a real life situation we are very unlikely to need it.
Even if you need it, it'd be easy to write a new PDB to a memory
buffer and read it back.
Removing PDBFileBuilder::build enables us to remove other classes
build transitively.
Differential Revision: https://reviews.llvm.org/D26987
llvm-svn: 287697
This is required by DbiStream, but DbiStreamBuilder didn't align
these substreams, so the output of DbiSTreamBuilder couldn't be
read by DbiStream.
Test will be added to LLD.
llvm-svn: 287067
These numbers are intended to be capped at 65535, but
`std::max<uint16_t>(UINT16_MAX, N)` always returns N for any N because
the expression is the same as `std::max((uint16_t)UINT16_MAX, (uint16_t)N)`.
llvm-svn: 287060
This patch gets a DWARF parsing speed improvement by having DWARFAbbreviationDeclaration instances know if they have a fixed byte size. If an abbreviation has a fixed byte size that can be calculated given a DWARFUnit, then parsing a DIE becomes two steps: parse ULEB128 abbrev code, and then add constant size to the offset.
This patch also adds a fixed byte size to each DWARFAbbreviationDeclaration::AttributeSpec so that attributes can quickly skip their values if needed without the need to lookup the fixed for size.
Notable improvements:
- DWARFAbbreviationDeclaration::findAttributeIndex() now returns an Optional<uint32_t> instead of a uint32_t and we no longer have to look for the magic -1U return value
- Optional<uint32_t> DWARFAbbreviationDeclaration::findAttributeIndex(dwarf::Attribute attr) const;
- DWARFAbbreviationDeclaration now has a getAttributeValue() function that extracts an attribute value given a DIE offset that takes advantage of the DWARFAbbreviationDeclaration::AttributeSpec::ByteSize
- bool DWARFAbbreviationDeclaration::getAttributeValue(const uint32_t DIEOffset, const dwarf::Attribute Attr, const DWARFUnit &U, DWARFFormValue &FormValue) const;
- A DWARFAbbreviationDeclaration instance can return a fixed byte size for itself so DWARF parsing is faster:
- Optional<size_t> DWARFAbbreviationDeclaration::getFixedAttributesByteSize(const DWARFUnit &U) const;
- Any functions that used to take a "const DWARFUnit *U" that would crash if U was NULL now take a "const DWARFUnit &U" and are only called with a valid DWARFUnit
Differential Revision: https://reviews.llvm.org/D26567
llvm-svn: 286924
This patch defines a new function to add a SectionContribs stream
to a PDB file. Unlike SectionMap, SectionContribs contains a list
of input sections as opposed to output sections.
Note that this patch needs improving because currently we do not
set Module field in SectionContribs entries. In a follow-up patch,
I'll add Modules and then fix it after that.
Differential Revision: https://reviews.llvm.org/D26210
llvm-svn: 286677
https://reviews.llvm.org/D26526
- Fixed DW_FORM_strp to be correctly sized and extracted for DWARF64
- Added some missing strp variants as well
- Fixed comment typo
llvm-svn: 286603
In preparation for a follow on patch that improves DWARF parsing speed, clean up DWARFFormValue so that we have can get the fixed byte size of a form value given a DWARFUnit or given the version, address byte size and dwarf32/64.
This patch cleans up code so that everyone is using one of the new DWARFFormValue functions:
static Optional<uint8_t> DWARFFormValue::getFixedByteSize(dwarf::Form Form, const DWARFUnit *U = nullptr);
static Optional<uint8_t> DWARFFormValue::getFixedByteSize(dwarf::Form Form, uint16_t Version, uint8_t AddrSize, bool Dwarf32);
This patch changes DWARFFormValue::skipValue() to rely on the output of DWARFFormValue::getFixedByteSize(...) instead of duplicating the code in each function. This will reduce the number of changes we need to make to DWARF to fewer places in DWARFFormValue when we add support for new form.
This patch also starts to support DWARF64 so that we can get correct byte sizes for forms that vary according the DWARF 32/64.
To reduce the code duplication a new FormSizeHelper pure virtual class was created that can be created as a FormSizeHelperDWARFUnit when you have a DWARFUnit, or FormSizeHelperManual where you manually specify the DWARF version, address byte size and DWARF32/DWARF64. There is now a single implementation of a function that gets the fixed byte size (instead of two where one took a DWARFUnit and one took the DWARF version, address byte size and DWARFFormat enum) and one function to skip the form values.
https://reviews.llvm.org/D26526
llvm-svn: 286597
Previously support had been added for using CodeViewRecordIO
to read (deserialize) CodeView type records. This patch adds
support for writing those same records. With this patch,
reading and writing of CodeView type records finally uses a single
codepath.
Differential Revision: https://reviews.llvm.org/D26253
llvm-svn: 286304
Using a pattern similar to that of YamlIO, this allows
us to have a single codepath for translating codeview
records to and from serialized byte streams. The
current patch only hooks this up to the reading of
CodeView type records. A subsequent patch will hook
it up for writing of CodeView type records, and then a
third patch will hook up the reading and writing of
CodeView symbols.
Differential Revision: https://reviews.llvm.org/D26040
llvm-svn: 285836
This change enables LLD to construct a Section Map stream in a PDB file.
I do not understand all these fields in the Section Map yet, but it seems
like a copy of a COFF section header in another format.
With this patch, DbiStreamBuilder can emit a Section Map which
llvm-pdbdump can dump.
Differential Revision: https://reviews.llvm.org/D26112
llvm-svn: 285606
Modifying DWARFFormValue to remember the DWARFUnit that it was encoded with can simplify the usage of instances of this class. Previously users would have to try and pass in the same DWARFUnit that was used to decode the form value and there was a possibility that a different DWARFUnit might be supplied to the functions that extract values (strings, CU relative references, addresses) and cause problems. This fixes this potential issue by storing the DWARFUnit inside the DWARFFormValue so that this mistake can't be made. Instances of DWARFFormValue are not stored permanently and are used as temporary values, so the increase in size of an instance of DWARFFormValue isn't a big deal. This makes decoding form values more bullet proof and is a change that will be used by future modifications.
https://reviews.llvm.org/D26052
llvm-svn: 285594
Summary:
Fixes PR28281.
MSVC lists indirect virtual base classes in the field list of a class,
using LF_IVBCLASS records. This change makes LLVM emit such records
when processing DW_TAG_inheritance tags with the DIFlagVirtual and
(newly introduced) DIFlagIndirect tags.
Reviewers: rnk, ruiu, zturner
Differential Revision: https://reviews.llvm.org/D25578
llvm-svn: 285130
Summary: This adds support for dumping the globals stream from PDB files using llvm-pdbdump, similar to the support we have for the publics stream.
Reviewers: ruiu, zturner
Subscribers: beanz, mgorny, modocache
Differential Revision: https://reviews.llvm.org/D25801
llvm-svn: 284861
This was all using ArrayRef<>s before which presents a problem
when you want to serialize to or deserialize from an actual
PDB stream. An ArrayRef<> is really just a special case of
what can be handled with StreamInterface though (e.g. by using
a ByteStream), so changing this to use StreamInterface allows
us to plug in a PDB stream and get all the record serialization
and deserialization for free on a MappedBlockStream.
Subsequent patches will try to remove TypeTableBuilder and
TypeRecordBuilder in favor of class that operate on
Streams as well, which should allow us to completely merge
the reading and writing codepaths for both types and symbols.
Differential Revision: https://reviews.llvm.org/D25831
llvm-svn: 284762
This is just a quick utility handy for getting rough summaries of types
in a given object or dwo file. I've been using it to investigate the
amount of type info redundancy across a project build, for example.
llvm-svn: 284537
In the MS ABI, the frontend is supposed to MD5 such pathologically long
names. LLVM should still defend itself from long names, though.
Fixes part of PR29098.
llvm-svn: 284136
The previous commit was failing because we filled empty slots of
the debug stream index with kInvalidStreamIndex. It should've been 0.
llvm-svn: 283925
Previously, there is no way to create a stream other than pre-defined
special stream such as DBI or IPI. This patch adds a new method,
addDbgStream, to add a debug stream to a PDB file.
Differential Revision: https://reviews.llvm.org/D25356
llvm-svn: 283823
This is the first step towards round-tripping symbol information,
and thusly being able to write symbol information to a PDB.
This patch writes the symbol information for each compiland to
the Yaml when running in pdb2yaml mode. There's still some loose
ends, such as what to do about relocations (necessary in order to
print linkage names), how to print enums with friendly names, and
how to give the dumper access to the StringTable, but this is a
good first start.
llvm-svn: 283641
Type visitor code had already been refactored previously to
decouple the visitor and the visitor callback interface. This
was necessary for having the flexibility to visit in different
ways (for example, dumping to yaml, reading from yaml, dumping
to ScopedPrinter, etc).
This patch merely implements the same visitation pattern for
symbol records that has already been implemented for type records.
llvm-svn: 283609
When we create a PDB file using PDBFileBuilder, the information
in the superblock, such as the size of the resulting file, is not
available.
Previously, PDBFileBuilder::initialize took a superblock assuming
that all the members of the struct are correct. That is useful when
you want to restore the exact information from a YAML file, but
that's probably the only use case in which that is useful.
When we are creating a PDB file on the fly, we have to backfill the
members.
This patch redefines PDBFileBuilder::initialize to take only a
block size. Now all the other members are left as default values,
so that they'll be updated when commit() is called.
Differential Revision: https://reviews.llvm.org/D25108
llvm-svn: 282944
WritableStream needs the exact file size to open a file, but
until we fix the final layout of a PDB file, we don't know the
size of the file.
This patch changes the parameter type of PDBFileBuilder::commit
to solve that chiecken-and-egg problem. Now the function opens
a file after fixing the layout, so it can create a file with the
exact size.
Differential Revision: https://reviews.llvm.org/D25107
llvm-svn: 282940
The IPI stream is structurally identical to the TPI stream, but it
contains different record types. So we just re-use the TPI writing
code.
llvm-svn: 281638
We were inadvertently adding the size of the hash value stream to
the size of the TPI stream, even though the hash value stream is
an entirely separate stream.
llvm-svn: 281636
The `CVType` had two redundant fields which were confusing and
error-prone to fill out. By treating member records as a distinct
type from leaf records, we are able to simplify this quite a bit.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D24432
llvm-svn: 281556
This completes being able to write all the interesting
values of a PDB TPI stream.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D24370
llvm-svn: 281555
We have various command line options that print the type of a
stream, the size of a stream, etc but nowhere that it can all be
viewed together.
Since a previous patch introduced the ability to dump the bytes
of a stream, this seems like a good place to present a full view
of the stream's properties including its size, what kind of data
it represents, and the blocks it occupies. So I added the
ability to print that information to the -stream-data command
line option.
llvm-svn: 281077
This simplifies a lot of code, and will actually be necessary for
an upcoming patch to serialize TPI record hash values.
The idea before was that visitors should be examining records, not
modifying them. But this is no longer true with a visitor that
constructs a CVRecord from Yaml. To handle this until now, we
were doing some fixups on CVRecord objects at a higher level, but
the code is really awkward, and it makes sense to just have the
visitor write the bytes into the CVRecord. In doing so I uncovered
a few bugs related to `Data` and `RawData` and fixed those.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D24362
llvm-svn: 281067
This writes the full sequence of type records described in
Yaml to the TPI stream of the PDB file.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D24316
llvm-svn: 281063
Previously we were splitting our records at 0xFFFF bytes, which the
Microsoft tools don't like.
Should fix failure on the new Windows self-host buildbot.
This length appears in microsoft-pdb/PDB/dbi/dbiimpl.h
llvm-svn: 280522
With that change, images built with 'lld-link /debug' always have a
debug directory. If no PDB filename was passed on the command line, then
the filename in the executable is empty.
PDB information would never work anyway if the PDB file name is empty,
so go ahead and try DWARF in that case.
llvm-svn: 280410
Previously we were assuming that any visitation of types would
necessarily be against a type we had binary data for. Reasonable
assumption when were just reading PDBs and dumping them, but once
we start writing PDBs from Yaml this breaks down, because we have
no binary data yet, only Yaml, and from that we need to read the
record kind and perform the switch based on that.
So this patch does that. Instead of having the visitor switch
on the kind that is already in the CVType record, we change the
visitTypeBegin() method to return the Kind, and switch on the
returned value. This way, the default implementation can still
return the value from the CVType, but the implementation which
visits Yaml records and serializes binary PDB type records can
use the field in the Yaml as the source of the switch.
llvm-svn: 280307
We were kind of hacking this together before by embedding the
ability to forward requests into the TypeDeserializer. When
we want to start adding more different kinds of visitor callback
interfaces though, this doesn't scale well and is very inflexible.
So introduce the notion of a pipeline, which itself implements
the TypeVisitorCallbacks interface, but which contains an internal
list of other callbacks to invoke in sequence.
Also update the existing uses of CVTypeVisitor to use this new
pipeline class for deserializing records before visiting them
with another visitor.
llvm-svn: 280293
The shape of the vtable is passed down as the size of the
__vtbl_ptr_type. This special pointer type appears both as the pointee
type of the vptr type, and by itself in every dynamic class. For classes
with multiple vtables, only the shape of the primary vftable is
included, as the shape of all secondary vftables will be the same as in
the base class.
Fixes PR28150
llvm-svn: 280254
Zachary Turner