All G_CONSTANTS created by the MachineIRBuilder have an operand of type CImm
(i.e. a ConstantInt), so that's what the selector needs to look for.
llvm-svn: 296176
When we construct addressing modes, we use isNoopAddrSpaceCast to ignore
addrspacecast instructions. Make sure we insert the correct addrspacecast
when we reconstruct the addressing mode.
Differential Revision: https://reviews.llvm.org/D30114
llvm-svn: 296167
This optimisation was crashing when there was a chain of more than one bitcast
instruction to replace, as a result of the changes in D27283.
Patch by James Price.
Differential Revision: https://reviews.llvm.org/D30347
llvm-svn: 296163
Splitting critical edges when one of the source edges is an indirectbr
is hard in general (because it requires changing the memory the indirectbr
reads). But if a block only has a single indirectbr predecessor (which is
the common case), we can simulate splitting that edge by splitting
the destination block, and retargeting the *direct* branches.
This is motivated by the use of computed gotos in python 2.7: PyEval_EvalFrame()
ends up using an indirect branch with ~100 successors, and passing a constant to
each of those. Since MachineSink can't break indirect critical edges on demand
(and doing this in MIR doesn't look feasible), this causes us to emit about ~100
defs of registers containing constants, which we in the predecessor block, where
only one of those constants is used in each successor. So, at each computed goto,
we needlessly spill about a 100 constants to stack. The end result is that a
clang-compiled python interpreter can be about ~2.5x slower on a simple python
reduction loop than a gcc-compiled interpreter.
Differential Revision: https://reviews.llvm.org/D29916
llvm-svn: 296149
This patch merges the existing floating-point induction variable widening code
into the integer induction variable widening code, creating a single set of
functions for both kinds of inductions. The primary motivation for doing this
is to enable vector phi node creation for floating-point induction variables.
Differential Revision: https://reviews.llvm.org/D30211
llvm-svn: 296145
Provide a 64-bit pattern to use SUBFIC for subtracting from a 16-bit immediate.
The corresponding pattern already exists for 32-bit integers.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29387
llvm-svn: 296144
Emit clrrdi (extended mnemonic for rldicr) for AND-ing with masks that
clear bits from the right hand size.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29388
llvm-svn: 296143
The motivation for filling out these select-of-constants cases goes back to D24480,
where we discussed removing an IR fold from add(zext) --> select. And that goes back to:
https://reviews.llvm.org/rL75531https://reviews.llvm.org/rL159230
The idea is that we should always canonicalize patterns like this to a select-of-constants
in IR because that's the smallest IR and the best for value tracking. Note that we currently
do the opposite in some cases (like the cases in *this* patch). Ie, the proposed folds in
this patch already exist in InstCombine today:
https://github.com/llvm-mirror/llvm/blob/master/lib/Transforms/InstCombine/InstCombineSelect.cpp#L1151
As this patch shows, most targets generate better machine code for simple ext/add/not ops
rather than a select of constants. So the follow-up steps to make this less of a patchwork
of special-case folds and missing IR canonicalization:
1. Have DAGCombiner convert any select of constants into ext/add/not ops.
2 Have InstCombine canonicalize in the other direction (create more selects).
Differential Revision: https://reviews.llvm.org/D30180
llvm-svn: 296137
This time with the missing files.
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296134
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296132
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
Previously LLVM was assuming 32-bit signed immediates which results in and with
a bitmask that has bit 31 set to incorrectly include bits 63-32 in the result.
After applying this patch I can now compile all of the FreeBSD mips assembly
code with clang.
This issue also affects the nor, slt and sltu macros and I will fix those in a
separate review.
Patch By: Alexander Richardson
Commit message reformatted by sdardis.
Reviewers: atanasyan, theraven, sdardis
Differential Revision: https://reviews.llvm.org/D30298
llvm-svn: 296125
The Fuchsia ABI defines slots from the thread pointer where the
stack-guard value for stack-protector, and the unsafe stack pointer
for safe-stack, are stored. This parallels the Android ABI support.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D30237
llvm-svn: 296081
clang will generate IR like this for input using packed bitfields;
very simple semantically, but it's a bit tricky to actually
generate good code.
llvm-svn: 296080
Splitting critical edges when one of the source edges is an indirectbr
is hard in general (because it requires changing the memory the indirectbr
reads). But if a block only has a single indirectbr predecessor (which is
the common case), we can simulate splitting that edge by splitting
the destination block, and retargeting the *direct* branches.
This is motivated by the use of computed gotos in python 2.7: PyEval_EvalFrame()
ends up using an indirect branch with ~100 successors, and passing a constant to
each of those. Since MachineSink can't break indirect critical edges on demand
(and doing this in MIR doesn't look feasible), this causes us to emit about ~100
defs of registers containing constants, which we in the predecessor block, where
only one of those constants is used in each successor. So, at each computed goto,
we needlessly spill about a 100 constants to stack. The end result is that a
clang-compiled python interpreter can be about ~2.5x slower on a simple python
reduction loop than a gcc-compiled interpreter.
Differential Revision: https://reviews.llvm.org/D29916
llvm-svn: 296060
Summary: In case we do not know what the condition is in an unswitched loop, but we know its definitely NOT a known constant. We can perform simplifcations based on this information.
Reviewers: sanjoy, hfinkel, chenli, efriedma
Reviewed By: efriedma
Subscribers: david2050, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D28968
llvm-svn: 296041
This patch enables support for .f16x2 operations.
Added new register type Float16x2.
Added support for .f16x2 instructions.
Added handling of vectorized loads/stores of v2f16 values.
Differential Revision: https://reviews.llvm.org/D30057
Differential Revision: https://reviews.llvm.org/D30310
llvm-svn: 296032
FastISel wasn't checking the isFPOnlySP subtarget feature before emitting
double-precision operations, so it got completely invalid CodeGen for doubles
on Cortex-M4F.
The normal ISel testing wasn't spectacular either so I added a second RUN line
to improve that while I was in the area.
llvm-svn: 296031
While not CVP's fault, this caused miscompiles (PR31181). Reverting
until those are resolved.
(This also reverts the follow-ups r288154 and r288161 which removed the
flag.)
llvm-svn: 296030
Instead of stripping the longest common prefix off of the filenames in a
report, strip out the longest chain of redundant path components. This
fixes the case in PR31982, where there are two files with the same
prefix, and stripping out the LCP makes things less intelligible.
llvm-svn: 296029
Summary: SamplePGO uses branch_weight annotation to represent callsite hotness. When ICP promotes an indirect call to direct call, we need to make sure the direct call is annotated with branch_weight in SamplePGO mode, so that downstream function inliner can use hot callsite heuristic.
Reviewers: davidxl, eraman, xur
Reviewed By: davidxl, xur
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30282
llvm-svn: 296028
Having more fine-grained information on the specific construct that
caused us to fallback is valuable for large-scale data collection.
We still have the fallback warning, that's also used for FastISel.
We still need to remove the fallback warning, and teach FastISel to also
emit remarks (it currently has a combination of the warning, stats, and
debug prints: the remarks could unify all three).
The abort-on-fallback path could also be better handled using remarks:
one could imagine a "-Rpass-error", analoguous to "-Werror", which would
promote missed/failed remarks to errors. It's not clear whether that
would be useful for other remarks though, so we're not there yet.
llvm-svn: 296013
If a subreg is used in an instruction it counts as a whole superreg
for the purpose of register pressure calculation. This patch corrects
improper register pressure calculation by examining operand's lane mask.
Differential Revision: https://reviews.llvm.org/D29835
llvm-svn: 296009
This reverts commit r295749 while investigating PR32042.
It looks like this check uncovered a problem in the frontend that
needs to be fixed before the check can be enabled again.
llvm-svn: 296005
In OptimizeAdd, we scan the operand list to see if there are any common factors
between operands that can be factored out to reduce the number of multiplies
(e.g., 'A*A+A*B*C+D' -> 'A*(A+B*C)+D'). For each operand of the operand list, we
only consider unique factors (which is tracked by the Duplicate set). Now if we
find a factor that is a negative constant, we add the negated value as a factor
as well, because we can percolate the negate out. However, we mistakenly don't
add this negated constant to the Duplicates set.
Consider the expression A*2*-2 + B. Obviously, nothing to factor.
For the added value A*2*-2 we over count 2 as a factor without this change,
which causes the assert reported in PR30256. The problem is that this code is
assuming that all the multiply operands of the add are already reassociated.
This change avoids the issue by making OptimizeAdd tolerate multiplies which
haven't been completely optimized; this sort of works, but we're doing wasted
work: we'll end up revisiting the add later anyway.
Another possible approach would be to enforce RPO iteration order more strongly.
If we have RedoInsts, we process them immediately in RPO order, rather than
waiting until we've finished processing the whole function. Intuitively, it
seems like the natural approach: reassociation works on expression trees, so
the optimization only works in one direction. That said, I'm not sure how
practical that is given the current Reassociate; the "optimal" form for an
expression depends on its use list (see all the uses of "user_back()"), so
Reassociate is really an iterative optimization of sorts, so any changes here
would probably get messy.
PR30256
Differential Revision: https://reviews.llvm.org/D30228
llvm-svn: 296003
Summary: The discriminator has been encoded, and only the base discriminator should be used during profile matching.
Reviewers: dblaikie, davidxl
Reviewed By: dblaikie, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30218
llvm-svn: 295999
Sanjay Patel